Account not active or not pending

Hi all
I need to have scenerios and undestanding on the accont not active or not pending and what does it relates in ISU
and what are the tcodes and flow where i need to dig in furthe to have clear picture of same and its implication..
and are we not covering it as part of standard sap functionlaity
regards
Prieti
Moderator note - thread locked, no research
See Help to determine Active and Final Billed Contracts

Hi,
go to trc rsd1, enter the InfoObject 0BUS_AREA.
In the Menu "EXTRAS" select Write transport request.
When propted enter a package and the relevant transportation request (or create one).
Afterwards release the new transport request and import it into the target system. Then try to import the initial request (the one that caused the error) again.
hth
cheers
Sven

Similar Messages

You guys are taking money from my card when I haven't bought anything. last time I bought something was last month and 4.75 is pending from my account. not only that it won't let me update ANY of my apps because I don't have a card number. why do I need

I can't update anything because I don't have a card number I took my card off because you guys took money out of my account and now it's pending something won't tell me what it is but I would like to know what's going on and why money is being taken out of my account when I haven't bought anything in a month ..

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you checked the purchase history on your account ? If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
You can check if you have any auto-renewing subscriptions (and stop them if you do) by following the instructions on this page : http://support.apple.com/kb/HT4098

I literally see email disappearing from my account. not in junk or anywhere most recent was an activation email from wordpress. What is going on? i finally had to make a rule that e from wordpress go to inbox and that worked. why is mac stealing my mail?

i literally see email disappearing from my account. not in junk or anywhere most recent was an activation email from wordpress. What is going on? i finally had to make a rule that e from wordpress go to inbox and that worked. why is mac stealing my mail?

i watched this happen several times...i requested an email notification from wordpress over and over to see if i could click on the email in inbox fast enough to open it before it went to never neverland but nada. could not be done. i turned off the junk mail sorter in preferences. even though it was not to be found in junk mail on my mail app or icloud mail or iphone nada...what else is dissappearing?

Im trying to set up icloud on iphone 4s. when i select icloud in settings it says "account not verified" then a box becomes active saying check mail. I check my mail inbox but theres no activation email?

im trying to set up icloud on my iphone 4s. when i select icloud in settings it says "account not verified" then a box becomes active saying check mail. I check my mail inbox but theres no activation email? any ideas?

Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.

FrameMaker fails today. It says that I'm not connected but my Adobe account is active

Until yesterday everything worked properly.
I try to work with FrameMaker. It says that I'm not connected but my Adobe account is active.
What can I do?
Michel S

Lost your Internet connection? Anti-virus blocking Adobe FM?

Error "Account not found" in Catalog

Hi All!
I have a problem with the catalog of OBI EE.
When connecting to multiple users showed the error "Account not found".
I've located the "Catalog Manager" accounts whose permits were <delete Account>. I deleted those accounts and have been fully rebuilt. These accounts are already functioning.
But to connect to the "Presentation" with the manager and access the option "Manage users and groups" by clicking the link "Show users and groups," again gives the error "Account not found". The log shows:
An error occurred during execution of "connect". No connection could be made Actively Because the target machine refused it.
[Socket: 868]
Type: Error
Severity: 42
Time: Mon Oct 26 13:31:01 2009
File: project / WebSecurity / securitymanager.cpp Line: 84
Properties: ThreadID-6808; HttpCommand-getAccounts; remoteIp-10.12.127.129; User-Administrator
Location:
saw.httpserver.request
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
Account not found.
Any ideas?
Regards.

