Account integration problem with ECC 6.0

Hi
We have using PPM 5.0 system with ECC 6.0 system (No EHP). Problem we are facing is we are not able to created the PS project automatically.
I have done already all the necessary settings and in manual case it working fine it seems. I eager to know any suggestions on this to resolve, to achieve automatic creation of project.
Do you feel there is any issue with EHP?
Regards,
Pramod

Hi Pramod,
Refer to the note 1427365 for details. The pre-requisite for PS integration is as below:
SAP Portfolio and Project Management 5.0 SP02
and
SAP ERP 6.0 SP 17
or
SAP ERP 6.0 EhP2 SP07
or
SAP ERP 6.0 EhP3 SP06
or
SAP ERP 6.0 EhP4 SP06
or
SAP ERP 6.0 EnhP5
Regards
Amit

Similar Messages

TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

iPad mail account says problem with 'ssl settings' - can you help me?

The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

CProjects 4.0 - SAP R/3 4.7 - Accounting Integration problem.

Dear all,
I have performed all steps necesaary for accounting integration in cProjects and SAP R/3 FI System.
I can even see and assign the cost rate that I have created in cProjects to a project role.
System also calculates the cost for the role multiplyin the cost rate with the number of hours the resource has been assigned.
However, it also displays the following warning messages:
1. An error occurred in Accounting (system QASCLNT777)
2. Function module "IAOM_CPRO_MISC_RFC_CPDEF_CHECK" not found.
3. No cost center could be determined for organizational unit 00000000
4. Maintain a revenue element for cost/revenue rate ZZ_000001
5. Error occurred in accounting - check the costing in the ERP system
When I execute the transaction COCPCPR in R/3 system, I cannot see the internal order, but see the project name under "Internal Orders not created"
Regards,
Reema.

Hi reema, if we refer to the documentation pertaining to accounting integration for cProjects 4.0, we see that the prerequisities is ECC 6.0
Please see below from the help documentation
Integration
To be able to use the functions of accounting integration, you have to implement the Internal Orders (CO-OM-OPA) application component and Project System (PS) in SAP ECC 6.0.
Prerequisites
You need to make a number of Customizing settings in both the Collaboration Projects and SAP ECC Implementation Guides (IMG):
Settings in the Collaboration Projects IMG
You selected the Controlling in mySAP ERP setting in Customizing for Collaboration Projects under Connection to External Systems ® Accounting Integration ® Activate Integration as the Accounting Integration Scenario.
I feel the error messages are thrown because you are using SAP R/3 4.7. I see from the SAP notes, for CATS integration with cProjects 4.0 and SAP R/3, SAP consulting is available, but nothing is mentioned for accounting integration.

WDK 8.1 update download issue and integration problem with VS Express 2013

I have VS Express 2013 in my machine and want to download the WDK 8.1 Update. However, I am facing two issues:
1. The download site says : "You have to register for downloading. Click on continue to register and download". On doing so it asks for what I want to download. Then it redirects to the page saying "Thank You for downloading". However,
it has been more than 10 times since yesterday and yet no file has popped up for download. It is the same problem with other machines.
2. On installing WDK 8.1 from softonic, it has created a separate folder and shows no way for its integration with VS express 2013. I do not get any "Windows driver functionalities" in VS Express 2013.
Could somebody point me where I am wrong.
Thank You in advance

Hi codeahead,
About this (1) issue, could you please tell me where you download the WDK 8.1 Update?
Generally, I know that we can download the WDK 8.1 Update from the following Microsoft Official site.
http://www.microsoft.com/en-us/download/details.aspx?id=42273
So please you check if you download the WDK 8.1 Update from the above link.
(1) If no, please try to download this WDK 8.1 Update from the above link check this issue.
(2) If yes, could you please tell me if you register a life user account from this Microsoft?
Generally, I know that when we download some software from this Microsoft site, we will need to register a life user account.
So please check if you have a life user account from this Microsoft site.
However, as you said about the (2) issue. Since it is related to install the WDK 8.1 with VS2013 Express. Since I am not the VS Install experts, so I suggest you can post this issue directly to this VS Install forum:https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup
, you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

