Account hasn't been charged-"Order could not be found." = One sad day. Help?

That's my order number(s). I ordered today at about 8 am, and nothing has been charged to my checking account. Also, everytime I try to check my order status, it gives me the lovely, "Order could not be found." - message. Should I be worried? 

cathied wrote:
Are you using your order reference #? I was using the actual order # (oops, I hadn't finished my coffee yet). 
I would think that if you have the confirmation you're all good. I can a $0.00 authorization from Verizon on my account, but they've not charged my card. Most people whose cards have been charged also show a "shipped" status, so I wouldn't worry too much about it if you have the confirmation. If you don't see it tomorrow maybe call *611. You probably don't want to call today because there are a lot of people calling 5-6 times just to see if their order has shipped yet and comparing answers so they can come on here and complain about the inconsistent answers LOL!
Let me clarify- You SHOULD be using the order reference # and NOT the order number. Sorry..

Similar Messages

  • AIAB - Account Acquisition:Acquis. and production costs could not be found

    Hi Guys,
    I want to doing Settle Asset Under Construction with AIAB,
    when i doing Process distribution rules with target Asset on time-dependent it's Cost Center, it's no problem and success
    but if i doing Process distributin rules with target Asset on time-dependent is Internal Order, so i can't process and show error message : Account 'Acquisition:Acquis. and production costs' could not be found
    so can any body give me the solution, where is the problem ??
    Thank's
    Best Regards
    Ferry

    Hi,
    In AO90, check for the Account 'Acquisition:Acquis. and production costs' .
    Then for the GL account check the field status group.  May be Cost center might be mandatory.
    Regards,
    Sridevi

  • Account 'Acquisition:Acquis. and production costs' could not be found for a

    dear all
    when i am posting periodic asset postings through ASKB below error is comming ple help
    Account 'Acquisition:Acquis. and production costs' could not be found for area 90
    Message no. AU133
    Diagnosis
    When creating the accounting document, the system could not find account 'Acquisition:Acquis. and production costs' in depreciation area 90 for company code SCIL.
    Procedure
    Enter this account in the account determination for Asset Accounting.
    thanks

    Dear bikkina.prakash
    please check were you properly maintained the AO90 for GLs for Depreciation
    also check whether you changed any depreciation key in asset master(means previously you  run depreciation. by mistakenly any body changed)
    Regards
    shankar

  • A song will not play. I have received message: could not be used because the original file could not be found. Will appreciate help on how to retrieve it.

    A song will not play.
    I have received message: could not be used because the original file could not be found.
    Will appreciate help on how to retrieve it.

    You will need to go into your Files and locate the song.  By default, iTunes saves songs in the iTunes Media Folder which can be found in the following locations:
    Mac OS X: /Users/username/Music
    Windows XP: \Documents and Settings\username\My Documents\My Music\
    Windows Vista: \Users\username\Music\iTunes
    Windows 7 and Windows 8: \Users\username\My Music\iTunes
    If you locate your song file, when you try to play it in iTunes, you will be given an option to locate.  Navigate to the file in the pop up window and iTunes will re-path the file location.
    Most people encounter this issue when moving to a new computer or if you have your music saved on an external drive or folder that you have since moved or removed.  The imperative part is finding the song so you can re-map it.

  • Account hasn't been charged but I have a tracking number

    My checking account still hasn't been charged for the iphone yet it says my phone has been shipped and is in Ontario, CA.  I also have a tracking number...  Anyone else have this issue.

    same here but Verizon usually withdraws the money once the phone is signed for... dont worry you didnt get lucky hehe

  • Asset issue  'Expense account for ord. dep. below zero' could not be found

    Hi All
    During asset depreciation run system prompt error message as u2018Account 'Expense account for ord. dep. below zero' could not be foundu2019 to avoid this we have retired the asset with scrapping after that we have executed the asset  depreciation, system prompt the same error message.
    To avoid the below configuration due to the reason we have retired the asset.
    Financial  Accounting - Asset accounting -  Integration with the General Ledger - Assign G/L Accounts.
    Can you please explain briefly?

    without doing any configuration setup is it possible to rectify the error message. Please explain asset retirement with scrap had done on last year, asset depreciation running in current year, why the above error message is showing, please clarify.

