Account Detail field not working in FV50

Hi SAP Experts,
i have an issue on FV50 (park G/L account document);
If i capture an Account Detail (this field is available in Ecc 6.0) this field will not be saved when the invoice is parked.
Its only get saved when the invoice is posted! and if the parked document is changed thru FBV0, any changes in this Account Detail field will not be saved.
Many thanks in advance for your valuable suggestions.
Pavan Kumar P
Edited by: Pavan Kumar.P on Sep 8, 2008 5:08 PM

Dear Friend
Check whhiuch variant u are using sometime its b cause of that also these type of problems arises.
Jain

Similar Messages

Custom Master Detail form not working In EBS

Custom Master Detail form not working In EBS
Hi all,
I have two custom tables -- 1) XXX_DIE_Headers
2) XXX_DIE_LINES
I developed a Master Detail form based on above tables. XXX_DIE_Headers is the Master Block (Single record) & XXX_DIE_LINES is the detail block ( Multi line block ).
Yes, I used Appstand,Template.fmb for developing this form. The Master block has three fields out of which Two are required fields and i have given initial value for them.
As i deployed it in APPS(EBS),everything about it is working fine (insert,delete,master-detail behaviour) except querying.
When i press F-11 , It pops up a message "Do you want to save changes you have made" Choice - yes,no,cancel.
I don't want this message to pop up.
The scenario is :- I open the form.( without entering ) Press F11 . The message Pops up.
Please give me suggession on how to work it around so as form directly goes to query mode ,without popping the message.
regards
ravi

It seems that you are changing a database value in your form, do you have any changes in WHEN-NEW-FORM-INSTANCE???
what the form is trying to tell you that you have changed something, do you want to save it?
I suggest you debug your form and see what's happening step by step.
Tony

Service Account details are not going through header(OSB Business service)

Hi
I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
Can someone please help me why service account details are not going through business service request. Am I missing any steps?
Thanks in advance
KK
Edited by: 966531 on Oct 23, 2012 4:23 AM

Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
Regards,
Anuj

HT4865 Have tried to verify my icloud account, but its not working the Verifying screen is just scrolling round, but not doing anything

Have tried to verify my icloud account, but its not working, the Verifying screen has been scrolling for ages now, it seems stuck, but it wont let me do anything, please help

" I ordered the Snow Leopard software and tried installing it, but it stopped and said to clean the disk."
First off, your installation disc is in all likelihood faulty.
This has been a known issue in the past:
Faulty Snow Leopard install discs - Apple has no timeline on ...
http://store.apple.com/us/help/returns_refund#policy:
*You can return software, provided that it has not been installed on any computer. Software that contains a printed software license may not be returned if the seal or sticker on the software media packaging is broken.

AT END OF for char field not working

Hi all,
AT END OF (char field) not working,
I sorted the itab and also avoid the stars(*) problem also, but its not working.
Thanks in advance.
Edited by: Vijay Babu Dudla on Jan 28, 2009 11:01 PM

Hi, Niranjan
Test the following Sample Code it will solve out your Problem,
" This is not working properly right now.
TYPES: BEGIN OF t_name,
name1(10), " if You Change Cut the Name2 from the 2nd line and past it up to the Name one will work fine
name2(10),
amount1 TYPE p,
amount2 TYPE p,
END OF t_name.
DATA: it1_sum TYPE STANDARD TABLE OF t_name WITH HEADER LINE,
      wa_it1_sum TYPE t_name,
      it2_sum TYPE STANDARD TABLE OF t_name WITH HEADER LINE,
      wa_it2_sum TYPE t_name.
wa_it1_sum-name1 = 'AAAAAA'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 500.
wa_it1_sum-amount2 = 200.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'AAAAAA'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 500.
wa_it1_sum-amount2 = 200.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'BBBBBB'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 100.
wa_it1_sum-amount2 = 200.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'AAAAAA'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 500.
wa_it1_sum-amount2 = 10000.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'BBBBBB'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 105000.
wa_it1_sum-amount2 = 20500.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'BBBBBB'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 21000.
wa_it1_sum-amount2 = 22000.
APPEND wa_it1_sum TO it1_sum.
SORT it1_sum BY name1 name2.
LOOP AT it1_sum INTO wa_it1_sum.
APPEND wa_it1_sum TO it2_sum.
AT END OF name2. " When you will use this in this Condition it will give you wrong Because this row is on number two and
                   " it is not changing but the Row one is Changing so it will work fine if LEFT MOST
    SUM.
    wa_it1_sum-name1 = 'End Name 2'.
    wa_it1_sum-name2 = 'End Name 2'.
    APPEND wa_it1_sum TO it2_sum.
ENDAT.
AT LAST.
    SUM.
    wa_it1_sum-name1 = 'At Last'.
    APPEND wa_it1_sum TO it2_sum.
ENDAT.
ENDLOOP.
Please Reply if need more help about it.
Kind Regards,
Faisal