User Account Control Problems with Premier Elements 7 32 bit in 64 Bit Windows 7

I found User Account Control Problems in other forums but didn't see much in Premiere Elements, so I hope this helps others who may be having problems with 32 bit programs in a 64 bit computor. When I first got my 64 bit I didn't have problems.
Back in February I bought a Quad Core Desktop with Windows 7 64 bit. Haven't been on the forum for 7 months since I wrote in regarding importing video with the Pyro AV Link (Premiere Elements Tips and Tricks). I was having problems importing video which started after March 28 sometime, as that was the last time I didn't have a problem importing VHS. Took me a few months off and on to find out what worked.
I started uninstalling Windows updates and any programs I had installed back to that point in time. Checked after uninstalling each item. The capture screen would come up on a delayed basis but clicking on capture did nothing. Although no driver is required for IE1394 (so they say) I read where some people using the Legacy driver had fixed some problems, so I switched to the Legacy. Seemed to work great (for a few minutes).
I had even uninstalled and reinstalled PE7 but no difference. Finally I noticed a shield in the PE7 Desktop icon. Thats weird. Never had that before. Just decided to show up after I had done all of the stuff I mentioned. Turns out at some point in time since I've had the computor Windows 7 decided to flag my 32 bit program as misusing the 64 bit system. User Account Control. I never bothered too much with UAC and just clicked on the yes box wen it popped up asking if I wanted this or that to take control of my computor. I tried using the minimum setting for safety reasons, and then finally turned User Account Control off. Bingo! PE7 capture works again and still working.
While I am not recommending that people arbitrarily turn UAC off, this appeared to be my problem. I would recommed that they try turning it off before uninstallin a bunch of stuff. Having a restore point may or may not have been a fix for me. I think one of the Windows Updates caused the problem but I am not going to uninstall any more stuff at this point, I have not been back on the internet or installed any more updates in my desktop. I am going to use my laptop for internet and used the desktop for video.
I am guessing this could be a problem for any 64 bit systems trying to use 32 bit programs. IE: XP,Vista,Windows 7 64 bit. In Vista there is also Data Execution Prevention (DEP) which you can turn on or off, supposedly to prevent misuse of memory (as I understand it), but Win7 either doesn't have it or I haven't found where it's located.
Maybe this has been covered in the forum somewhere and I missed reading it. Hope I am not too confusing. Anyway, whatever feedback you guys have would be great.

John,
    Thanks for your answer, and I did check out the link you suggested. However, I have Windows 7 Home Premium as most people have I think, and the XP program was not available. I started with Vista and now have Win 7. I never could navigate around in XP anyway so am content to just leave User Account Control off.
    Interesting side note to turning UAC off is that my desktop seemed to be using more of the CPUs, where half of them were "Parked" as I wrote in also about 7 months ago when I 1st got my desktop. I am pleased to say that video processing seems to go quicker with UAC off. Have to observe things some more to confirm.
    I just thought if others were having problems after installing Windows Updates and leaving UAC off worked then they could possibly pinpoint a problem.

