Account has forgotten history after password recovery
Hi all,
I mistyped my password a couple of times on my iPhone today and had to go through iTunes to recover/reset it.
Then I went to update my iPhone app "Saisuke" But I was told only existing purchasers could get the Update !
I have had my account for several months and have bought a number of apps for my iPhone.
I cannot find anywhere to report a problem as my account through iTunes shows nu purchase history. I even have all of my receipt emails where I purchased them
What can I do ?
Thanks !
Howard
You can email Customer Services using the form at this link: iTMS Customer Service
Similar Messages
-
Elitebook 8530 sparekey problem after password recovery
Hi,
I'm a bit panicking - but will try to make this lucid.
I very much hope you guys can help..
It's the continuation of a problem I asked yesterday somewhere else.
http://forums.techguy.org/windows-vista/1133738-check-after-password-recovery.html
Basic system information:
EliteBook 8530; runs on Vista Business. More details about system in above thread
But for a short run-down:
- Yesterday my user-password was not accepted.
- Still had admin-access via fingerprints
- Ran Malbytes anti-malware and AVG anti-virus - neither found much of anything.
- Made new admin account, used that to reset my password.
- Posted the above-mentioned topic whether someone could check for malicious processes.
- Yesterday evening shut down the computer as normal
- This morning it mentioned that recently a password had been reset [with some location I didn't know. Had my name in it twice, so perhaps root-password or something?
- Only option was to click 'OK' and enter HP Sparekey.
- Currently I have the following message: Some users have not enrolled for HP SpareKey recovery. Do you want to enroll now? Answer-options: Yes; No; Do not show again.
I don't know the implications or effects of any of them - so haven't done anything yet.
Note: I don't think any of the accounts have HP SpareKey enrolled. I have never seen about it previously.
However, I got my laptop via an university-program, so the operating systems etc. had been preinstalled.
It might be possible they installed ShareKey for the initial account - but I think I would've heard of that.
So please someone help me - I really don't know what to do..
This question was solved.
View Solution.Hey guys,
I don't want to hurry you or anything - but I could really need some advice here
Or should I be in a difference forum part; like http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-ZBook/bd-p/bsc-274 or http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.VBnV4lJIg1g
because it's an issue with an EliteBook?
Or don't you guys really know this particular problem either - and therefore can't advice?.. -
My wife has forgotten her Windows Password
First in case the Serial Number is required it is[edited Serial Number by Moderator]
My wife brought her Compaq Presario CQ-60 to the UK from her home in the USA a year ago but has not needed to use it.
Consequently she has forgotten her Windows Password and even the "Reminder Word" just won't jar her memory !!
Is there any default password that would enable her to access it and then choose a fresh password.
Many thanks
Derek Andrews
Northampton UKHi,
You're welcome
The 8 digit code you refer will be related to a power on password - ( if set, this will appear almost immediately after the power button is pressed and required before the operating system will even begin to load ) - it is not applicable for a Windows log-on password.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
My daughter has forgotten her iPad password, how do i reset it?
My daughter has forgotten her iPad password, how do i reset it?
You can't reset a passcode. you have to restore the device and you want to sync to the computer that you always sync with if you want to restore all of the data and setting. If that computer is unavailable - you can use another computer - but you will have to erase the iPad completely and will not be able to recover your data.
See this for "how to restore"
You may have to restore using recovery mode -
what if someone has forgotten icloud id password and email id with which one signed in an iphone
Find your AppleId: http://support.apple.com/kb/HT5625?viewlocale=en_US&locale=en_US
https://iforgot.apple.com/appleid
how to reset password:
https://iforgot.apple.com/password/verify/appleid -
my credit card expired so my iCloud storage was deactivated. I updated my credit card and now it not only wont let me purchase more storage, but says my account has been deactivated. help, please!
Hi mamamuddpie,
If your Apple ID account has been disabled, follow the steps below to reset your password and gain access. There is a link in the article to the Apple ID Security team if you need help with this.
