Account assignment for service item not copied from PR in PO

Hi,
We have a PR created for a service item from SRM. When we run ME59 it automatically creates the PO without issues by copying the account assignment details from the PR. The problem is as follows:
1. If we try to manually create a PO using ME21N from this PR, the account assignment is not getting copied from the PR but it throws the account assignment pop up screen where we manually have to enter the account assignment.
2. The client is using a Z transaction of ME59 which is copy of Me59 but with a few validations (nothing to do with Account assignment). This Z Tcode also fails to create the PO with the error 'no account assignment'. Indicating that the PR account assignment details are not getting copied.
Note: This is happening for all PR's irrespective of whether its created in SRM or created using ME51N.
Please let me know if someone has faced a similar issue
Thanks,
Lakshmi

Hi,
Please check first if notes 1085214 and 1102653
could solve the issue.
Regards,
Edit

Similar Messages

Account assignment for group asset is different from that in asset

Dear experts,
I have creted one main asset . and i have created group asset. and my main asset class and group asset class are both are different.If i continue that error assets are shoud be craeted .but the depreciation key and usefull life and ordinary depreciation will going and it's showing grey.
My question at the time of assighning the group asset for the particular assets the below error is comming.
Account assignment for group asset is different from that in asset
Message no. AA810
Diagnosis
The account allocation 14000 of the group asset 140000001 0 is different from account allocation 1000 of the asset.
System Response
This error needs to be corrected for balance sheet valuation (usually determined in depreciation area 01). For all other depreciation areas, this is only a warning you should check.
Procedure
Check your entry. When an individual asset has a different account assignment than the group asset, it is not possible to reconcile the individual asset to the group asset in reporting by means of accounts.
kindly help on this issue
regards
venkataswamy

Hi sudhakar
Thanks for your reply
1) for example i have buliding asset class and i have one group asset class.under the building asset account determination i have assighned the gl a/c for both b/s and book deprecitaion
In groups asset class also i have done same things. i have craeted asset under building asset class and created one asset under group assets.
then assighned the group asset to main assets. the error is comming like this Account assignment for group asset is different from that in asset
I have serched in sdn forum and service .sap.com . they are saying you can use same gl a/c for both asset class.for depreciation .i have tried this scenario. still i am getting the same error and same problem.
The most important thing is we are working on ECC 6 versions
sap note 76186.
Kindly help me
Regards
venkataswamy
Edited by: venkataswamy bathini on Jul 6, 2009 9:22 AM

BAPI_PO_CHANGE "No account assignment for service 0000010" SE 518 Error

Hi Friends,
I am using BAPI_PO_CHANGE to add new line item with service data to purchase order.
For one scenario BAPI give me above error is "No account assignment for service 0000010" SE 518 .
basically when i pass outline aggrement and contract item to bapi i am getting this error.....according to my observation in outline agrement account assignment is maintain as 'U' but i want to pass outline agrement as 'K' or 'N' so i am passing this into BAPI parameters ,however i feel somewhere it is getting conflict so it giving above error...
Please guide,
Thanks & Regards,
Bhaskar

Hi Seini,
Thanks for reply ..
I have pass contract number to BAPI ....and i also pass cost center and GL account to account assignment but still bapi giving same error.....I am totally stuck into this i tried a lot with different options..for other scenario BAPI works fine but when I pass contract number with account assignment 'U' and I want to change this 'U' to 'K' or 'N' for this I pass account assignment to PO line item but BAPI fails in this perticular scenario.

Incorrect account assignment for service PR after IW32 save

One service PR was created thourgh Tcode IW32 by BDC program (recorded through SHDB). Account assignment data of Service PR is absolutly correct and remains the same for the further PR & PO processing.
In case of any changes in the service PR through IW32 (again BDC program), GL account of Service PR is not getting derived and Gl account becomes null subsequently commitment item is not getting derived.
IW32 save is getting failed by error message 'No commitment item is derived/entered for item.......'.
By searching SAP OSS Notes, found 2 nos. similar notes 802965 & 956751 but both are alreay corrected through support package ECC6.0 - 006. our support package is 013.
This nature of problem is facing through IW32 transaction (without BDC program). Unable to find any errors in IW32 change BDC.
Unable to understand the problem. Please help.

Hello,
during this Run of BDC what Information your changing at PR afte calling it Via Iw32.
Regards,
Rakesh

Items not copied from PR to PO

Hi
thirdparty order was created for 5 different items, same PR was created for all the items. But when user tried to create PO from the given PR system copied only 4 materials and not copied the 5th lineitem.. any possible reasons?
Reg
Shan1242

Hi,
check 4 th item is release or not if u have release procedure at item level
shakir
Edited by: Shakir on Jan 28, 2008 10:02 PM

Plan Price for GR item not updating from mt. master,but taking sum of GI it

Hello
I am using a MTS scenario with 10 strategy. The price in the production order cost analysis view for GR item is not updating with material master price, but it is updating with a sum total price of the materials for GI in the production order. The price control for header GR item is 'S' and for all GI items it is 'V'.
How to get the price from the material master for the GR item (order header item)?
Thanks,
Abhi.