AD account Login problem with MAC 10.6.8

Hi All,
We have around 50 odd MAC that are connected to windows server 2008 R2. the user were logining in to these MACs using their AD account. Recently few of the random MAC did not allow the user to login using their AD account.When analyzed though the MAC shows that it has connected to the Domain and the server is active with green button it has unbind itself from the server.I had to login in as local user bind the MAC back to get this resolved.
Now the same has started happeneing for most of the MAC that we have and every morning I have login as local Admin and unbind / bind the MAC with the server. this gets reset once the user reboots or shutsdown.
Have tried with few of the below solution but nothing helped:
Solution 1:
<key>mdns_timeout</key>
<integer>2</integer>
The integer value is in seconds; changing it to at least 5 should allow the Mac OS X client to reconnect to the Active Directory domain after a network interruption. In some configurations, a larger timeout value may be required.
You can change this value by using the sudo command and a text editor to edit the preference file directly. Or you can use the Terminal command below, making sure to enter it all on a single line:
sudo /usr/libexec/PlistBuddy -c 'Set :mdns_timeout 5' /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist
Solution 2:
I have seen all of the probable solutions and tried everything and still I am getting issues with 10.6.6 and after rebooting the Mac gets unbind. Or the Mac gets Network Accounts Available even when not accessing the list of users from AD. But the thing that I have done that has solved all my issues with AD on the Macs is to uncheck the box to search on all domains. For some reason I am seeing that when the Macs have this option checked, it searches through out the forest on the same domain controller more than once, so AD stops the handshaking of the authentication.
I hope this helps like it did on our Network, since then I have not seen the Macs lose the binding or slow SMB.
If you've tried this please let us know.
TIP: Uncheck Allow Authentication from any domain for Mac AD problems
Wednesday, April 20, 2011
Steven Wells sent a fix and an explanation of problems with Macs losing their binding to Active Diretory:
Unchecking "Allow authentication from any domain in the forest" is working at our college. We have been beating our heads on this for about 2 terms, with no understanding of why it works in some places and not in others. When we found this working, our IT guy said that the Security SID is being duplicated, when it looks in other domain forest, and that is what is causing the problem. This is the first time I have found an explanation for the problem.
If you've tried this approach please let us know.
Solution 3:
Solved it. Create a file in Textedit with the name 'auto_master' (no file extension) with the following contents:
# Automounter master map
+auto_master # Use directory service
/net -hosts -nobrowse,hidefromfinder,nosuid
/home auto_home -nobrowse,hidefromfinder
#/Network/Servers -fstab
/- -static
Place this in /etc/ folder
Hope this helps
solution 4:
TIP: a Kerberos fix for OS X 10.5 and 10.6 binding to Active directory
Friday, November 11, 2011
Mehdi Mafi forwarded a fix he found for problems with Leopard and Snow Leopard binding to Active Directory:
This was taken from Dane Riley's imaging building for DeployStudio.
With Mac OS X Leopard every Mac is now running a KDC (Kerberos Distribution Center). Basically each imaged machine is using the same security certificate and hash. Deploying a single image will deploy the same KDC to every system. This [Apple] article covers how to reset the local KDC so that each system is unique. Basically, do the following:
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
After deployment, perhaps using Apple Remote Desktop to all systems, re- establish the KDC by typing sudo /usr/libexec/configureLocalKDC
If you've tried this approach with Mac OS X 10.5, 10.6, or even Lion, please let us know. .
TIP: More on a kerberos fix for AD binding problems
Monday, November 14, 2011
Mehdi Mafi updated his Friday report about Mac OS X 10.6 problems binding to Active Directory:
You may want to add this. If the Mac keeps unbinding from AD (people can't log in to a Mac), here is how to fix it:
Unbind it from Domain
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
Re-establish the KDC by typing sudo /usr/libexec/configureLocalKDC
Bind it to domain again ( When you bind, uncheck allow authentication from any domain in the forest in: Directory Utilitiy-> Advanced Options\Administrative ) this fix the issue that sometimes it can' find AD under search space.
If you tried this please let us know.
Solution 5:
For Snow Leopard AD login issues, use upper case domain
Solution 6: for .local
To create this StartupItem, create the following directory as root:
/Library/StartupItems/FixADAuth
Then chown it to root:wheel and chmod it to 755. These must also be the owner/permissions on the two files it will contain, below:
Contents of our /Library/StartupItems/FixADAuth/FixADAuth:
#!/bin/bash
. /etc/rc.common
date > /var/log/FixADAuth.log
n=0
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local; n=$(($n+1))
done
echo Authentication successful: $AuthSuccess >> /var/log/FixADAuth.log echo Operation count: $n >> /var/log/FixADAuth.log
date >> /var/log/FixADAuth.log
Contents of our /Library/StartupItems/FixADAuth/StartupParameters.plist:
Description = "Fixes Active Directory authentication issue";
Uses = ("Disks");
Obviously you'll need to change "middlewich.local" to your own domain name (and the network interface name if your connection is wireless). The script checks to see if it can see the user "Administrator" on the domain, as he's a fairly common bloke, but if you've renamed yours for security reasons then pick another one. I've also included some logging functionality for debug purposes, so you can verify how well the script is working if you need to and time it in your environment before telling the users how long to wait. The /var/log/FixADAuth.log file will contain the date/time the process started, the success variable set to 1 (just to verify), how many DNS operations were required to fix the problem, and the date/time it ended. For us the time difference is normally about +30-40 seconds with around 120-180 operations taking place. Once you're happy with the script, you can strip it down to its bare functionality if you like, like so for us:
#!/bin/bash
. /etc/rc.common
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local
done
I hope this helps someone!
Regards

