Account modifier keys and valuation grouping account

Hi Gurs,
How Account modifier keys will create and it will be reflect in obyc settings..
what is valuation grouping account and how it will reflected in obyc settings.
Thanks in advance
suresh

Hi,
How Account modifier keys will create and it will be reflect in obyc settings.. >>>>>>>>>
Account Modification
Key which has a different meaning depending on the procedure. It is used to differentiate account determination. The key's meaning is predefined in the SAP system and cannot be changed.
You can maintain the account mdifier in OMWN transaction agaist the movement type and then you can use it in OBYC for transaction ket GBB for ofset entries.
You can also maitain in account assignment category also .
e.g. for account assignment category you have VBR account modifier and you can change and create your own ZZZ type and use in OBYC.
what is valuation grouping account and how it will reflected in obyc settings. >>>>>>>>>>
Indicates a grouping of valuation areas.
You can maintain it in OMWD transaction to group different valuation area.
Within a chart of accounts, you can use the valuation grouping code
1. to define individual account determination for certain valuation areas ( company codes or plants)
2. to define common account determination for several valuation areas (company codes or plants)
Regards,
Shailesh

Similar Messages

  • Transaction Key/ Account modifier Key

    Hi
    Can any body explain relation :
    NEW material group( Type is ROH)-> new valuation class-> GBB( TRANSACTION KEY)-> VBR( ACCOUNT MODIFIER KEY)-> G/L account
    Significance of them wrt each other and config steps necessary.
    Which transaction key we should select for posting related to newly created material group.
    Say for ROH, Consumables, services etc.
    Regards Komal

    hi,
    1. In Material master, Accounting view we will assign the valuation class,  For material type ( IN OMS2 transaction), we will give Account category referance.
    2. for STock account it is BSX transaction key.
    follow this link:
    http://help.sap.com/saphelp_erp2005/helpdata/en/93/744148546011d1a7020000e829fd11/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/93/744148546011d1a7020000e829fd11/frameset.htm
    hope this may help you,
    Regards,
    Srinivas

  • Account modifier keys description SVN

    Hi Gurus,
    Can any one tell me where  to find  account modifier keys description which are defined for GBB e.g SVN, SXN....etc.
    Is there any table to find.
    Thanks,
    VMPatil

    Go to OMWB and click on GL Accounts button.  In the resulting screen, give your company code and execute.  Here you can find GL account-wise mapping of OBYC with Account keys.  You can find the Account Modifiers with description under GBB keys.
    Find below the full list
    - AUA: for order settlement
    - AUF: for goods receipts for orders (without account assignment) and for order settlement if AUA is not maintained
    - AUI: Subsequent adjustment of actual price from cost center directly to material (with account assignment)
    - BSA: for initial entry of stock balances
    - INV: for expenditure/income from inventory differences
    - VAX: for goods issues for sales orders without account assignment object (the account is not a cost element)
    - VAY: for goods issues for sales orders with account assignment object (account is a cost element)
    - VBO: for consumption from stock of material provided to vendor
    - VBR: for internal goods issues (for example, for cost center)
    - VKA: for sales order account assignment (for example, for individual purchase order)
    - VKP: for project account assignment (for example, for individual PO)
    - VNG: for scrapping/destruction
    - VQP: for sample withdrawals without account assignment
    - VQY: for sample withdrawals with account assignment
    - ZOB: for goods receipts without purchase orders (mvt type 501)
    - ZOF: for goods receipts without production orders (mvt types 521 and 531)
    Ravi.

  • Overhead calculation not happening after using Overhead key and orgin group

    overhead calculation not happening after using Overhead key and orgin group.
    There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
    We want to apply/add Overhead to SFG/FG materials.
    We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
    But our problem is with material standard cost estimate process.
    We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
    In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
    But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
    We have checked all things as mentined below.
    Firstly that the correct costing sheet is assigned to the valuation
    variant.
    That the costing sheet is entered for the appropriate material type:
    Finished and semi finished or material components.
    All of the above can be checked and verified via transaction OKKN.
    In addition make sure that the base value maintained is present in the
    costing, for example the base may include an Origin group, is that
    origin group part of the materials being costed?
    Similarly if the base is found and values exist how is the overhead
    rate of the costing sheet set up, is it valid etc.
    And finally do a similar check for the credit.
    we doubt this as a programm error...
    So, request all experts to have ur feedback..

