Accounting document date should be current date

Hi,
When i am releasing a invoice to accounting , accounting document date is billing date not current date
i need acc doc date should be the date when invoice is released .not billing date how can i configure this

HI,
I am not getting your business requirement here, Where as logically it should be same as Billing date and accounting document date.
because some times the billing date and the billing creation date may change. in that case it may be difficult you to prove the accounting document date.
for Eg.  you billing creation date is 30.01 .2013
and your billing document date is 05.02.2013
if you posting the accounting document in 01.02.2013, and you need to  the accounting document date should be 01.02.2013  , then it is logically not valid.
So if you need to find the exact date for accounting posting then you can refer the "posting date field" , that means (
Date which is used when entering the document in Financial Accounting or Controlling)
Hope it ll help you to understand.
Else you have to use any user exit to do so.
Regards
Pitabash

Similar Messages

  • Billing Date should be Current Date

    Hi experts,
    At present , system takes billing date from PGI document.  However this field is editable at the bill of billing ( VF01 ).  User can change it.  Our requirement is as under :
    We want the same to be made non editable OR it should pick up the current date but not future date.
    Kindly suggest how it is possible.
    Regards
    ( Rajneesh Gulati )

    This is Material management froum,any way,Use transaction variant(SHD0) to display billing date as non editable in VF01(By standard If u don't enter billing date it will take current system date as default,Billing Date is determined based on Invoicing date in Customer master Sales area billing tab).

  • Date rule for current date

    Hi.
    I have a date type for which I would like to fill DATE FROM field with current date, but the field DATE TO should stay empty for manual entry.
    I defined the following rule which I assigned to my date type but the problem with this rule is that it fills both fields (date from and date to) with current date.
    <?xml version="1.0"?>
    <TimeRule>
       <TimeRuleSource>
          <ruleline>
             <AssignTimeExp displaytype="AssignTime">
                <VarTimeExp displayType="VarTime"
                            name="RESULT"
                            position="F">
                </VarTimeExp>
                <ConstLocTimeExp displaytype="ConstLocTime"
                              date="now"
                              time="000000"
                              timeunit="DAY">
                   <VarObjectExp displaytype="VarObject" name="SYSTEM"/>
                </ConstLocTimeExp>
             </AssignTimeExp>
          </ruleline>
       </TimeRuleSource>
    </TimeRule>

    solved by other way

  • Is there any way we can set default value for a Date Attribute to current date in Master Data Services

    Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
    I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
    Thanks.

    Hi Anagha,
    So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
    1. Add buisness rule which can set a default value when Date = NULL/Blank
    2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
    3.Go to that table and add a after update trigger like
    if uda_<entityid>_<attributeid(Date attribute)> = default value
    update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
    I will check on this too from my side.
    By the way AFAIK i dont think so calendar control integration is possible .

  • Planned date should be revision date.

    I want to create a Preventive maintenance plan in such a way that all the planned dates should be revision date.
    Thanks in advance for for kind answer

    Dear,
    what do you mean by revised date...do you mean reschedule?
    then please proceed as below
    When you create a PM order in the system condition field enter = 1 opeartion taken into account.
    Then when you run MRP and in the capacity planning table you can see the order load, then you can reschdule all the order in that WC colllectively

  • Can't get access in Time Machine to certain folders for any date earlier than current date/time.

    Can't get access in Time Machine to certain folders for any date earlier than current date/time, even when entering as Admin. Why do certain folders have small red "-" badge in lower right corner of folder icon?  Here's a picture of the dilemma:
    I've tried monkeying with priveleges using Command I, and changing users, but to no avail.  Can anyone help?

    Right.  Here's what the permissions look like from the Finder Command I:
    I'm not sure what "Custom" means, but when I then try to change it to "Read & Write", it doesn't take.... just comes back as Custom. Interesting to note that not only am I logged into Joan's account where the data folder and file lives) to do this, but when I do it from my own account  as Admin (dunc...mpster) I get the same result.

  • After updating new MIC in QP02 in Back date not showing current date ?

