Account generation workflow custom process not visible in lov

Hi guru,
i have created a sample process in "Project Supplier Invoice Account Generation".
but when i upload the work flow in data base by the concurrent program . i dont find the sample process in " account generation window" in GL.
Please help gurus.
Regards
vishal

Hi,
See the foll notes for solution:
Note 541877 - CUF: Customer fields as checkbox
Note 1016297 - Header customer fields are not displayed in bbpsc02
Note 1034079 - Customer fields not visible in shopping wizard
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

No account assignment to customer order (not active in COArea 3361, yr 2010

Hi everybody,
When I am doing Individual PO with below settings
1. create an material NO with type FERT and item category BANC ;
2. create a sales order via VA01;
3. create an PO via ME21N with ref to PR;
4. but system return an error
message like this :
No account assignment to customer order (not active in COArea 3361,
year 2010).
Messageno. KI 162
Diagnosis
You posted a customer order even though sales orders is not active in
controlling area 3361, fiscal year 2010.
System Response
The posting is invalid.
Procedure
Activate sales orders in CO configuration for fiscal year 2010.
To use production to order without updating to CO, you can deactivate
this error message. The work area is KI,message number 162.
How can I do with it ?
Thanks,
Nagesh

Hi Karthik,
                 Thanks a lot for ur inputs , I checked whatever ur mentioned but till now it has not salvoed. what i absorbed is controlling area is not copying into PO when i am doing with ref to PR.in PO item level account assignment tab G/L a/c is 892000 and Controlling area is Blank and it is in Gray mode.
                                         when i was doing the 3rd party sales order, same with ref to PR ,in PO controlling area is coming automatically.
Pls let me know if u have any idea about this.
    Thanks in advance.
Regards,
Nagesh N
9030299571

Need Help: Workflow Decision Task not visible in NWBC for customer Task

Hello All,
I am new to NWBC configuration , need ur expert knowledge for the below issue. I have checked the treat . Approve/Reject button for SRM Approval for RFx response ,but not able to get the exact steps for the configurations in NWBC.
Requirement.
     We are working on SLM/SRM module, where we have requirement to create a custom workflow with custom Task for which we have executed below actions.
Created the Custom Workflow.
Created the custom Task with custom ZCLASS and ZEVET.
Created   Event linkages in SWE2.
After doing this we are getting the workitem in the NWBC, currently we don’t have the Portal system in place, so we are using the NWBC for all our testing.
What is the issue?
     When we select the workitem in the NWBC (UML) inbox , the Decision Task ie “Approve” or “Reject” button are not visible , where as for SAP standard Task buttons are visible.
What help we need?
When we cross check the SCN/IBM portal, found that we need to do the XML file configurations. Can you any one kindly let us know the steps we need to follow to achieve our functionality.
Thanks a lot in advance.
Thanks and Regards
Channa

You need to share the details of what Inbox you are using, configuration steps depend on it. If you aren't using portal, you aren't using UWL and there is no UML inbox. You need to get your facts straight. Most likely you are using the Business Workflow Inbox (SWF_WORKPLACE) or the Lean Inbox (IBO_WDA_INBOX). Both are based on Web Dynpro ABAP and POWL but the configuration is different. Regardless, you posted this in the wrong space. Correct space is either SAP NetWeaver Business Client or Web Dynpro ABAP.

Custom fields not visible in the Active Subject Area column

Hello,
I have created several custom fields in the Object Service Request. I need to create a report with those fields, but some of them are not visible / displayed.
Is there any delay between the custom field creation and its availability in Oracle Answer? Because, only the "old" custom fields appears in the list.
Thanks in advance for your advices.
Laurent

it generally takes one day to appear in analytics

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

Some workflow Mail items not visible in SCOT in QA but there in Development

Hi,
In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
Regards,
Arcahna

Hi,
In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
Regards,
Arcahna

Custom subtype not visible in ESS benefits

Hi Experts,
in erp2005, i created a custom subtype 9B for IT0021 (family members). defined a use case to maintain records through ESS personal information workset. so, a new button with name beneficiaries is seen on portal. however, these beneficiaries are not visible when employee wants to add them in the benefits plans as a beneficiary in certain plans. in the backend system, they are visible however. they can be added to a plan.
thanks for reading, i appreciate your help.

Kumarpal,
did you check this thread
https://forums.sdn.sap.com/click.jspa?searchID=17218337&messageID=6299502
Thanks
Bala Duvvuri

Custom View not visible in Overview page as AB unless "Reset to Default"

Hi Experts,
I am facing a strange issue here.
I enhanced the component TPMOE and created a custom view ZTRADESPENDEXCEPTION in it.
Now i have added this view as assignment block in all 6 configuration available for the overview page.
I have redefined the DETACH_STATIC_OVW_VIEWS and REATTACH_STATIC_OVW_VIEWS.
The issue i am facing is that my view assignment block is not visible to the user unless he/she goes to the personalization of the overview page and hits "Reset to Default". Once this is done, later on users can change there personalizations and everything works fine.
Now i am not sure i can go and tell all end users to go to personalization of the TPMOE overview page and click on "Reset to Default".
Is there any other way i can show my view to the end users?
I have done this on the lines of overview page layout changing when you select product planning basis while creating Trade Promotions.
Thanks and Regards
Gaurav Kumar Raghav