Check costing variants assigned for planned and actulas in order types ( u can see costing variants in production with CO03 in control tab).
Check the valuation variant for which priorities given like std price, average price etc.,
Please note that while confirming the production order the GR will happened based on the strategy given in valuation variant and it will take from material master.
I think in your valuation variant "average price" has given higher priority and average price existed in your material master.
System won't sum up all raw material costs and put it into GR, unless otherwise any user exit given.
regs,
ramesh b

Item not copied from Lead to opportunity (SAP CRM)

Hi guys,
I think that the object of tread is explicative
But i explain my problem: when i save a lead, with a certain status (yet customized), i want to the system create with follow up document an opportunity from my lead.
If i create a lead without product the system create an opportunity very well, but if i insert a product on my lead the systema don't create an opportunity, i see that in activity tab the event raise up but the opportunity is not create.
i have cusomized the action for process type and for category of item but it doesn't work.
Anybody can help me?
Thanks in advance.
Regards,
Luca

Check:
1. if you have set proper copy control between lead and opportunity transaction type under spro>crm>transactions>basic settings>copy control for business transactions>Define Copying Control for Transaction Types (you may wana try first without checkmark "Complete reference")
2. if you have set proper copy control for ITEMS between lead and opportunity ITEM types under spro>crm>transactions>basic settings>copy control for business transactions>Define Copying Control for Item Categories (first set checkmark just for "Copy PO data")
3. if you have set any copy control for ITEMS between lead and opportunity ITEM types under spro>crm>transactions>basic settings>copy control for business transactions>Define Item Category Determination when Copying (I suggest you first try without setting any entries in this customazing for your item types)
4. what method are you using for follow-up (I ussualy use COPY_DOCUMENT method)
Regards.

Items Not Copied from I-Tunes

I recently had to send my laptop in to fix a problem with it's power source and now I have it back and something has changed. I am trying to Sync up and buy some more songs and when I plug my I-Pod in it says "Some items in the I-Tunes Library were not copied because you are not authorized to play them on this computer". Nothing has changed and it is only the songs that were purchased. I have done it several times and every time the songs weren't copied. What can I do when I haven't changed anything?

Odds are they changed the logicboard/motherboard of your laptop when they sent it in, meaning iTunes thinks it's a new computer that needs to be authorized. Play one of the songs in iTunes, and you'll get asked for your iTunes Music Store username and password. Enter them. Once the song starts playing, you'll be able to sync your iPod fine and all the songs will be authorized.

F5670: No Account Assignment for line item 002 account type S

Hi Experts
I have created assesment cycle for transfering cost from an cost center to an statistical order. While executing assesment cycle in test run, it executes successfully. But when I take out the test run tick, it gives above error.
Pls help
Regards
Bhavesh Jain

Hi,
Maintain account determination for reconciliation posting (transaction OBYB). Specify the posting keys for general G/L account postings. Example:
Posting key 40: Debit posting
Posting key 50: Credit posting
check the business transaction and maintain require setting in OBYB
Regards
Ravi Kumar

Mandatory default account assignment for HIBE material

Hi,
For stock transfer PO we need account assignment Mandatory with default value "K" while creating the stock transfer PO.
How we can do this?
With Best Regards,
Rajkumar

Thanks for the reply.
We want the same functionality as described by you.
The requirement is that, when the stock transfer PO will be created the account assignment for line item of HIBE type (only) should be displayed as "K" i.e. Acct. assig. is mandatory and default equal to "K". With this restriction the user creating the Stock transfer PO for HIBE material will be prompted to enter cost center and GL account. And when goods receipt will be made for the PO, the HIBE material will get consumed for cost center.
So, can we made such restrictions while creating stock transfer PO?
With Best Regards,
Rajkumar N. Phand

Ability to modify Account Assignment Category for Service Item Categories

Dear experts,
Our customer has a requirement to modify the account assignment category when the item category is set to "D" services on a PR and PO line item. This scenario is specific to indirect procurement scenarios in SAP ECC 6.0 MM.
End users may potentially create a PR against a service item category with an incorrect account assignment category. These PRs are created using free form text. No service master exists in these scenarios. During the approval process or during PO creation, an approver or the buyer may need to correct the account assignment category. The account assignment category is "display" only and cannot be modified when the item category is set to "D". The user must delete the line item and create a new line item with the correct account assignment category. The copy function cannot be used because the account assignment copies from the existing line and cannot be modified.
Any recommendations to this issue using standard SAP configuration solutions?
Thanks,
Jennifer

Item Category to Account Assignment Category combination is already configured. For Service Item Category, we have three account assignment categories configured. All three categories are valid in different scenarios. Sometimes the user selects the incorrect account assignment category (out of the three available) depending on the business scenario. PT9F configuration is already set to Account Assignment category "optional". However, the account assignment category still cannot be modified on the PR when the item category is "D" service.
Any other recommendations?

