Account Assignment Error When Posting GI Against Sales Order

Hello SAP Experts,
We are currently experiencing a problem during goods issueance against sales order (VL02N). The system terminates the issueance and gives error:
"Account XXXXXX requires an assignment to a CO object".
We have tried maintaining the GL account in OKB9 and assign a default profit center there but i didn't work. The material master also contains the profit center. We were only able to post the transaction if we try to default the a cost center in FS00. However we dont want to assign a default cost center as cost centers differ by plant. We are wondering why it asks the cost center considering that it already contains the sales order assignment. We checked the field selection of the GL account, movement type and even the posting key and all showed that the cost center is not required. We are now in a dead end situation here. Please please help us.
Thanks in advance!

Hello Praveen,
Thank you for your immediate response.
What confuses me is the fact that it asks for a CO element when in fact it is already assigned to one (it is goods issuance against sales order). Do you know why is the system behaving that way?
Thanks!.

Similar Messages

  • Error when creating PO for sales order (third party)

    Hi All,
    I have been trying to create a new PO from a purchase requisition. This PR is a third party PR with Account assignment category S. Also it is sales order related.
    When I try to save the PO it gives me two errors as shown below :
    "No upate of sales order 30081586 from purchase order (error V4 115)"
    "System error (error in method PO_POST)"
    Has anyone come across such an error? Is this because of something wrong in sales order?
    Regards,
    V S

    Hi ,
    Check note 849480 .
    according to this note the cause is
    "You create a purchase order with reference to a purchase requisition (PReq) that was generated as a result of a third-party order or an individual customer order. If another purchase order with reference to this sales document is changed at the same time (in another window or by another user) and the first purchase order is saved in the meantime, the associated sales order item is not updated and a termination occurs with error message ME 816, "System error: (error in method po_post)".
    This is basically a program error .To solve this follow the correction instructions mentioned in note 849480.
    Regards,
    Anupam

  • Account Determination Error When Posting Goods Issue Against Sales Order

    Hello SAP Experts,
    We are currently experiencing a problem during goods issueance against sales order (VL02N). The system terminates the issueance and gives error:
    "Account XXXXXX requires an assignment to a CO object".
    We have tried maintaining the GL account in OKB9 and assign a default profit center there but i didn't work. The material master also contains the profit center. We were only able to post the transaction if we try to default the a cost center in FS00. However we dont want to assign a default cost center as cost centers differ by plant. We are wondering why it asks the cost center considering that it already contains the sales order assignment. We checked the field selection of the GL account, movement type and even the posting key and all showed that the cost center is not required. We are now in a dead end situation here. Please please help us.
    Thanks in advance!

    Dear,
    Message no. KI235?
    GO TO T-CODE FS00 AND EDIT COST ELEMENT AND THEN YOU ASSIGN COST CENTER
    Please check this link,
    [Account Determination |"Account 'xxxxxx' requires an assignment to a CO object"]
    Regards,
    R.Brahmankar

  • Error when i reject the sales order

    Hi:
    I´m in Upgrade to 6.0, and when I reject a sales order in SD, the system show me this message "Subsequent function 'Production order/plan order from sales document' not possible: Item 000010 was rejected Message no. V1579".
    In the implementation the products was delivered for the company, but today they work with service orders but the integration SD with PP is until running but they user the order for documentation and to saw the costs.
    I wrote a SAP message and read this notes 964813 and Note 1028464 but both are already aplicated. SAP responce to me but I don´t konw to much of the SD and PP integration. Please, can any one help me?
    SAP responce:
    Info to SAP    
    12.03.2008 - 12:49:44 CET - Reply by SAP     Attachments
    SAP Note 97272  - Rejections of individual order items possible
    SAP Note 356895  - Rejection of third-party items and individual PO items
    SAP Note 549972  - FAQ: rejecting third-party or individual PO items
    SAP Note 1054121  - The SAP Ecosystem in a Nutshell
    Dear Gina,
    I was analyzing the problme in your system.
    If I understand you rigt you are expecting that the link between the
    sales order and the production order is not deleted when you set the
    reason for rejection. When you set the reason for rejection again then anew production order is created.
    The standard behaviour is that the link between sales order and
    production/assembly/service order is deleted. As field vbep-aufnr is
    deleted also no later restructuring is possible.
    In the header table of the order aufk-kdauf there is still the relation
    to the sales order number but there is a deletion flag set for it and
    the link can't be reactivated.
    I am sorry that I could not give you a more positive reply.