You are welcome.
But the question is 10.6 mac just like 10.6.8 , as long as its the same and works.
Yes. You can save some updates by using the combo update.
10.6.8 Combo Updater

Problem with ecc 6.0

hi experts,
I had installed ecc 6.0 ,
while installation i had selected EP, ep core and Process Integration component also.
i want to configure the SAP XI , how can i do it
plz help me
Edited by: kavitha l on Jan 17, 2008 5:53 AM

Hi,
First you need to read the master guide for ERP2005 carefully,
you need ECC and NW04s component toghether on a single server,
The installation of the following product instances of product version SAP ERP 2005
requires a large amount of memory and makes substantial demands on the host
performance of the CPU:
SAP NW - Adobe Document Service
SAP NW - EP Core
SAP NW - Process Integration
look at sap Note 855534 - Embedded NetWeaver Components in ERP read it carefully,
when you want to use XI/PI with ECC 6.0 ,SAP NW -Process Integration must be set up in a dedicated client
now for configuring XI/PI
login into
service.sap.com -> Release & Upgrade Info -> Installation & Upgrade Guides ->SAP NetWeaver ->SAP NetWeaver PI 7.1
here you can find instalation of SAP PI as well as the basic configuration document
regards,
kaushal

Office Integration: Problems with MS Word

Hi all,
I have a problem with word integration in SAP CRM 7.0 EhP1 SP04.
I have created, activated and populated a web service and created a word template. When creating a new document in the WebUI (button "With Template") Microsoft Word not even starts. However, the Word document based on the template was enriched with data via the web service and is available in the assignment block "Documents". When I click on the link and open the document I can make changes, but then I only can save it local and have no possibility to save it at the content server which usually should be done automatically. When I use the button "Edit" in the document details page word will not start.
All prerequisites mentioned in different sap notes and forum threads (active services in sicf, alias for content management, browser settings, ...) are completed.
Has anyone had similar experiences or has ideas for a possible solution why word will not start when using the edit button?
Do I have do make any additional settings concerning content management?
Thanks in advance!
Sebastian
Edited by: Sebastian Lenz on Oct 19, 2011 5:07 PM

Hi Andrei,
Thank you very much for your quick response and your suggested SAP notes.
With the help of note [1566793 'Procedure to create word template in EHP1 & higher versions'|https://service.sap.com/sap/support/notes/1566793] I was able to successfully create a template that is filled with data from our web service. Because we have already installed SP04 the corrections mentioned in note [1459264 'Microsoft Word does not open in CRM Template Designer'|https://service.sap.com/sap/support/notes/1459264] are implemented as well.
I would be very grateful if you could suggest any more possible solutions.
Or means "For security reasons, Microsoft Word can no longer open the document and write it back to the CRM server using the save function." it is absolutely impossible to edit a Word document, that alreay exists on the content server, and save it as new version?
Appreciating your help very much,
Sebastian
Edited by: Sebastian Lenz on Oct 20, 2011 8:44 AM

I can't safe reboot if I choose my user account, no problem with the rest or user's accounts

Hi to all,
Since I've installed ML and also after 10.8.1 upgrade, my account is behaving very strangely.
It does seem to work, but every time I restart in my account, it takes ages and starts up app I've already closed (as if it was frozen when restarted), I get Toast 10, Disk Utility, App Store, Safari, Mail and Photoshop. Slowly, very slowly, in this order. I had improved, as I had some reboots with the Mountain Lion installer asking to instal Mac OS X!
Oddly enought, that first times Finder didn't show when I pressed Cmd-Tab for changing applications, it would show only if I clicked on the Desktop.
I did a clean install of ML and imported from Time Machine. I also did a "upgrade install", that is, over what I had (already ML).
I can't restart or close down unless I do it on the cold way, that is, pressing the power butto, as I can get no shutdown dialog, and if I choose from the Apple Menu, no matter what I choose, nothing seems to happen. Same when I choose "About this Mac", nothing happens, I have to manually open System Profiler.
But, in contrast, I can open from the Apple Menu App Store with no problems, for example.
Now I reboot and shutdown my Mac thanks to the Terminal!
Another "minor" inconvenient is that my Mail Rules weren't imported, and I don't know how to pass them to the new Mail, so all my Mail lies there in the "Inbox" unclassificated
If I go to a different user, then everything works apparently. So it must be something I have added, but it can be something installed many System versions before, so I have no idea on how to track it down, although I've deleted many old applications and preferences, including some problematic Fonts, Perian, etc.
I tried safe boot, but when I enter in my user, screen turns light gray and it doesn't start anything, so I have to force a cold shutdown again with the power button and restart again.
Safe boot with a different account has no problem again.
Sorry for the looong explanation, but, although I can work in my user, I'm worried as my work slows down a lot.
Thanks in advance to any help you can give me!