Unloading point is not copied from PR -PO,when i change account assignment

Hi All,
unloading point is not copied from PR -PO,when i change account assignment from 'K' to 'F' in PO. unloading point field should be in display for both 'K' & 'F' Account assignment category in SPRO because we r using this field to acknowledge my thirty party planning system.
Thanks in advance
Vengal Rao

Have a look at SAP note <a href="https://service.sap.com/sap/support/notes/734273">734273</a>

Error in account assignment for item

Hello,
We have configured EBP at Stack 03 in SRM release 550
We are facing problem to create shopping cart,
Already it was working fine but now at the time of adding item to shopping cart it shows below error
messages
1.Version 0 is not defined for fiscal year 2007
2.Error in account assignment for item
For your reference error screen is given in attached document.
pls advise
Regards,
Santosh

Hi Christophe,
I am getting the same error <b>'Version 0 is not defined for fiscal year 2007'</b> when tried to create a Sales Order in IDES system and I am trying the solution to add the fiscal year 2007 in T.code OKEV but it fails.
The steps what I have done :
1. Go to OKEV
2. Selecting control area 1000
3. Selecting the version 0 line
4. then trying to open the Settings for Each fiscal year from Dialog Structure
The error i get is :
<b>E: Activation of the indicator is not permitted</b>
and the highlighted line in red is for Version 1
The default indicator is set for version 1 is Plan, WIP/RA, Variance & Legal Valuation (Valuation view)
I tried in many ways to 'uncheck' the boxes for this version 1 but fails.
Pls help.
regds,
Umesh

Item 000002 is not copied from the reference document

Dear All,
I am facing a typical problem while creating Price difference sales order w.r.t. invoice.
Document types in the system are -
Z2FC - Normal Sales order type, ZPD - Price change order type, Z2FB - Normal invoice type
My item category determination is -
Doc. type - Itm cat. gp. - Usage - Hghr itm cat - Default itm cat. - Manual itm. cat.
ZPD         -   NORM         - blank   - blank           - G2N                  - L2N
ZPD         -   NORM         - blank   - G2N            - G2N                  - L2N
Z2FC       -   NORM         - blank   - Blank           - TAN                  - TAP
Z2FC       -   NORM         - blank   - TAN            - TANN                - TAN
Copy control is -
Z2FB to ZPD for item category TAN with proposed item categories are G2N and L2N.
Z2FB to ZPD for item category TANN u2013 requirement 302 [Do not copy item]
During my Z2FC sales order creation I was having line items as follows
Item no. - Mat. code     - Qty -      Higher level item - Item category - Amount
10         - 101329          - 3     -      blank                 - TAN                - 35,000.00
20         - MC091234    - 3     -      10                      - TANN             - 0
30         - MC091234    - 1     -      10                      - TAN                - 5000
We are not using the sales BOM. I need to provide line 20 free to the customer. Hence I have manually maintained 10 in the higher level item column for the line item 20. The item category determined was TAN. Then I had changed it to TANN manually. So the amount became zero. Line 20 became the child and line 10 became parent.
At the same time customer also wishes to buy the material code MC091234. Now the material code MC091234 is of HALB type where as the material code 101329 is of FERT type. There is validation in the system that only FERT type of material could be sold and HALB type of material could be supplied as free. [With item category TANN]. In case HALB type material is also required to be sold then I need to manually maintained value in the higher level item. So I had maintained the value 10 in the higher level item column for the line item 30. The default item category determined is TAN. The invoice is also created properly. [Z2FB type]
But when I am creating the invoice correction document type ZPD w.r.t. Z2FB type invoice, I am able to get the two line items for the material code 101329 in line item 10. One each for G2N and L2N item category.
But for the material code MC091234 in line item 30, I get only one line item with item category G2N. I did not get another line item for the material code MC091234 for the corresponding L2N type item category
At the same time following messages are displayed
Message no. V1475 Item category for item 000002 cannot be determined and
Message no. V1476 Item 000002 is not copied from the reference document
Please help.
Thanks in advance
Piyush Ranpura

Dear All,
Any help???
Yet my issue is unresolved.
Thanks & Regards
Piyush Ranpura

MD04 for account assignment E and item cat L

Hi
I have created PR for perticular material X by running MRP. PR is created with account assignment catagory E and item catagory L. now i converted this PR into PO. my problem is PO is not visible in MD04 for x material. only PR is visible.
what is the problem

Hi,
Please can you explaing the scenarion you arew orking on? I didn't observe the combination of Sales oder with Subcontracting??.
For creating PO,it is not supporting PR document with account assignment E and Item categorty L.For this you may need to change config settings.(If try to change config settings...first you have think are changes really align with the business)
Thanks,
Sateesh.

Account assignment for service item not copied from PR in PO

Similar Messages

Maybe you are looking for