Accordion Plug-in
Hello there,
My site:http://bhc.edu.in/MATICS/about.php
I have used accordion plug-in from this site http://jqueryui.com/accordion/#default
I used the source code of default functionality.But i couldn't get the result.But i tried it in a test page.
http://bhc.edu.in/MATICS/Accordion_test.html
It works.
Please help me.
Line 20: <script src="menu/js/jquery-1.7.2.min.js"></script>
Line 82: <script src="//code.jquery.com/jquery-1.10.2.js"></script>
Line 94 <script src="https://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js">
You may not call the jQuery library more than once.
Similar Messages
-
Flash CS6 publishing issue using accordion plug-in
I apologize if I have limited info on this issue. i'm providing remote support and my user is only providing limited intel...
I have a user running Flash CS6 and has designed a site using the accordion plug-in with XML. When she publishes it from her Mac (10.6.8) then views it the SWF doesn't play nicely. The buttons function for a short period then freeze. She had another user open and publish from a PC using CS5 it works fine. They've compared the code between the 2 and there are supposedly no differences. She has this problem when publishing from CS4 as well (again, on Mac, 10.6.8). To add to the confusion, I've been sent the URL to both her version published from the Mac, supposedly not working correctly, and the version published from the PC. I've tested them both in Chrome, Safari, and Firefox on my Mac, and Chrome, Firefox, and IE on my PC and I'm not seeing any issues.
Anyone have any ideas?Most accordion components I know need an additional xml file to fill them up with content.
This must be loaded properly into the swf, to make it show sth.
if you only have a swf file to test, its likely that the xml was left out. -
IE page refresh when using an accordion menu
Hi, I have a page which has a jquery CSS styled nested accordion plug in. It's all working just so sweet, opening up menus and submenus which link to relevant pages. When the user navigates onto another page, and then goes back to the page with the accordian on it, it's should all remain open in the same state as it was when they left so they know where they were. That's what it does in Firefox. But in IE, when the user clicks the back button, the page seems to refresh and the accordian is all closed up again. Is there any way to make IE behave as Firefox does? Can I code a ''go back" link which returns them to the page exactly as it was when they left it?
Here it is >>> http://www.comraderysportstours.com.au/indextest.html
-
Open an accordion widget in the closed state?
I have searched the forums but have yet to find a resolution
for this issue. I am using an accordion widget and would like for
all of my panels to appear closed when the page initially loads.
Only once the user has clicked the tab do I want the panels to
open. Any suggestions that do not require me to buy a separate plug
in? Thanks.This is directly from the Adobe documentation:
http://labs.adobe.com/technologies/spry/samples/accordion/AccordionSample.html#AllPanelsCl osed
However, one thing to keep in mind is that this is assuming
that you are using the 1.6.1 update (as that is what the references
refer to). If you have never updated your Spry this would be a good
opportunity to do so. The below is the to the official Spry
homepage. There you will find the update package which includes
some samples and an Extension. Install the extension and restart
DW. Then under the Sites menu you will see a new option to update
Spry. Run that script and your Spry will be updated. Also on that
homepage is a link to the official Spry forums:
http://labs.adobe.com/technologies/spry/home.html -
How to create anchor links within a spry accordion?
I am using the spry accordion from DW CS6. HAving 6 panels.
I want to do this but can't manage it the usual html way...and I am clueless about javascript:
I want to create a wordlink that forwards people to the content of a different panel within the same accordion.
I tried the usual naming of anchor and creating link to such but nothing happens. I googled a bit for answers but I come up with js and that is abracadabra to me. The names in the js are nothing likie html classes that I can target so I have no clue what to do.
Any help would be very appreciated on this matter.
One other problem I am having is this:
My accordion is broken in the Opera browser....anybody an idea what causes this? Do I miss some plug in my browser?I am using the spry accordion from DW CS6. HAving 6 panels.
I want to do this but can't manage it the usual html way...and I am clueless about javascript:
I want to create a wordlink that forwards people to the content of a different panel within the same accordion.
I tried the usual naming of anchor and creating link to such but nothing happens. I googled a bit for answers but I come up with js and that is abracadabra to me. The names in the js are nothing likie html classes that I can target so I have no clue what to do.
Any help would be very appreciated on this matter.
One other problem I am having is this:
My accordion is broken in the Opera browser....anybody an idea what causes this? Do I miss some plug in my browser? -
Spry Accordion Widget Init Closed, Without Snap?
(This is a topic discussed in
another
thread, but I didn't want to hijack the thread with my own
question, so I started a new one...)
I want to start my Accordion widget in a closed state. I
figured out the trick of setting the default panel to '-1' and
turning fixed heights by altering the code in the footer of the
page to:
var Accordion1 = new Spry.Widget.Accordion("Accordion1",
{defaultPanel: -1,
useFixedPanelHeights: false});
When you do this, however, the page loads with the first
accordion panel open and visible for a split second until the page
is loaded, at which point the widget snaps the panel shut. This is
very ugly and undesirable, especially given that this accordion is
on a page element common to every page on the site.