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Problem with ECC 5.0 Upgrade in JOB_RASUVAR1 phase of PREPARE

I am upgrading 4.6B system (copy of production to build QA system) on Tru64 with 3TB Oracle DB. The JOB_RASUVAR1 phase of PREPARE in running for about 115 hours. This phase saves existing variants for future conversion. There is a job running at the SAP level which using a lot of CPU, but no active Oracle session for this job. The same job took less than an hour on development system (200GB DB). So far the response from SAP has been like "Unfortunatly there is no possibility to improve the performance of the reports RASUVAR1 and RASUVAR2 during the upgrade" because this phase does not happen during production downtime.
Did anyone else face similar problem?

Hi Kausik,
we recently upgrade our client systems from 4.6c to ECC 5.0, on unix environment. we too faced similar kind of problem, our job_rasuvar1 in prepare phase took almost 70hrs. after raising a msg with SAP, we were asked some correction in function module.."FASU_RS_VARIANT_CONTENTS"..check whether the following changes are already available..or not
<b>the necessary change:</b>
replace the line
PERFORM fill_tables_ps TABLES objects
with the line
PERFORM fill_tables_ps(saplsvar) TABLES objects "CHANGE
in function module FASU_RS_VARIANT_CONTENTS
2) To fix this issue I would recomment, that you stop the JOB_RASUVAR1.
Then please implement the corrections of note 712297. After this please
clear out all the entries in DB tables TASUVCAT, TASUVSVO and TASUVSVD.
You can do thie for example via transaction SE14.
Then implement the following modification to ABAP RASUVAR1:
FORM return_content USING taskname.
RECEIVE RESULTS FROM FUNCTION 'FASU_V_VARIANT_CONTENTS'
TABLES
valutab = gt_params
OBJECTS = gt_objects
EXCEPTIONS
syst_except = 1
communication_failure = 2
system_failure = 3
variant_non_existent = 4
variant_obsolete = 5
error = 6.
g_error = sy-subrc.
g_returned = 'X'.
data: l_count type i. "INSERT MOD
describe table gt_params lines l_count. "INSERT MOD
if l_count gt 20000. "INSERT MOD
g_error = 7. "INSERT MOD
endif. "INSERT MOD
ENDFORM. " return_content
After this you can restart the JOB_RASUVAR1 by just call report
please try with this & let me know. and 1 more thing, this phase again depends on database size (in our case, for 1.8TB it took 6hrs).
with regards,
Raj

TMS problem with ECC 6.0

Dear Global Support,
After hardware resizing we have successfully installed ECC 6.0 and
successfully performed DB restoration.
Now the problem lies with TMS as after installation performing necessary post installtion activity
we have configured TMS. As per all TMS check STMS configuration is fine. Even tp and domain
profile are generated.
But issues lies while releasing change request as after realease no data or cofile are populated in
trans/data or trans/cofile.
Even slog is not been generated. Kindly look into this and advice the needful.
Regards,
Partha

Hi Partha,
Is there only one system in the transport landscape at present?
If the transport has been built up in STMS properly, there should be no problem to export.
But you can create a virtual system and create the "transport route" accordingly.
Then when you release a transport, the data and cofiles should be generated.
Is the transport a local transport?
Do you get a message "LOCAL REQUEST .......... released(objects no longer locked)   "
Local request can not be transported so releasing a local request does
not export file to operating level.
If you want to transport this released local change request, you
can create a new reqeust of tranport type "Transport of Copies" from
SE01 and include the objects in <local transport number>.
Then you can transport the content of <local transport> by this newly created
request.
Hope this helps,
Paul