Master-detail: detail field not displayed after changed by master field

I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team

Transfer account from old MBP to new one and now my account password does not work.

I trasferred my account from one MPB to a new one using targeted disk method. I left my desk while it finished and came back to a registration page. I registered and the system rebooted. Now I see my login details but the password form my old Mac fails. The hint it gives me also seems to be bogus becaues I've tried many variations of the hint and they also do not work.
I'm submitting this from my original MBP and had not problem using my old password logging in to it. Why didn't my password transfer properly and now how do I fix my new MBP?
I made sure duing the transfer process to select everything for transfer -- accounts, applications, etc. All check boxes were checked.

AKAspuds wrote:
I trasferred my account from one MPB to a new one using targeted disk method. I left my desk while it finished and came back to a registration page. I registered and the system rebooted. Now I see my login details but the password form my old Mac fails. The hint it gives me also seems to be bogus becaues I've tried many variations of the hint and they also do not work.
I'm submitting this from my original MBP and had not problem using my old password logging in to it. Why didn't my password transfer properly and now how do I fix my new MBP?
I made sure duing the transfer process to select everything for transfer -- accounts, applications, etc. All check boxes were checked.
So now you have 2 accounts, logout of this one and in to the other.

Account Assignment Trigger not Working

I'm working on Siebel Assignment Manager.. first I try to Assign Service Request to an Employee and in two Assignment mode (Batch and Dynamic) and it's work fine.
but when I try to assign Account to a Position, and I follow the same steps I followed before, the monitor work and the owner change depending on the Score and the Rule not working ...on the other hand the trigger (Dynamic) not working at all, and there is no change
I have searched to know where is the problem …and didn’t find solution
please help me ASAP
Thanks & Regards,
Enas

Hi Glenn,
Thanks for u r replay.
We are using our own ZVIEWS. We have copied the Bupasearch view and we done some modifications according to our requirement.(added DOB field)
We got DOB in our Zview. But Customer search functionality is not working.
Plz help me to solve the issue.
Thanks,
Sreedhar

Help for date field not working after upgrade

hi experts,
In our BSP application for a page we had an inputfield (date).
Onvaluehelp for input field we were calling the saphelpdate function.
however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
we have upgraded to SPS 16 recently.
please help me.
regards,
Arvind.

Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
DATA: BEGIN OF T_PCONT OCCURS 0,
      PCONT LIKE ZPSPERMISOS-PSOBKEY,
END OF T_PCONT.
DATA: BEGIN OF T_FIELDS OCCURS 0.
        INCLUDE STRUCTURE help_value.
DATA END OF T_FIELDS.
DATA: BEGIN OF T_VALUES OCCURS 0,
      VALUE(60) TYPE c.
DATA: END OF T_VALUES.
DATA: N TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME TITLE text-b02.
SELECT-OPTIONS:
    P_CONT FOR ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_INT FOR ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_FEC FOR ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,
    P_RAZ FOR ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b20.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
PERFORM P_HELP_P_CONT USING P_CONT-LOW.
*&      Form P_HELP_P_CONT
FORM P_HELP_P_CONT USING P_P_CONT.
DESCRIBE TABLE T_PCONT LINES N.
IF N EQ 0.
    T_FIELDS-FIELDNAME = 'PSOBKEY'.
    T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
    T_FIELDS-SELECTFLAG = 'X'.
    APPEND T_FIELDS.
    CLEAR T_FIELDS.
    SELECT PSOBKEY FROM ZPSPERMISOS
    INTO TABLE T_PCONT.
    SORT T_PCONT BY PCONT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      CUCOL        = 10
      CUROW        = 1
      TABNAME      = 'T_PCONT'
      FIELDNAME    = 'PCONT'
    IMPORTING
      SELECT_VALUE = P_P_CONT
    TABLES
      FIELDS       = T_FIELDS
      VALUETAB     = T_VALUES.
ENDFORM.                    " P_HELP_P_CONT
Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