I've tried setting an initial class that is hidden, however
the Spry Accordion widget is written in such a way that it
preserves whatever classes you have rather than replacing them.
Does anyone know a way to load the page with the accordion
panels shut without this initial flash of the first panel snapping
shut?
Thanks,
SteveHey Al,
Nice plug for your own application! Here is another one,
since I am one of your happy customers.
I used the Spry widgets in the new DW CS3 and spent a couple
of days trying to tweak things to get them to work the way I
wanted. After getting input from my brother (his site that I am
working on) he really wanted some more style than what I was coming
up with using the basic DW widget. I smacked my dollar on the
barrel head and tried out PVII Accordion instead.
I can't tell you how fast and easy it was to insert and
customize this plugin. Not to mention they had some nice little
themed styles, one of which (the cobalt blue) was a real close
match to the color scheme I originally was using! (PS - any chance
of getting more theme styles down the road for this plugin or
matching styles for the other ones???)
Changing the open or closed state of the panels - it was so
simple!!! I simply went into the modify option and chose the number
that corresponded to my different panels in the menu list. My buddy
used an expression about DW CS3 that fits nicely with using tools
like PVII Accordion Magic. You can use a screwdriver with some
precision and a lot of hand strength to build what you want but it
will take you alot of time...or you can plugin a power drill and be
done with it!
To see it in action on my current work in progress go to:
http://www.dvdflashbacks.com/williamsburghealth/index.php
As for sstringer's original question - how to do this in DW's
Spry widget...
I think you are onto the right track with the -1 setting. If
I am not mistaken though, Spry uses 0 for the first panel, so I
think you would need to use an option like {defaultTab: 1} to open
the 2nd panel and so on.
PS - Just so everyone knows - I am not a sales person for
PVII - just a very satisfied customer! -
My accordion looks fine in all browsers except IE7.
http://www.ferraripartsexchange.com
I click the tabs, IE7 adds a slight background-colored margin
to the bottom of each tab.
It doesn't look all that bad, really, but I would like to get
rid of it.
Any ideas?
If you know a piece of code that makes it work properly,
please tell me exactly where to put the code.
Thanks!
GregYou're clicking on the downward pointing arrow at the end of the QuickTime controller?
This is supposed to open a dialog window that shows the installed version of the QuickTime browser plug-in. Don't know why it crashes IE for you. It doesn't happen on my PC using IE 7 and XP. -
Accordion effect for horizontal tabs
Hello,
Can someone give me direction on how or if the Spry Framework
can take a horizontal row of tabs and create an accordion effect in
the same footprint below the tabs? I'm looking to create a row of
graphical tabs and then based on which tab is selected a panel
reveals it's self below the row of tabs in an accordion fashion.
Is this possible or am I looking at a "roll your own"
solution or some other effect / framework?Look for "bad TV" or "rewind" presets on ze web. There are a couple of them available, either from tutorials or direct downloads. There are even plug-ins (GenArts Sapphire, Digieffects, Boris Continuum) in many effects packages. Of course you can always build your own from effects like Venetian Blinds, Fractal Noise, various channel and distortion effects. All depends on your experience and what specific look you're after.
Mylenium -
Is it possible to drag and drop accordion tabs, so that I can
rearrange its children?Hi,
Do you get any error message/code?
Based on your description, I would like to suggest you try the following to check the issue:
1. Run Internet Explorer Performance Troubleshooter.
The Internet Explorer Performance Troubleshooter is an automated tool which will check for any performance issues which are common with the Internet Explorer on the computer and provides the details on how to fix them. Follow these steps and run the troubleshooter.
a. Press “Windows Logo” + “W” keys from the keyboard.
b. Type “Troubleshooting” in the search bar and press “Enter”.
c. In the “Troubleshooting” window, click on “View All” on the left pane.
d. Click on “Internet Explorer Performance”.
e. Click on “Advanced” and then click on “Run as Administrator”.
f. Click “Next” and follow the on-screen instructions to complete the troubleshooting process.
2. Run IE with no add-ons. Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
3. Reset Internet Explorer settings.
http://support.microsoft.com/kb/923737
Please understand that reset Internet Explorer to its default configuration. This step will also disable any add-ons, plug-ins, or toolbars that are installed.
4. Try to reinstall the IE 11 for a test.
How to reinstall or repair Internet Explorer in Windows 7, Windows Vista, and Windows XP
http://support.microsoft.com/kb/318378/en-us
If the issue still occurs, you may boot the computer in safe mode and check if that helps.
Advanced startup options (including safe mode):
http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!
Did you fix your issue? I am having the same one
-
When I first got my iphone i plugged it into my friends computer and added songs from their itunes. Now when i plug it into my computer it will not connect or show up in the sidebar in itunes. I have already tried factory resetting the phone and 'authorizing this computer' in itunes. Can anyone help?
Is your iTunes up to date, it is now 10.7, click the iTunes button at the top of this page if you need the new version.
-
First release of new DPL Assistant, an IDE plug-in
We are pleased to announce the first version of a new component. "DPL
Assistant" is an IDE plug-in that is intended to help developers use,
and learn to use, the Direct Persistence Layer of Oracle Berkeley DB
Java Edition. The DPL Assistant is initially provided as an Eclipse
plug-in.