When you log in into presentation services as administrator, you can still see these users in the user list? You have to delete them not only via the catalog manager, but also overthere.
And restart your services once...
Hope it helps.
Kr,
A

Excise modvat accounts not defined for GRPO transaction and excise group

Dear All,
as per your suggestion i have activated excise Group and series but still showing below error
"Excise modvat accounts not defined for GRPO transaction and 64 excise group"
Kindly Suggest......................
Regards
Vinay

Hi check this path
Spro-Logistic general-tax on goods movement -India-account determination-specify G/L account as per excise transaction
Here check for your excise group,and company code,where account maintain or not for GRPO( goods receipt against purchase order )
Regards
Kailas Ugale
Edited by: kailasugale on May 9, 2011 9:43 AM

ICloud, Settings greyed out - screen that says 'Account not Verified'

Hello, I upgraded my iPhone with latest OS and didn't setup my iCloud upon activation. Now when I go to my Settings and go to iCloud, I get a greyed out screen that says 'Account not Verified' 'Check your email for instructions', but none come??? Can someone tell me how to get it activated any other way?

Hi LindaMurray,
Thanks for visiting Apple Support Communities.
You may find this method helpful for verifying your email address:
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
How to verify the primary email address for your Apple ID
When you first create an Apple ID (using your email address) a verification email will be sent to that address. If you sign in to your Apple ID from the link in that email, the email address will be verified as the primary email address for your Apple ID. You can also resend the email verification if the email address is not verified:
1. Sign in to My Apple ID to manage your account information.
2. Click Resend under Primary Email Address.
3. Verify your changes by following the link in the email you will receive from Apple and signing back in to your account.
Cheers,
Jeremy

TS4002 I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

Hi nguyen trong thang,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are having issues activating your iPhone, you may find the troubleshooting steps in the following article helpful:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Regards,
- Brenden

When I send messages people are receiving them from my email account not my phone number

When I send an iMessage, people are receiving the message from my email that is attached to my apple account, not my phone number like usual. It will occasionally not allow me to send an iMessage either and will force me to send as SMS. Any ideas on how this can be fixed? In my settings it says all new conversations are started with my phone number, but it still doesn't change any ongoing conversations.