If your Apple ID has been locked - Apple Support
http://support.apple.com/en-us/HT204106
You might see one of these alerts:
“This Apple ID has been disabled for security reasons”
"You can't sign in because your account was disabled for security reasons"
"This Apple ID has been locked for security reasons"
If your Apple ID was locked, you can go to iForgot to unlock it with your existing password or reset your password. You can also click the Reset Password or Forgot Password button in the alert. Remember to type your full email address when you're asked to enter your Apple ID. For example, [email protected] or [email protected]. If you use two-step verification for Apple ID, you need to use your recovery key and a trusted device to regain access to your account.
If you can't reset your password and you don't use two-step verification, contact Apple Support. Update your password in iCloud settings
After you change your password, you might need to update it in iCloud settings on your devices.
iPhone, iPad, or iPod touch
Go to Settings > iCloud.
Tap Edit, if asked.
Type your new password and tap Done.
Mac
Go to Apple menu > System Preferences.
Click iCloud.
Click Sign Out.
Type your new password and click Sign In.
Windows
Choose Start > Control Panel.
Double-click iCloud.
Click Sign Out.
Type your new password and click Sign In.
Email
If you use an email app to get iCloud email, the app will ask you to enter your new password when you check for mail. If OS X Mail doesn't ask you for your password, check your Mail preferences. For any other mail app, check the app's documentation to get help changing your email password.Update other services, such as iTunes and FaceTime
If you use your Apple ID in the iTunes Store, App Store, iBooks Store, iMessage, Game Center, or FaceTime, you might need to update your password for those services.
iPhone, iPad, or iPod touch
Go to Settings and tap the service.
Tap your Apple ID. For iMessage, tap Send & Receive and then tap your Apple ID.
Tap Sign Out.
Sign in with your Apple ID and your new password.
Mac or PC
If you try to sign in to the iTunes Store or Mac App Store, make a purchase, or update an app, you'll be asked to enter your password.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Dec 17, 2014
When you are able to access your account again, check to make sure your billing information has been updated.
Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
http://support.apple.com/en-us/HT201266
I hope this information helps ....
- Judy -
AD account getting locked out after password change in Jabber
When user changes his network credentials and does not update them in Jabber. Jabber will still try to connect to phone services and voicemail with the old credentials which is leading to their account getting locked in AD after three attempts.
We are using Jabber 9.6.1, so a fairly new version.
Can some suggest if there is a workaround?Hi,
We are seeing a similar issue after the user has changed their AD password the account repeatedly gets locked out when they try to log into Jabber.
We are also using Cisco IM&P and our CUCM is LDAP synced
I am interested to know why you are asking if LDAP authentication is configured?
Regards,
Andries -
6509 - 720 Supervisor Module Failure after Password Recovery
Hi,
I attempted to perform a password recovery on a 6509 with dual WS-SUP720-3B modules running 12.2(33)SXI2A.
After changing the configuration register to 0x2142 and booting, I am getting a major error on the supervisor modules. I've changed the configuration register back to 0x2102 and am still getting the same error on both supervisor modules. I've also tried it with one module removed and one module installed.
I have about 30 seconds in where I can run commands before I get booted to rommon.
Any thoughts?
See below for the console output:
System Bootstrap, Version 8.5(3)
Copyright (c) 1994-2008 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
Autoboot executing command: "boot bootdisk:"
Initializing ATA monitor library...
string is bootdisk:s72033-ipservicesk9-mz.122-33.SXI2a.bin
Loading image, please wait ...
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ################################################################################################################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x4224F120
*Apr 19 05:03:02.747: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Apr 19 05:03:01.515: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch
Firmware compiled 19-May-09 12:08 by apyu Build [25600]
*Apr 19 05:03:02.747: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 524288 Kbytes of main memory
Download Start
Download Completed! Booting the image.
Self decompressing the image : ############################################################################################################################################################################################################################################################################################################################ [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x43A51E70
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C6509-E (R7000) processor (revision 1.5) with 458720K/65536K bytes of memory.