    Hi:
    In the table AFKO I don´t have any order document. I searched this, before reject the sales order, and then, when I try to reject the sales order, and in both cases I don´t have the relation about the order and the sales order in this table.
    I looked at the table AUFK and in the field KDAUF I saw the sales order and the relation with the PM order, and this is my problem, I don´t no why the message error tell me something  about PP order,  I didn´t understand.
    I saw the customizing and I Know they works with the "Strategy group" in materials and it was customizing in "Demand Management" and the order was customizing in "Plant Maintenance and Customer Service", (PM) customizing the Order Types. I think when finally they decided that the material was only for services, they changed something, and the customizing is not complete in PP.
    In the old version 4.6C the rejection of sales order works, but in this version 6.0 and with MRP implementacion I don´t know in what step this was change. If you Know where can i find if something of MRP affect the previous integration please let me know, because I think is a PP customizing problem.
    Thanks
    Best Regards
    Gina

  • Invalid Account Code error when posting AP Credit Note

    Dear Experts,
    I hit this error message when posting an AP Credit Note based entirely on an existing AP Invoice (nothing was changed in the credit note).
    Invalid Account Code [Message 173-9]
    I have found 2 notes, but I dont think they're relevant
    [Note 1311905|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001311905]
    [Note 1286288|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001286288]
    Please help!
    Warmest Regards,
    Chinho

    Dear All,
    I found the solution!
    In my AP Invoice, there was a Rounding amount, but when I copied over to AP Credit Note, the system unusually set the Rounding amount as $0.00 and copies the Rounding amount to the Discount field instead.
    **The "Invalid Account Code" error happened because I did not set GL account determination for discounts scenario.
    So what I did was I cleared the Discount field in the Credit Note, and enter the rounding figure into the Rounding field again. Then, the AP Credit Note was able to go in Successfully!
    Thanks guys.
    Warmest Regards,
    Chinho

  • While doing service  in service po we get account assignment error pls help

    while doing services in service po we get error account assignment error (se181) pls help to resolve

    Hi,
    a service line can be never saved WITHOUT the account assignment details (except acc. ***. category U in in the PO item).
    In case the table ESLL will have entry but the accounting tables eskl  has got no entry or has entries with deletion flag, it would be an inconsistent situation.    
    You can set on the screen SAPLMLSK 0200 the deletion flag (ESKL-LOEKZ) for your service account assignment, but without entering a new account assignment information the system would not allow you to leave this screen. When you set the deletion flag for service line in the account assignment detail screen, you must enter right afterwards a new account assignment information in order to leave the screen without the error message 06 408.
    Regards,
    Edit

  • Error when posting goods issue

    hi gurus,
    can anyone please help me with this error when posting goods issue to a free issue sales order " line item text is mandatory for vendor invoices".
    thanks in advance

    Dear Ysabella
    It seems the item texts is not maintained in the order which is made as mandatory.
    Go to sale order VA02, select that line item and click on "GotoItemTexts".  There maintain the relevant text and retry.
    thanks
    G. Lakshmipathi

  • Error when posting to profitabilty segments

    Dear All
    I get the following error when posting poriftabilty segment data in the accounting doument, if i try to enter the same characteristic value even to diffrent G/L Accounts.
    Data record already exists
    Message no. KE581
    Diagnosis
    This error should not occur.
    Procedure
    Contact your system administrator or SAP directly (component CO-PA-ACT).
    Has anyone come across this issue... ? Pls let me know how to resolve this?
    Thanks
    Gayani

    Hi,
    Please implement the latest version of the note 1321225 into your system in order to solve this problem!
    Afterwards please execute the function module RKE_GENERATE_INTERFACE_ACT in transaction SE37 for the operating concern you use - as described in note 1321225 under 'Solution'!
    Please enter function module RKE_GENERATE_INTERFACE_ACT in transaction SE37, press F8, enter your operating concern and press F8 again.
    Afterwards the described problem with error message KE581 should be solved.
    regards
    Waman

  • Error when posting a SOAP request

    Hi all,
    Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
    The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
    can any one of you tell me in place of XISOAPAdapter what should i place?
    Please help me to post the SOAP request to PI server.
    Thanks in advance ,
    Manohar.

    Hi ,
    copy the same URL  (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
    See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
    You should get response something like this '
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
    ModuleProcessorRemote not instantiated
    This  is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
    Ranjeet Singh.

