Account assignment tab is missing
Dear All,
While creating a PO/PR without account assignment category, the account assignment TAB is missing for the item level detail. Pls help.
Regards
Hi,
If you are not giving any account assignment in PR / PO then you cannot see the account assignment tab in Item level detail tab.
If you enter account assignment then only it will be activated in the Item detail tab so that you can enter the particular account assignment details like Cost center / GL accounts / Profit center / Sales Order etc.
Revert back in case doubts.
Reg,
Ashok
Rewards welcome.
Similar Messages
-
Account assignment tab is missing in PR(item details)
Hi
When we create PR,we select 'K' in the Account assignment in the item overview details,which will allow us to fill the details for G/L account and cost center in the item details,but to surprise account assignment tab is missing ,even we checked the layout settings also,No clue on this.
Is something am i missing or any problem.
Thanks
LilyHi Seema
Yes,you are right,after giving Account assignment category also it is not displaying
that tabb in item details.but for all users it is able to diplay,only one user is having this problem,is there any particular setting for this in the user or some layout settings?
Thanks
Lily -
Account assignment tab missing
Hi All,
We have created a project in PS.
While generating Purchase Requisition thru MRP in MD51, account assignment category (Q) is coming, but the account assignment tab is missing in the purchase requisition.
But when we are generating PR thru CJ20N with prelimnary requirement as a procurement indicator then the WBS is getting fetched in Account assignment tab.
Please assist urgently,
Thanks
Sanjay
Edited by: Sanjay Sabnis on Dec 3, 2008 3:49 PMProblem cracked.
It was due to MRP plant parameters not maintained in OPPQ.
Thanks -
Hi All,
We have created a project in PS.
While generating Purchase Requisition thru MRP in MD51, account assignment category (Q) is coming, but the account assignment tab is missing in the purchase requisition.
But when we are generating PR thru CJ20N with prelimnary requirement as a procurement indicator then the WBS is getting fetched in Account assignment tab.
Please assist urgently,
Thanks
Sanjay
Edited by: Sanjay Sabnis on Dec 3, 2008 3:50 PMHi
Yes when we create PR or PO manually there is no problem. Account assignemtn tab is present
and behaving normally.
It is only problem when creating PR created thru MRP run.
Can you please provide some more check-points for config settings?
Thanks
Sanjay -
PO Account Assignment Tab in ECC - with Split Accounting
Hello,
We currently are using Funds and WBS Elements within our SAP system. When both a fund and a WBS Element are used on one line item within the shopping cart, I am able to see all of the information (fund, wbs element, fund center, cost center, commitment item, etc). However, after the purchase order is created and transmitted to ECC the "Account Assignment Category" is marked as "X - All aux.acct.assgts." and the account assignment tab only has the following column headers:
- Sequential Number of Account Assignment
- Quantity
- Distribution Percentage in Case of Multiple Account Assgt
- Cost Center
- G/L Account Number
- Order Number
- Asset Subnumber
- WBS Element
- Sales and Distribution Document Number
- Sales Document Number
- Delivery Schedule Line Number
- Unloading Point
- Goods Recipient/Ship-to Party
- Deletion Indicator: Purchasing Document Account Assignment
I can see that the fund is within the EKKN table (Field: BP_GEBER) but for some reason ME23N does not have this field in the Account Assignment tab when the category is "X". How do I add "Fund" into the Account Assignment tab so that it will be visible within ME23N?
Thanks,
KatieIMG \ MM \ Purchasing \ Account Assignment \ Maintain Account Assignment Categories
Select details for AAC 'X' and view field settings below. Set Funds \ Funds Center to required setting e.g. Display. -
Sales order no and line item no in account assignment tab of line item no.
Hi All,
When we display a sales order and go to line item --> Account assignment tab --> we can see sales order no and line item no in that screen. We want to know from where this existing no. in that field is populating from.
We want to know this as we want to check feasibility of changing sales order and item no to maintenance contract no and line item no. ( Maintenance contract we have to pick from notification)
If anybody has any idea about this do let me know as this is urgent requirment.
Effort will be rewarded.
Thanks in advance.