Processor board ID SMC133600GT
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 Virtual Ethernet interface
194 Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
*Apr 19 04:55:51.335: RP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:52.107: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:56:00.531: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c)
Router> 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
*Apr 19 05:03:03.111: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Apr 19 04:55:46.739: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:55:46.747: SP: SP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:47.483: %SCHED-SP-7-WAen
Router#TCH: Attempt to set uninitialized watched boolean (address 0). -Process= "<interrupt level>", ipl= 1, pid= 3
-Traceback= 408E0820 40D74FEC 40D4B31C 40D4A1A8 40D46448 40F604B8 4173CCDC
*Apr 19 04:55:59.607: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Router#
Router#Apr 19 04:56:00.591: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Apr 19 04:56:00.695: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Apr 19 04:56:00.943: %OIR-SP-6-INSPS: Power supply inserted in slot 2
Router#
Router#
Router#
*Apr 19 04:56:08.099: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
*Apr 19 04:56:08.195: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
Router#
Router#
Router#
*Apr 19 04:56:09.567: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
Router#
Router#
Router#
Router#show diagnostic result
% Incomplete command.
Router#show diagnostic result ?
module Module Keyword
Router#show diagnostic result ,modu modjle ule 5
Current bootup diagnostic level: minimal
Module 5: Supervisor Engine 720 (Active) SerialNo : SAL1338YTZ0
Overall Diagnostic Result for Module 5 : UNTESTED
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) TestScratchRegister -------------> U
2) TestSPRPInbandPing --------------> U
3) TestTransceiverIntegrity:
Port 1 2
U U
4) TestActiveToStandbyLoopback:
Port 1 2
--More-- U U
5) TestLoopback:
Port 1 2
6) TestNewIndexLearn ---------------> .
7) TestDontConditionalLearn --------> .
8) TestBadBpduTrap -----------------> .
9) TestMatchCapture ----------------> .
10) TestProtocolMatchChannel --------> .
11) TestFibDevices ------------------> F
12) TestIPv4FibShortcut -------------> F
13) TestL3Capture2 ------------------> F
14) TestIPv6FibShortcut -------------> F
15) TestMPLSFibShortcut -------------> F
16) TestNATFibShortcut --------------> F
17) TestAclPermit -------------------> F
18) TestAclDeny ---------------------> U
--More-- 19) TestQoSTcam ---------------------> U
20) TestL3VlanMet -------------------> U
21) TestIngressSpan -----------------> U
22) TestEgressSpan ------------------> U
23) TestNetflowInlineRewrite:
Port 1 2
U U
24) TestFabricSnakeForward ----------> U
25) TestFabricSnakeBackward ---------> U
26) TestTrafficStress ---------------> U
27) TestFibTcamSSRAM ----------------> U
28) TestAsicMemory ------------------> U
29) TestAclQosTcam ------------------> U
30) TestNetflowTcam -----------------> U
31) ScheduleSwitchover --------------> U
32) TestFirmwareDiagStatus ----------> U
33) TestAsicSync --------------------> U
34) TestUnusedPortLoopback:
--More--
Router#[Ashow diagnostic result module 5
Current bootup diagnostic level: minimal
Module 5: Supervisor Engine 720 (Active) SerialNo : SAL1338YTZ0
Overall Diagnostic Result for Module 5 : UNTESTED
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) TestScratchRegister -------------> U
2) TestSPRPInbandPing --------------> U
3) TestTransceiverIntegrity:
Port 1 2
U U
4) TestActiveToStandbyLoopback:
Port 1 2
--More--
Router#
*Apr 19 04:56:29.637: %DIAG-SP-3-MAJOR: M
%Software-forced reload
04:56:30 UTC Sun Apr 19 2015: Breakpoint exception, CPU signal 23, PC = 0x42735338
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
-Traceback= 42735338 42732E8C 423A6220 423A624C 421C1388 4223F614 4223F670 40962164 40963034 40962F54 40963D28 423259D0 42319604 42319820 42727FEC
$0 : 00000000, AT : 43FE0000, v0 : 45870000, v1 : 00000200
a0 : 46DC99C0, a1 : 44E05758, a2 : 00000000, a3 : 00000040
t0 : 00000010, t1 : 3400F101, t2 : 3400F100, t3 : FFFF00FF
t4 : 42728608, t5 : 00002F04, t6 : 80000000, t7 : 00000000
s0 : 00000000, s1 : 43EE0000, s2 : 50449158, s3 : 0000001F
s4 : 50449158, s5 : 470B3AB4, s6 : 00000000, s7 : 08A5DFC8
