Account determination for entry ECCA WRX 0018 ZZ1 9126 not possible

Hi all,
I am getting this error while doing GR using MIGO. 
"Account determination for entry ECCA WRX 0018 ZZ1 9126 not possible"
There are 5 items in the PO and I get this error if I try to post all of them together. However if I try to post 1 item at a time, I am able to post all the materials individually.
I have checked the entry in OMWD, where valuation grouping code is maintained againt the valuation

Hi,
There are two confusions in your posting -
1)   At first, the error message has indicated that SAP has verified the G/L account with valuation class 9126 and therefore, blank valuation class was not taken into account;
2)   Secondly, if you can be able to post GR individually for each and very PO line item, then it has nothing to do with missing account assignment determination.
Are you pretty sure that you can post GR individually?.  Did you actually maintain the valuation class for all of your material IDs in material master?  If the answer for two questions is ''Yes'', then I would suggest you to debug your program to see why SAP has populated the error message only in case of GR for all material items.
Cheers,
HT

Similar Messages

  • Account determination for entry GIL ___ GIL ___ 6120 not possible

    Hi Friends,
    During GR using MIGO t-code I am getting the followin message.
    "Account determination for entry GIL ___ GIL ___ 6120 not possible"
    Here Transaction key and Account grouping code is not provided in error message.
    Actually, we have checked Purchase account Processing in t-code OBY6 after opening purchase order offset entries, you are getting this message, also this message is not occuring for all purchase orders and if we remove offset account entries check in OBY6, system allowing to make GR.
    Please suggest the solution for raised issue.
    KRaheja.

    Hi
    You marked delivery costs tab in IMG - MM - valuation and account assignment - Account Determination - Account Determination Without Wizard - Purchase Account Management - Calculation of Value for Purchase Account which will post delivery costs to price difference account?
    And also check the calculation schema - all the delivery conditions have account key as FRE and accruals as different transaction keys.
    Thanks

  • Account determination for entry INT GBB ____ ZOB 6300 not possible

    Guys
    I am an SD Consultant trying to do stock posting in MB1C.
    But when I try to save the document, system gave me " Account determination for entry INT GBB ____ ZOB 6300 not possible" message.
    I went to OBYC and added debit and credit GL Codes for GBBINTZOB+6300 combination and saved.
    But even after adding system giving the same message. Any one can help please?
    I double clicked the error message and clicked Proceed button it is taking me to the same screen but giving me a this message as well "Valuation grouping code was not defined for valuation area 5511".
    I do not know how to do stock posting. Please help.
    regards

    Hi,
    Simple solution for this is ,
    Just goto the transaction code OMS2 and select the MATERIAL TYPE for example as FERT and click on the QUANTITY /VALUE update in the control data tab and select your Valuation are which is nothing but the PLANT and uncheck the VALUE update field
    Now try posting this ( provided if you are practising)
    Else goto the Transaction code OMWB & OMWD and  give necessary settings for Valation area and valuation class for your material and in OBYC Maintain the GL accounts for the Valuation classes.
    Hope it will work
    Please revert back if you need further details
    thanks,
    santosh

  • Account determination for entry REL GBB 0001 STF THAA not possible

    Hi
    Please tell me how to resolve these type of quries.

    This is missing account determination configuration setting.
    (If you do a search on account determination or GBB in this forum, you will find many questions like your with great answers that will help you a lot)
    Transaction code OBYC
    GBB is the transaction for Offsetting entry for inventory posting This is what creates the integration between Materials Management and Financial Accounting. The combination of Valuation modifier (in simple terms your valuation area could be Plant or Company Code) ; General Modification (probably your REL; Valuation Class (look in Accounting View of Material Master in MM03) and the GL Account to be Debited and Credited.
    Hope this Helps
    Siva

  • Account determination for entry 1000 GBB 0001 VKA 7920 not possible

    Hi,
    We are getting this error while using the Movement Type 411 E.
    We know that by maintaing the respective G/L Accounts (OBYC) we can correct error.
    My doubts are:
    1.     why this error is coming, mean why the Sysyem is passing the FI Entry while posting the transaction thru 411 E. Is this SAP Standard?
    2.     what type of G/L we should ask for from the FI Team.
    Please guide.
    Regards,

    Thanks Raman for the reply.
    My doubts are:
    1. why this error is coming, mean why the Sysyem is passing the FI Entry while posting the transaction thru 411 E. Is this SAP Standard?
    2. what type of G/L we should ask for from the FI Team.
    The problem with me is that the FI guy is saying that there is problem in my MM transaction. He is of the view that there should not be any FI entry at the time of 411 E.
    I just want to know the root cause of this error so that I can convince my FI guy.
    Hope u understand my problem.
    Regards,

  • Reg.Account determination for entry NHCA GBB ____ ___ 3003 not possible

    Dear Experts
    Still No one help me, My problem is , automatic posting is not working, that is even no one G/L isl assigned during po creation and goods movement. we cann't find what is the problem,definitly we can say it is from SD and FI side, Pls help me, All my MM related postings are correct,I checked many times, Pls help me. (New company and chart of account has been created)
    Thanks in advance
    Rajakumar.K

    Hi ,
    I think your posting key is not assigned . Assign 81 to debit and 91 to credit through OBYC-GBB-Posting key
    After this Click on rules and check the four checkbox ( debit.credit,general modifier , val. mod, val. class).
    Please check in the drop down menu or transaction ob41 whether 81 & 91 exists or not.As these are standard posting keys.
    If not try to check with your FI team whether they are using any customised posting keys and tell them to assign this.
    Normally the settings you are making right now must be done with the coordination of FI team only in order to avoid any discrepencies in the future.
    Regards,
    Anupam
    Edited by: Anupam Halder on Jul 21, 2009 12:40 PM

  • M8 147 Account determination for entry PKJL WRX 0001 not possible.

