Account Assignment field in Sales Order (Internal Order)

Hi SD Guru's
In my sales order i have two items with two different item categories....for the 1st item in the account assignment field i can see internal order number field, in the 2nd item i cant see that internal order field. What do i do? Any customization settings?
Regards
Ravi

Hi Ravi,
it is due to profit centre accounting / costing is active, it is better to get it clearified from a FICO consultant
regards,
Santosh

Similar Messages

  • Bill accounting assignment - statistical revenue posting on internal order

    Hello,
    I'm wondering if it is possible that revenues from a billing document can be posted as statistic revenues on internal orders while the 'real' revenues are posted into COPA.
    We would like to see the revenues directly in COPA as we we write more than one bill to different customers for development projects which we are controlling at the moment with internal orders. When we settle the internal orders the revenues are always going to one revenue object with one customer (depending on the settlement rule in the internal order) which is wrong. Nevertheless we need to see the revenues in the internal order in order to control the p/l of it.
    Thanks a lot in advance.
    BR,
    hansi

    Hi
    Account 7816040 requires an assignment to a CO object
    This is the message that appear everytime that I try to post to accouting.
    I add:
    1. VKOA - Define KOFK for this account
    2. OKB9 - To define which Cost Center for this particular Account
    3. Ka0s- Cost Center for this cost element
    4. IO - Statistical Internal Order
    Any futher suggestion to avoid this error message?

  • Unable to change account assignment field in PO

    Hi Experts!
    We are using SRM 7.0 with extended classic scenario.
    We are facing an issue with account assignment category field in a PO.Here is our scenario.
    User created a PO with costcenter account assignment field and this PO transffered to backend system i.e R/3.
    When the user again tried to edit the PO in SRM and change the account assignment field from costcenter to Internal order that is not possible because the
    account assignment field is grayed out .Then the user has to create a new PO with Internal order as the old PO didn't allowed him to change.
    Can any one help me in this regard with  some OSS note or any other possible solution and what might be the reason for the same?
    Thanks in advance!
    Regards,
    Kalyani.

    Hello Kalyani,
    Just to understand, Is your PO has Good Receipt or Invoice receipt processed? If so then PO do not allow to change the account assignment as charges are booked already.
    If not i would recommend to check if your BBP_GETSTATUS_2 job is running with proper interval? Sometime old PO's do not get refresh status if BBP_GETSTATUS_2 variant is set based on SAP recommendation (i.e. 7 days or so). In that case please execute manually BBP_GETSTATUS_2 and validate.
    Thank you
    Ritesh

  • About account assignment group in Sales Order.

    Hi gurus,
    I am working in SD for the first time and I am facing below problem
    1. Material code was created  with account assignment group (MVKE-KTGRM)  as blank (Sales Org 2 view)
    2. Later this material was entered in Sales Order.
    3. Subsequently Sales Order BOM and Production Order were made against this material.
    4. We maintained account assignment group in material master after creation of Sales order but account assignment group was not updated in Sales Order.
    5. Now the field is gray out or non-editable is there any way by which we can maintain account assignment group in the sales order.
    6. As the field is non editable we are unable to do Invoice by VF01.
    Is there any way by which we can maintain account assignment group in Sales Order??
    Edited by: Deepak Kulkarni on Mar 6, 2012 2:09 PM

    Hi
    As you have mentioned that you have maintained the acct assignment grp in the material master after the order was created, it will not appear in the sales order item already created and it will only reflect in new orders and changes to existing orders for that material.
    Proposed solution:
    If it is order related billing that you are doing, then goto VA02 and delete and re-enter the item with same material and qty.
    The account assignment group will appear.
    If the item is delivery related and if the delivery has already been created but PGi not done, then delete the delivery and then delete the item in the sales order and re-enter the item as told above. If PGI also done, then reverse the PGI, delete the delivery and re-enter as suggestd in above scenarios.
    The account assignment group will appear in the billing document document tab in item level.
    Regards
    Madhu

  • Purchase order creation - Account assignment group C (Sales Order)

    Hello Gurus
      During the purchase order creation in Me21N, account assignment category C (sales order) is available. In which scenario we will use it. When I assign C system is asking for a GL account. Why system needs a GL account, and how the posting will be at the time of goods receipt. Thanks for your help in advance.