  • Error when posting IDoc *** in system ERP100

    Hi Experts!
    Can you pls help me with a goods receipt issue?
    When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
    The same msg is getting displayed in RZ20.
    On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
    What can be the reason for this problem please?
    What is in general the way to analyse and solve this kind of issue?
    Thanks a lot !!
    imre

    Hi,
    First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of  BBP_DOCUMENT_TAB.
    Hope this helps.
    Regards,
    Kalyan

  • Posting labor confirmations against sales order and internal order

    Hi,
    We are looking for a functionality where in we want labor confirmations to be done against a sales order line item or to an internal order which is attached to the sales order line item. CS module is not in scope. So can anyone guide how can we have the functionality without CS module.
    Thanks

    Hello,
    Labour confirmation can be posted through IW41, if the order type is a PM order or service order. If you wan to post expenses against sales / internal order (FI) , get in touch with a
    Finace expert, he may be able to guide you  properly.
    Prase

  • Error when posting the goods receipt

    Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
    Error when posting the goods receipt
    Message no. CB345
    Diagnosis
    With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1).  However, an error occurred when the goods receipt was posted.
    Please do needful.
    Regards,
    PP

    Hi Daniel,
    This is the first time i am coming across an issue like this.
    neverthless from a logical front,
    1. Remove Cost center as a valid receiver in Settlement Profile.
    2. Your OKB9 setting are pretty much good. No need to worry about it.  Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
    3. Check the Settlement rule when you have created Production Order. It should have been MAT.
    4. I hope you are creating Production Order with Material (using CO01 and not CO07)
    5. Make sure in OPL8, the default rule in controlling tab is PP1.
    Once all these are fine, i do not see any reason why you will get your probelm.
    Please check and revert back to me if the problem still persists.
    Best Regards
    Surya

  • Reg.Purchase order against sale order( E )

    Dear Experts
    I configured PO against cost centre (K - Cost center and G/L A/c is created) and it is working.But I want to configure against sale order (E).what is the configuration required. Pls advise in details
    Thanks
    Rajakumar.K

    Dear Raja,
    Third-party order processing (for direct-to-customer delivery/drop shipment) is triggered when a sales order containing a third-party item is created.
    When this occurs, the system automatically generates a purchase requisition item of the category u201Cthird-partyu201D for each delivery schedule line of the sales order item.
    This requisition item is converted into a purchase order (PO) item. Depending on the confirmation control key, the quantities/dates in the sales order are confirmed when the PO is created or an order acknowledgment is maintained.
    If you create a third-party item without referencing a requisition generated from a sales order, this is not third-party order processing in the foregoing sense: a matching-up of the data between the SD sales order and the purchase order cannot be carried out in such cases!
    Sales Order
    In the standard system, the sales order item for the third-party process has the item category TAS (this is found automatically if the item category group BANS has been set in the material master, or it can be changed manually). In the standard system, the schedule line category CS is found for the item category TAS. It is specified in Customizing for the schedule line category CS that a purchase requisition (type NB) with the item category '5' (third-party) and account assignment category 'X' is generated.
    The number of the requisition that is generated can be displayed via the delivery schedule lines in procurement.
    If a PO is generated from this requisition, it can be seen in the document flow for the SD sales order (Environment  Document flow).
    Purchase Requisition
    The requisition is generated via the function module ME_REQUISITION_EXT. An important characteristic is that the field EBAN-ESTKZ (creation indicator) contains a 'V'. If a third-party requisition is created in dialog mode, this field does not contain the indicator u2018Vu2019 u2013 that is to say, this is not a third-party process in the sense defined. A source determination process is carried out at the time of creation. The purchase order units found during this process are adopted! The account assignment, containing the number, item, and schedule line of the sales order, cannot be changed in the requisition. The account assignment is the u2018pointeru2019 between the requisition and the SD order!! Since Release 4.6, the delivery address cannot be changed either. The address of the goods recipient (ship-to party) from the SD order is adopted as the delivery address (caution: this can be located both at header and item level in the SD order).
    There is a requisition item for each delivery schedule line in the sales order!
    Purchase Order
    Purchase order items generated from the above requisitions contain EKPO-STATU = 'V'. The delivery address comes directly from the sales order (see LMEPOF3T MEPO_ITEM_FILL_ADDR) and cannot be changed. Neither can the account assignment be changed; here too it is the 'pointeru2019 between the PO and the sales order. In the standard system, the account assignment category is 'X', with KZVBR = ' '. Since the account assignment is located at item level, you must not convert several third-party requisitions into a single PO item, otherwise the update of the sales order is liable to fail!
    An 'actual' goods receipt does not take place with regard to a third-party item. The 'WEPOS' indicator is not set for the item categories 'S', but can be set manually. The posting of a GR results merely in a value update here. The entry of a vendor invoice can be made dependent on the prior entry of a GR. In the third-party process, this only makes sense if you wish to prevent the customer from receiving an invoice before having received the goods. A goods receipt should be recorded when the vendor reports the outward delivery.
    At the time of saving, the document flow and confirmations are updated in the SD order. If problems should arise on the SD side due to changes (e.g. the customer has been blocked), an error message is issued here first!
    In the case of third-party items generated without reference to a 'third-party requisition', i.e. the item category u2018Su2019 is merely entered manually, there can be no update between SD order and purchase order. Here, for example, the delivery address is not read from the sales order u2013 it must be entered manually (mandatory field).
    Sanjeev