t8 : 08028FEC, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 43FDDE8C, sp : 5000DBB0, s8 : 00000000, ra : 42732E8C
EPC : 42735338, ErrorEPC : 870FDDF0, SREG : 3400F103
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
DATA_START : 0x43A51E70
Cause 00000824 (Code 0x9): Breakpoint exception
Writing crashinfo to bootflash:crashinfo_20150419-045630
=== Flushing messages (04:56:30 UTC Sun Apr 19 2015) ===
Buffered messages:
*Apr 19 04:55:51.335: RP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:52.107: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:56:00.531: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
*Apr 19 05:03:03.111: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Apr 19 04:55:46.739: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:55:46.747: SP: SP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:47.483: %SCHED-SP-7-WATCH: Attempt to set uninitialized watched boolean (address 0). -Process= "<interrupt level>", ipl= 1, pid= 3
-Traceback= 408E0820 40D74FEC 40D4B31C 40D4A1A8 40D46448 40F604B8 4173CCDC
*Apr 19 04:55:59.607: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
*Apr 19 04:56:00.591: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Apr 19 04:56:00.695: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Apr 19 04:56:00.943: %OIR-SP-6-INSPS: Power supply inserted in slot 2
*Apr 19 04:56:08.099: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
*Apr 19 04:56:08.195: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
*Apr 19 04:56:09.567: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
*Apr 19 04:56:29.637: %DIAG-SP-3-MAJOR: Module 5: Online Diagnostics detected a Major Error. Please use 'show diagnostic result <target>' to see test results.
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestFibDevices failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestIPv4FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestL3Capture2 failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestIPv6FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestMPLSFibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestNATFibShortcut failed
Queued messages:
*Apr 19 04:56:33.583: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
IPv6FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestMPLSFibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestNATFibShortcut failed
*Apr 19 04:56:29.971: %HA_EM-6-LOG: Mandatory.go_bootup.tcl: GOLD EEM TCL policy for boot up diagnostic
*Apr 19 04:56:30.575: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to exception , reset by [5/0]
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x45876f54
PC = 0x42728664, SP = 0x43ed9cd8, RA = 0x413ad2f4
Cause Reg = 0x00003820, Status Reg = 0x34008002
rommon 1 >What kind of line card was being inserted in slot 6? Have you tried other slots? The crash file in the RP says it was reset by SP, so the important crashinfo file would be in the sup-bootflash: Try an see if you find any "dir sup-bootflash:"
Aug 5 17:46:11: %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP
%Software-forced reload
To answer your question:
A Is there any different procedure to install line modules in supervisor slots?
>>No there are no special configuration you need to do when inserting a line card in slots that normally would be for supervisor.
B Switch is having previously removed linecard (i.e, fastethernet module)in running configuration. Will it create any system crash?
>>No, it will not cause the switch to crash, when you see the configuration of a line card even after it was removed is quite normal, it's cold module provisionsing, you would not want to keep putting in a configuration for any line card after just resetaing them do you? -
HT4113 my daurther has forgotten the ipod password to unlock it how do you reset it
my daughter has forgotten her password to unlock her ipod touch
how do you reset the ipod for no password
thanksrestore it in itunes but make sure she has it backed up
and if you dont know how to restore it heres how
http://support.apple.com/kb/HT1808?viewlocale=en_US&locale=en_US -
I do not get an email after password recovery
I do not get an email after password recovery
10/26/13 I have tried several times to no avail today. Oddly, the password was saved under my main email addree to get into the forum but I can not get downloads to download.
