Account Posting Error

Hi,
On posting my billing document to accounting I am getting an ABAP runtime error "GETWA_NOT_ASSIGNED_RANGE". As I understood it, it was to do with number range assigment for accounting document. But I have already assigned number ranges to my a/c docs(1, 14 and 49 -as I was asked by system). Moreover, with the same configuration I used to post the billing to accounting successfully. What could have gone wrong? Any suggestions please? Thanks in advance.

Dear Narendra
This is bcoz Account Assignment Group was not flowing in billing and hence the error.  First check in customer master whether you have maintained the Account Assignment Group and if so, check in billing document at header level.
thanks
G. Lakshmipathi

Similar Messages

  • GL account posting error with cost centre

    Hi experts
    I am trying to post Goods issue with the combination of GL account and cost centre...
    The system throwing an error message saying " GL account XXXXX not valid for cost centre XXXXX or order entered"
    what could be the mistake i have done... kindly reply
    Thanks
    Alex

    Hi
    Z message means you have a custom validation in Place
    Go to OB28 and check which validation is causing this issue..
    you need to either change it so that this posting goes through or use a proper GL account in accordance with the validation
    Regards
    SAPFICO

  • Balance in transaction currency (Accounts Posting error)

    Dear All,
    I got the below mentioned error message while, I am trying to post a invoice to accounts. Can anyone could help me in this context,
    Thanks & Regards,
    Dilip
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount '        13,395.00-' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.

    Dear Dilip Kumar
    Goto SPRO --> Logistics General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Excise Registration.   Select the respective excise registration and go into that by clicking the lens on top.
    Here check whether a tick mark is appearing in "Excise Registration is Liable to AT1".  If not, put a tick mark and then generate invoice.
    thanks
    G. Lakshmipathi

  • GL account posting - Error

    we are having problem in GL account with incorrect value posting for ED payable.
    we have created a PO (STO) against which we made GR. After that invoice is posted.
    The ED payable in invoice (in conditions) is Rs.17,919/-. But in accouting document (in ED payable GL account (fbl3n)), the amount was Rs.4,592/-.
    I was confused how come this difference.
    Could any one help me in this regards?..
    Regards,
    S.Sridhar

    Dear Rajesh,
                  I already checked the currency. It was same (INR) in all documents.
           Is there any other solution??..
    Regards,
    S.Sridhar