Hi ATrunner,
Welcome to the Support Communities! Just so that I can understand your question .... Are you saying that new messages that you send are working correctly with your phone number? It is just the ongoing conversations that are displaying the email? If so, I would suggest starting fresh conversations to those contacts. The article below provides troubleshooting steps for the most common issues with Messages:
iOS: Troubleshooting Messages - Apple Support
http://support.apple.com/en-us/TS2755
iOS: Troubleshooting Messages
Learn how to resolve issues with the Messages app on your iPhone, iPad, or iPod touch. You'll learn what you need to send messages using SMS, MMS, and iMessage as well as how to resolve issues with each method.
Before you start troubleshooting, learn the difference between SMS, MMS, and iMessage. The first step to resolving an issue with iMessage is to update your iOS software and your carrier settings to the latest versions. If iMessage still has an issue, follow the steps below for your issue.
If you can't activate iMessage with your phone number or Apple ID
See how to troubleshoot iMessage activation. If you're using a China Telecom or au (KDDI) iPhone, you can activate iMessage only on your home network. While traveling internationally, you can't activate iMessage.
If you can't send and receive iMessages
You will need these to send and receive iMessages:
An iPhone, iPad, or iPod touch
iOS 5.0 or later
A cellular data connection or a Wi-Fi connection
A phone number or Apple ID registered with iMessage in Settings > Messages
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
If you aren't receiving iMessages across all iOS devices
Go to Settings > Messages > Send & Receive on each iOS device and make sure that you signed in with your Apple ID. You must use the same Apple ID on each device.
Go to Settings > Messages > Send & Receive > You Can Be Reached By iMessage At and make sure that you selected each phone number and email address you want to use with iMessage.
If you linked a phone number to your Apple ID with iMessage and the phone number hasn't appeared, follow these steps.
Sign out of your Apple ID in Settings > Messages > Send & Receive and Settings > FaceTime on all devices.
If you're linking a phone number to an Apple ID, sign in to iMessage on your iPhone first. Then sign in to the rest of your device one by one with iMessage and FaceTime.
If your iMessages didn't transmit as SMS when iMessage was unavailable for use
Go to Settings > Messages > Send as SMS and turn on Send as SMS.
Select your phone number when Sending iMessages in Settings > Messages > Send & Receive > Start New Conversations From.
Make sure that you can send SMS with Settings > iMessage turned off.
If you want to transfer your SIM card or phone number to a device that doesn't support iMessage
Go to Settings > Messages and turn off iMessage if you plan to transfer your SIM card or phone number from an iPhone to a device that doesn't support iMessage. If you don't, other iOS devices might continue to try to send you messages using iMessage, instead of using SMS or MMS, for up to 45 days.
If you can't send and receive SMS
You will need these to send and receive SMS:
An iPhone
A strong cellular network connection through a cellular network provider
A domestic SMS plan from your cellular provider (You might need an international messaging plan to send SMS to an international contact. Contact your carrier for more information)
A roaming SMS plan when you use a cellular provider's network that is different from your billing cellular provider's network (Learn more about roaming and contact your carrier for more information.)
To resolve issues sending and receiving SMS, follow these steps
Go to Settings and turn airplane mode off.
Make sure that you have a cellular network signal in the status bar of your iPhone. If there's no signal, learn more about troubleshooting no service.
Restart your iPhone.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
Remove your SIM card and insert it again.
If you still can't send or receive SMS, follow these steps
Make sure that the contact who's trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that you're using the area code with the contact's phone number. When sending messages internationally, you also need to use the contact's international code.
If you're using a "Pay as you go" SMS plan, make sure it has enough available balance. Contact your carrier if you're unsure of your SMS plan or the available balance.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Back up and restore your iPhone as new.
If your carrier has recently ported your phone number, the porting process might not be complete. Contact your carrier to confirm that the porting process is complete.
Contact your carrier to confirm that you're provisioned for sending SMS and are in an area with cellular coverage.
Contact your carrier to verify there are no blocks or filters placed on your wireless account preventing you from sending SMS.
If you can't send and receive MMS
You will need these to send and receive MMS:
An iPhone 3G or later
iOS 3.1 or later
A cellular data connection (MMS isn't available if you're using only Wi-Fi)
A domestic MMS plan from your cellular provider. You might need an international messaging plan to send MMS to an international contact (Contact your carrier for more information.)
A roaming MMS when using a cellular provider's network that is different from your billing cellular provider's network (Learn more about roaming and contact your carrier for more information.)
To resolve issues with sending and receiving MMS, follow these steps
Go to Settings and turn airplane mode off.
Go to Settings > Messages and turn MMS Messaging on.
Go to Settings > Cellular and turn Cellular Data on.
Go to Settings > Cellular and turn Data Roaming on if you're roaming on a cellular provider network that is different from your billing provider's network.
Make sure that you have a cellular data connection in the status bar of your iPhone.
Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
Make sure that you can send and receive SMS. If you can't send and receive SMS, see the "Issues with sending and receiving SMS" section, above. MMS might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
Restart your iPhone.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
Remove your SIM card and insert it again.
If you still can't send or receive MMS, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Go to Settings > Messages and turn on group messaging if you're sending a group message.
Make sure that you're using the area code with the contact's phone number. When you send messages internationally, you also need the contact's international code.
If you're using a "Pay as you go" MMS plan, make sure it has enough available balance. If you're unsure of your MMS plan or available balance, contact your carrier.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the new contact.
Back up and restore your iPhone as new.
If your carrier has recently ported your phone number, the porting process might not be complete. Contact your carrier to confirm that the porting process is complete.
Contact your carrier to verify that you're provisioned to send SMS and are in an area with cellular coverage.
Contact your carrier to verify that there aren't blocks or filters on your wireless account preventing you from sending SMS.
Your carrier might require modified APN settings to use MMS.
Further troubleshooting and information
Follow these steps if you can't deactivate iMessage or if you can't send SMS to non-iOS devices because they are sent as iMessage.
Get help if some of your SMS messages aren't displaying correctly.
Follow these steps if you're receiving SPAM in Messages.
Japan: Follow these steps if incoming MMS are received as group MMS.
Important: Mention of third-party websites and products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the selection, performance or use of information or products found at third-party websites. Apple provides this only as a convenience to our users. Apple has not tested the information found on these sites and makes no representations regarding its accuracy or reliability. There are risks inherent in the use of any information or products found on the Internet, and Apple assumes no responsibility in this regard. Please understand that a third-party site is independent from Apple and that Apple has no control over the content on that website. Please contact the vendor for additional information.
Last Modified: Oct 2, 2014
I hope this information helps ....
- Judy

Why systems support inventory account, not purchase account ?

