Accidently resolved RAID 0 via diskutility. The disks are untouched and found as offline RAID disk. Any chance to put them togehther again?
I accidently resolved a RAID 0 with diskutility. The disks are untouched and found as follows:
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk0
1: EFI 209.7 MB disk0s1
2: Apple_RAID_Offline 2.0 TB disk0s2
3: Apple_Boot Boot OSX 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI 209.7 MB disk1s1
2: Apple_HFS CK 999.9 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk2
1: EFI 209.7 MB disk2s1
2: Apple_RAID_Offline 2.0 TB disk2s2
3: Apple_Boot Boot OSX 134.2 MB disk2s3
diskutil listraid
No AppleRAID sets found
The RAID disks are found and marked offline, is there any chance to put them together again?
You don't break a stripe array into two drives and have anything to work with, you can easily break a mirror raid though.
SoftRAID "takes over" and replaces from Apple's and can 'recover' an array.
You should never work with or run with a stripe RAID0 and not have a couple current backups - unless the array is just for scratch.
Data recovery only read the volume, and recovers to another physical hard drive, it is not done "in place." that would be disk repair type operations, such as Disk Warrior 4.4. Data Rescue 3 is what most people try to use first, demo mode. If it seems to work then $99 to buy.
SoftRAID 4 $129 might be your only choice though I think something is getting lost in translation as to what type and nature and its current state. Email support there, they will walk you through.
And have 3-4 more drives to work with. A large enough drive for backup, one for recovery, and two new drives taht you will want to initialize, zero, and use to build a new 2nd array. Say a pair of WD Black 1.5TB $159 each.
SoftRAID will test all your drive surface for defects during initialize (long format) and during idle background scan.
Similar Messages
-
I use Yahoo mail, and recently when I receive an emailed picture, the attachment is missing. I thought this was a Yahoo issue and contacted them. They told me to try Safari and the pictures in my mail account are visible. So I went back to Firefox, cleared my caches, history etc... and I updated Firefox, my ad-ons and restarted my computer and the pictures are still not visible via Firefox. I like using Firefox, but I need to be able to view pictures ( In place of the picture attachment is shows: 3.txt
I use Yahoo mail, and recently when I receive an emailed picture, the attachment is missing. I thought this was a Yahoo issue and contacted them. They told me to try Safari and the pictures in my mail account are visible. So I went back to Firefox, cleared my caches, history etc... and I updated Firefox, my ad-ons and restarted my computer and the pictures are still not visible via Firefox. I like using Firefox, but I need to be able to view pictures ( In place of the picture attachment is shows: 3.txt
-
I am using IDVD to make slide shows. The pictures are clear and of high quality when viewed on my computer. When I burn the slide show to a disk, the pictures are blury and of poor quality. Is there a setting adjustment to correct this problem?
I would re-post in the iDVD forum. You are likely to get a faster answer there. Good luck.
-
I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.
The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.
-
I accidentally created files using a Free Trial version of InDesign. Now the files are gone. Where did they go? How do I get them back? I pay for Creative Cloud... but used the wrong login apparently.
Files you save don't disappear, even if you no longer have the software that created them. They're right where you saved them.
-
A library on my hard drive became corrupted, so I over-wrote it from an external hard drive. When I now access the library on my hard drive, many of the images are vertical, and cannot be rotated other than one at a time. Ideas to correct this?
You had already done "Repair" and "Rebuild"? These usually takes scores of minutes or hours.
Does the Library on your external drive work from the external drive? Navigate to it in Finder and double-click the name.
If it does, delete the problem Library, empty the System Trash, reboot, Verify your system disk using Disk Utility (and might as well repair permissions while you're at it), reboot, test the external drive Library once more to confirm it works properly, then close it and copy the Library to your system drive. When the copying is done, double-click the Library (now on the system drive) and see what you get. -
My computer will no longer stream videos? The videos are choppy and show static?
Hello! My macbook pro just recently stopped streaming videos from facebook, youtube, hulu, etc... The videos are choppy and show static. The sound play back is fine but the picture is definitely unclear. I was hoping that there was a simple solution to this as I have never had an issue with this computer before.
Thanks,
CharlotteThanks, Lawrence. I figured that was what I was going to have to do in the end. I have a few games with quite a few hours invested, and I worry that I'll lose the progress I have as they do not save to the cloud. I may have to bite the bullet, and just take the plunge to resolve this. I just want a way to easily transfer my "Home Computer" for my iPhone. My laptop is years old and in need of being replaced, and it's about time to upgrade my phone. These life events piling up are making me consider switching to a friendlier OS. I'm not using this as a threat. I just hope some apple high up will read this, and realize that we need alternatives. Life happens.
Thank you both Paul and Lawrence. I clicked "This helped me" not knowing it would remove the option to choose "This fixed my problem" too. For anyone else reading this thread. Using the guide provided has done both. It has helped me and given me a fix to my current problem. Lawrence has also provided me with the last bit of information I feel is missing from wjosten's guide. That syncing will completely erase all of your data and reinstall it in one fell swoop. It's a great fix. Even if it isn't the exact one I wanted. Thank you again! -
Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit
Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
* https://support.mozilla.com/kb/Mozilla+Crash+Reporter
* https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report -
Okay. I am totally in a bad situtation. I have IOS 6 and 2 things have gone wrong. The Music app where you have your music, is bad. I have songs and stuff. And when i touch a song nothing happens. The letters are grey and nothing happens. The app store is also a problem. The appstore on IOS 6, when im on search and i search for and app, it exits the app store in like 5 seconds. And when i first updated the IOS 6, it was still like that HELP!