  • On itunes everytime I try and play a track the warning 'the song could not be played because the original files could not be found' please can anyone help me? Thanks

    Hi. I have been having problems with my PC and recently removed a lot of rubbish to clear it somewhat. I dont know if that is relavant however on top of that I have just received my replacement iPad2 which i had a proble with and  thought I would just tidy up my tunes before  sycing.  The problem is that everytime I click to play a track in iTunes on my PC, whilst the track is showing on my itunes, it comes up with a warning 'the song cannot be used because the original file could not be found. Would you like to find it'. I have tried clicking 'locate', but all that appears is 'music Library' 4 different dates. Help i am very confused, can any shed any light on this
    Thank you

    Sounds like you have somehow moved your itunes music library to a different location to where iTunes thinks they should be. Your music should be in a folder called "iTunes Media>Music". If they are located there, try going into iTunes, right clicking on one of the songs and then "get info". When the box pops up, on the first screen it should give a location line where it thinks the music is located. If it is differen't to where you music is stored, try and match it up to the location line that was in the "get info" box.

  • Photo could not be found Problems - can anybody help

    On opening iPhoto I get  an error message saying 'The photo .... could not be opened because the original could not be found'. When I cancel another pops up and there appears to be hundreds of them. iPhoto is frozen and the only way to get out is Force Quitting.
    The library I use is an Aperture library and the sharing with Aperture used to be OK. What is particularly puzzling is that when I open the library in Aperture there are no problems and all photos appear to be there. I can work quite happily in Aperture with no apparent difficulties.
    However I do like to use IPhoto as well. I have tried rebuilding the iphoto library. I have uninstalled iPhoto and supporting files using App Zapper and I have reinstalled. However the problem is still there.
    Anybody got any advice as to how I can resolve this problem?
    I am using latest versions of all software.

    The library I use is an Aperture library and the sharing with Aperture used to be OK. What is particularly puzzling is that when I open the library in Aperture there are no problems and all photos appear to be there. I can work quite happily in Aperture with no apparent difficulties.
    Have you checked the original master image files in Aperture? Are the original master image files in Aperture  referenced or managed? Do you see the originals, when you toggle between original and version by pressing the "M" key?
    I'd suggest to use the Aperture Library Firts Aid Tools to repair the Database and to reair the permissions, since it is an Aperture Library, see: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
    What are your Aperture and iPhoto versions? Have you upgraded recently?
    Regards
    Léonie

  • Ical sync with google calender: calender could not be found

    When I try to sync Ical with google calender with Caldev protocol. I have followed all the steps in google caldev online help page http://www.google.com/support/calendar/bin/answer.py?answer=99355. But when I try to create account in Ical, it says "calender could not be found". I have tried to search in online internet forums and help pages but there is no solution. If anyone knows about this, please help me. Thanks

    Are you insinuating that I have been posting the same comment elsewhere? That I work for Calgoo? You must have some nerve, and I wish you could accuse me, if that is what you are doing, face to face, so I could reply in a more appropriate manner.
    I will refrain from saying anything else to you until you answer these questions, and limit myself to replying that I have no relationship whatsoever with Calgoo, only downloaded it yesterday, and was trying to help people who, like me, were not able to sync Google and iCal despite following the instructions given by Google.

  • Acquisition:Acquis. and production costs' could not be found for area 01' in ABZON

    Hi  All
    I m getting one error 'Account 'Acquisition:Acquis. and production costs' could not be found for area 01' in ABZON. I know we have to maintain accounts using Tcode-AO85 but
    1) how to know the correct Account Determination.
    2) How to know the correct G/Ls to be maintained in AO85.
    Pls advice.
    Thnx in advance.
    Regards
    Pankaj

    Hi,
    In ABZON, if you are acquiring with existing asset then you cna have access to account determination / asset class from asset master. If you are also creating new asset then you will have access to asset class.
    In OAYZ, we assign account determination to asset class. and in AO85, we asign GL account to account determination.
    Hope this will help you.
    Thanks,

