Account 233000 needs assignment to CO Object

Hi
Im trying to post differences in Physical Inventory and this error appears. What are the possible reasons and how do I fix.
Vishnu

Hi
For G/L account 233000 you will have to maintain these details in FS00 in Edit cost element tab.
Regards,
Sourabh

Similar Messages

  • Account 891000 needs assignment to CO Object

    While doing GR for subcontracting goods, I encountered an error saying Acc 891000 does not exist in CC 1000, when i created one using FS00, the error comes as ' it needs assignment to a CO object'.... Hw do i go with this....

    Hello
    Go to customizing task OKB9
    Copy an entry and use your 891000 account.
    Regards
    Kedar Kulkarni

  • Account needs assignment to CO object

    Hi
    I am faced with a message 'Account XXXX needs assignment to a CO object'
    hw do i go abt accomplishing this ?
    reward pts for help
    siddharth sridhar

    Dear Sridhar,
    This error has surfaced because somebody has created Primary Cost Element (KA01) for the G/L account , that is maintained in VKOA (Revenue account determination) or OBYC( Configure Automatic postings).
    Now nothing can be done with that G/L account.
    Take help of FI consultant and create new G/L account (FS01) ( or use existing unused G/L account that meets your requirement). Assign this G/L acct to the revenue account or invenotry account (as the case may be) in VKOA or OBYC.
    Hope this solves your issue.

  • MIGO Error - Account 6500029 requires assignment with CO object

    Hi Experts,
    I am facing problem with new material code opened recently.  Valuation class assigned is ZSTD. 
    At the time of GRN, It is  giving an error msg :
    Message no. KI235.  Account 6500029 requires assignment with CO object. 
    Kindly note I am not making an account assignment P.O.  It is a normal P.O.
    Previously also with same valuation class, we have received no. of materials with out any error.
    It should post the material to my inventory account 1220000 as it did with materials of the same valuation class earlier.  I don't know from where it is picking GL 6500029.
    Kindly help.
    Regards,
    Rajneesh Gulati

    Hi ,
    In OBYC kindly check the Key BSX for the GL account assingment to the valuation class .
    As inventory accounts are Balance sheet accounts and do no require an assingnment to a cost element .
    If your account is getting changed then check the same in OBYC - BRX .
    Regards ,
    Dewang T

  • MR11 clearing - GL accounts requires an assignment to co object

    Hi Experts,
    While executing MR11 clearing, system is throwing error account xxxxxxxx requiring an assignment to CO object. We have done GR as well IR for which cost object is correctly picked as in purchase order. But while doing MR11 it is throwing error. What configuration needs to be checked to over come this error.
    Thanks in advance
    Narayanan

    Hi,
    Go to FS00 choose  your That g/l account click on change mode and click on Edit cost element (F8) and click on Default Acct Assgnmt Tab give me a cost center and save
    Thanks,
    Raviteja

  • GL account requires assignment to CO object

    Dear All,
    While preparing excise Invoice the accounting document is not getting released. On going to T-code VFX3 and tyring to releasing the document message comes as "Account 00000 requires assignment to CO object".
    Kindly guide on this issue .
    Thanks in advance.

    Hi
    I think it comes form the Account assignment tab in Item / header level of sales order where we mantain the Business Area.
    just check the settings (Path -
    ENTERPRISES STRUCTURE>ASSIGNMENT>SALES AND DISTRIBUTION>BUSINESS AREA ACCOUNT ASSIGNMENT

