Account assignment tab is missing in PR(item details)

Hi
When we create PR,we select 'K' in the Account assignment in the item overview details,which will allow us to fill the details for G/L account and cost center in the item details,but to surprise account assignment tab is missing ,even we checked the layout settings also,No clue on this.
Is something am i missing or any problem.
Thanks
Lily

Hi Seema
Yes,you are right,after giving Account assignment category also it is not displaying
that tabb in item details.but for all users it is able to diplay,only one user is having this problem,is there any particular setting for this in the user or some layout settings?
Thanks
Lily

Similar Messages

Account assignment tab is missing

Dear All,
While creating a PO/PR without account assignment category, the account assignment TAB is missing for the item level detail. Pls help.
Regards

Hi,
If you are not giving any account assignment in PR / PO then you cannot see the account assignment tab in Item level detail tab.
If you enter account assignment then only it will be activated in the Item detail tab so that you can enter the particular account assignment details like Cost center / GL accounts / Profit center / Sales Order etc.
Revert back in case doubts.
Reg,
Ashok
Rewards welcome.

Account assignment tab missing

Hi All,
We have created a project in PS.
While generating Purchase Requisition thru MRP in MD51, account assignment category (Q) is coming, but the account assignment tab is missing in the purchase requisition.
But when we are generating PR thru CJ20N with prelimnary requirement as a procurement indicator then the WBS is getting fetched in Account assignment tab.
Please assist urgently,
Thanks
Sanjay
Edited by: Sanjay Sabnis on Dec 3, 2008 3:49 PM

Problem cracked.
It was due to MRP plant parameters not maintained in OPPQ.
Thanks

Account assignment tab

Hi All,
We have created a project in PS.
While generating Purchase Requisition thru MRP in MD51, account assignment category (Q) is coming, but the account assignment tab is missing in the purchase requisition.
But when we are generating PR thru CJ20N with prelimnary requirement as a procurement indicator then the WBS is getting fetched in Account assignment tab.
Please assist urgently,
Thanks
Sanjay
Edited by: Sanjay Sabnis on Dec 3, 2008 3:50 PM

Hi
Yes when we create PR or PO manually there is no problem. Account assignemtn tab is present
and behaving normally.
It is only problem when creating PR created thru MRP run.
Can you please provide some more check-points for config settings?
Thanks
Sanjay

Sales order no and line item no in account assignment tab of line item no.

Hi All,
When we display a sales order and go to line item --> Account assignment tab --> we can see sales order no and line item no in that screen. We want to know from where this existing no. in that field is populating from.
We want to know this as we want to check feasibility of changing sales order and item no to maintenance contract no and line item no. ( Maintenance contract we have to pick from notification)
If anybody has any idea about this do let me know as this is urgent requirment.
Effort will be rewarded.
Thanks in advance.
Edited by: Satish Bharambe on Jul 4, 2008 10:38 AM

Hi Satish,
You mean Accounting assignment tab-->In Settlement rule details
If yes the order number which is coming in that field Sales order and for which sale order you are looking that details both are the same numbers(i.e Nothing but sales order number).
When you create sales order system will give number of the sales order the number will come in this place.
I hope it will help you,
Regards,
Murali.

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

Add field 'asset' in sales order line item account assignment tab

Hi,
I would like to add the following field: 'asset' in sales order line item account assignment tab.
I can enter order, or wbs, but not Asset.
How can I make this field visable?
Anybody?
thanks,
klundert
Edited by: Eric Van Zundert on Oct 30, 2010 8:43 AM

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

How to keep the WBS & Order in account assignment tab of SD contract item?

Hi Experts,
If I remove the plant from the shipping tab in the contract item (the contract type is WV), I will be able to enter the WBS or Order in accounting assignment tab. However, if I enter the plant (in order to determine the tax in pricing), the WBS and Order are disappered and there is one new settlement rule button showed up.
Do you know any configuration could keep the WBS and order in the accounting assigment tab even the plant is there.
Thanks in advance!
Norman

Hi Chandra,
Thanks for your answer. However, I even added the plant in the WBS, the tax (we use tax jurisdiction) still could not be determined.
The problem is that SAP changes the account assignment tab screen (it suppresses the WBS and Order fields, but addes settlement rule) with the plant in the shipping tab. Do you know how to keep the same account assignment tab screen with the plant in the shipping tab?
Thanks,
Norman

Order field at item level Account Assignment tab in Inquiry

Dear All,
What is the purpose of u2018Orderu2019 field in account assignment tab of Inquiry?
When we are running sales pricing DP81, face the error u2018reference is incompleteu2019. So, I had to give the Order no. If it is intended for Profitability segment, what is the importance to PS?
We have assigned WBS and system det. Profit centre from WBS. But, getting the error u2018Order xxxxx is a networku2019 while trying to give network no. from dropdown button.
Is there a possibility, we can suppress the Order field.
Also, where does (tcode) system pick the values for item category in sales pricing? Cause, the required determination exists in VOV4 and in material master.
Regards,
Venkat

item category is determine from Item Catergory group in Mat master and Sales Doc Type.

Table Control Variant For ME21N - Item level - account assignment tab.

