Account info Required for Free Updates to Free Apps

Why do I have to enter account payment info (i.e. credit card number and verification code) to receive free updates to free apps?

I'm being made to do it because I'm signing in from a different computer after my last one died.
Unfortunately my saved credit card was cancelled ages ago and I can't remember the CVV so there is no easy way for me to change my cc info or download a free app.

Similar Messages

HT2731 is iTunes Store account really required for downloading and installing free Apps?

is iTunes Store account really required for downloading and installing free Apps?

Yes. The apps you buy are registered in your account, so you can download them in all your devices

I have a G5 and bought and upgraded to osx 10.5. now i need to upgrade to 10.5.6 or higher, but when i download and try to install, i get message "this volume does not meet requirements for this update".

i am trying to sync an ipad to a power mac g5. i bought and upgraded to osx 10.5 and have tried to download and 10.5.6 or higher, but i keep getting same message: "you cannot install mac os x update on this volume. this volume does not meet requirements for this update". help!

Mac OS X 10.5.8 Combo Update
Java for Mac OS X 10.5 Update 5
To me, in all such updates, goes without saying maybe: backup, repair permissions, repair your drive (Disk Warrior does more reliable and thorough job, and it comes out to pennies if you don't wait until needed). Clone your system so you can restore or use the backup - just in case.
I'd even do a fresh format after your clone is done and do a full OS clean install and update, and then a quick import from Setup Assistant.
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
I'm going to assume there is something with the partitions on the drive, partition table most likely, though I know I've seen others with that error message - doesn't really point to cause, rarely does (make sure latest firmware update etc is sometimes included but again, we know that isn't why).

10.5.7 This volume does not meet the requirements for this update.

First, 10.5.7 is not showing up in software update. I downloaded both the delta and combo 10.5.7 updates and they both give me "This volume does not meet the requirements for this update." I've done all the requisite stuff, permissions, volume check, reset PRAM, etc. I've downloaded the updates several times, and they worked on my 2008 iMac and 2007 Macbook Pro, so I know they work. I've searched and searched and can't find a resolution. It's as if there is some signature written to my boot volume that is preventing this update. Applecare was of no help either. Any ideas?

Hi! Im new to this forum and i really dont know if this is the right place for me to say this but i really need some help! I have a MAc OS x 10.5.7 and had bootcamp installed on it so i could run both windows and mac! Over the last few days ive recieved a trojan virus on my windows... so i deleted my partition on mac so i basically just had Mac... now i am trying to reinstall my partition but disk utility is saying that i have an invalid volume free block count as it should be 41189365 instead of 41182017....argh! ive read the help stuff on it and it suggests me removing everything off my mac... but will i need 2 still have the mac install disc 1 to hand? as i have currently misplaced this and im ripping my hair out! Ive never had problems with my Imac until now and im really worried! I could really do with the help! Thanks Sam

Why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

Hi there ethangabe,
You may find the information in the article below helpful.
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/ht2589
-Griff W.

OS X 10.10.1 installer says the requirement for the update does not meet

Greetings.
I noticed the auto update setting of my MacBook Air had been not working for a month or so today.
So I tried to manually update OS X 10.10.1 (released Nov 17, 2014) and got this message from the installer: "OS X Update can't be installed on this disk. This volume does not meet the requirements for this update."
But the thing is, my mac already meet the requirement, as description of the update.
My mac is on OS X 10.10 and OS X Yosemite 10.10.1 Update states the system requirement as "OS X Yosemite 10.10"
How can I update my mac? What can be the source of this problem?
FYI, once I participated in Public Beta of Yosemite and clean-installed 10.10 from 10.9 with disk formatting.
Tried solution: rebooting, and repairing permission and repairing OS disk using Disk Utility.
Thank you in advance.

Barney-15E wrote:
In About this Mac, click on the Version number. It will change to a build number. Please post that. Although it sounds like you don't have a beta still installed, it may be still hanging around which would cause the problem you see.
The GM Build was 14A389.
Never knew the version number could be clicked, and now it says 10.10 (14A379b).
I googled the build number and it's Public Beta 4. Now it is clear that my mac still have old beta version AND the OS X showed a message to me when I tried to download a copy of Yosemite from the App Store:
Maybe the OS thinks itself as a full release of 10.10 for some reason. It explains why it did not auto download and install the system updates, regardless of the auto update System Preference of App Store.
Now I am going to download and re-install 10.10 rather than updating the OS.
Thank you very much Barney-15E for providing the clear answer and others for reading and giving advices.
Have a nice day!