This first version of the plug-in performs validation of DPL
annotations in Java source code. Each time you save changes from the
Java source code editor, the validator analyzes annotations (@Entity,
@Persistent, etc.) and reports any errors or warnings that it can
detect, in a similar way to how the IDE reports Java compilation
errors.
Of course there are many more things that the DPL Assistant could do.
We are requesting your feedback. Please see the Possible Future
Enhancements section at the end of this message and send us your
thoughts by replying to this forum thread.
Installation
You can install the DPL Assistant using the Eclipse update manager.
Start by adding our update site to your configuration:
http://download.oracle.com/berkeley-db/eclipse/The DPL Assistant was developed on Eclipse version 3.3, and has been
tested with both 3.3 and 3.4. It of course requires at least Java 1.5
(since it works with Java annotations).
Usage
Once installed, the DPL Assistant may be enabled on a per-Java-project
basis. From the Project Explorer, right-click on the name of a Java
project, and choose Properties from the pop-up menu. In the
Properties dialog, choose the "DPL Assistant" page, and turn on the
"Use DPL Assistant" check-box.
Now you can create a Java source file and type in some Java code,
using DPL annotations. Whenever you save your changes in the Java
source code editor, the validation tool checks the code, and adds
error/warning markers for any problems that it finds.
If you have your Eclipse workspace set up to build automatically, you
only need to save your changes. (See the Project -> Build
Automatically menu item.) Otherwise you need to do an explicit Build
to run the validator.
When the tool reports a problem, you should be able to see a marker in
the margin on the left-hand side of the editor, and if you show the
Eclipse "Problems" view you should see it there too. Also, a few --
but not all -- of the problem types also appear as squiggly underlines
in the source code.
As a simple example, if you were to type in (and Save) the following
code:
@Entity public class A {
String foo;
}you should see an error marker, complaining that "Entity class lacks a
primary key".
Known Issues
There is one significant known issue: if you have multiple Java
projects in your Eclipse workspace, with entity or persistent classes
from one project referring to classes in another project, then
sometimes DPL Assistant can get confused. In such a case, it may fail
to notice changes in one project that ought to cause a refresh of the
validation for classes in another project, resulting in the retention
of stale results from a previous validation.
If this happens, a simple workaround is to manually request a clean
build of the Java project (from the menu bar: Project -> Clean ...).
Possible Future Enhancements
At this point these are only some ideas, and do not represent any sort
of commitment or definite plan. We would especially like to get
opinions and feedback from the community. What features do you think
would be useful?
* the DPL Assistant is initially provided as an Eclipse plug-in, but
we could add support for other IDE's, such as NetBeans or
JDeveloper. Again, this depends on the level of interest from the
community. Please let us know what would be useful to you.
* instead of merely complaining about errors, in many cases it could
fix the code automatically. Sometimes there are several possible
fixes, depending on the developer's intent. These could be
presented to the user in a multiple-choice pop-up menu.
* "content assist": instead of waiting until an error has been made,
it is sometimes possible to help the user get it right the first
time. In the same way that the IDE helps in writing Java
expressions (e.g., presenting a multiple-choice list of known
methods, given an object reference of a known class), it could
present a list of valid completions during typing of annotations.
* wizards: instead of having to type entity classes by hand, a wizard
could lead you through the process of defining the desired fields,
and then generate the basic Java source code automatically.
By analyzing an application's overall schema, a wizard might also
help generate code for a test harness. Or, by comparing the current
schema to a previous schema extracted from an old database
environment, it might help generate conversion code ("mutations").
* ultimately, it would be sweet to be able to render an abstract
graphical "picture" (like a UML diagram) from an existing schema,
and even (conversely) to support interactive drawing of such a
diagram from which entity and persistent classes could then be
generated automatically.
Alan Bram
OracleThanks for your account and experience with the new iWeb.
Nice site now, although vegetarians better skip it
I personally got rather hungry viewing it. And it is only 13.30 here. -
Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1) Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2) Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3) Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selectedYou need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.
-
I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?
Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh -
Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)
Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com
Maybe you are looking for
-
Using the scott schema, in my test workspace I created a BC4J project that had 4 tables/view objects using the wizards and taking all the defaults. I created a UIX-JSP project using those view objects. Next I created a new table in the database (Logi
-
How to handle make current for programmatic VO
I have a view object that populates row-sets based on a procedure. The procedure returns an oracle object list, which I am able to convert to the View Object's row. The executeQueryForCollection() runs my procedure stores my data using protected
-
How do I preview my video in Motion?
I'd like to see it without all the distractions
-
I have a lot of problems with ads in chat software, but this one's new. You have recently started serving a new ad for the Hungarian Vodafone, made in Flash. Sadly after a few loops it will use up a lot of CPU and render Skype itself (in particular!
-
Text merging together when scrolling
When a single screen text starts merging and getting garbled when scrolling though code, if we expand to 2nd screen issue stops. Updated video drivers but did not resolve issue, this is happening on a Windows 7 64 bit VDI using Citrix Receiver 3.4