  • Reg.Purchase against sale order

    Dear Friends
    Anybody have idea regarding purchase material against sale order and that will be kept as stock.
    As and when it is used according to the requirement. The procurement should be posted to stock account in purchase order itself. how to do it. pls help me.
    Thanks
    Rajakumar.K

    Dear ,
    i thinck ur company using trading business
    based on sales order u can create PO with account assignment E Sales order , system will asl sales order number in account assignment data at item detail level.
    the process will be
    Pre-shipment Shipment Procedure :
    1) create a sales order
    2) create PO with account assignment E where system will ask for sales order number
    3)delivery with vl10n
    3) preshipment invoice-VF01
    POST-SHIPMENT Procedure:
    1) do the GR the stock will be invetorized for ur sales order
    2)invoice verification MIRO
    3)Final Delivery: vl02 u have to change the intial delivery
    4)Final (Post-Shipment) Invoice: VF01
    work with ur FI consultant for G/L accounts
    Regards
    venu gopal
    Edited by: venu kk on May 19, 2009 6:36 AM

  • Plant to plant subcontracting against sales order

    hi
         my scenario is like this
    two plants A and B under one company code, its repair scenario in this sales order come in plant b ,in this repairing we have 5 process out of which one process has to be carried out in plant 1,so  for that  we will do subcontracting against that sales order with plant b. so how to handle subcontracting with plant a against sales order.
    Edited by: AMIT RANE on Mar 4, 2009 7:55 AM

    Purpose: - Subcontracting is also possible in conjunction with sales order  The subcontracting orders are account-assigned to a slaes order . Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock the time of the goods receipt. The material manufactured is also posted to the SO
    The cost of subcontracting is then debited to the SO.
    Since the components are not transferred to the "stock of material provided to vendor", it is recommended that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the Project stocks.
    Features: -
    Withdrawal from Stock of Mat. Provided for Project: -
    For components that are managed in Project stock, you can define whether the components are to be withdrawn directly from each Project or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
    You can maintain this indicator in the following places:
    In the MRP view of the material master record (MRP 4)
    In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types)
    Configuring the explosion types has priority over the configuration in Inventory Management.
    If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from Project stock.
    Regarding Subcontracting Challan: -
    Go to OMJJ, select the field "movement type" and press enter
    Enter movement type "311" and double click on "Field selection (Enjoy)" under Dialog Structure on left side.
    here "New Entries" and add field "LIFNR" (Vendor- plant as vendor )
    Now in MIGO, at the time of transfer posting of components using movement type "311 E", specify the vendor code of the Subcontracting PO (i.e. Subcontractor)
    Now create Subcontracting Challan in J1IF01 for material document of 311 E movement type.
    Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0001", Movement Type "311 E" should be maintained.
    Then do GR against PO and refer the Subcontracting Challan here.
    And then do reconciliation in J1IFQ for the GR Document against Subcontracting Challan.
    Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0002", Movement Type "543 E" should be maintained.
    Follow the below mentioned process;
    Process Steps: -
    1. OX09 - Create Storage Location as "9999" for Subcontractor Location
    2. MB1B - Do Transfer Posting of material from RM Warehouse to this Storage Location via movement type "311 E" (Instead of doing 541)
    3. Now go to J1IF01 - here use material document of movement type "311 E" and create Subcontracting challan. (If required)
    Prerequisite: - In SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > Here for Movement Type Group "0001" (For issues), maintain movement type "311 E" also along with 541.
    Rest all; refer subcontracting challan during GR and then reconciliation and completion, etc... Will be same as usual.
    Note: - At the time of GR, consume components from storage location "9999" (for 543 movement type)
    regards
    KI

Maybe you are looking for