Hi Amar,
My coding is given below.
In DETACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_view_id
In REATTACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
if <flag> = 'X'.
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_return.
endif.
In debug mode, the coding get executed correctly and my view is returned for attachement.
For each user, the first time, i need to say "Reset to Default".
After that it works fine, my view is displayed.
Is the program "BSP_DLC_DELETE_PERSONALIZATION" a good solution to my problem?
Thanks and Regards
Gaurav Kumar Raghav

Custom field not visible for Project task in PPM 5.0

Hi,
I have done the SPRO configuration required to add a custom field in Project task
1. Enhance DB table. added the field in structure DPR_TS_TASK_EXTENDED_ATTR, object type TTO
2. Define field groups for custom fields
3. Set up field control.
The custom field tab has come after making SPRO changes. But the field is not visible on the tab.
Please let me know if I am missing any steps.
Thanks,
Yomesh

Dear Yomesh;
You have to config the view or subview at:
SAP Portfolio and Project Management -> Portfolio Management -> Global Customizing -> Global Field Settings -> Assign Fields to Views/Subviews
Here try to to setup the view that you want to see the custom field.
Hope you help you.
Regards.
Mariano

OTL Custom Formula not visible in Time Entry Rule window

Hi Friends,
I have created a custom Fast Formula of type 'OTL Time Entry Rules'. Created a context with segments for the OTL Formulas Flex Field with formula name same as of the context. But the formula is not visible in the in the time entry rule window.
Can any one please suggest what is the reason for this?
Many many thanks in advance.

Hi,
Check whether you have given the description for your custom Fast formula while defining the FF in the Write Formula screen.
Coz, In the Time Entry rules window you will see the description of the fast formula .
Though the description iss not a mandatory field while defining the FF in the Write Formula screen the time entry rule will take only the description of the FF instead of the FF Name.
Get beack to me if you need further info.
Thanks,
Anuradha

Customized fields Not visible in GUI but visible in PCUI why

Hi,
Can anybody help me, i have a problem which is as followes,
I Enhanced Three fields for Campign in CRM Throw EEWB, these three fields are not appearing in GUI but its appearing in PCUI.
Can some body can give me valueble inputs to solve this issue.
Thanks & Regards,
Sivakumar.

Hi Suyash
In the TS, on the right side, see if these fields are part of the DS.
If yes, then click on them and drop them on the left, in the Transfer structure.
If they are not availabel in the Datasource, then go to RSA6 in R/3 and see if the extract structure of this DS has these fields hidden, i.e if theres a check mark on hide coloumn....
If these fields are not visible in the extract structure then let me know
Regards
Prakash
Assigning points on SDN is a way of saying thanks !!

Requisition change order workflow - custom wf not being picked

Oracle Standard Requisition change order workflow doesnt meet the client requirement.
so we had to customize the poreqcha workflow.
Steps
1. Changed poreqcha.wft and complied using another name.
2. Associated the workflow in document types. ( Purchasing Super user>>setup>>purchasing>>document types)
Attached the new item-type to "Change Order Request Requisition"
3. Create a req approve it, auto create a PO and approve it. Now log in as requester and change the requisition
It still follows the standard workflow and not the custom workflow.
Please assist is there are any settings which i'm missing.

See "How to Change the Top-Level Process for the POREQCHA - Requestor Change Order Approval? [ID 423078.1]" for Oracle's opinion on this. We have modified the top-level process directly. Neither solution is ideal.
Thanks,
Nic

Custom process not opening anymore

Hello,
Suddently while working (designing) with Livecycle Process, my process sent an error an error and deactivated itself. Now, when I try to open it I get this error:
Unable to create this part due to an internal error. Reason for the failure: An exception was thrown during initialization
java.lang.NullPointerException
at com.adobe.workflow.template.document.DefaultPoolTemplate.createPool(DefaultPoolTemplate.j ava:244)
at com.adobe.workflow.template.document.DefaultPoolTemplate.<init>(DefaultPoolTemplate.java: 110)
Is there any way to recover the process? The process is also not listed in the process list in adminui.
Thank you

Can you try to create a new version of your process from the corrupted version and see it that fixes it.
Jasmin

IProc, PR Account Generation workflow customization

Hi All,
We are in R11.5.10.2 and we are implementing Tax for our client.
End user wants to default the segment6 of charge account with the segment6 of tax_code code combination. I've tried to default the account using the package por_custom_pkg but the same is not working. And I found a note in Support site saying the package is not defaulting the values and move the customization to workflow.
I've no experience in workflow and pls show me a way out of this..
Thanks
Sandy

Hi Malla,
Solution here:
http://garethroberts.blogspot.com/2007/08/gl-account-code-combinations-on-fly-key.html
Regards,
Gareth

PR Account Generation workflow customization

Hi All,
We are in R11.5.10.2 and we are implementing Tax for our client.
When creating PR from iProc end user wants to default the segment6 of charge account with the segment6 of tax_code code combination. I've tried to default the account using the package por_custom_pkg but the same is not working. And I found a note in Support site saying the package is not defaulting the values and we've to move the customization to workflow.
I've no experience in workflow, pls show me a way out of this.
Thanks

This question may fit perfectly into Oracle Inventory forum rather than Oracle Workflow.

Account generation workflow custom process not visible in lov

Similar Messages

Maybe you are looking for