    Dear,
    Check your origin group & material unit of mesaurement is same.
    some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
    You can see unit of measure for material in Additional data - unit of measure.
    Check BOM component material unit also.
    Check same  unit of measure is maintain in KZS2
    I hope above will useful.
    GOPAN

  • Account type M and G/L account with open item management not permitted

    Hi,
    I am getting the following error while applying VL02N (PGI) is "Account type M and G/L account with open item management not permitted".  Before I got an error like posting period and I have closed those posting periods 2008/08 and 2008/07.   Now I am getting this error. 
    Please provide the solutions to overcome this and I want to execute the full transaction.
    Thanks in ADVANCE.
    Kishore

    Hi Kishore,
    Please check these threads
    Account type M and G/L account with open item management not permitted
    Re: Account type M& GL with open item managment not permitted error
    Posting to G/L accounts with open item management are not permitted
    Hope this would help you.
    Good luck
    Narin

  • Why they deleted my iCloud account? I have an account with yahoo, and removed my account, not reset my password, and do the steps to reset password

    Why they deleted my iCloud account? I have an account with yahoo, and removed my account, not reset my password, and do the steps to reset password, when I put my date of birth does not accept, please i need that account, because I have iphone 4 in that account and I can not activate the iphone

    Hello Jbug0409,
    Welcome to Apple Support Communities.
    It sounds like you’re running into an Apple ID password issue on your iPod touch, and you’ve created another account which you weren’t able to verify because you didn’t receive the verification email.
    Try resetting the Apple ID password for the account that’s already on your iPod touch as shown here:
    If you forgot your Apple ID password - Apple Support
    Also, take a look at this article which provides troubleshooting suggestions that’ll resolve most issues receiving verification emails.
    If you didn't receive your verification or reset email - Apple Support
    So long,
    -Jason

  • Creation of Account payee keys and Table for House Bank

    Hi Gurus,
    Please tell me how to create a Account payee keys what is transaction code for this.And let me know that what is table to check the house Banks.
    Thanks

    I dont think you create payee keys mate, you get that data from your financial institute(bank) and then upload it into your sap system.
    so if I were in your position I would talk to the business user who deals with the bank & bank transfers currently in your client-organisation and ask for that info to be provided.
    from my previous payroll expreience I know the business user for payroll, usually the payroll manager, gets that info for the sap team member and then there should also be a standard upload program to upload all those payee keys into the system.
    cheers

  • I have an account that the email address live, but they stole my account and changed direccionn email to Gmail but now that I have new email in gmail not in me finds the account or reconose me the key and create another account, but the Musia that havi bo

    had a live email account, but the account was stolen and opened an email account in gmail and made the change by hour account but I do not recognize this and create another account with the same email, but in the other account had purchased music, as I can do to recover purchased music.
    The previous Cunta I have it open on a pc but the pc is not mine

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • FS10 (GL Account Balance Display) and FS10N(GL Account Balance Display)

    Hi All,
    when we are using FS10 and we are using layout u2018/VELASCOu2019, then in assignment field we get Customer Number.
    But
    when we are using FS10N and we are using layout u2018/VELASCOu2019, then in assignment field we get NOT GETTING Customer Number, but reference number or document number.
    please can suggest why it is working differently.
    Thanks and Regards
    Reena

    Hi,
    I see that you are using FS10 and FS10N which is for GL account balance display and you are mentioning about Customer Number not being populated in this. I assume you are referring to the drill down line item report since account balance output has not option for changing layout.
    In general coming to the GL line item report and customer number, this field is displayed in the report if the table BSEG is filled for this field. So summarizing, if there is no entry in table BSEG for this Line item there cannot be entry in FBL3N. What you are referring to would be a 'offsetting account' logic. Please check the note 112312 about the 'offsetting account' logic.
    But in your case I see that you are referring to Customer Number being displayed in assignment field, so I guess you are using sort key in master data to fill Customer number.The sort key in the master data of the G/L account fills field BSEG-HZUON.
    Refer note 334466 and 676338 for good info about how zuonr is filled and Please refer to the notes 215798,  984305. They will describe you how to put a special field into the line item display.
    Hope this helps.
    Kind Regards
    Soumya

  • Remapping modifier keys and others via XML .keylayout file

    I have a video editing keyboard that requires some keys to be remapped to work correctly on my mac. Specifically I need to remap the modifier keys on the keyboard. The first thing I need to do is remap key 50 to be command instead of ~. I am trying to do this via a custom XML .keylayout file. I have read the documentation on .keylayout files and can't make sense of what it says to do. Also, I've tried many of the keymapping tools that people have recommended and they don't work for remapping modifier keys.
    Any help with this would be much appreciated. Thanks.