    Hi,
    Creation of Purchase Order with t.code: ME21N  with account assignment category C (sales order) is used for Time and Material Expenses with third party scenario and you need to enter sales order number and respective G/L account . In this scenario 1st a  sales order is created with a material( material created DIEN material type) & then purchase order created with respect to sales order.
    Here you provide service to your customer and this service you procure from your vendor, you just play middle role  for providing and getting service.Standard DIEN material type designed for Sales usage only, so you create sales order  for service material.Service master is used to get service from vendor with item category D with proper account assignment category as C
    Example:
    Material type DIEN is used for when you offer "SERVICE" to your customer.( The steps are (VA01,VF01,VF04,F-28), If u used HR module( you can used with sales order with t.codes are: CAT2,CATS_APPR_LITE,CAT7,PR05,PRRW,PRFI)
    Service Master records(AC01)ESM is used when you procure "SERVICE" from your vendor.( Steps are: ME21N with Item Cat. "D" with Acc. ***. Cat. "C", ML81N,MIRO & F-53).
    Regards,
    Biju K

  • Rejected Quotation number is coming in account assignment tab in sales orde

    Hi Friends,
    I have created one quotation 'X 'and after that I created one more quotation'Y' with the reference of original quotation'X 'and rejected the earlier created quotation 'X'.
    After that I created sales order'Z' with the reference of quotation 'Y' but while i go to account assignment tab at ' order field' at sales order item level than the cancelled quotation no. is there coming.
    As per my knowledge quotation  no. 'Y' should flow in sales order account assignment tab in 'order field'
    My question is why rejected quotation no. is flowing there in account assignment tab in sales oreder ??
    And what is the use and impact of sales order field under account assignment tab at item level in sales order??
    This is scenario of MTO and we are using billing plan at sales document header level.
    Regards
    SV
    Edited by: sv.sap09 on Dec 6, 2010 1:22 PM
    Edited by: sv.sap09 on Dec 7, 2010 7:31 AM

    FYI-
    "Order field" at item level in sales order - account assignment tab refers Internal Order number ( created by using Tx:KO01), this is not SD orders.
              You might have same number range for Internal Orders & quotations. Hence confusing with the number.
    Quotation number will be available only in document flow & document status table VBUK. will not be displayed in order transaction.
    Regards,
    Reazuddin MD

  • Customer no to populate the Assignment field for Sales A/c using sort key

    Dear All,
    In 6.0, I am trying to get the Customer number to populate the Assignment field for Sales Account
    We have set the sales account to a 031 sort key - sort by customer, in FS00. When 031 is set, SAP goes to the BSEG table and looks at the KUNNR (customer) field and populates the Assignment field with what is in the KUNNR field of BSEG.
    The problem is: the customer number (KUNNR) does not contain any data in BSEG.
    The KUNNR field of all the other account lines for the document number are blank.
    Is it possible to bring the field in the General Ledger display?
    Does anyone know of a user exit or other solution?
    Thanks,
    Gov

    Hi,
    Check with SD consultant and use Copy control.

  • During creation of WBS element How to pass ACCount Assignment field as blnk

    Hi Experts,
    I am  creating of WBS element by using BAPI   ''BAPI_BUS2054_CREATE_MULTI'' .
    during creation, passed the ACCount Assignment field  as blank.
    but when i check that WBS in CJ20n that ACCount Assignment field in coming as checked.    Please suggest me how to pass this field as blank.
    Thanks
    Susant
    Edited by: Susanta22 on May 9, 2011 6:08 PM

    I have same issue. how you resolved it.

  • Item Field Appearing In Account Assignment Field

    Hello
    I have added the customer specific field at the item level of the shopping cart and added the code in BBP_DOC_CHANGE_BADI. When I activate teh BADI this field also appears in Account assignment fields which shudnt appear and when i deactivate the badi it doesnt appear in account assignment fields. Was there something wrong in the badi implementation. Please help.
    Thanks
    Viky

    Hi
    As I told you earlier, Please refer to the SAP OSS note - 672960.
    <u>Here are the details -></u>
    <b><u>Account assignment fields</u></b>
    For the account assignment fields, use the INCL_EEW_PD_ACC_CSF structure. The account assignment fields are independent of the document type. To display the fields on the account assignment detail screen, you must carry out the following steps:
    1. Use Transaction SE16 to include the user-defined fields that were defined in structure INCL_EEW_PD_ACC_CSF in table BBP_C_ACC_F.
    2. Include the fields and the texts for the account assignment fields from INCL_EEW_PD_ACC_CSF in table BBP_C_ACCFD (according to point 1).
    3. In the IMG activity ' Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Account Assignment -> Define Account Assignment Categories', you can now add user-defined fields to existing account assignment categories.
    <b>Alternatively, you can use BBP_CUF_BADI_2 to hide all the unnecessary fields from Display in the Shopping cart.</b>
    Hope this will help.
    Regards
    - Atul

  • Make Account assignment field mandatory in VF01 at item level

    Hi All,
    I want to Make Account assignment field mandatory in VF01 at item level in accounting block.
    Please guide.
    Thanks ,
    Salman Zahir

    Hi,
    Goto T.Code:SE51
    Program name:SAPMV60A
    Screen number:6106
    Select Flow Logic.
    Click on Change.
    Click on elelment list tab.
    Search for VBRP-KTGRM field.
    Two options you are going to identify.Select the  entry which is having the "type of screen element" as "I/O".
    Click on special attributes.
    Input is enabled as "Possible".Change it to "Required" from drop down.
    Save.
    It will be appeared as mandatory.
    One more way is use of an exit.
    Ask your ABAPer to check for this field  entry while saving the invoice.As we know incompletion log will not work out here in invoice,so we are going for an exit.
    If there is a value for this field then only we can save the invoice,else not.
    Regards,
    Krishna.