Screen sharing mobile account (open directory) not working

Can anybody else verify that screen sharing, through Remote Management, does not work when trying to connect to mobile accounts on 10.7 Lion?
Please note, when I say through Remote Management, I mean that under System Prefs->Sharing->Screen Sharing is disabled but Remote Management is enabled. (Remote Management being able to provide it's own screen sharing)
Also I dont mean VNC... please make sure the "VNC viewers may control my screen with password" option is turned off under System Prefs->Sharing->Remote Management->Computer Settings

I can confirm this. Same experience here on a 10.7.2 Mac.
I get a "Please verify you have entered the correct name and password".
Does this work on 10.6? I'm unable to check at the moment.

Get the value from dropdown list (selectedIndex) and text field -- not working

Hi All,
I am trying to find and change by the values selected by user using dropdown and text field. Here is the code.
ChangeRevDetails();
function ChangeRevDetails(){
          var myDialog = app.dialogs.add({name:"Enter copyright information"});
//    var monthlist = col1.dropdowns.add('myList', undefined, myList);
          var col1 = myDialog.dialogColumns.add();
          var col2 = myDialog.dialogColumns.add();
    col1.staticTexts.add({staticLabel:"Month:"});
          col1.staticTexts.add({staticLabel:"Year:"});
    col1.staticTexts.add({staticLabel:"Rev. no.:"});
    var myList = [ "January", "February", "March", "April", "March", "April", "May", "June", "July", "August", "Sepetember", "October", "November", "December" ];
     var myMonth = col2.dropdowns.add({stringList:myList, selectedIndex:0, minWidth:100});//{minWidth:100});
     var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100});
     var MyRev = col2.textEditboxes.add({minWidth:100});
    var RevMonth = (myList [myMonth.selectedIndex]);
    var RevYear = myYear.editContents;
    var RevNumber = MyRev.editContents;
    var RevToReplace1 = RevMonth +", "+ RevYear;
    var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber;
    var myResult = myDialog.show();
        if(myYear.editContents == "") //entry is ""
        alert("Please enter some text into the contents field.");
        ChangeRevDetails();
        else if(myResult == true) //user entered datas
            alert (RevMonth);
            alert (RevYear);
            alert (RevNumber);
            alert (RevToReplace1);
            alert (RevToReplace2);
            app.findGrepPreferences = NothingEnum.nothing;
            app.changeGrepPreferences = NothingEnum.nothing;
            // grep find/change
            app.findGrepPreferences = app.changeGrepPreferences = null;
            app.findGrepPreferences.findWhat = "[\\l\\u]+?\\s?\\d{4},?\\s+[\\l\\u]+\\.*\\s+\\d+";
            app.findGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
            app.changeGrepPreferences.changeTo = RevToReplace1;
            app.changeGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
            app.activeDocument.changeGrep();
            app.findGrepPreferences = NothingEnum.nothing;
            app.changeGrepPreferences = NothingEnum.nothing;
    else //implies user clicked cancel
    myDialog.destroy();
The problem is, it is not taking the value which the user selects from the dropdown and the text field. It takes the default value as "January" and the year is "2013" as both of these values are given as selectedIndex:0 and editContents:"2013". I have compared the coding with some other working scripts as well, but it is not working. I have added several alert boxes to check the value we get.
Also, the find and change is also not working. Please help me on this. Thanks.
Regards,
Muthuraj. D

