Accordian panel not resizing between records
I have a spry table on the left of my page and when you click
a row the detail of the row will appear in an accordian to the
right. The accordian has two tabs on it - the top one contains data
that always fills the same height between records, but the lower
one has data that changes in height between records.
When I select a row and click on the lower tab for the first
time the tab will expand to fit the data correctly. However, if I
move to other rows in the table and leave the lower tab open, the
accordian will not expand/contract to fit the new data - it stays
the same height as the first row clicked. In order to get it to
resize I have to click on the top tab of the accordian (therefore
closing the lower tab) then reclick on the lower tab and it resizes
correctly. I hope I have explained this correctly.
If you'd like to see what I mean go to
http://66.148.0.112/orderstatus/249000/test.asp
and try it out for yourself.
Simon
Hello Simon,
This problem appears because when you open a panel we are
animating the transition from the element current height to 0px and
the other way around by setting a gradual fixed height. Because of
this the last height value used to animate will remain set to the
element. When you change the content into the Panel, the Panel is
no longer able to resize automatically. Unfortunately there is no
solution to this issue other then to disable the animation by
passing "enableAnimation" option to false into the constructor.
Regards,
Cristian
Similar Messages
-
Spry Accordian Panel not showing?? What am I missing?
http://www.neighbor.org/plan_giving2.htm
Take a look at the last accordian panel, it is not showing fully, but you can still click on it depending in what browser. How do I adjust it to show fully - The Planned Giving Council Tab.
Thanks,
TDI'm not seeing the problem on any of my browsers, but I see you have built the page in Frames, which are an old technology, and a little hard to troubleshoot from here.
It could be that the height of your Accordion is falling deeper than the Browser Viewport, then being hidden by the bottom of the Frame. Try shortening up the accordion; there could be a little space taken out between the accordion tabs.
Beth -
Spry accordian panel not closing
I have created a page using both the spry tabbed panels and
accordian panels. The accordian panels are in the content sections
of the tabbed ares. I want the accordian panels to be closed
initially, and whenever you click on the tab of the panel it will
open if it is closed, and close if it is open. I have modified the
code (as described in the Adobe Resource section) at the bottom of
the div. I got it to work on a simpler page (without the tabbed
panels) but I can't get it to close when click on if open. It will
close if another tab is clicked, but that isn't what I want. I'm
thinking it has something to do with the fact that it is in the
tabbed panels spry, or I am overlooking something. I am not very
verse in javascript, so I can't troubleshoot it. Can someone look
at the code and suggest a solution? The site is
http://www.capitolphotointeractive.com/testHi amilesslady,
You'll need to replace the version of the SpryAccordion.js
file on your site with a more recent one. You can get the the one
from Spry 1.6.1 here:
http://labs.adobe.com/technologies/spry/widgets/accordion/SpryAccordion.js
Or you can download the Dreamweaver 1.6.1 updater and use it
to update the Spry related files in Dreamweaver and your sites.
http://download.macromedia.com/pub/labs/spry/1/spry_p1-6-1_updater_022508.mxp
--== Kin ==--. -
Spry Accordian Panel not Working in IE6
I'm designing on a Mac in Dreamweaver CS3 and the Spry widget
Accordian is not expanding right when testing in IE6. Does anyone
know if there is a fix for this?
MissyThe samples work fine In IE6.
So if u can give us a piece of code & constructor or a
online url so we could investigate this behavior. -
Panel not resizing for high-resolution monitors
Received this in an email from a person using an HTML5 panel: "What I'm seeing on a high resolution monitor (3840x2160) is that the panel doesn't resize to fit its container."
The container for the panel is appears to have scaled up, but the panel itself is tiny within this container.
The pixel dimensions on which the panel was built (and what's coded into the HTML for the panel) makes the panel the correct size on "normal" monitors, but it doesn't appear to up rez for high-resolution monitors. The user can scale the rest of Photoshop's menus and panels using some interface in the OS, but the panel doesn't scale.
Anyone have any thoughts on this weather or not it's possible to get panels to up-rez for high-resolution monitors?
Thanks.qsea wrote:
Why is there no scaling for high resolution monitors in Adobe Bridge CC?
Photoshop CC, Illustrator CC and Indesign CC have 200% scaling…
Inconsistency between or among applications in the artificial "suites" should come as no surprise.
The "suite" concept is a fabrication of Adobe marketing and bean-counting types. The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one. -
Accordian panels not displaying all content
I'm using the accordion panel spry. But, the panels are a
fixed height and don't change depending on the amount of content
that is inside of them. How do I change that? I don't want a scroll
bar for overflow like the default. I just want the panels to open
to show all of the content.