  • Error when creating Final Accounting Post to GL in AR

    Hello,
    I currently getting an error while creating Final Accounting Post to GL
    I have changed the Profile Option SLA: Enable Trace to <null> as mentioned in the solution on metalink. But still I'm getting this error.
    If anyone has encountered the error(LOG) below; please reply me as soon as possible
    thanks
    mevin
    THE LOG
    Subledger Accounting: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XLAACCPB module: Create Accounting
    Current system time is 14-AUG-2009 09:36:54
    XDO Data Engine Version No: 5.6.3
    Resp: 50832
    Org ID : 102
    Request ID: 499751
    All Parameters: P_APPLICATION_ID=222:P_SOURCE_APPLICATION_ID=:P_DUMMY=:P_LEDGER_ID=2089:P_PROCESS_CATEGORY_CODE=:P_END_DATE=:P_CREATE_ACCOUNTING_FLAG=N:P_DUMMY_PARAM_1=:P_ACCOUNTING_MODE=:P_DUMMY_PARAM_2=:P_ERRORS_ONLY_FLAG=N:P_REPORT_STYLE=D:P_TRANSFER_TO_GL_FLAG=Y:P_DUMMY_PARAM_3=:P_POST_IN_GL_FLAG=Y:P_GL_BATCH_NAME=:P_MIN_PRECISION=2:P_INCLUDE_ZERO_AMOUNT_LINES=:P_REQUEST_ID=:P_ENTITY_ID=118514:P_SOURCE_APPLICATION_NAME=:P_APPLICATION_NAME=:P_LEDGER_NAME=:P_PROCESS_CATEGORY_NAME=:P_CREATE_ACCOUNTING=:P_ACCOUNTING_MODE_NAME=:P_ERRORS_ONLY=:P_ACCOUNTING_REPORT_LEVEL=:P_TRANSFER_TO_GL=:P_POST_IN_GL=:P_INCLUDE_ZERO_AMT_LINES=:P_VALUATION_METHOD_CODE=:P_SECURITY_INT_1=:P_SECURITY_INT_2=:P_SECURITY_INT_3=:P_SECURITY_CHAR_1=:P_SECURITY_CHAR_2=:P_SECURITY_CHAR_3=:P_CONC_REQUEST_ID=:P_INCLUDE_USER_TRX_ID_FLAG=:P_INCLUDE_USER_TRX_IDENTIFIERS=:P_USER_ID=:DebugFlag=
    Data Template Code: XLAACCPB
    Data Template Application Short Name: XLA
    Debug Flag:
    {P_ACCOUNTING_REPORT_LEVEL=, P_DUMMY=, P_ACCOUNTING_MODE_NAME=, P_ERRORS_ONLY_FLAG=N, P_REPORT_STYLE=D, P_GL_BATCH_NAME=, P_END_DATE=, P_SECURITY_INT_3=, P_SECURITY_INT_2=, P_SECURITY_INT_1=, P_VALUATION_METHOD_CODE=, P_POST_IN_GL=, P_TRANSFER_TO_GL=, P_TRANSFER_TO_GL_FLAG=Y, P_INCLUDE_USER_TRX_IDENTIFIERS=, P_USER_ID=, P_PROCESS_CATEGORY_NAME=, P_ERRORS_ONLY=, P_DUMMY_PARAM_3=, P_SECURITY_CHAR_3=, P_DUMMY_PARAM_2=, P_SECURITY_CHAR_2=, P_DUMMY_PARAM_1=, P_SECURITY_CHAR_1=, P_ENTITY_ID=118514, P_PROCESS_CATEGORY_CODE=, P_INCLUDE_ZERO_AMT_LINES=, P_LEDGER_ID=2089, P_POST_IN_GL_FLAG=Y, P_APPLICATION_ID=222, P_INCLUDE_USER_TRX_ID_FLAG=, P_APPLICATION_NAME=, P_REQUEST_ID=, P_CONC_REQUEST_ID=, P_LEDGER_NAME=, P_SOURCE_APPLICATION_ID=, P_CREATE_ACCOUNTING=, P_CREATE_ACCOUNTING_FLAG=N, P_MIN_PRECISION=2, P_SOURCE_APPLICATION_NAME=, P_INCLUDE_ZERO_AMOUNT_LINES=, P_ACCOUNTING_MODE=}
    Calling XDO Data Engine...
    [081409_093744202][][EXCEPTION] SQLException encounter while executing data trigger....
    java.sql.SQLException: ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_create_acct_rpt_pvt.BeforeReport . ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_accounting_pkg.accounting_program_document. ORA-01086: savepoint 'SP_EVENTS' never established
    ORA-20001: -: XLA-95103: An internal
    ORA-06512: at "APPS.APP_EXCEPTION", line 72
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 110
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 289
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 162
    ORA-06512: at "APPS.XLA_CREATE_ACCT_RPT_PVT", line 262
    ORA-06512: at line 4
         at java.lang.Throwable.<init>(Throwable.java:57)
         at java.lang.Throwable.<init>(Throwable.java:68)
         at java.sql.SQLException.<init>(SQLException.java:55)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
         at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:215)
         at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:965)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1170)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3339)
         at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3445)
         at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4394)
         at oracle.apps.xdo.dataengine.XMLPGEN.executeTriggers(XMLPGEN.java:699)
         at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:255)
         at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:205)
         at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:237)
         at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:364)
         at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
         at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:293)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
    Start of log messages from FND_FILE
    14-AUG-2009 09:37:19 - Beginning of the Report
    GL Inerface tablename = GL_INTERFACE
    GL Inerface tablename = GL_INTERFACE
    tablename = GL_INTERFACE
    14-AUG-2009 09:37:19- Submitting the Journal Import
    GL Inerface tablename = GL_INTERFACE
    GL Inerface tablename = GL_INTERFACE
    tablename = GL_INTERFACE
    14-AUG-2009 09:37:19- Submitting the Journal Import
    14-AUG-2009 09:37:44- Journal Import completed
    ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_create_acct_rpt_pvt.BeforeReport . ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_accounting_pkg.accounting_program_document. ORA-01086: savepoint 'SP_EVENTS' never established
    ORA-20001: -: XLA-95103: An internal
    ORA-06512: at "APPS.APP_EXCEPTION", line 72
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 110
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 289
    ORA-06512: at "APPS.XLA_EXCEPTIONS_PKG", line 162
    ORA-06512: at "APPS.XLA_CREATE_ACCT_RPT_PVT", line 262
    ORA-06512: at line 4
    End of log messages from FND_FILE
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 14-AUG-2009 09:37:45
    ---------------------------------------------------------------------------