Integration problem with Obssocookie

Hi Guys,
I installed following with for integration:
1) OIF IdP 10.1.4.2.0
2) OIF SP 10.1.4.2.0
3) OAM 10.1.4.2.0
4) Portal 10.1.4
5) Oracle Infrastructure Component 10.1.4.0.1
Scenario :
We have Portal authenticating to OSSO and OAM is custom to OSSO. Therefore actual authentication is done by OAM. This is working fine.
Another setup is like that user authenticates at OIF Idp, its identity is federated at OIF SP side. OIF SP side "User data store" is OAM (same used with Portal). This is also working fine.
My problem is that after federation I am redirecting the user to Portal page http://twelve.mydomain.com/portal/page/portal/TOPLEVELSITE/Welcome
which is Portal home page. But portal is not automatically authenticating user. It asks me again username/password for login to portal.
I observed using ieHttpheaders that whenever a request comes to OAM it sets Obssocookie. Can I expect the same Obssocookie (set by OAM during federation) should automatically authenticate user after redirected to Portal?
Any Pointers?
Regards
Jatin

Hi Vinod,
Thanks for reply.
Obssocookie is being sent to Portal after federation takes place. I have checked this using ieHttpheaders.
I guess federation never setsup the cookie. OAM sets up the cookie.
One more thing I observed that if I login to Portal first and later on paste the URL of OAM it doesn't ask for authentication. And works perfectly.
But in reverse case if I login to OAM first (another browser) and then paste the URL of Portal it shows login page and when I click on login link. the server throws excepton in ssoServer.log file
Mon May 26 19:04:11 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 SSOStatusServlet: Entered doGet method ...
Mon May 26 19:04:11 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 SSOStatusServlet: Entered doPost method ...
Mon May 26 19:04:11 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 SSOStatusServlet: Leaving doPost method
Mon May 26 19:04:11 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 SSOStatusServlet: Leaving doGet method
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered doGet method ...
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered doPost method ...
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 SSOLoginServlet.doPost     l_sassoToken null
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 SSOLoginServlet.doPost     l_site2psToken v1.2~47D6B77E~000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 URI received is: /sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_sassoToken null
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_site2psToken v1.2~47D6B77E~000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Type: SSOPartner
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Auth URI = : /sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 URI received is: /sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_sassoToken null
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_site2psToken v1.2~47D6B77E~000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Type: SSOPartner
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Site ID: 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 entry: getPartnerConfiguration. p_site_id 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Decrypting partner token:
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token Version: v1.2
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token Site Id: 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token: 000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App Key: 65DA429FA7BE14ED
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App MaskPre: DF020AFE614B09BCE2FA403EB51575B0
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App MaskPost: 2C962379CF1AF5B1E519C58A73848110
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Decrypting early version token.
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Clear s2ptoken: hC8@g#Br<|}\Gu~HACS65WV47D6B77E~20080526190515~http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home~http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home~0~B5F1B4DB987BB2C47A27E4108CE94A91@
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Partner Version:v1.2
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Verifying hash for older partner token version.
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Partner application 9.0.2/9.0.4/10.1.2/10.1.4.0.1
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Site Key: 65DA429FA7BE14ED
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Requested URL: http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 after getPartnerConfiguration
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Calling getAuthLevel for /sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered FilePolicyManager.getAuthLevel: authUri=/sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthLevel: papp success Url=http://twelve.mydomain.com/pls/portal/portal.wwsec_app_priv.process_signon
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthLevel: pappHostPort=twelve.mydomain.com
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 No auth level found. Returning DefaultAuthLevel
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthLevel returns 40
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Requested Auth Level: 40
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered SSOLoginServlet: :processSSOPartnerRequest method ..
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 AuthUtil: SSO Cookie received: null
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Current Auth Level: -1
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 AuthUtil: Header Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 AuthUtil: isMobileClient: false
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Site ID: 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 entry: getPartnerConfiguration. p_site_id 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Decrypting partner token:
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token Version: v1.2
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token Site Id: 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token: 000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App Key: 65DA429FA7BE14ED
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App MaskPre: DF020AFE614B09BCE2FA403EB51575B0
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App MaskPost: 2C962379CF1AF5B1E519C58A73848110
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Decrypting early version token.
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Clear s2ptoken: hC8@g#Br<|}\Gu~HACS65WV47D6B77E~20080526190515~http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home~http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home~0~B5F1B4DB987BB2C47A27E4108CE94A91@
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Partner Version:v1.2
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Verifying hash for older partner token version.
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Partner application 9.0.2/9.0.4/10.1.2/10.1.4.0.1
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Forced auth type: 0
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Explicit authentication required
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Calling Authentication Director
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthClassName: retrieving plugin name for, MediumSecurity_AuthPlugin
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthClassName: returning auth plugin name, oblix.security.ssoplugin.SSOOblixAuth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Creating instance of auth plugin: oblix.security.ssoplugin.SSOOblixAuth...
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Creating instance of auth plugin: oblix.security.ssoplugin.SSOOblixAuth Done
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Calling Authentication method
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Requesting Login Page to collect credentials
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 User-Agent header: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322)
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Searching for userAgentStr : Mozilla
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 WS Request: FALSE
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Leaving doPost method
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Leaving doGet method
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered doGet method ...
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered doPost method ...
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 SSOLoginServlet.doPost     l_sassoToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 SSOLoginServlet.doPost     l_site2psToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 URI received is: /sso/auth
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_sassoToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_site2psToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Type: SSOPartner
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Auth URI = : /sso/auth
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 URI received is: /sso/auth
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_sassoToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_site2psToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Type: SSOPartner
Mon May 26 19:05:18 GMT+05:30 2008 [ERROR] AJPRequestHandler-ApplicationServerThread-5 No site2pstoretoken from SSO partner
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 exception before getAuthLevel
oracle.security.sso.ias904.toolkit.IPASAuthException: No site2pstoretoken from SSO partner
     at oracle.security.sso.server.auth.AuthDirector.getAuthLevel(AuthDirector.java:206)
     at oracle.security.sso.server.ui.SSOLoginServlet.doPost(SSOLoginServlet.java:480)
     at oracle.security.sso.server.ui.SSOLoginServlet.doGet(SSOLoginServlet.java:333)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:826)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:332)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Calling getAuthLevel for /sso/auth
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered FilePolicyManager.getAuthLevel: authUri=/sso/auth
Mon May 26 19:05:25 GMT+05:30 2008 [ERROR] AJPRequestHandler-ApplicationServerThread-5 Unexpected Exception received
java.lang.NullPointerException
     at oracle.security.sso.server.policy.FilePolicyManager.getAuthLevel(FilePolicyManager.java:396)
     at oracle.security.sso.server.auth.AuthDirector.getAuthLevel(AuthDirector.java:234)
     at oracle.security.sso.server.ui.SSOLoginServlet.doPost(SSOLoginServlet.java:480)
     at oracle.security.sso.server.ui.SSOLoginServlet.doGet(SSOLoginServlet.java:333)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:826)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:332)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
Mon May 26 19:05:26 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Leaving doPost method
Mon May 26 19:05:26 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Leaving doGet method
Regards
Jatin

HT1694 hotmail account Sync problems with my iMAc . H

Hi really strange problem, i receive hotmail account emails wit "Mail" but whatever action i do on it , like read , delete etc.. doesnt reflect on Hotmail Server ( hotmail web page)
That problems is not reflected on my iphone or ipad.
Thnks
Rubén.

SOLVED, WITH THIS
Lewisb1 Canada
Re: Syncing notes
26-oct-2013 0:10 (in response to Lewisb1)
I solved my problem. All I did was go to system preferences> iCloud. then logged in and unchecked my notes and then checked it. Sync was quick and proper.
Thanks to all for your help and suggestions.
Thank you javieri for this recommendation. Did the trick for me. Notes now syncing btwn iMac, iPhone and iPad.