This is my page:
http://creative.generalgrowth.com/jeremy/b2btest/clients.html".V1" <[email protected]> wrote in message
news:gnhlic$8k0$[email protected]..
>
quote:
Originally posted by:
MisterEggMan
> >> var Accordion1 = new
Spry.Widget.Accordion("Accordion1",
> {useFixedPanelHeights: false});
>
> Where in the code does this go?
>
> Check the source code of your page, search for your own
Accordion
> constructor
> and add the option.. Its probably under your accordion
or at the bottom of
> your
> page.
> @AL
> its not bad design decision, the outline is actually an
accessibility
> features
> of browsers its there for a reason..
You're absolutely wrong. I can't even discuss this without
getting
indigestion. If you really believe that putting focus on the
whole bleedin
widget is accessible in the context of web UI conventions,
then there is
nothing more I can say to you except to reiterate that you
are very wrong.
Spry does not work as expected with a keyboard. I submit that
the only
people who would know how to use a spry widget with a
keyboard are you, the
couple of guys who developed Spry, and anyone who has read
through the Spry
documentation, as well as a few people around here who like
to fire me up
for entertainment.
> And there is nothing wrong with Spry Accordions so its
utterly useless
> that
> you even recommend an other script.
Moo is a superior script with much more refined behaviors and
works as
expected with a keyboard.
Al Sparber - PVII
http://www.projectseven.com
The Finest Dreamweaver Menus | Galleries | Widgets
http://www.projectseven.com/go/pop
The Ultimate DW Menu System -
Server 2008R2 with AD DNS Panel not showing any records only shows the zone name
Hi All new to the Form. We have had this new domain controller running dns for a few years now and recently I went to edit some DNS records and found them missing in the DNS console the zone names are there but nothing is under the zones just one record
for the server under our AD domain. If i do a nslookup to this server it still displays the records as it should. It is also setup to forward the zones to a secondary server which is only pulling info from this Master 2008R2 server. Any ideas where i can try
and recover the records for my Zones.
ThanksHi,
According to your description, there are several possible reasons resulting in the DNS records disappearing.
1. If the aging and scavenging was configured in the DNS server, scavenging can cause records to disappear. Even Windows-based computers that have statically assigned servers register their records every 24 hours. Verify if the
No-refresh and Refresh intervals are too low. For example, if these values are both less than 24 hours, then we will lose DNS records. To view the settings, right-click the zone in the DC, click
Properties, click Aging.
2. Is there a DHCP server in your environment? DNS Dynamic Update Protocol updates to existing records fail can also cause them to be deleted by the scavenging process as aged records.
Also, event logs are helpful to isolating the issues. Is there any event logs in your computer?
For more details about DNS records disappearing, please refer to the link below,
DNS Records Disappearing and DNS Auditing
http://msmvps.com/blogs/acefekay/archive/2010/12/09/dns-records-disappearing-and-dns-auditing.aspx
Using AD Recycle Bin to restore deleted DNS zones and their contents in Windows Server 2008 R2
http://blogs.technet.com/b/askds/archive/2010/08/12/using-ad-recycle-bin-to-restore-deleted-dns-zones-and-their-contents-in-windows-server-2008-r2.aspx
Best Regards,
Tina -
Working on Windows XP SP2, IDCS3. A friend's paragraph panel and one other panel will not resize. All other panels function normally.
We tried:
- Resetting her preferences
- Resetting her panels
- Closing and reopening the particular 2 panels
- Moving the panels to different parts of the screen (docked, undocked)
No luck. Any ideas?Hit http://www.pixentral.com.
Read the directions. When the image you upload is processed and displayed, scroll down below it and copy ALL of the code in the box next to "HTML". (Ignore the "Forum" code box)
Paste that copied code into a message here. It will generate and display a thumbnail; clicking on the thumbnail takes you to the full size image you uploaded. -
Execution results panel does not show deleted records
Hi,
For OWB 10.2.0.2, i can succesfully run the mapping. But the Excution Results panel does not show deleted records. Shows 0 eventhough it actually did delete the records.
Does anyone have suggestions?
Thanks,
RajHi,
According to your post, my understanding is that you saw the different results for everything and people search tabs.
It is by design in SharePoint 2013.
There are four search experiences that are available on a default enterprise Search Center results page. Each search experience uses a different result source.
Everything search experience use Local SharePoint Results sources.
People search experience use Local People Results sources.