    select * from gl_je_sources_tl;
    main columns to look at are:
    IMPORT_USING_KEY_FLAG
    je_source_name
    je_source_key
    user_je_source_name
    select * from gl_je_categories;
    main columns to look at are:
    je_category_key
    user_je_category_name
    If import_using_key_flag is Y for your je_source (Receivables), for the application (222) you are running Create Accounting in Final Post Mode, then apply the patch 8568620
    By
    Vamsi

  • Invalid Account Code error when posting AP Credit Note

    Dear Experts,
    I hit this error message when posting an AP Credit Note based entirely on an existing AP Invoice (nothing was changed in the credit note).
    Invalid Account Code [Message 173-9]
    I have found 2 notes, but I dont think they're relevant
    [Note 1311905|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001311905]
    [Note 1286288|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001286288]
    Please help!
    Warmest Regards,
    Chinho

    Dear All,
    I found the solution!
    In my AP Invoice, there was a Rounding amount, but when I copied over to AP Credit Note, the system unusually set the Rounding amount as $0.00 and copies the Rounding amount to the Discount field instead.
    **The "Invalid Account Code" error happened because I did not set GL account determination for discounts scenario.
    So what I did was I cleared the Discount field in the Credit Note, and enter the rounding figure into the Rounding field again. Then, the AP Credit Note was able to go in Successfully!
    Thanks guys.
    Warmest Regards,
    Chinho

  • General Ledger Posting Error (GLT2 051) No accounting transaction variant

    Hello SAP Gurus-
    When testing lockbox in FLB2, I received the following error message:
    General Ledger Posting Error (GLT2 051) No accounting transaction variant assigned to FB01/  /LB
    We are on ECC 6.0
    I created a new Document Type LB
    I created a new G/L account for Lockbox clearing and AR
    How do I fix this?
    Thank you!

    Hi,
    Assign a transaction variant for the document type you created in  Transaction code GSP_VZ3. Also, make sure that the GL accounts affected are assigned with item categories in GSP_LZ2.
    Thanks
    Aravind

  • Error Message at F-02 "Enter Name & city for One-time account posting"

    While create JV in one time customer ledger through F-02, following error message appeared & system not allow to crate JV.
    "Enter Name & city for One-time account posting", Please help
    Regards
    BK GAIKWAD

    Hi
    Are you having separate account group for this One time vendor?
    Via this account group, the vendor-specific fields, such as name, address, and bank address data should be changed from suppressed to display when you enter the vendor master record. You need to enter this data when you enter the document.
    Check the fields status of Name, city etc in the below path
    SPRO - Financial Accounting - Accounts receivable and accounts payable - Vendor accounts - MAster data - Preparations for creation of master data - Define account group with screen layout
    Regards
    Malathi

  • Error in BAPI for salary account posting

    Dear Experts,
        I am developing and report for salary account posting whrere i am using a bapi called BAPI_ACC_DOCUMENT_POSTING. Which require RFC destinetion of the target system where the document should post in its import parameters.But m not passing anything thr and its automatically taking an rfc destinatin.But while i try to run this report document is not posted and in its return table 2 error msgs comes
    1. Error in document: BKPFF $ CLNTD11320
    2. FI/COinterface: Line item entered several times
       Pls provive me input if any one has come across this error.
    Thanks

    Line item passed to the vendor and gl tables of the bapi cannot be same.ie. if vendor table contains 3 entry with line item 1,2,3 gl should contain line item starting from 4.Line item field cannbe field manually using a count variable.