Is there an issue with Apple server responding to sending password recovery to my main email address today? -
My daughter has forgotten her ipad password please help
Hey MrsPniok777,
These are the recommended steps if you have forgotten or can't remember your passcode, or if your device displays a message saying it is disabled:
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes.
If you have chosen to encrypt your backup, it will contain the passcode. Disable backup encryption before restoring from backup. Learn more about iOS backups in iTunes.
When the backup and sync is complete, select Restore from Backup and choose the most recent backup of your device.
If you have never synced your device with iTunes, or you do not have access to a computer, move on to the section at the bottom of the following article:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Welcome to Apple Support Communities!
All the best,
Delgadoh -
Forgotten the login password at start-up. OS X Lion.
I have been a Mac owner since 1986 but have never encounter this problem.
My father who is 91 purchased an iMac in January used it once. He is now just setting it up again after he has recently moved and this will be his only computer… finally getting rid of the PC world of Bill Gates and into a real computer. However, he has forgotten the login password at start-up which was set-up at the Apple Store.
Can I reboot the machine with a CD (have one for Snow Leopard) and change administration details this way even though is running OS X Lion?
Thanks for your help in advance as for my 8 Macs in my own business (design company) I don't use login ids at machine start-up for my employees.Thank you Frank. This looks like an easy and straightforward fix.
However, I won't know until Sunday as my father lives in Toronto (I am 2 hours away), so will have to wait until I his Mac up and running. Then back into the world of the internet, email, Skype and all that good stuff for him. -
Hi,
Has anybody done a Password Recovery on IDS 4235 IOS version 4.1.
Kindly suggest on the same.
Plz reply me on [email protected]The use of tftp only applies to the IDS-4215.
If you have console access to any other Cisco IDS device, you can pick the recovery partition from the LILO boot menu. This will force the appliance to re-image itself, setting the 'cisco' account password back to the default.
I hope this helps,
Alex Arndt -
My account has been hacked, what can i do ?
My I tunes account has been hacked, the password has been changed and the contact email has been changed as well. What can I do ?
Then you may have to ask Apple to just shut down the account. Also let your bank know. Contact iTunes Support as well. Good luck
-
When trying to update my apps on my phone, after logging in it says my account has been disabled for security reasons. I've updated my password but it still says its disabled. Any thoughts?!
Hi,
If you have followed everything in the link below, and still have the problem, click on one of the links at the very bottom under "Additional Information". That's all we can do for you here:
http://support.apple.com/kb/TS2446
Cheers,
GB
Maybe you are looking for
-
Hi All, I recently purchased 13" Macbook Air with OS 10.10.2. I want to use my 1TB Seagate backup plus external hard drive as time machine and my windows 7 pc. Please suggest a method. Thanks in advance for your reply.
-
PI 7.3 receiver AAE idoc scenario-No receiver comm channel found in ICO
Hi, I am working in PI 7.3 receiver AAE idoc scenario.When I try to configure Integrated Configuration(ICO),I am not able to see the receiver comm channel in receiver agreement. What is the reason for this??I have configured the communication channel
-
Accessing JMS Queue/Topic located in different Managed server on same domai
Our use-case is as follows. In our weblogic domain we have SOA_Cluster and a stand alone managed server. All the custom JMS resources belong to a JMS server that is targeted to stand alone JMS server. We are trying to access JMS Queues/Topics located
-
Can I re-install fcp7 AFTER installing fcpx
Now that I've somewhat committed myself (a good choice of wording) to FCPX, I think it might be prudent to re-install FCP 7 (studio 3), which I had dumped. I have read the help page on how to install fcpx on a machine which has fcp7, but I cannot fin
-
BADI ME_PROCESS_PO_CUST with ME21N
Hi. I'm using the BADI ME_PROCESS_PO_CUST, i create an implementation and i'm using the method process_item to make some checks in the field Payment Term (autocomplete this field from the table lfm1 acording to lifnr). I have a problem, when i hold a