    Hi cstrouse,
    I think you should try the link below and use Ukelele; it does exactly what you need with a gorgeous graphic UI.
    I would'nt mess with XML...
    http://scripts.sil.org/cms/scripts/render_download.php?site_id=nrsi&format=file& media_id=Ukelele_2.2.4&filename=Ukelele_2.2.4.dmg

  • Tables for g/l account, cost element and cost grouping

    Hi Experts,
    I am finding for a table which has g/l account against cost element.
    Finally, I need to find their relevant cost grouping so that I know which g/l account is relevant to the cost group.
    Which table can I find for these information?
    Please help!

    Hi
    The Link between GL & Cost element is not required because GL Account No  = Cost element No
    Cost Ele is stored in CSKA & CSKB Tables.. Cost ele groups are stored in Table SETLEAF
    br, Ajay M

  • Aperture with two Account On MacBook and two Fotostream Accounts

    Is it possible to work on one Aperture Installation on my MacBook (two user-accounts) and sync two fotostreams (2 iphones)?
    If not, how can i be save, that only one iphonesync will be made?
    Thanks a lot for an answer!

    I have even looked for a simple way by
    Applescripting to quickly swap the monitors
    back and forth. I still don't have a good answer.
    That was my second idea...but i am not a developer and so i tried to find a little script an ask in a german forum for a solution for the switch. But no answer so far.
    so we have to hope for version 2.0
    MacPro Mac OS X (10.4.8)

  • OBYC and OB40 - VST Account Key

    Dear All,
    In OBYC we have VST T/E key and G/L account is assigned for posting. IN OB40 also we have VST key with different G/L account.
    What is the difference between these two and when these will get triggered?
    Could you please help me in this regard.
    Rgds
    Raul

    Hi Rahul,
    If you see, the G/L Account maintained at OBYC/VST and OB40/VST are same. Both lead to same G/L account in a scenario where you give a Input Tax in MIRO and tick Calculate Tax.
    The only difference between these two transactions is a Group.
    Different Procedures (Ex. Input tax, Purchase Tax1) in which accounts and/or posting keys are determined for making automatic postings are grouped by business perspective.
    Regards,
    Pravin

  • Group Chart Of Accounts and Group Account Number

    Hi SAP Gurus,
    For the sake of consolidated reporting, we are planning to create group chart of accounts and assign a Group account number to the GL account master. The structure is going to be like this:
    Operating Expenses (Group Account : 461000).
    Air Conditioning Exp   (GL account 461000001)
    Elevators                   (GL account 461000002)
    Coffee and snacks      (GL account 461000003)
    This is being done to achieve a detail level reporting at the company code level and a consolidated reporting at a group level where the reporting would be based on group account or FSIs. We would define a financial statement version based on FSIs.
    My question is : do we need to activate the consolidation (EC-CS) module to push the data to the FSIs or the data would flow automatically to the group account if we assign this to the GL master. If we go to fetch the data from the ECMCT table, do we need to have a consolidation unit?
    Any inputs are highly appreciated.
    thanks
    sri

    Hi,
    There are certain preliminary steps to be carried out in ECCS. You can find them under SPRO->Enterprise Controlling->Consolidation->Integration: Preparation for Consolidation.
    You need to choose the type of consolidation, create Company, link it to Cons Unit in ECCS, Creating/Copying FS Items (each account in Group COA will have an FS Item; 1:1),  etc.,
    After the setup, you actually need to carry out Rollup or Flexi Upload for importing FI data into ECCS FS Items. This is done to Data Monitor - CXCD.
    In ECMCT, typical selections would be Dimension, Cons Unit, Cons COA, FS Item.
    I suppose these preliminary steps are requried for the data to flow to FS Items.
    Hope this clarifies.
    Rgds.

  • Transaction Key and Acct Modifier Key

    In automatic account determination , whats is the difference between transaction key and account modifier key?
    When we need to define account modifier key?
    POINTS WILL BE REWARDED FOR ANSWERS.
    Thanks in advance.

    Hello Venugopal,
    Transaction / Event Key
    Key allowing the user to differentiate between the various transactions and events (such as physical inventory transactions and goods movements) that occur within the field of inventory management.
    The transaction/event type controls the filing/storage of documents and the assignment of document numbers.
    Account Modifier Key
    Account grouping code is only used with offsetting entries (GBB), consignment liabilities (KON), and price differences (PRD).
    Since the posting transaction "Offsetting entry for inventory posting" is used for different transactions (for example, goods issue, scrapping, physical inventory), which are assigned to different accounts (for example, consumption account, scrapping, expense/income from inventory differences), it is necessary to divide the posting transaction according to a further key: account grouping code.
    Hope this helps.
    Regards
    Arif Mansuri

Maybe you are looking for