  • Account determination error in FI doc during SD billing doc posting.

    hi,
    when I create one billing doc ref to s/o,
    I check account determination in condition type:
    G/L account no.: 110000
    Provision acc.   : 120000
    in FI doc,
    should debit 110000 and credit 120000
    but current status is credit 110000 and debit 120000
    Please help.
    Thanks.

    Hi,
    One of the following could be the reasons for the Account determination error.
    Please check.
    1.Incorrect account assignment group entered in the customer and material master
    Resolution:Maintain correct account assignment group in customer and material master,Eg.External Domestic,Z1 - External Foreign,Internal Foreign,etc,.
    2.GL account not extended to the respective company code.
    Resolution:Extend the required GL account to the company code.
    Regards,
    Sophia Xavier

  • Account determination error in Invoice document posting

    Problem - When generating the invoice document to customer, an error is displayed - Document is saved (Account determination error). As a consequence of this step, the invoicing is not able to create FI document
    My Analysis-
    Account determination is done in G/L account assignment (VKOA screen)
    For my billing document, the system is not able to find the GL account (below are screenshots)
    In VKOA screen, I already defined the GL account determination using KOFI procedure.
    I initially defined in table 2 Cust.Grp/Account Key and it didnt work.
    So I defined in both the tables 1 as well - Cust.Grp/MaterialGrp/AcctKey
    But still system is not reading the tables and obtaining the GL account no
    Any advice on why its not working?

    Hi Nikhil,
    As per the screen shots i could observe that you didn't maintained acct asst grp of customer.
    check the acct asst grp of customer field in billing tab is maintained or not.
    other possible reason may be in your pricing procedure -check whether the accounting keys are maintained or not.
    This could solve your issue.

  • G/L Account blocked Error while posting goods delivery in VL02n transaction

    Our Requirement is to change the G/L account which is  proposed by  OBYC(automatic account determination ) as per the movement  typ and order reason from a Ztable. We need a place to code this logic before this OBYC check happens due to which we getting the account blocked error.
    Please suggest some user exit or enhancemnet point where we can place this logic.

    hi Ramki.,
    I had configured  a Surcharge on delivery in the condition type to be calculated on the qty delivered. Say for every Gallon, a surcharge of 0.2 cents is charged. I had maintained ths surcharge as a separate condition type and assigned it to a separate G/L a/c.
    Now during PO creation, in the header , the price remains the same as i give for the Unit price.
    IN the conditions tab in Item level, the surcharge is added on to the gross price and i get a Net Price.
    Without saving the PO, when i go to see the Print-preview, i see only the Gross price.
    After saving the PO, in print review, i see
    1. Unit gross price under Sl.No.1
    2. After the Item description, immediately, there is qty ordered x unit price + surcharge and them following  Nett price
    3. At the bottom right corner of the PO, i get qty ordered x unit price only . Surcharge amount does not appear.
    How do i get the Total Nett price i.e qty ordered x unit price + surcharge to appear on the bottom right of the PO.
    Is it a standard functionality for the Total price to appear or does it involve the role of ABAP programming.???
    Do clarify my doubts
    Tx
    MahesH

  • Account determination error in Billing

    Dear Expert,
    I create one billing doc(1840000318) based on SO:1810000296. But in the posting status it is showing "Posting document not created(account determn error) in billing. I did not found any FI relavant docs for this billing in open item customer list.
    *Anyone can advice me why the FI docs not created automatically..???
    **Do you think there any missing configuration set?
    ***Or if I cancel the billing docs then it will okay or not ?
    Thanks & b.Rgds
    Bishnu

