Account ID field is not display in FB60

Hi,
In FB60 transaction, Accound Id is not display in the Payment Tab, but house bank is displaying. Is there any configuration to be done, let me know what to do?
Thanks

Hi
Follow the following path:
i
IMG>Flexible Real Estate Management (RE-FX)>Activate Real Estate Extension
Please ensure whether this setting will not effect you other functionalities.  Take the help of basis or abaper for doing the same.
Kindly reply after you have done
Best Regards
Mukesh Mokash

Similar Messages

  • TS1347 icloud contacts "home field" dose not display on ios7?

    When looking at contacts that are stored using icloud on my ios devices, the home field is not displayed even when edited. 
    This has only happened recently but when I log into icloud using a browser all of the details are there.
    Please can this be fixed?
    Thanks
    Problem using iphone 4s / 5 / ipad mini. ios 7.04.

    Thank you for your response.  I guess I should have indicated the things that I have already tried .  I have already attempted this step couple of times on the iPhone.  I also deleted the iCloud account on the iPhone and added it back on.  None of those things had any effect.  I guess the next thing I could try is backup>full reset.

  • New ALV field is not displaying

    Hi
    I have added the currency field in the existing ALV report.
    The final internal table having the currency field and it has value. Curreny field is not displaying in output. Pls help
    Below is my ALV code for currency.
    PERFORM FILL_FIELDCAT USING
    'WAERS' SPACE SPACE 'CURRENCY' 'CURRENCY' 'CURRENCY'.
    READ TABLE GIT_FIELDCAT INTO LX_FIELDCAT
              WITH KEY FIELDNAME = 'WAERS' .
      LX_FIELDCAT-OUTPUTLEN = 5.
      LX_FIELDCAT-JUST       = 'L'.
      MODIFY GIT_FIELDCAT FROM LX_FIELDCAT INDEX SY-TABIX.
    FORM FILL_FIELDCAT USING    P_FIELDNAME
                                P_NO_OUT
                                P_DO_SUM
                                P_SELTEXT_S
                                P_SELTEXT_M
                                P_SELTEXT_L.                    "#EC *
      DATA: LX_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
      CLEAR LX_FIELDCAT.
      LX_FIELDCAT-TABNAME    = 'GIT_LIST'.
      LX_FIELDCAT-FIELDNAME  = P_FIELDNAME.
      LX_FIELDCAT-NO_OUT     = P_NO_OUT.
      LX_FIELDCAT-DO_SUM     = P_DO_SUM.
      LX_FIELDCAT-SELTEXT_S  = P_SELTEXT_S.
      LX_FIELDCAT-SELTEXT_M  = P_SELTEXT_M.
      LX_FIELDCAT-SELTEXT_L  = P_SELTEXT_L.
      APPEND LX_FIELDCAT TO GIT_FIELDCAT.
    ENDFORM.                               " FILL_FIELDCAT

    You have to [maintain maintenance dialog|http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/a7/513484407a11d1893b0000e8323c4f/frameset.htm] as described in the link.
    Regards,
    Raymond

  • SQL expression field is not displayed on the page header if no records

    Hello
    I'm creating a quite simple report. In this report I've got a SQL expression field which returns a DateTime
    I display this field on the page header section.
    Everything is working fine except when my principal query doesn't return any records my SQL expression field is not displayed. It doesn't seem to be evaluated.
    So, I would display this field even if my Details Section doesn't contains any record.
    I hope you understand what I mean.
    Can someone help me?
    thanks

    Hello,
    I thought about creating a formula but the value I need is stored in a database.
    So i created a simple SQL expression field.
    SELECT CONVERT(DATE,j_1) FROM VW_STD_DATEFIXING
    And this expression doesn't have any dependencies.

  • RE: my input fields does not display when running the page

    my input fields does not display when running the page
    why is that so?

    Hi,
    Can you send the HTML code for us?
    Afonso

  • F-90. asset value date field is not displayed

    Dear all
    In asset acquisition posting through F-90. asset value date field is not displayed at the time of entering acquisition. It is in supress mode. so system is capturing the capitalisation date. But we can see this capitalisation date as asset value date in fb03 display. Now i want to display this field as optional field while creating the entry and also i want to change the field in display mode to change mode. kindly tell me the menu path to access the settings.
    Thanks With  Regards
    RSS.

    Hi,
    You can enter a diff asset value date for your acq posting, only thru transaction ABSO using TType 100.
    This will resolve your issue.
    Thanks,
    Srinu

  • Vendor PMT terms Not Displaying in FB60

    FI experts, I am entering a vendor invoice thru FB60, but payment terms are no longer displaying, I have verified vendor master data and payment terms is maintained properly. I don't have this same issue with customer invoices thru FB70.
    Can someone assist as to what could have cause for vendor payment terms not to display on FB60 anymore. The problem is that this is causing for vendor invoices to be entered pay immediately and the payment terms in vendor master are not being taken into account.
    The only new thing we have done was create a new payment terms with a discount, which works perfect when you enter the payment terms manually in FB60.
    Thank You for your help.

    Hello Frank,
    For SAP standard posting key 31 is for incoming invoices and not payment.
    I am not sure why it worked before to you but this is the standard purpose of this posting key and it will not affect negativately other areas. If you want you can do some tests with integrated process between areas, to be sure but you will be using the standard, so do not worry about it.
    In help.sap.com you will find more information about posting keys but I am providing to you all the information about it. The change that I proposed to you is the right way that the posting key should be configured.
    I hope I could clarify your issue and the problem is resolved
    Best Regards,
    Vanessa Barth.

