Accordion widgets no longer working after most-recent update...

All of the accordions on my website were functioning until I recently updated my Adobe Muse CC and re-uploaded the files to the FTP.  All of the tabs used to be closed by default, then when clicked they would expand and all the other tabs below the expanded would automatically move down and up as the tabs open/close.  Now it seems like when you open a tab it overlays the other headings and the open tab's heading disappears?
You can see an example here:
http://andinafamilyoffices.com/investment-advisory-and-wealth-management.html

I have exactly the same problem, on a Sony 36". With overscan on, I can't see the menu bar at the top of the screen, and lose a lot of the dock. By turning overscan off, and fiddling the display settings on the TV (altering area to -2) I can get it so it uses up more (tho still not all) of the screen, with all the bars etc.
I could live with this, however it also seems to have screwed up the res. No matter what setting I use the fonts look fuzzy and hard to read. The tv screen was never quite as crisp as the monitor on our iMac, but I could read an e-mail without feeling nauseous.
Hoping Apple will fix this....

Similar Messages

  • Display changed/overscan not working after most recent update

    I'm running my mini through an LG 42" plasma TV using a store-bought HDMI to DVI cable, and I had the resolution at 1344x756.
    After I did the most recent update for what I assume was Leopard 10.5.7, my resolution and colour quality changed. Now with overscan on the picture is cropped and the dock is almost out of view when I hover over it, and with overscan off there is a black gap of about an inch framed around my screen. The only change ocurred after I reset the computer post-update. I tried re-installing the update and messing around with the cable connection to no avail.
    What are the odds that it was the cable? Is there anything you know of to roll back updates? Has this happened to anyone?

    I have exactly the same problem, on a Sony 36". With overscan on, I can't see the menu bar at the top of the screen, and lose a lot of the dock. By turning overscan off, and fiddling the display settings on the TV (altering area to -2) I can get it so it uses up more (tho still not all) of the screen, with all the bars etc.
    I could live with this, however it also seems to have screwed up the res. No matter what setting I use the fonts look fuzzy and hard to read. The tv screen was never quite as crisp as the monitor on our iMac, but I could read an e-mail without feeling nauseous.
    Hoping Apple will fix this....

  • An iTunes key command I created no longer works after the recent update

    I created a key command years ago for joining tracks. (Command-J) When the iTunes 11 update happened, it stopped working. I know it is the same key command for View options but it always worked before. So even if I make it a new command, it still won't work.
    Anyone else have a similar problem?
    Thanks

    You shouldn't clear cookies on shut down, but let them expire instead.
    Details like websites remembering you (log you in automatically) are stored in a cookie.
    *Create a cookie 'allow' exception to keep such cookies, especially in case of secure websites and when cookies expire when Firefox is closed.
    *Firefox > Preferences > Privacy > "Use custom settings for history" > Cookies: Exceptions
    In case you use "Clear history when Firefox closes" or otherwise clear history:
    *do not clear the Cookies
    *do not clear the Site Preferences
    *https://support.mozilla.org/kb/remove-recent-browsing-search-and-download-history
    Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
    Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep.

  • HT6114 My double clicks no longer work after doing this update.  What happened?

    Double clicks in iPhoto no longer work after doing the update.  Trying to troubleshoot, but feeling dense in that I can't get this thing to work.  Any suggestions, please?

    Try this thread >   https://discussions.apple.com/message/23317566#23317566

  • Problems running java after most recent update

    After updating to the latest version of Java via Software Update a few weeks ago, I am unable to run the Java applet I need to run to log onto my scheduling system for my work. We use ClinixMIS software which is web based and appears to load a Java applet when I log in. Before the most recent update I had no problem logging in and I still have no problems logging in on older machines running snow leopord and earlier versions of MacOSX with previous versions of Java. When I called Apple and told them my problem the tech said it was because the version of Java is more advaced than the one Clinix is using. I asked how to go back to an earlier version and I was told I can't do it. When I tried to download and install an earlier version of Java the computer wouldn't let me do it. I am running the latest version of Lion on a 2010 MacBook Pro with a i5 processor. I tried Safari, Chrome and Firefox and nothing worked. Does anyone have any ideas or has anyone run into a similar problem? Clinix has not supported Macs in the past but when I talked to the guy they sent out to help with some other issues we are having he told me they had a "team working on it". That has been their response now for about four weeks.