Local SharePoint Results specify all items from the local SharePoint search index except People items.
Local People Results specify People items from the profile database of the User Profile service application.
More information:
Understanding result sources for search in SharePoint Server 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
How to control the space between records in form layout
Hi ,
I need to display mutiple records (15-20) in a form ,
and have choosen FORM layout as I need to display each record in two lines (Can a record be displayed in two lines in TABULAR layout ? ) .
Now There is lot of space between each record and I could not move records closer . How can I control space between reords in FORM layout ?
(While creating Canvas I selected Distance bwteen records = 0 )
Thanks in advance,
AshaAsha,
no in tabular layout there is no way to display a record on two lines. All you can do is to use a stacked canvas and use it to make the table scrollable horizontally
The distance between record setting is a property on the item level. if this is set to 0 (please double check) then all that is loeft is the item bevel. You can set the item bevel property to plain and then work on resizing the items hight until close to acceptable.
Frank -
Exchange rate is different between records in OB08 and records in document.
Hi Gurus,
The exchange rate is different between records in OB08 and records in calculated amount in line item. How does it happen? Not all of the documents in the same period has this problem.
For example, a document A created by FB05 on Jun 30 2010.
In OB08, the exchange rate is 6.80000. This rate was the same in the header of document A.
In the line item of doc A, I calculated the amount for line itme 1 and 2. Line itme 1 shows the exchange rate is 7.90000. Line item 2 shows the exchange rate is 16.0000. ( The exchange rate is not that exactly an interger. I put a similar exchange rate as an example.)
Could you please throw some light on these? Why some documents are okay but for some, the exchange rate is so different?
I just found that the exchange rate of some of the document line item calculated is from another currency. It shows in the line item (in question) button "More Data". Shall I know how the exchange rate was got from another currency exchange rate?
Thank you.
Emma
Edited by: qun yang on Aug 2, 2010 10:49 AMIssue solved by below solution:
Existing:
append lines of vit_final to s_s_if-maxsize to e_t_data.
delete vit_final to s_s_if-maxsize.
else.
append lines of vit_final to s_s_if-maxsize to e_t_data.
delete vit_final to s_s_if-maxsize.
New:
append lines of vit_final to e_t_data.
delete vit_final to s_s_if-maxsize.
else.
append lines of vit_final to e_t_data.
delete vit_final to s_s_if-maxsize. -
I've just installed TB 24.4.0, Lightening 2.6.4 and Provider for Google Calendar 0.25
Win 8.1 64-bit (I use desktop 99.9999% of the time)
Dell XPS 18, 8gb RAM, C: has 363 GB Free
What is happening is on the mail tab the "today pane" always uses 1/2 the window. I can not resize it.
https://dl.dropboxusercontent.com/u/90621425/Mail%20tab.png
also when I'm on the Add-ons tab
On the calendar tab it acts normal:
https://dl.dropboxusercontent.com/u/90621425/calendar%20tab.png
as well as the tasks tab
you will also notice the x to close it and the "today pane" button at the bottom of TB don't display either.
It seemed to work until I installed "Google Tasks Sync", I removed that plug-in and nothing has changed. Has anyone seen this before?
Love the visual upgrade to this mail client, I've been using WLM 2012 forever, but its having issues with Google Play emails. Add to that its possible to have outlook.com accounts in TB and the calendar and this client is head and shoulders above.
I'll surely donate once I can keep the today pane displayed (in a reasonable size) on the mail tab.* Make sure ThunderBird is closed before proceeding.
* Locate '''localstore.rdf''' file from your TB profile folder (default Windows: ''C:\Users\{USERNAME}\AppData\Roaming\Thunderbird\Profiles\{randomletters}.default\'' ).
* Open it in a text editor: I like [http://notepad-plus-plus.org/download Notepad++ ].
* Find and edit the line to look like the one below: (modewidths and width; probably have crazy values)
<RDF:Description RDF:about="chrome://messenger/content/messenger.xul#today-pane-panel"
collapsedinmodes=","
modewidths="200,200,200"
width="200" />''
* Save the file and open TB. -
Navigation between records in a JSP application
Hi,
I would like to know how to provide navigation between records in a tabular form liked JSP application using JDeveloper 3.2
without using the Oracle or Default template.
I can do it with a singular record view but not in a tabular view. I like to know now I can mimic the navigation provided in Oracle template in which the current selected record is hightlighted. Can we navigate between records using Up and Down
arrow key like in Oracle form instead of using Navigation Bar. Please provide details code.