Edited by: Satish Bharambe on Jul 4, 2008 10:38 AMHi Satish,
You mean Accounting assignment tab-->In Settlement rule details
If yes the order number which is coming in that field Sales order and for which sale order you are looking that details both are the same numbers(i.e Nothing but sales order number).
When you create sales order system will give number of the sales order the number will come in this place.
I hope it will help you,
Regards,
Murali. -
Change the Profit Center in Sales Order line item's Account assignment tab
Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
SonyHi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR -
How to Grey out cost center column in me22n screen(Account assignment tab)
Hi All,
I have tried many ways to do grey out cost center column in account assignment tab of ME22N.
i have created implementation for this class and method.
Class:CL_TABLE_VIEW_MM_2
Method:PBO_TC_LINE
Below is the my code snippet.Kindly let me know any suggestions.
data: l_tc type char100.
data: l_tabix type i.
l_tc = '(SAPLMEACCTVI)DYN_1000TC-COLS'.
FIELD-SYMBOLS:<fs_tcdata> type any TABLE,
<fs_wa> type any ,
<fs_lwa> type any,
<fs_screen> type any,
<fs_input> type any,
<fs_active> type any,
<fs_output> type any.
*data:fs_wa type SCXTAB_COLUMN_IT.
ASSIGN (l_tc) TO <fs_tcdata>.
LOOP AT <fs_tcdata> ASSIGNING <fs_wa>.
l_tabix = sy-tabix.
ASSIGN COMPONENT 'INVISIBLE' OF STRUCTURE <fs_wa> TO <fs_lwa>.
ASSIGN COMPONENT 'SCREEN-NAME' OF STRUCTURE <fs_wa> TO <fs_screen>.
ASSIGN COMPONENT 'SCREEN-INPUT' OF STRUCTURE <fs_wa> TO <fs_input>.
ASSIGN COMPONENT 'SCREEN-ACTIVE' OF STRUCTURE <fs_wa> TO <fs_active>.
ASSIGN COMPONENT 'SCREEN-OUTPUT' OF STRUCTURE <fs_wa> TO <fs_output>.
IF <fs_lwa> = space.
CASE <fs_screen>.
WHEN 'MEACCT1000-KOSTL'.
<fs_input> = 0.
ENDCASE.
endif.
ENDLOOP.
Regards,
HiriyappaAs I can't see any complicated scenario in your requirement. So I suggest you can achieve this by simple standard configuration.
Go to OME9, double click on the Account assignment category and make the field as Display.
Then check in your PO.
But I doubt, your requirement can not be simple like that.
So either you didn't know the settings or your requirement is different or you are just trying to learn that can it be possible via coding.
Let us know the appropriate reason for set it as display. -
Add field 'asset' in sales order line item account assignment tab
Hi,
I would like to add the following field: 'asset' in sales order line item account assignment tab.
I can enter order, or wbs, but not Asset.
How can I make this field visable?
Anybody?
thanks,
klundert
Edited by: Eric Van Zundert on Oct 30, 2010 8:43 AMHi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR -
How to keep the WBS & Order in account assignment tab of SD contract item?
Hi Experts,
If I remove the plant from the shipping tab in the contract item (the contract type is WV), I will be able to enter the WBS or Order in accounting assignment tab. However, if I enter the plant (in order to determine the tax in pricing), the WBS and Order are disappered and there is one new settlement rule button showed up.
Do you know any configuration could keep the WBS and order in the accounting assigment tab even the plant is there.
Thanks in advance!
NormanHi Chandra,
Thanks for your answer. However, I even added the plant in the WBS, the tax (we use tax jurisdiction) still could not be determined.
The problem is that SAP changes the account assignment tab screen (it suppresses the WBS and Order fields, but addes settlement rule) with the plant in the shipping tab. Do you know how to keep the same account assignment tab screen with the plant in the shipping tab?
Thanks,
Norman -
What is the purpose of GL account in the account assignment tab of PO scree
hi,
in the purchase order screen, in the account assignment tab, there is a field labelled as GL account. May i know what is the purpose of this gl account because as far as i am concerned we need to specify the vendor gl account (in the vendor master) and the stock account and GR/IR account in BSX and WRX transactions in OBYC respectively.