  • Error KI 235 ACCOUNT REQUIRES AN ASSINGMENT TO CO OBJECT

    Dear Sir/Madam,
    we had cenvat clearing account. With reference to purchase order, we want to clear them through f.13. when we run in test
    run, we found that some items are not getting clear due to minor difference in debit and credit.
    we had set tolerance limit for cenvat clearing account to clear minor difference in automatic posting through f.13.  we had set  excess prov/short prov gl code set in fbkp to post difference arising at the time of gl account clearing. we also set G/L code/cost center combination in okb9.
    Now if we had maintained the gl code/cost center in okb9 on company code level, system post the difference properly in cost center. But if we maintain gl code/valuation area/cost center in okb9, system give error account requries an assignment to co object. system doesnot get cost center while posting. we had 7 valuation area and we want to define cost center on basis of valuation area in okb9 to post the difference in cenvat clearing.
    Can you advice how to rectify the error? 
    Regards
    Rajesh

    Hi,
       The account assignment for for automatically generated items such as the price difference will not pick up the assignment at a detailed level (eg. based on the valuation level or the business area). You must maintain OKB9 at the highest level for this account, on the first screen of OKB9.
    Note 32654, explains why the system takes the account assignment at a higher level for automatically generated lines
    like small differences.  You should maintain an entry in OKB9 at a higher level than valuation level (or profit center, or business area).
    regards
    Waman

  • Error  - Account requires an assignment to a CO object

    We have created a Debit note for scrap material sale where we are charging "Cheque Dishonour Chg" to the customer.
    The GL code attached to Cheque Dishonour Chg is a cost element with cost element category 1 - Cost / Cost Reducing Revenue.
    Hence when we are releasing the billing doc for above debit memo sales order, the system is asking for assignment to cost object.
    Field status group attached to above GL code is G004 - Expense accounts is having - 'Profitability Segment' suppressed.
    Can any one please guide as to which cost object can be put here?
    Regards
    Ratna

    I am looking at this area from a different perspective.  However, what I believe you want is either a sale trx with or without a COPA document.  If you want it with a COPA document, then you need a profitability segment (PSG) posting.  You can have the OKB9 transaction derive the PSG posting by checking the associated box there.  If you still have an error, look at FSG or the auto-post check box in FS00 transaction for the particular account. 
    However, if you want this account to be more of top side entry and not part of COPA, this is a more unique approach.  On my system I have one or two accounts that seem to allow me to post manual journal entries (FB50) within the cost section without any CO Object of any kind.  This seems like an impossible situation from what I understood about CO.  We have an account and a primary cost element with category 1.  This account is not auto-post only and is listed within the OKB9 transaction.  Additionally, the field status group (FSG) shows everything as either optional (like CO Objects) or suppressed.  This was the only way we found possible to post PO receipts into production orders for Make-To-Stock.  I am not saying we are doing it the right way, but a way that seems to work.

  • Account 700402(depreciation account)  requires an assignment to a CO object

    hi gurus,
    i am facing with this problem of depreciation which asks for a Co  object, the thing is its a depreciation (expense account) and it has been assigned to the Asset class and has been updated in the cost element. is there some place i need a assigne a  CO object .  infact i have also checked the field status group but all of the (Additional account assignments) in this group have been suppressed. help me.
    regards
    sayeed

    Hi,
    Go to FS00. Enter Acc. number and click u201CEdit Cost Elementu201D and again click on u201CDefault Acct Assignmentu201D There maintain Cost Center required for that G/L Account.
    Regards,
    Abhee.

  • Gl account require assignment to Co object

    Hi
    while  doing PGI .it is giving error of  "account require assignment to CO object"
    please clear where to assign Co object & how.
    do i need to assign the Gl in okb9 seeting

    hi,
    First identify GL account which you have assigned in OBYC . then go to FS00 and enter your account no. and press on Edit Cost Element in that there is 3rd tab page Default account assignment there give cost center and save it.
    Now try once again.
    thx.
    Ganu

  • FM account assignments need to be assigned for each grantee year

    Hi experts!!
    I have a problem when i execute GM_REVAL (Revaluation of Currency for Grants Management). System gets an errror: FM account assignments need to be assigned for each grantee year (Message no. GRANTMGMT363).
    I've customized FMDERIVE in order to derive Fund center, commitment item, grant and fund. And GMDERIVE to derive Sponsor Program and Sponsor class. In a FI postings (FB01 or FBCJ), these derivations works ok.
    Anyone knows how can i solve this error?
    Thank you.