  • Error: NIhelpserver could not be found

    Hello everybody,
    I am trying to find an example using Traditional DAQ in NI example finder.
    But when clicking on an example to open it, an error pops up saying
    "Error: NIHelpserver could not be found."
    Can anybody help me on how to get rid of this error and look at the examples for Traditional DAQ.
    I am using LabView 7.1 running on windows 2000 professional.
    Regards,
    Nitin

    Hi Nitin,
    This issue has a Knowledge Base on it (click here)
    Follow what it says in that page and you should be up and running
    Cheers,
    Message Edited by Kabul on 09-11-2007 04:57 PM
    CLA | LabVIEW 7.1... 2013
    www.renishaw.com

  • SERIAL NUMBER YOU PROVIDED IS VALID BUT A QAULIFYING PRODUCT COULD NOT BE FOUND ON THIS COMPUTER

    I HAVE DOWNLOADED ACORBAT XI PRO AND WHEN I CLICK ON ICON ON MY DESK TOP THIS APPEARS
    SERIAL NUMBER YOU PROVIDED IS VALID BUT A QUALIFYING PRODUCT COULD NOT BE FOUND ON THIS COMPUTER
    HELP?

    Hi elizabethr49128712,
    Did you upgrade from a previous version of Acrobat?  The "qualifying product" is the older version that you owned before you purchased the upgrade.  It is what qualifies you to use the less expensive upgrade version. So you need to select the older version and provide its serial number to prove that you qualify for using the upgrade.
    Please see this document for more information:
    Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
    Best,
    Sara

  • "original file could not be found" message

    In my itunes library, I used to get an option to “clear” a song if I right clicked it. Now there is only “copy.”
    So to remove the song, I opted for the “show song file” and then manually deleted it from the folder.
    However, the file is still there, or at least the phantom version of it, in my library. And when I click it “I get "original file could not be found" message.
    How do I properly remove the song from the library?
    And how do I get rid off that annoying “"original file could not be found" message”?
    Any help is greatly appreciated.
    Thanks.
    NS
    hp laptop   Windows XP  

    Oh. OOps, I was posting to the wrong thread.
    About your problem:
    Make sure you are in the Library, not a (smart) playlist. Select "Library" from the top of source list (the list on the left of the screen).
    Did this do it?

  • The song could not be used because original file could not be found

    I just loaded iTunes on my new laptop running Windows 8. I then synced my iPod Nano hoping existing songs would be imported. Songs seemed to come across but when I try to play on my computer I get message - "The song could not be used because original file could not be found." Can anybody help?

     
    Solution may be found if you search in the "More Like This" section over in the right column. 

  • I just replaced my macbook's batter and charger about a month ago, but it hasn't been charging for about 2 days now? Could someone help identify the problem and/or provide a solution.

    I just replaced my macbook's batter and charger about a month ago, but it hasn't been charging for about 2 days now? Could someone help identify the problem and/or provide a solution.

    Try Resetting the System Management Controller (SMC)

Maybe you are looking for

  • IMac showing 'no drives' on menubar eject button....what to do??....

    My iMac suddenly started spitting out discs of any kind and after looking at the menubar Superdrive eject item it shows 'no drives'. This is confirmed in System Profiler and Disk Utility...it's just not there. Before I lug this thing down to the loca

  • Severe startup problems (sounds like the hard drive is done.)

    Hey all, Last night, I attempted to wake my iMac out of sleep mode. The screen prompting me for my username and password came up, and I entered in my password. After pressing enter, the system hung and all I saw was the colored spinwheel. I shut off

  • Exception while using struts with jsf

    Hi Iam trying to integrate struts with jsf. when iam trying to load jsf page ...getting the following error Unable to initialize jsf interceptors probably due missing JSF implementation libraries Please help me to fix this .

  • RequestFocus not working

    In a splitpane i'm having a text pane and Jtree. i added mouse listener to both the components and in the mouseclicked method i'm calling this.requestFocus(). First i clicked on the Tree and immediately started typing on the textpane. when again i cl

  • Urgent - Customer Exit

    Hi All I am trying to write a Customer exit. But it is not working. i have created a Formula Variable (Zvar1) with customer exit to calculate Days Elapsed. This Days Elapsed should show the day which the user enters. For example if user enters 2004/0