  • Creating multipile AUC's for single investment order (internal order)

    Hi All,
    Can any one tell me how do i create multipile AUC's for single investment order (internal order).
    Thanks & Regards
    Praveen

    Hi
    You can create Multiple AUC for an internal order by configuring AUC per source structure in customizing.
    You need to give separate AUC asset class for each Source structure. By activating Manage AUC the system can be configured to create AUC automatically
    Thanks
    Anand kumar

  • In VA01 Item detail screen tab Account assignment field  Internal order ???

    Dear Experts,
    In T.code VA01
    item level data tab Account assignment there is field internal order , here if i created internal order that internal order should come automatically into that field
    e.g. i have one article / material for that i created one internal order where i put all expenses through T.code FB50 and i want to add sales revenue for that while creation of sale order i am putting internal order manually in T.code VA01
    so my question is  the same task can be possible automatically or not
    i have two thoughts
    1) either that internal order should assign to article or material master data or
    2) status profile has some link with internal order type (so by default link with internal order ) and there is provision in T.code VOV8 and VOV7 we can add status profile .
    Question
    IS IT POSSIBLE INTERNAL ORDER SHOULD COME AUTOMATICALLY IN SALES ORDER ITEM DATA ACCOUNT ASSIGNMENT TAB AS PER ARTICLE / MATERIAL
    PLEASE GUIDE

    Hi Ravi,
    it is due to profit centre accounting / costing is active, it is better to get it clearified from a FICO consultant
    regards,
    Santosh

  • Material Account Assignment Group, in Sales Order Mass Update

    Sd Experts,
    We just went live, our consultant updated Account assignment group at the material level but did not updated existing materials. When we caught the problem and updated exisisting materials there were some existing orders already created. Which now I am getting an account determination error due to this field being empty at the material level.
    We have some sales orders that I need to update but they are just too many, currently I have been fixing them thru VF02, for to the material and update manually.
    Does anyone has any idea how to mass update this field for all existing orders, to update "Account Assignment Group" field automatically
    Your help will be greatly appreciated.

    Hi
    In Mass transaction choose object type as #BUS2032,after executing in the next screen from the tables choose#Sales Order Item Data, and from the fields choose#AcctAssgGr (MASSSDHE)-MASSSDHEAD_S-KTGRD, now execute to find fields Sales document and Sales Document item , here load all the Sales Orders for which the change is needed along with the items for which the changes are needed execute again to find the next screen with Sales Documet, Sales Document item and Account assignment which needed to be changed,now select the entire block enter new values in the Account assignment  box in the above, click on the 'Carry out MAss change button ' and then save, it will take some time basing the change tobe carried and issues a log as to how many documents were changed
    Hope this is clear,please do a test run before.
    Regards
    Chandra

  • Change of Account Assignment (WBS) in Sales Order

    While crteating a sales order w.r.t. quotation, account assignment is automatically made with the WBS mentioned earlier in the quotation, which is showing grey (disable). But what is the procedure for changing the WBS in the sales order.

    Hi,
    Go to XD99,
    1. Select the table ie KNVV in the tables tab, select the fields tab and select the fields u would like to change for eg Acct assignment group
    2. Execute the report
    3. U will come to the screen where u can restrict the entries.
    Enter the criterion say
    Cust: Test 1
    Sales Org 8000
    Dist 08
    Div 08
    4. Again press execute
    5. Enter the new values you would like to have
    6. Now select columns of the new values and press carry out mass maintainence button in the new values area
    7. Press Save
    8. u will then receive a success message
    Best regards
    Mahesh

  • WBS Account assignment problem in Sales Order

    Dear Expert,
                       I have one material whose I am creating sales order.After pricing , when I assign respictive WBS element as account assignment It is picking default Project name and which is not respective of what i want to assign.Can anyone put some light on it.
    Actually I am PS consultant , so don't know is there is any config for that in SD.
    Regards
    Edited by: astosh on Apr 14, 2011 10:10 AM

    Hi Ravi,
    it is due to profit centre accounting / costing is active, it is better to get it clearified from a FICO consultant
    regards,
    Santosh

Maybe you are looking for