  • All fields are not displayed in SM30

    Dear All,
    I have created one Z-Table with 5 fields. For that Z-Table I have maintained table maintenance generator. Now in SM30 I am able to see only 3 fields, I have checked all the options but I am not able to find out what is the problem that 2 fields are not getting displayed.
    Please tell me what might be the issue?
    warm regards,
    nishu

    HI,
    While generating the TM there is oneoption which can disable some fields in sm30.
    I think they may be the reason in your case.
    regards,

  • Dynamic Text Field is not displaying foreign characters... HELP!

    I have a dynamic text field that is not displaying foreign characters properly. They appear as boxes.
    Here's what I've tried.
    Under properties for the text field, I clicked on the embed characters button. In there, I pasted all the special characters I would need and clicked okay. Shouldn't this be enough for the text to display properly? What am I missing? Please help...

    More info: I'm noticing that in the actual dynamic text field in my .FLA file, if I type a foreign character like é, it pops up as a block. My family font is set to New Caledonia... is it possible that New Caledonia doesn't have those particular glyphs? The thing that doesn't make sense to me though is, last year when I made this card, it worked fine with New Caledonia... Any help is greatly appreciated!!

  • TDS line items are not Display in FB60

    Hi Experts,
    when in simulate a document in  T code- FB60. the TDS amount is calculated properly . DR , Cr is ok but the Line item of the TDS is not displayed.  when i post the document and open in FB03 all line items are dispalyed with TDS Line items also.. Proper Tax code of payment and invoice is attached.
    why not shown in FB60 when simulating a document??

    Hi
    If in FB60 you want to simulate tax items also, click on simulate from menu, you will be able to see the required details. If you click on simulate icon, it will not be visible.
    Regards
    Sanil Bhandari
    <a href="http://www.vcq.biz/">nature wallpapers</a>, <a href="http://www.utorrent.name/">utorrent</a>f in FB60

  • Which some field do not display

    the same field,some of it do not display the content
    also , when i use the function % total , the row of the function display,the col of it
    do not,why
    i confuse! can some one help me ! appreciate!

    Can you use repeating frames to show this field? Some kinds of fields depends of query definitions.

  • Aligned Form Fields Do Not Display Correctly Where Visible Borders Overlap?

    I'm on creating some forms & checklists for the company I work for to simplify our project workflow.  When adding text fields to the form I'd like to add borders to segregate the various fields & make the form more presentable.
    The problem I'm having, is that I'm unable to place fields immediately adjacent one another without leaving a gap.  If I do & use the snap to grid option, aligning the top of one field with bottom of another, it does not display correctly when printed.  The border lines appear to have differing thicknesses where they touch & this makes the form look terrible.  Currently I'm having to create the borders in an excel spreadsheet, convert to pdf & add borderless fields within the pre printed borders.  While this gives me the look i want, if I later want to add to or amend the form I have to start from scratch first modifying the initial excel layout which is too time consuming.  I'm using Acrobat X Pro.  Any assistance appreciated.
    Regards
    John

    There are at least two techniques to allow you to change the underlying layout and remake the static part of the PDF, without having to redo the form fields (except new ones, and moving as needed).
    That is replace pages and copy-paste of form fields.

  • Customer fields do not display in cProj 4.5

    Hello,
    I am trying to customize customer fields with the 'Define Field Groups for Customer Fields' IMG activity
    I am using following steps to do this:
    1. Enhance database tables for customer fields
    2. Create field groups for customer fields
    3. Assign customer fields for fields groups
    4. Define fields groups per project type
    5. Save and open cProjects
    But when I start the application only the main tab and sub tabs can be seen. Other customer fields are not seen.
    Does someone has an idea what is going wrong with it and where I can start searching the problem?
    Thx, Vanessa

    Hello Vanessa,
    there is one more step that needs to be done in the customizing:
    You have to set up a field control for your customer fields (IMG activity 'Set Up Field Control'). Here you define the conditions when these fields are displayed, hidden etc...
    If you have no field control, these fields will be always hidden.
    Please do not change the standard field control 0SAP but rather copy it to your own and adapt it according to your needs. Please refer also to the available IMG documentation.
    Afterwards, this field control needs to be assigned to your project type (IMG 'Define Project Types').
    Regards,
    Silvia

  • Account Overview Page is not displaying

    Hi...user is trying to open an account in Sap crm webu ui but account overview page is not opening and please wait symbol is displaying for longtime and still user is not able to see the account overview page. please let me know what needs to be done?

    Hi,
    I think it may be <div class="html5gallery-viral-0"> (contains the social media buttons) // screencasteu.worldsecuresystems.com/AP/2013-08-01_1033.png
    It's the only element that isn't in sync with the other elements on page, when compared to home.html for example.
    Kind Regards,
    Alex Pavelescu

  • VirtualBox Description Field Does Not Display

    The VirtualBox description field does not show up any more. Here is what it looks like
    It happened right after I was modifying a description at the same time I was shutting down that same guest machine. I got a message asking me to save one thing or discard it and save something else, I chose to save the machine information and discard my entry into the description field. Now, no machines display a description.
    I can see the description if I click on it.
    To fix this, I even tried uninstalling and re-installing VirtualBox.
    Any ideas on how to fix this?

    You may want to provide information about what primary OS and which version of VirtualBox you are using.
    Perhaps you have renamed the Virtual machine folder. I suggest to locate the directory on your computer and edit the machine name of your Guest OS accordingly.

Maybe you are looking for