    Hi Bishnu,
    Check Points for Account Determination.
    1. Ensure Cutomer master (Xd02)Sales Area Data- Billing Tab-- Acc Assign Grp  ---Should be maintained
    2. Material Master -
    Sales Org-2----
    Acc Assign Grp..Should be maintained.
    3. In VKOA maintain
    Application- V Chart of Accounts--Sales Org ---Acc Assgn Gp Of Cust -Acc Assgn Gp of Material-Acc Keys (ERL,ERS,ERF)----& G/L Account.
    4. In ur Pricing Procedure i.e V/08... Maintain Reqt -2 corresponding to ERL,ERS,ERF. & Subtotal =9 in front of net total.
    Revert  for further clarification.
    Regards
    Amit Gupta

  • Account Determination error while goods receipt

    I am trying to receive a Purchase order thru MIGO transaction. I got an error message saying "Account Determination for entry IPGL FR1 0040 not possible".
    This error message came only when i had "FRB1" condition type in Purchase Order Conditions. Without FRB1 condition type in conditions i am able to receive the Purchase Order thru MIGO.
    IPGL is the chart of accounts in our company.
    What is FR1 in the error message ?
    What is 0040 ?
    What is the connection between condition type FRB1 and Account determination?
    What do i need to do to fix the issue?
    I greatly appreciate any help from you guys.

    Prashanth,
    I would encourage you to search the forum before posting any question (if you have the time, interest etc). It is likely that youu question (or a similar question) would have been answered previously.
    Please search the forum with 'account determination error' for instance. I get 11 hits. You can try searching with other similar terms. Read the hits and then come back if you still have questions.
    I don't intend to be unhelpful but I felt the need to point this out (although most people don't seem to care).
    H Narayan

  • Account Determination Error - Discounts - ERS

    Dear All,
    When I am releasing my Billing Document, I am getting the "Account Determination Error".
    My Requirement: Sales Discounts should not post to ERS Account Key.
    Price          -     PR00 - 10000 ERL GL Account (10000)
    Discount    -     K004 - 10%
                                         900
    Base Price                   9, 100 INR  
    In the Accounting ENtry - it has to show only Customer Account 9100 Dr to Sales Revenue A/c 9100.
    I don't want to show Sales Discount 900 Rs.
    For this in pricing procedure configuration - i have removed ERS Act key (for not posting), becoz of this - I am getting the Account Determination Error.
    Any Idea on How to Configure the above scenario?
    Ganesh Varma G.

    In pricing procedure
    MAINTAIN SUBTOTAL CONDITION AFTER DISCOUNT IN PRICING. MAINTAIN THE DISCOUNT CONDITION AS STATISTICAL.
    MAINTAIN ACCOUNT KEY ERL FOR SUBTOTAL.
    STEP  COND TYPE                FROM             TO         STAT     ACCT KEY
    10       PR00                                                                             -
    20       K004                                                                 X          -
             price after discount      10                  20                        ERL

Maybe you are looking for

  • Java Jars And Packages

    I was just wondering if there was a way to create a jar file containing a custom library of classes that you could import packages from? I know you can setup a jar so that it will automatically run a program when you double click it - but is there a

  • PSE 12 Uninstall?

    I purchased PSE 12 several months ago.  It became corrupted (PSE 12 Organizer continually freezes) so I did an uninstall.  How do I download a replacement?  I still have the original software license key.

  • Viewing photos in the Filmstrip

    This question was posted in response to the following article: http://help.adobe.com/en_US/lightroom/using/WS45EA239A-7EEE-46ef-889F-EF064422BCD3.html

  • Need to change passwords, Unity, IPCC and CCM

    I need to change the admin passwords on all servers. What, if anything, can I expect to break. Thanks

  • Delete element in 1D array

    Hi.. I have 1D array. i want to delete an element that have 0 value in 1D array. so how can i do that? Attachments: delete array.vi ‏6 KB