    Get your IT people to talk to the ClinixMIS software developer and bring it to 2012 standards.

  • After most recent update, Firefox keep hanging intermittently with "Not Responding".

    After the most recent update, my Firefox browser begins to hang intermittently with "Not Responding". I have checked the extensions and plug-in like Java, all of them are the latest updated ones. Everytime I open a new site or click on links to load another page, it happens. Every single time.

    '''is there a solution ''(temporary OR permanent)'' for this problem yet?'''
    i tried '''EVERY possible alternative'''; even when opened in ''''''safe mode'''''' or when installed for the first time w| '''NO addons or ANYthing else''' but the '''original default settings''', still does the same thing.
    mozilla people?? really?? no answer|feedback|suggestions, anything at all from u guys??
    if it isnt a version (browser, OS, addons, etc) issue, what is it that separates us from the users not having the problem?
    this is is very frustrating; h|e it's even more frustrating when there is no response from tech support. is it because there havent been enough people who have reported this same issue so there can be some interest & find a fix; OR is it that u dont know; OR that there is not & will not be any fix?
    we cant continue being users if we cannot use it. it's really my favorite browser, but if it doesn't work & u guys dont have a fix for it, then users w| this same problem wont have any other option but to switch to a different browser permanently.
    really mozilla??? nothing? a reply would be very nice...

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • Apogee Jam No longer working after 1.1 update?

    My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
    Specifically what happens is:
    1. I open the garageband app
    2. I select the guitar amp
    3. I plug the Jam chord into Ipad (guitar is already connected to cord)
    4. Jam light goes green, blue, bright green then green
    When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
    I've tried plugging my guitar in first, then starting garageband, no difference in results.
    I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
    Outside the garageband app, the ipad does recognize the Jam in settings, general.
    What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
    Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

    Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
    Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
    Message was edited by: Rickd3333
    Message was edited by: Rickd3333

  • Adobe Premiere freezing after most recent update

    Hey all,
    I posted in here a while back because I was working with MTS files and seemed to be having an issue out of the blue with my projects freezing, where the video would play, but the cursor and anything I would click or move would not respond.
    I ended up transcoding to Prores and finished the edit. 
    BUT!!!  Even in the prores version this happened again, and I finally tied it to the universal counting leader.  Now I've used this thing many times before with no problems.  But since the most recent update (I'm now running CC v8.1.0) this keeps happening!  If I have the leader in the projects window and the timeline (or just the projects window) it's starts to freeze and behave like this.
    I'm not sure if it's only isolated to the universal counting leader, but if I delete it from my project, save and reopen, everything runs smoothly!
    Anybody have this issue or know why this is happening since the update?
    Thanks.

    Hey all,
    I posted in here a while back because I was working with MTS files and seemed to be having an issue out of the blue with my projects freezing, where the video would play, but the cursor and anything I would click or move would not respond.
    I ended up transcoding to Prores and finished the edit. 
    BUT!!!  Even in the prores version this happened again, and I finally tied it to the universal counting leader.  Now I've used this thing many times before with no problems.  But since the most recent update (I'm now running CC v8.1.0) this keeps happening!  If I have the leader in the projects window and the timeline (or just the projects window) it's starts to freeze and behave like this.
    I'm not sure if it's only isolated to the universal counting leader, but if I delete it from my project, save and reopen, everything runs smoothly!
    Anybody have this issue or know why this is happening since the update?
    Thanks.

  • Firefox crash on startup after most recent update?

    Once Firefox installed the most recent update, it will no longer open. It attempts to open, but immediately crashes and the crash report opens. I have tried to uninstall (deleting profile as well) and reinstall, but it continues to crash. This is the most recent version of Firefox, 8.0 I think. Pleeeease help, I hate IE.

    No. None of those are the issues. I had already gone through a lot of the help stuff before I posted this.
    And as I explained earlier, there is no crash ID listed that I can see.