Help...help...help! Uninstall/reinstall/account-access problems with my Suite

To Adobe support staff:
I'm having great difficulty trying to find the help I need and would really like to talk to someone at Adobe for which I seem to be unable to do anywhere. I spent great money on my products and nothing here or anywhere will help. This really bugs me here that we are being forced to have to go through this damn forum as I can't get the direct help I need and this delays my progress.
In particular, I've been having trouble trying to uninstall my product as it keeps looking for files that don't exist anywhere and so refuses to uninstall. I had the problem in the first place because when I set up other computer accounts, my Adobe products refuse to operate under them (non-admin account) and recommended uninstalling and reinstalling, a drooling and burdensome process. But I am unable to uninstall all remnants for whatever reasons.
I tried using the adobe clear program too and the same thing occurs and so doesn't complete. I tried removing anything 'adobe' in all my registry files. I tries looking for the msi files that it demands in my installation package to no avail.
Please contact me, Scott Mayers at my account email I provided in my personal account. If there are more than one of me under my name, I'm the one from Saskatoon, Saskatchewan, Canada. It is annoying that I even have to publish this much just to get the help I need. I'm disappointed with Adobe for not giving us appropriate and direct customer help phone numbers when we purchase this at great expense.
Thank you.

I've been corresponding to someone who responded in email and they are only trying to convince me to upgrade to CS6 at a cost to me. I do NOT want to upgrade as I've already spent a large expense on the CS5.5 Master Suite and the Lightroom edition at the same time of purchase. Whoever is responding to me in email appears not to speak English clearly.
I'm using Windows 7 Ultimate and the above apps. As I mentioned to the guy in email, I am having trouble operating my product in non-administration accounts where I prefer to function for security reasons. There, the Adobe products are giving me an "Error 6" and insisting that I uninstall and reinstall again. I assumed that maybe this was due to me setting up my other accounts after I installed the Adobe Suite. I also was moving files away from the C drive in order to secure the files separately.
I tried the uninstalls and most of it worked except for the Adobe Acrobat and other remnants. I managed to remove as much as registry markers of Adobe and then also used the download that Adobe suggested to completely clean all Adobe material. This failed as it keeps looking of msi files in odd locations that don't exist.
I only have three remnants left: Adobe Content Viewer, Adobe Community Help, and Adobe Story. The windows uninstaller will not work nor does the cleaner. These are the indicated problems:
Adobe Content Viewer unable to uninstall.
Windows Installer:
The feature you are trying to use is on a network resourse that is unavailable.
Click OK to try again or enter an alternate path to a folder containing the installation package 'setup.msi' in the box belolw.
Use source:
C:\Users\(main admin account)\AppData\Local\Temp\flaAC337.tmp\
X The installation source for this product is not available. Verify that the source exists and that you can access it.
Adobe Community Help unable to unistall.
C:\Users\(admin)\AppData\Local\Temp\fla7002.tmp\
Same as above but upon clicking okay instead of 'cancel':
!The path 'C\Users\(admin)\AppData\Local\Temp\fla7002.tmp\setup.msi' cannot be found.
Verify that you have access to this location and try again, or try to find the installation package 'setup.msi'
in a folder from which you can install thie product Adobe Community Help. [OK]
Adobe Story
C:....\fla45E6.tmp\
Adobe Widget Browser
...flaBF69.tmp

Email account setup problem with Messages app

Having recurring problems lately with a Rogers pop3 email account not syncing properly in the Playbook Messages app, unless I'm on a wifi connection. Continually tells me it's encountered an unexpected problem connecting to the Rogers server when only bridged through my phone. Is something screrwing up, or is the app designed for wifi only? I don't recall this problem originally.
Also having all kinds of fun setting up the account and having it complete the process properly. It tells me it can't connect with the server/it's not available at this time, blah blah blah. Tried just entering the email address and letting the tablet do its thing; have used multiple settings in the Advanced setup, as verified by using the EVAT tool (though it seems to only have PC, not Playbook options). Again, maybe this is just a wifi-only issue(?), but even on wifi setup seems iffy.
Duh

Rogers has different setting for home and mobile use and it can be painful to deal with
Basically they lock it down for one use or the other and not for both.
It was inteneded to be used only with your home PC and not a mobile device and some ISP have made changes to allow it
POP protocol isnt that robust and if possible use IMAP or better to use exchange active sync if possible (not all ISP use IMAP or EAS)
I gave up on it and switched to outlook.com
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/SMTP-server-issue-with-your-...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Account integration problem with ECC 6.0

Similar Messages

Maybe you are looking for