Error in FB60 - Additional account assignment required for field BSEG-HBKID

Hi Experts
While posting an Invoice for a particular company code in FB60, we are facing the following error :
"Additional account assignment required for field BSEG-HBKID"
Message no. F5A122
Diagnosis
Additional account assignment has to be carried out for some fields on the detail screen.
System Response
Error message
Procedure
Select the relevant items and call up the detail screen.
We are unable to post any Non PO Based Invoices in this company code.
Kindly guide us on possible methods to rectify this error.
Regards
MM

Dear,
First Check the setup as described by Atif,
Also in OBC4 you will not find HBKID field, for this u need to select appropriate FSG, Under Payment Transaction Group please check if own Bank field is optional or not. by doing this as optional system will show House ban Field in Payment Tab of FB60, will be enabled and there will be two field one for House Bank and Other will be for Account ID.
Hope this helps.
Br, Vivek

Im trying to install a new application on my mac but it keeps on coming up with 'The volume of this disk does not meet the requirements for this update' any ideas how to solve this?

I have recently fully updated my mac to 10.8.2 and i am trying to install a small facebook application but every time i come to chose the disk it says ' OS X facebook developer preview can not be installed on this disk. This volume of this disk does not meet the requirements for this update' any ideas on how to get round this?
thanks

That may be the new Mountain Lion "sandbox" protective software kicking in, possibly, because ML "thinks" that App doesn't meet ML's new strict security requirements. A common phenomena. If you feel the 3rd party App is really OK, you can override this feature and install the new App by holding down the Command key when you click to install the new App. That's one possibility for the error message appearing. If not, another possibility is that that Developer Preview software package requires some previous piece of software be installed prior to downloading this Preview. You would have to check the Facebbok websiste's Developer Forums for help if this is the case.
Hope this helps

Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirement for this update?

Hello everyone,
I just purchased MBP 2.6 Ghz running Lion 10.7.3 and I am trying to install the Combo Update 10.7.4.
After I launch the installer at the Destination Select step I get this message:
Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirement for this update.
The sharing and permission on Macintosh HD are "Read & Write" for system, wheel and everyone.
Please Help
Thanks

Welcome to Apple Communities
If it's a new MacBook Pro (2012), you have to update in  > Software Update. They need a special version

OS X update (10.9.4) can't be installed on this disk This volume does not meet the requirements for this update.

I have the mac with following specs I need to update the OS X 10.9.4. I tried OS X Mavericks 10.9.4 Update to install manually but it says "OS X update can't be installed on this disk This volume does not meet the requirements for this update." Please help me.

Click here and run the combo updater. The one you previously downloaded requires 10.9.3.
(111238)

Tried to install Mountain Lion and it comes up with the following message Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

Tried to install Mountain Lion and it comes up with the following message Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

Go to  > Software Update and install updates. Finally, go to App Store, buy Mountain Lion and install. Open > http://www.apple.com/osx/specs/

Getting this:You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?

I am getting this message: You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?
is there a way to install this update?

Hello
More information would be useful, for example which Mac OS are you running.
On the left menu item  About this Mac provides useful information.
Also did you use Software Update to determine the update?
Using Software Update can ensure you download and install the correct package for your particular Mac and OS version.

OS X 10.8.1 update cannot be installed on this disk. This volume does not meet the requirements for this update.

HI
I had installed mountain lion on my MBP 13" early 2012, but it has lots of issue, when i tryed to up date to 10.8.1 it shows the error "OS X update cannot be installed on this disk. This volume does not meet the requirements for this update"
if i run the software update nothis is showing, current os version is 10.8

This did not work for me.
Note, that at one point the Apple developer knew exactly what the problem was and decided not to let us know. If we were tole what the problem was we woud have an idea of how to proceed.

HT6030 I can't install the update for Mail for Mavricks because it says "This volume does not meet the requirements for this update"? It's my iMac hardrive with 791GB available.

I've recently installed Mavricks on my iMac and Mail went completely rouge on me. Tried switching to using Gmail directly but it's a terrbile user experience so I decided to install the new Mail update for Mavricks but have been geting this message. "This volume does not meet the requirements for this update"? My hardrive has 791GB available.

Hi Allan,
I thought I did explain it, but sorry if that wasn't clear.
I get the little pop-up alert that tells me I have a new messages (Shows the sender and an abreviated version of the message) but those actual messages sometimes don't appear in my inbox until up to an hour later.
Jason

Hard drive "does not meet the requirements" for system updates

Hi,
I'm running 10.2 and I'm trying to update my computer to the more recent version, except that I've gone through the update downloads on this site and anything higher than 10.3 tell me I need to run 10.3 to run it. When I tried to upgrade to 10.3, I was told that I "cannot install this software on this disk. This volume does not meet the requirements for this update". What does that mean and how do I rectify the problem? Thank you very much in advance.
- Jen

Hi Kappy! I have a similar problem: I had a problem in the past and had to re-install the system. I now have a previous sytem folder on my mac which I do not dare touch. I used to have a later version than 10.3.3 (I cannot remember which). I am now trying to update with the 10.3.9 combo update (just bought a new ipod) and I get the famous "does not meet the requirements" message. I have repaired permissions and done Onyx maintenance - still nothing. I wonder whether somehow the installer detects that there is already some newer component installed and does not want to re-install. I am awfully frustrated... Thanks in advance for your help.

Account info Required for Free Updates to Free Apps

Similar Messages

Maybe you are looking for