  • [SOLVED] Sage-mathematics (Notebook) won't work after a recent update

    Hello!
    I've got troubles runnig sagemath's notebook server. After a recent update it goes like this:
    $ sage -n
    ┌────────────────────────────────────────────────────────────────────┐
    │ Sage Version 6.1.1, Release Date: 2014-02-04 │
    │ Type "notebook()" for the browser-based notebook interface. │
    │ Type "help()" for help. │
    └────────────────────────────────────────────────────────────────────┘
    Please wait while the Sage Notebook server starts...
    sh: symbol lookup error: sh: undefined symbol: rl_signal_event_hook
    sh: symbol lookup error: sh: undefined symbol: rl_signal_event_hook
    sh: symbol lookup error: sh: undefined symbol: rl_signal_event_hook
    sh: symbol lookup error: sh: undefined symbol: rl_signal_event_hook
    sh: symbol lookup error: sh: undefined symbol: rl_signal_event_hook
    The notebook files are stored in: sage_notebook.sagenb
    ┌────────────────────────────────────────────────┐
    │ │
    │ Open your web browser to http://localhost:8080 │
    │ │
    └────────────────────────────────────────────────┘
    Executing twistd --pidfile="sage_notebook.sagenb/sagenb.pid" -ny "sage_notebook.sagenb/twistedconf.tac"
    sh: symbol lookup error: sh: undefined symbol: rl_signal_event_hook
    And the notebook server won't start. Searching for the solution yields Notebook won't start with bash 4.3 (unanswered question from 2 Mar) and Minimise security risks with an application that needs root? (same error message, but the main idea is about some third-party untasted software).
    Since sage-mathematics is in official repository and there is wiki page I figured out I would ask here, because still no solution found except for downgrading bash or going with virtualization.
    Last edited by Ajunta (2014-03-20 04:40:57)

    https://bugs.archlinux.org/task/39533

  • Some playlists will no longer sync to iTouch after most recent update

    I am struggling to get 3 playlists back onto my iTouch after a recent iTunes and iTouch software update. When I look into the playlist of choice on iTouch after syncing, it says no music available can download from iTunes.
    I don't understand why my playlists aren't syncing anymore.
    Anyone else have trouble with this? How do I fix?

    Does this thread help?
    http://discussions.apple.com/thread.jspa?threadID=2327696

  • My kindle and google apps on my iPad are not working after most recent software update

    After latest software update on my iPad mini I cannot get the Kindle, google or Netflix apps to work? 

    have you gone to the app store program to check if there are updates for those apps to work with newer versions of ios ?

  • My iPhone 4S isn't recognized by iTunes after most recent update to iTunes.

    So after updating to the most recent version of iTunes, my iPhone 4s will not sync with iTunes.  Before the update, no problem whatsoever.  It is recognized by my IOS (Windows 7) and I can see it on my control panel but how do I get it to sync?
    Thanks!

    The new iTunes *****! It wasnt able to backup my data too and after restoring I had to Restore with my a month old Backup(Contacts were intact in that). For your problem, Goto Edit>Preferences>Devices, click "Reset Sync Data", Close iTunes and reopen. This might work and if this doesn't than Restart Your PC and Hard reset your iPhone by Pressing Home and Sleep button together(This will just restart your iPhone and won't restore anything) than Sync, else a new update or magic will help you out(if you don't plan to restore your iPhone.

  • After most recent update (3.6.10) cannot connect to internet via any browser or application (Windows Vista)

    I recently updated Firefox to 3.6.10 on a Windows Vista machine and have been unable to connect to the internet with any application since. Any help you can provide would be graciously appreciated.
    Upon receiving the "Firefox has updated and needs to restart" message, I continued to browse the internet for a period of time. When I finished what I was doing, I restarted the browser. When it came back up, it failed to connect to the internet. Signal strength from wireless network is "Very Good" and indicates that I am connected to the internet. I have tried the following with no success:
    - Attempted to connect to internet with Internet Explorer
    - Restarted the machine
    - Disabled Windows firewall
    - Checked that Internet Options settings had not changed
    - Connected to different wireless networks
    After each of the above, I tried to connect with IE and Firefox.
    As an amateur it seems that this isn't a Firefox problem, but I have to assume since the connection was good immediately before restarting the program and the completely inoperative after restarting, that it has something to do with the installation. Thank you very much for your time.
    Reed

    PROBLEM SOLVED:
    In Internet Options under Connections > Settings, "Use system settings" was selected. Changing the selection to "Automatically detect proxy settings for this network" in connection settings allowed all applications to connect to the internet.
    Why "System settings" continues to work on my XP system after the update and why it worked on the Vista system before the update but not after the update is a mystery... but as long as it works, who cares

Maybe you are looking for