Did you do a restore from iTune or iCloud backup recently?
-
When I create a playlist and sync it to my iPhone not all of the songs on the playlist transfer over. All of the songs are there and are playable they just do not show up on the playlist. For example, in itunes on my computer a playlist has over 100 songs, but when I sync my phone, my iphone only shows 60 songs. I can go into my phone and add the missing songs to the playlist, but the next time I sync my phone the songs are gone again.
Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613 -
My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Please help me. Some of the websites show thier icon normally.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3Yes, it doesn't work. I ran in safe mode. nothing changed. I uninstalled Mozilla firefox with only standard removal, no change. I finally uninstalled Mozilla with complete removal and reinstalled it, then it return to normal. Why does this happen? Thanks for your reply.
-
I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me build the string .Below is the query and the out put. ( the string is building fine except the parameters are with out quotes)
here is the procedure
create or replace
procedure temp(
P_MTR_ID VARCHAR2,
P_FROM_DATE IN DATE ,
P_THROUGH_DATE IN DATE ) AS
L_XML CLOB;
l_query VARCHAR2(2000);
BEGIN
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
',''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
','' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
SELECT DBMS_XMLQUERY.GETXML('L_QUERY') INTO L_XML FROM DUAL;
INSERT INTO NK VALUES (L_XML);
DBMS_OUTPUT.PUT_LINE('L_QUERY IS :'||L_QUERY);
END;
OUTPUT parameters are in bold (the issue is they are coming without single quotes otherwise th equery is fine
L_QUERY IS :SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),'9999999.000') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),'$9,999,999.00') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),'9999999.000') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,'mm/dd/yyyy') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,'hh24:mi'), '00:00','24:00', TO_CHAR(s_datetime+.000011574,'hh24:mi')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '1'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,'DD-MON-YY') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '2'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,' DD-MON-YY') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)The correct way to handle this is to use bind variables.
And use DBMS_XMLGEN instead of DBMS_XMLQUERY :
create or replace procedure temp (
p_mtr_id in varchar2
, p_from_date in date
, p_through_date in date
is
l_xml CLOB;
l_query VARCHAR2(2000);
l_ctx dbms_xmlgen.ctxHandle;
begin
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,'' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
l_ctx := dbms_xmlgen.newContext(l_query);
dbms_xmlgen.setBindValue(l_ctx, 'P_MTR_ID', p_mtr_id);
dbms_xmlgen.setBindValue(l_ctx, 'P_FROM_DATE', to_char(p_from_date, 'DD-MON-YY'));
dbms_xmlgen.setBindValue(l_ctx, 'P_THROUGH_DATE', to_char(p_through_date, 'DD-MON-YY'));
l_xml := dbms_xmlgen.getXML(l_ctx);
dbms_xmlgen.closeContext(l_ctx);
insert into nk values (l_xml);
end; -
My computer is shutting down before fully booting up. I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files. Can anyone suggest what I should do next?
So, you can't Install OSX to the external?
Or you can't boot from it when you do?
You're not the only one wondering... I'm reminded of the Goose that laid the Golden Egg story. -
Okay so i had an iphone 5. I backed it up on icloud. Then i got the new iphone 5s i restored ot from icloud from my previous iphone 5. Now everything works find execept now the games are slowy and drops the frame rate and look choppy. Then i restarted my iphone 5s as a new device downloaded the same apps even the ones optimized for ios 7 and the games still lag. And i just got my iphone 5s replace. The funny thing is. While im playing games and their running choppy and slow and if i take a snap shot inside the phone. They run smooth and HD but just for a few seconds and boom they go back to slow and choppy. Is it the ios 7 or the iphone 5s it self? Like i said this is my replacement iphone 5s because the other 5s did the same thing. And it was running slowly.
As far as I know you can't delete the primary email address for an iCloud account. It's assigned when the account is created. But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password. Are you sure the account wasn't still on your phone when you gave it to him?
You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't. Make an appointment with the genius bar at a nearby Apple store and have them take a look at it. If necessary, they should be able to contact iCloud support for you. -
I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?
Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)
Maybe you are looking for
-
I am not Able To update My apps because The old Apple id keeps apearing.
-
Adobe Acrobat Pro 9.5.5 Redactions apply on all pages of document
When I redact text on the first page of a document, the redaction marks appear on every other page of the document, I can not find a way to apply the redactions to only one page. I am trying to figure out how to have the redactions just appear on one
-
How do I include the heading of the table of contents in the table of contents?
I am preparing a table of contents in InDesign CS3 (Macintosh OSX 10.5.8) I have added all the paragraph styles to the list of paragraph styles I want to appear in my Table of Contents. However, I would also like the table of contents itself to appea
-
Multiple conditions in Querey builder Help
I'm trying to have search form provide the customer with several items to search for. I would like to for example have a url that looks like this ?zone=3,4,5&cost=9,10,11 and have those results be read by the Querey and return all the records that ha
-
MAC Clean Access Agent - Temp Certificate
Trying to get a Mac OS X client working with Clean Access. Got the agent loaded however everytime we try to authenticate it prompts with an error about communication issues and says that if we are using a temporary certificate (which we are) we need