    Hello Dolors,
    for the revaluation you need to maintain default FM settings in the
    customizing. See IMG - GM - master data - revaluation. Note that these
    FM master data objects must be valid throughout the budget validity
    period.
    I hope this helps..
    Best regards,
    Mar.

  • Account requries an assignment to a  co-object

    Dear
    When posting a material through txn MB1B with movt type 453 it shows an error
    Account requries an assignment to a  co-object
    Tell me where we assign the co object
    Regards
    sanjay

    There is no account assigbment for this material type hence you are getting this error.
    You need to take help from MM for this error.
    i suggest you to open query in MM forum.
    Regards
    TAJUDDIN

  • F110 AutoPayment KI 248 Account Requires an assignment to a CO object

    Hi Guru,
    I have found a problem that when run F110 proposal, several accounts shows the following error message in job log. I have searched other webpage on the same problem but it doesn't work.
    Tried solution: OKB9 assign cost center to the account. KA02 assgin default cost center to the account. But all the above can't solve the problem.
    The error message is:
    Account 658215 requires an assignment to a CO object  KI 248
    I found the account 658215 was for revaluation gain/loss. But it is confusing that the open item for vendors are all posted in local currency. No foreign currency is used in auto payment also.
    I tested the same vendor in QA system but it gave me no errors. Only in PRD it has the error message on proposal.
    Could you please help to throw some light on the problem?
    Emma

    Hi,
    Kindly check the cost element 658215 (i.e) what cost element category assigned, since you said in QA it has been successfully posted, you can compare the same.
    Also, try to simulate the document in PRD through FB01 for the GL account 658215 and assign the cost center manually and check whether the same error is appearing. If not, then your assinment in OKB9 is wrong or the cost center is deactivate or block.
    Let me know if the issue is solved.
    Thanks and Regards
    Gopinath

  • KI 235 Account requires an assignment to a Co object during GR/IR clearing

    Hi All,
    I have an above issue during GR/IR clearing.  The scenario is below
    We have maintained three currencies
    AED-Company code currency
    USD-1st parallel currency
    INR-2nd parallel currency
    At the time of GR/IR clearing, it is giving the above error for the Exchange Gain / Loss GL account maintained.  There is no difference in the company code currency, but the difference of 0.01 is appearing in the USD amount which is posted to Exc Gain/Loss account.  But at the time of doing the automatic clearing account vide transactin code f.13 it is giving the above error.  We have already done the setting in OKB9 and have assigned the cost centre to the respective GL account as per different profit centre.
    Kindly inform if anybody has come accros this issue and how it was resolved.
    Thanks
    Mahesh

    Hi Raheem,
    I am running transaction code f.13 GR/IR clearing account.  We have maintianed 3 three currencies. 1st AED-co code currency, 2nd usd- parallel currency, 3rd INR- parallel currency.  At the time of clearing system is giving above error of account requires an assignment to a co object for GL account of Exchange Gain/Loss account.  The exchange rate difference is coming for the 2nd currency ie USD.  In the leading ledger there is no problem.  We have done the setting in OKB9 and assigned the co object for Gl account of Exchange gain and loss.  Hope you have understood the issue.  Is there any solution apart from the setting in OKB9.
    Mahesh

  • Error while adding landed cost G/L account 5207010003      needs DR assignment for dimension 1;  fill in DR-related fields

    Error while adding landed cost G/L account 5207010003      needs DR assignment for dimension 1;  fill in DR-related fields

    Hi Rajesh
    Go to System Initilization =>  General Settings => Cost Accounting => Check the Dimension1 has Block Posting.
    Relase the Block and add the Document it will add.
    With Regards
    Balaji

Maybe you are looking for