Dear Sir,
Kindly explain the LOGIC behind system supporting stock account instead of purchase account.
Thanks in anticipation
Regards
Chirag Shah
+91 98202 72322

Hi:
Please adhere to forum rules of engagement ..Do not write cell phone number in your post or private information. Coming to your query please note that SAP provides 3 way processing to goods procured through MM....
This is done based on GR based invoice verification concepts. Upon purchase of goods impacts are generated in FI at the time of MIGO ..Stock Dr and GRIR clearing A/C Cr...Here stock account is debited. Purchase account can be used provided purchase based accounting is active in your system. In 2nd step MIRO or invoicing is done which clears the GRIR Account by debiting it and Generating liability for vendor by crediting it. Lastly you pay off your liability manually or through APP.
Regards

When trying to update, I get the message: Account not in this store,...switch to the Canadian store. How do I do that?

When trying to update apps, I get the message: "Account not in this store,...switch to the Canadian store before purchasing" How to I switch, and how did it even get changed to US store? I don't remember changing anything, and I used to be able to update, no problem.. I have synced with my computer for music - could it have happened then? I changed on the computer to Cdn site, but will it not go to the iPhone automatically?

On you iPhone go to settings-iTunes & AppStore.
Tap user name, sign out.
Log back in with your apple ID and password.
That should fix the problem

Whenever I updated or downloaded a new app from the App Store, a message appears saying: "Account Not In This Store Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing." I made some research onl

Whenever I updated or downloaded a new app from the App Store, a message appears saying:
"Account Not In This Store
Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."
I made some research online and asked a few of my friends with the same problem. All they did was sign out of iTunes from settings>iTunes & App Stores or from the App Store itself and signed back in. It worked for many of them but not with my iPhone 4s. It really does get on my nerves to always sign out and back in to the App Store as it sometimes works and allows me to update and download or most of the time it doesnt.
When viewing my Apple ID account on my iPhone (after entering the password) it either views my account or says:
"This Apple ID is only valid for purchases in the U.S. iTunes Store. You will be switched to that Store. Try your purchase again."
So I press on OK then either switches me to the App Store app of its choice, or says "Cannot connect to iTunes Store".
I tried restoring iOS6 hoping it was a bad installation, but i still have the same problem.
Can anyone help me please?
Arian

Are you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
If you keep encountering problems contact iTunes support. They will help you sort it out.

Why do I get the message when I try to purchase an app or song on itunes using my iPhone5? "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to the New Zealand store before purchasing."

When I try to buy either an app or a song via iTunes, I have just started getting the following message and I am unable to change the store location. "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to the New Zealand store before purchasing."
This problem has only just started happening. I am on an iPhone5 iOS 7.0.4.
Very frustrating. Can someone please tell me why & where the change has occured and how to fix it? In the past I have purchased many apps and songs on itunes and never had this problem.
Thanks a mill :-)

Click here and follow the instructions to change the iTunes Store country.
(97125)

How to clear line items in accounts not managed on an open item basis

We are getting ready to archive FI accounting documents from years 1993-2002. We encountered a great deal of documents that did not archive during testing because the documents have open items. We were given bad advice in the beginning on how to set up accounts. Several accounts were not set up on an open item basis and these accounts will not get archived until the line items are cleared. We have set up new accounts to replace these accounts that are now being managed on an open item basis. Our FI users are unable to clear the documents using F-03. Does anyone have a way of clearing these type of documents (not managed on an open item basis)? Thank you in advance.

One of our users has proven that the line items on GL accounts not managed on an open item basis are not holding up the archiving. The reason for many documents not archiving is that the item posted to the vendor is still open.
thanks!

Account not active or not pending

Similar Messages

Maybe you are looking for