In that case what is the purpose of specifyin a GL account in the purchase order account assignment tab?Hi,
The fact is quite simple - When you are buying the material, you can be able to define if this is for inventorization or for consumption. If it is for inventory replenishment, then the stock account will be debited during GR posting. Otherwise, P&L account will be debited. The G/L account you have seen in your PO is always needed in case of direct consumption. At the time of GR posting, the posting lines will be -
1) For stock item:
Dr Stock Account (BSX Transaction/Event Key);
Cr GR/IR Clearing Account (WRX Transaction/Event Key)
2) In case of non-stock item:
Dr P&L Account (GBB/xxx Transaction/Event Key where xxx is defined in the 'Account Modifier field of the related account assignment category setting in OME9 transaction - which is seen in the PO);
Cr GR/IR Clearing Account (WRX Transaction/Event Key).
Cheers,
HT -
Order field at item level Account Assignment tab in Inquiry
Dear All,
What is the purpose of u2018Orderu2019 field in account assignment tab of Inquiry?
When we are running sales pricing DP81, face the error u2018reference is incompleteu2019. So, I had to give the Order no. If it is intended for Profitability segment, what is the importance to PS?
We have assigned WBS and system det. Profit centre from WBS. But, getting the error u2018Order xxxxx is a networku2019 while trying to give network no. from dropdown button.
Is there a possibility, we can suppress the Order field.
Also, where does (tcode) system pick the values for item category in sales pricing? Cause, the required determination exists in VOV4 and in material master.
Regards,
Venkatitem category is determine from Item Catergory group in Mat master and Sales Doc Type.
-
Details in "ACCOUNT ASSIGNMENT" tab in Shopping cart screen
Hi all,
We are on SRM 7.0.1.
For each requester,we have the EMPLOYEE role assigned.
In shopping cart screen,under account assignment,we want to see the acocunt assignment detailed view as the default view under tab "ACCOUNT ASSIGNMENT".Currently,under account assignment,user has to click on the DETAILS button and then the details show up in the bottom part of the screen.
Can anyone advise how do we change the default view for the "ACCOUNT ASSIGNMENT' tab?
Thanks.Can someone answer my query?
-
Profit Center in Account assignment tab
Hi All,
My Client wants to add a field "PROFIT CENTER" in account assignment tab in portal with F4 option and that value should be transferred to back end system as well. Please tell me how to achieve it.
Regards,
PrasathHi Prasath,
You can create a new account assignment category called profit center in configuration. Please refer to this thread Account assignment category Y in SRM - Profit center field
Kind Regards,
Hari -
Include GL description in the PO Account Assignment Tab
Dear all,
The user is requesting a GL account description also in the account assignment tab on PO.
TO be more clear, along with the GL account, the description of the account should also appear in the account assignment tab of the PO created.
Please let me know if this is possible.
Thanks in anticipation
Srikanth.HI
As per SAP standard Practices its not possible to get Description in the PO Account Assignment.
You need to change the SAP standard Code
Ravi Pasumarthy
Maybe you are looking for
-
I got a Bluetooth adapter hooked up to my Harman Kardon AVR 130 Receiver, to play Music i connect my MacBook Pro to the Bluetooh adapter. Is it possible (since the Receiver plays 5.1 sound, and i have 5.1 speakers) to play my iTunes music via bluetoo
-
Can't import videos into iMovie
Hello, there! I just captured a few videos with my screen capture app on my windows laptop. After I transferred them onto my iMac and converted them into .mp4 files i wanted to import them into iMovie but when i selected them only video 4 and 6 out o
-
Field BUDAT in 2LIS_02_ITM
Hi, In the specification for field BUDAT it says that this is the Posting date of Goods Receipt or Invoice Receipt for the PO. But when both GR and IR are done, we want both dates to be listed. Ex: GR posting date 01.07.2007, IR posting date 05.07.20
-
Hello I have created the New output type in Invoice Verification (MR), i am not getting the output type in the MIRO Transaction in messages. When the select from the F4 option there are only two output types MLPP REKL Whatever the O\P type i have cre
-
Help with the audio!!!
I am trying to synchronize two different tracks in the same video and still. But I can not reduce the sound in the same way that we did in iMovie06/07 in which you just have to click in the track line up or down and adjust the volume. Can we do that