Thanks a bunch,
Khanh HoangYou can refer to the source code in jbohtmlsrc.zip for deriving your own implementation.
-
When I do setText on a Label which I created empty it does not resize correctly so the whole text is not visible. What more should I do to make it resize? myLabel.invalidate() dos nothing to it.
The Label is added to a Pane which is in its turn added to another Pane which is added to an applet. Thanks for any help!I think you should invalidate or validate the Container containing the Label.I do that:
Container lParent = pComponent.getParent();
lParent.invalidate();
lParent.validate();
It also depends on which LayoutManager you are using and how big that Container is.Take a look at the result here: http://apollo.nu/~ben/sunlabel.jpg
1. The blue is a panel with borderlayout.
2. The red and green are two panels with GridLayout(10, 1)
which are added to the blue panel using:
add(BorderLayout.WEST, mLabelPanel);
add(BorderLayout.CENTER, mControlPanel);
3. The smaller panels with labels are using FlowLayout(FlowLayout.LEFT)
and added to the red and green panel using:
add(lPanel)
In any case it is the LayoutManager of the parent Container that >decides how much space the Label gets, however most LayoutManager will >ask the getPreferredSize() of the Label, which is the space needed to >show it's entire text in it's current font. java.awt.DimensionCould there be a bug in getPreferredSize() for Label in 1.1.8?
I tried the same with an empty Button for which I set the text later and for that it DOES work using getPreferredSize(), it gets the correct size with either that or my calculation.
I get the following result for getPreferredSize():
java.awt.Dimension[width=14,height=23]
using my own calculation:
FontMetrics lFontMetrics = getFontMetrics(pComponent.getFont());
Dimension lStringSize = new Dimension(lFontMetrics.stringWidth(pText), lFontMetrics.getHeight());
I get this result:
java.awt.Dimension[width=21,height=15]
See the marks in the image for 14 and 21. getPreferredSize() obviously gives too little space. The label should say "fr�n" and not "fr�".
Thanks for your time! -
Navigate between records, ViewLink problem...
Hi, all! I will try to explain my problem. If something is not clear the pleas let me know.
So, I have two VO: UzglabasanasDati and VidesDati. These VO have related with VL (UzglabasanasDati_VidesDati1) with 1 to 1 relationship. When I open UzglabasanasDati VO then I can navigate records, please see: http://my.jetscreenshot.com/2677/20110427-gqjl-85kb
But when I open VidesDati VO the I can't navigate between records, pleas see: http://my.jetscreenshot.com/2677/20110427-6dvw-89kb
In my case I need that when I open UzglabasanasDati Form (jspx page) then I can navigate records and then go to the correct VidesDati Form (jspx page) record (this I can do with my created VL UzglabasanasDati_VidesDati1) BUT I also need to navigate on the other hand - open my VidesDati Form, navigate between records and then go to UzglabasanasDati Form correct record. (This I can't do with the same VL UzglabasanasDati_VidesDati1).
I do not understand where I am wrong? :( And what to do to resolve this problem? If You need more information, let me know.
Hope for Your help, best regards, Debuger!Hi,
I think that things are bit confused here,
First of all if you are already filter VidesDati from UzglabsanasDati, you cannot see other rows than the ones pointing to UzglabsanasDati.
That is why you cannot do the opposite filter. The first is already filtered.
To my Opinion, you need Another Two different ViewObjects with the opposite Link.
With Both Links on the same VOs, you will always have a VO filtered as a child.
Hope this Will Help You
Regards,
Dimitris.
Maybe you are looking for
-
Error in Pre-install of patch 9239089
we are in Pre-install Tasks of patch 9239089 for windows server 2008. Executed the envshellPROD_srv-moc environment file then performed the below steps Usage: 1. Create $ORACLE_HOME/appsutil/admin on the database server. copy adgrants_nt.sql (W
-
Dear Experts, Is it possible to add a Key Figure in the report without adding in the Query Design? Kindly provide the steps. Regards KV
-
Inconsistent results in default macros with Product exclusion/ Inclusion.
Hi All, I have a default macro - Macro I, that is required to be executed for a set of products, so have given a generic condition as ACT_PRODUCT( 9AMATNR) CP 12XX*, ( reqd to run for all the products of 12 XX series.) totally we have around 10 such
-
How to open multiple websites using Safari
Just wondering why i can only open one web site at a time with safari. I have to close the site I'm looking at to open another. Can anybody tell me why. Thanks very much.
-
until yesterday I was using Adobe Media Encoder both from AFX and Premier, and as a stand-alone application as of today, it wont launch at all