Change the order for dialogresults:
var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100});
var MyRev = col2.textEditboxes.add({minWidth:100});
var myResult = myDialog.show();
if(myYear.editContents == "") //entry is ""
alert("Please enter some text into the contents field.");
ChangeRevDetails();
else if(myResult == true) //user entered datas
var RevMonth = (myList [myMonth.selectedIndex]);
var RevYear = myYear.editContents;
var RevNumber = MyRev.editContents;
var RevToReplace1 = RevMonth +", "+ RevYear;
var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber;
didn't have a look for the find change problem

ESS - Time Accounts- Exit button not working

We have implemented ESS Business Package, the Time Accounts application's Exit button is not working.
When we click on Exit, it is not doing anything. In Development env it is working fine, but when it comes to quality it is not working.
suggest me if we can solve this problem.

Hi Kiran,
We had a same problem with "Exit" button for "Benefits Enrollment" in both dev and quality systems. As a workaround we redirected to the specific iView using WDPortalNavigation.navigateAbsolute on clicking "Exit button".
Hope this helps.
Regards,
Adren

IDoc string field to JDBC date field - Not working

Hello everyone,
Once again I must ask you something that is keeping me..
I had a interface type RFC ASync to JDBC SQL Server, it was working fine. Then, I was asked to change to a type iDoc ASync to JDBC SQL Server.
At first, it was not a problem, just manual work. But them, I am getting an error.
In the RFC, I had a date field, that was directly related to the date field on the JDBC destination, so the mapping was pretty much straight forward. The SQL INSERT command was working fine on this cenario.
Now, in iDoc, this field was automatically converted to a string, and somehow, PI is not understanding that string has to be mapped to a date field in the JDBC.
Is there any 'workaround' for me to do this?
Thanks!
Ricardo Sancio Lóra
Brazil

The issue here is that somehow, the same SQL insert command that was working, does not work anymore.
This is the SQL command took from RWB log monitor:
INSERT INTO aniversariantes_sap (matricula, nome, nascimento, unidade) VALUES (00000070, 'Ricardo Lora', '19851216', 00000000)
If I run this query on my DB it works.
But, in PI, it's not, here is the error:
Could not execute statement for table/stored proc. "aniversariantes_sap" (structure "ANIVERSARIANTES_SAP") due to com.microsoft.sqlserver.jdbc.SQLServerException: Syntax error converting datetime from character string.
I´ve tried cast() and convert() using mapping 'habilities', but also, does not work. Work if I run in the DB, but not if PI runs it.
Wierd..
Ricardo

Photoshop color field not working in color picker

My color field is not working properly in my color picker. How do you fix this?
WRONG (what my color picking is doing) :
CORRECT (how it should work) :

The catchall first step in correction is to reset the tool which, in this case, is the Eyedropper.
With the Eyedropper chosen, right click here:
If that doesn't solve the problem, a logical next step would be to reset your Preferences.
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

Custom Field not working

Hi,
I've made a project level custom field in PWA that takes "Total Slack" (in-built duration field) and based on a switch formula gives out 3 values viz. High, Medium, Low The field formula is as mentioned below:
Switch([Total Slack] <= -7, "High", [Total Slack] >= 0, "Low", [Total Slack] > -7 And [Total Slack] <= -1, "Medium")
The formula works very well and displays value as High for projects with Total slack less than -7. However, the formula is not working for Total Slack between -7 and -1 i.e. greater than - 7 and less than -1. The formula returns the value as "High"
only.
I've tried editing and publishing the project both from PWA as well as Proj Professional after updating task duration to calculate Total Slack.
This field is critical and used in many views. I am looking for a solution to resolve this issue. Any help in this regard would be appreciated.

The next step then would be to move away from the SWITCH statement and use a nested if statement, along the lines of....
iif ([Total
Slack]/[Minutes
Per
Day]<=-7,"High",iif([Total
Slack]/[Minutes
Per
Day]<=-1,"Medium","Low"))
Please note that I haven't validated this formula as I don't have MSProject on this PC, but it should be good enough to take you forward.
Ben Howard [MVP] | web |
blog |
book | P2O

Account Detail field not working in FV50

Similar Messages

Maybe you are looking for