    Hello !
    I am using ML81N transaction - Service Entry Sheet. PKJL is Chart of accounts.
    I know how to solve this error problem. In transaction OBYC I have to input record for WRX with empty valuation class.
    But using this solution I limit to only one clearing account for services.
    Is it possible to configure SAP system in that way to input severals records (in OBYC for WRX):
    Valuation modif:  Valuation class:   Account:
    0001                     5000                     3010100 - Transport Services
    0001                     5001                     3010101 - IT Services
    0001                     5002                     3010102 - Bank Services
    Every service in master data (transaction AC03) has conected valuation class and material group.
    Every material group (in transaction OMQW) has conected valuation class.
    Every line in purchase order has inputed correct material group.
    Nevertheless SAP system looks for record with empty valuation class.
    Is it an SAP limitation or SAP error or I don't make all configurations?
    Best regards
    Bogdan

    Hello!
    It is bad news but thank You for help.
    Best regards
    Bogdan

  • Error msg in MIGO: Account determination for entry not possible

    hello when i am doing a goods movement, i get the message Account determination for entry DART WRX DFGX ___ 3200 not possible.

    Dear,
    check one moresettings VC/Plant assigned to Valuation grouping code through T.code OMWD.
    Regards,
    Kishore K

  • Reverse GR error:Account determination for entry GCOA...not possible

    Hi!
    If we encounter the error Account determination for entry GCOA PRD 0002 ___ ZRO1 not possible when reversing GR,  does this have something to do with the number of available stocks of the materials?
    In our other servers, the transaction key PRD is blank.  but we ca reverse GRs.. but in our production server, PRD is also blank but we cannot reverse the GR.  The error Account determination for entry GCOA PRD 0002 ___ ZRO1 not possible   comes up.
    What could be the reason for this?
    Appreciate your help..thanks so much!
    Regards,
    Paula

    Please specify below:
    1. what's the price control for problem material? S or V? And what's the price unit? 
    Price control is V, price unit is PC
    There is no change in PO price.. the price is 40.
    2. what's the movement type for the material document posted? What's the quantity
    in the material document?
    mvt type in GR is 101.. PO qty is 3996 pc and GR qty is 3996 pc.
    3. what's the accounting doucment posted during the goods movement. Please list all the lines
    in FI document with transaction key information(BSX/WRX...)
    89 - BSX
    96- WRX
    4. what's the current stock/stock value for the problem material, i.e. the stock/stock value before
    posting the GR reversal?
    current stock is 6,383.000 pc
    GR reversal has not been done yet...
    Thanks so much for your time..
    Regards,
    Paula

  • Message no. M8147 : - Account determination for entry TLRG KDM not possible

    Dear Friends,
    We encounter with error message M8147:-Account determination for entry TLRG KDM not possible while posting a MIRO entry, here is the brief analysis.
           Goods receipts is posted the following entry with exchange rate 3.81650
                         RM-Paper A/c                 USD 31075.24 and ARS 118598.67
                               GR/IR Clearing           USD 31075.24 and ARS 118598.67
    Now while posting MIRO exchange rate is 3.8863, as there is difference exists with GR rate system is trying to identy GL account from transaction key KDM (Materials management exch.rate diffs) but we have not mantained any account there.
    Now what I want to understand is that I have seen the cases when there is a exchange rate difference it will be adjusted to Expense A/c in this case it should be RM-Paper A/c but why system is looking for an entry to KDM transaction key.
    Please give us an idea why system is behaving is like this and how to achive the funtionality of adjusting the exchange rate difference to expense A/c.

    hi all,
    I am also facing this error
    Account determination for entry ____ GBB ____ BSA 7900 not possible .
    The system cannot find account for posting. OBYC i have checked but not getting any solution. Can you suggest something?
    Regards,
    Diptanshu gupta