Dear All,
I want to change Table Control Screen that is in Me21n(Service PO)>Item level> Account Assignment tab -> Table control.
In that table control i want to add one column Name is OrderNo(AUFNR) ,but system is not changing the table control.
When i m going to change table control scrren in ---> Condition tab its working fine but not for above case.
Please guide me to solve this issue.
Regards,
Sanket.

Please provide the solution.
Regards,
Sanket.

PO Account Assignment Tab in ECC - with Split Accounting

Hello,
We currently are using Funds and WBS Elements within our SAP system. When both a fund and a WBS Element are used on one line item within the shopping cart, I am able to see all of the information (fund, wbs element, fund center, cost center, commitment item, etc). However, after the purchase order is created and transmitted to ECC the "Account Assignment Category" is marked as "X - All aux.acct.assgts." and the account assignment tab only has the following column headers:
- Sequential Number of Account Assignment
- Quantity
- Distribution Percentage in Case of Multiple Account Assgt
- Cost Center
- G/L Account Number
- Order Number
- Asset Subnumber
- WBS Element
- Sales and Distribution Document Number
- Sales Document Number
- Delivery Schedule Line Number
- Unloading Point
- Goods Recipient/Ship-to Party
- Deletion Indicator: Purchasing Document Account Assignment
I can see that the fund is within the EKKN table (Field: BP_GEBER) but for some reason ME23N does not have this field in the Account Assignment tab when the category is "X". How do I add "Fund" into the Account Assignment tab so that it will be visible within ME23N?
Thanks,
Katie

IMG \ MM \ Purchasing \ Account Assignment \ Maintain Account Assignment Categories
Select details for AAC 'X' and view field settings below. Set Funds \ Funds Center to required setting e.g. Display.

What is the purpose of GL account in the account assignment tab of PO scree

hi,
in the purchase order screen, in the account assignment tab, there is a field labelled as GL account. May i know what is the purpose of this gl account because as far as i am concerned we need to specify the vendor gl account (in the vendor master) and the stock account and GR/IR account in BSX and WRX transactions in OBYC respectively.
In that case what is the purpose of specifyin a GL account in the purchase order account assignment tab?

Hi,
The fact is quite simple - When you are buying the material, you can be able to define if this is for inventorization or for consumption. If it is for inventory replenishment, then the stock account will be debited during GR posting. Otherwise, P&L account will be debited. The G/L account you have seen in your PO is always needed in case of direct consumption. At the time of GR posting, the posting lines will be -
1)   For stock item:
Dr     Stock Account (BSX Transaction/Event Key);
Cr     GR/IR Clearing Account (WRX Transaction/Event Key)
2)   In case of non-stock item:
Dr     P&L Account (GBB/xxx Transaction/Event Key where xxx is defined in the 'Account Modifier field of the related account assignment category setting in OME9 transaction - which is seen in the PO);
Cr    GR/IR Clearing Account (WRX Transaction/Event Key).
Cheers,
HT

Adding f4 help to wbs element field in account assignment tab of me21n

My requirment is to create f4 help for wbs element field in account assignment tab of me21n,
I have to pick wbs elements according to plant and storage location assigned in item overview of purchase order.
for that i have created a ztable. and use it in f4 code, or help me if any other suggestion u have.
thanks,
Amol.

Try to use screen-exit for assigning the serach help. There is one screen exit for PO ..
Check the enhancement - MM06E005 ,
Create project in cmod and use this enhancement.
use the PROCESS ON VALUE-REQUEST event and use FM 'F4IF_INT_TABLE_VALUE_REQUEST'
hope this will resolve the issue.
anya

Make Account assignment field mandatory in VF01 at item level

Hi All,
I want to Make Account assignment field mandatory in VF01 at item level in accounting block.
Please guide.
Thanks ,
Salman Zahir

Hi,
Goto T.Code:SE51
Program name:SAPMV60A
Screen number:6106
Select Flow Logic.
Click on Change.
Click on elelment list tab.
Search for VBRP-KTGRM field.
Two options you are going to identify.Select the entry which is having the "type of screen element" as "I/O".
Click on special attributes.
Input is enabled as "Possible".Change it to "Required" from drop down.
Save.
It will be appeared as mandatory.
One more way is use of an exit.
Ask your ABAPer to check for this field entry while saving the invoice.As we know incompletion log will not work out here in invoice,so we are going for an exit.
If there is a value for this field then only we can save the invoice,else not.
Regards,
Krishna.

In Milestone billing WBS elet field not visible in Account assignment tab

Hi Gurus,
Could you pls let me know how to make WBS element field to display in Account assignment tab (Item details of Sales order).
During Milestone billing in Billing plan tab WBS element is getting displayed where in for Account assignment tab it is not.
But for TAD (Service) and TAX(non stock) this WBS element field is viewable in Account assignment tab.
Pls suggest me if any transaction variants are required for this or not? Or else pls provide solution to sort out this issue.
Thanks in advance
regards....Divakaran

Hi Divakar,
refer this thread
wbs field in account assignment

Account assignment tab is missing in PR(item details)

Similar Messages

Maybe you are looking for