  • Account determination for entry 1000 AUM

    Hello Everybody,
    While doing the stock transfer (MB1B) from unrestricted stock to sales order stock  system is giving the below error.
    "Account determination for entry 1000 AUM 1000 ___ 3100 not possible
        Message no. M8147
    Diagnosis
        The system did not find an account for this transaction. This means that
        the account determination for key 1000 AUM 1000 ___ 3100 is not
        maintained in MM Customizing (Valuation). The key is made up of:
        o   Chart of account
        o   Transaction key (= Posting transaction)
        o   Valuation grouping code
        o   Account grouping code
        o   Valuation class
    System Response
        The system cannot update a G/L account for this transaction. You cannot
        post the transaction."
    *The total quantity of the Material is 600.but if i transfer up to 599 qty system is not giving any error.for 1 qty only its asking    AUM assignment.*
    **why system is behaving like this..? where its finding the price difference...?
       Please help me..
    Regards,
    Srinivas Putty
    Edited by: srinu putty on Apr 21, 2010 7:44 AM

    hi
    goto OBYC here dbl click on AUM and then here give the accounts for the valuation class 3100
    SAP help for understanding AUM
    Expenditure/income from transfer posting (AUM)
    This transaction is used for transfer postings from one material to another if the complete value of the issuing material cannot be
    posted to the value of the receiving material. This applies both to materials with standard price control and to materials with moving average price control. Price differences can arise for materials with moving average price if stock levels are negative and the stock value becomes unrealistic as a result of the posting. Transaction AUM can be used irrespective of whether the transfer posting involves a transfer between plants. The expenditure/income is added to the receiving material.
    regards
    kunal

  • RC=     3  M8                   147 Account determination for entry 1000 ?

    Dear All,
    We have the following scenarios.
    1) we procure raw material
    2) we procure services
    while procuring the rawmaterial system is posting entries to
    inventory a/c dr
    gr/ir cr
    while procuring the services its giving the following error.
    RC=     3  M8                   147 Account determination for entry 1000 WRX 0001 not possible.
    in OBYC --> WRX --> we assigned both 1) GR/IR account 2) SR/IR Account ( with blank field of valuation class)
    still we are getting the above error.
    But when we delete gr/ir account & assign only sr/ir account with blank field of valuation class its posting to sr/ir account.
    how to overcome this problem,in which we need to procure both services as well as inventory.
    some body please guide us.
    regards,
    shashi kanth.

    Check note 97025 or 195511
    thanks
    G. Lakshmipathi

  • Account determined for entry (chart of accounts no) WRX 0003 not possible

    HI, I'm trying to GR a PO for a material using movement type 101 and am getting the following error
    "Account determined for entry (chart of accounts no) WRX 0003 not possible"
    I know that I need to go to OBYC to make an entry for transaction WRX for valuation group code 0003 and valuation class and then assign it to the relevant gl. 
    My problem is I don't know what the valuation class should be.  In the PO there is short text entered for the item rather than a material number so I cannot go to the material master to check what valuation class is assigned.  Is it linked anywhere to the material group?
    Thanks in advance for your help

    yes u can do
    fist
    u can make the entry and blank valuation class and give the gl account in wrx
    so that it will take this GL account for blank materia number
    or
    u cna give valuation class to material group
    MM  purchasing -- materal master -- Entry Aids for Items Without a Material Master
    hope this helps

  • "Account determination for entry CHFS BSX 37AP not possible" -goods receipt

    I have a student using ECC 6.0 getting the following message when posting a goods receipt for a purchase order:
    "Account determination for entry CHFS BSX 37AP not possible"
    This is in the Fitter Snacker configuration phase 2 client, but now doing the configuration for the Marshall Muffler Company case. No other student has this message. I have checked everything that I can think of -- company, plant, purchasing organization, G/L account numbers, vendors, materials, quanity and value updating, valuation grouping code, automatic postings for inventory posting (BSX), controlling area, .. but cannot find anything amiss.
    Can anyone help with this? We are client 625 on the moscow server at Chico. The student is user 625-037, using 37 as a prefix for the various components e.g. company code 37MM. One PO for exampe is 4500000116. The student has created a number of orders trying to get it to work. Strangely, the student did get one raw material received on one PO for a vendor earlier, but now cannot do so.

    1st thing to do is understand the error message format.  - comp. code - transac - valuation class.  so you need to tackle BSX part. 
    goto transaction code OMS2 make sure the Mtype for Raw materials (RM) , Semifinished (SP) and Finished (FP) is selected for Quantity / Value updating tick box.  You can check this by going clicking Quantity/valur updating on left  hand panel.
    then goto transaction code OBYC for BSX transaction , make sure your plant it is assign to the correct valuation classs 3000. save everything.
    now try goto transaction code MIGO to cerate the GR again.   Normally if you don't maintain the BSX properly, you bond to have similiar error for WRX.   so please make sure that is also taken care off.    
    Now you should be fine creating the GR.  Good luck.

  • Account determination for entry CASI DIF not possible.

    Hi Friends,
    While doing Invoice (MIRO) against PO, I have encountered below error.
    IR Error:
    Account determination for entry CASI DIF not possible. 
    Please help to how to resolve.
    Warm regds,
    Raman,

    Hi,
    If you click on the message you will get help, it will show you exactly which entry in the auto account assignment table is missing. Note the details (COA valuation area etc.) then at the bottom of the message is a link to take you into the transaction where you can make the appropriate settings (assuming that you have access and this is not your production live system).
    CASI may well be yyour chart of accounts and DIF is the transaction event key. The system needs to know which GL to post to in this situation.
    Steve B

Maybe you are looking for