    Hi Guru,
    I have updated some new MIC and some Changes are made in existing MIC in QP02 on back date. It is showing on same back date with all correction and new MIC but on today's date i.e. current date it is not showing in the system.
    any can help me how to get in current date ?
    There are some dump error , for these correction i have updated SNOTE 1467234 and 1471534 in Quality server, but no more effect.
    Thanks,
    Piyush Patel

    hi,Premji,
    I have updated existing QP in back date i.e. same as when created original date ( expiration date is long i.e. 31.12.9999) , then same thing i wanted to see all updated MIC should be reflect in current date, but it is not coming, so i have updated SNOTE- 1467234 and 1471534 then tried it.It is working fine some how but not as i want.Hence i thing it is solved my problem.
    Thanks to you and Mr. Craig for your more suggestion/guidance.
    Piyush Patel

  • Error In Backdated Reservation Creation  Base date earlier than current dat

    Dear Experts,
    Error while creating Reservation for back date.
    Base date earlier than Current date.
    Can we create backdated reservation ? and post goods issue to the same ?
    if it need configuration please explain the steps for allowing creation of backdated reservations.
    Thanks in Advance

    What is the error message nos.?

  • If there is no accounting document; SAP should not allow users to print

    Dear Gurus,
    Is there a standard way that,
    --if there is no accounting document; SAP should not allow users to print invoice?
    How can I do it?
    Regards,

    You can either use Tcode NACE for output procedure pr follow following path in SPRO:
    IMG - SD - Basic Functions - Output control - Output Determination - Maintain Output Determination for Billing Documents - Maintain Output Determination Procedure
    There for your output procedure used for the desired output type maintain requirement routine as 62 : Billing doc released to acctng.
    This requirement is met if the billing document is complete checking the header, pricing, and all items and has already been passed to financial accounting. The requirement also checks that the document is not relevant for an invoice list. This requirement can be assigned to billing document output condition types that should only be processed when the billing document is complete and forwarded to accounting. This requirement can only be used with billing documents.
    Regards
    JP

  • Cheque date should be due date on which invoice are due.

    Dear Experts,
    We are making payment through F110. Now we are planning to run  Automatic cheque printing two times in a month instead of daily.
    But cheque date should be due date on which invoice are due.
    Is it possible to do so, Please advice.
    Thanks in advance,
    Maurya shantanu

    Hello Maurya,
    Yes you can have the cheque date as due date provided you have one check for all invoices with same due date.
    You can discuss with your ABAPer advicing him to pick the date for the check from the invoice due date filed.
    regards
    pbb

  • Exit/BADi for ml81n to check GRN date should be PO Date.

    Exit/BADi for ml81n to check GRN date should be > PO Date.Kindly suggest .

    Hi,
    You can achieve it using the below enhancement.
    Enhancement: SRVEDIT
    Function module: EXIT_SAPLMLSR_001
    Regards,

  • Last month end date based on current date

    Hi,
    How to show last month end date based on the current date.
    Eg:
    Current date = "08/26/09"
    Var- Last Month End Date = "07/31/09" etc...,
    Please help me how to get it...
    Thank You!

    Good to hear that it worked for you. but not for me.
    I tried like this:
    1st::
    1. var1= ToDate("06/30/09","MM/dd/yyyy")
    2.Var2= RelativeDate([Var1];-DayNumberOfMonth([Var1]))
    result: 5/30/09
    2nd:
    RelativeDate('6/30/2009';-DayNumberOfMonth('6/30/2009'))
    result: 5/30/09
    Am working on SAP OLAP cubes.
    Please help me where am going wrong....
    Thank You!

  • FM to get previous sunday date based on current date(SY-DATUM)

    hi all,
    Is there any function module to get the previous sunday date based on current date(sy-datum)?
    Regards,
    Kapil Sharma

    Hi Kapil,
    You can follow the logic below:
    data:
    l_date like sy-datum, **TODAY
    l_date2 like sy-datum, **Previous Sunday
    data:
    l_daynr like HRVSCHED-DAYNR.
    *Get today's date
    l_date = sy-datum.
    *Gey today's day (Monday, Tuesday, etc.)
    CALL FUNCTION 'HRIQ_GET_DATE_DAYNAME'
    EXPORTING
    langu = 'EN'
    date = l_date
    IMPORTING
    daynr = l_daynr.
    CASE l_daynr.
    *If it is Monday
    WHEN 1.
    -Subtract 2 days for the previous Sunday
    CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
    EXPORTING
    id_date = l_date
    id-operator = '-'
    is_duration = 2
    IMPORTING
    ed_date = l_date2.
    *If it is Tuesday
    WHEN 2.
    CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
    EXPORTING
    id_date = l_date
    id-operator = '-'
    is_duration = 3
    IMPORTING
    ed_date = l_date2.
    *If it is Wednesday
    WHEN 3.
    CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
    EXPORTING
    id_date = l_date
    id-operator = '-'
    is_duration = 4
    IMPORTING
    ed_date = l_date2.
    *If it is Thursday
    WHEN 4.
    CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
    EXPORTING
    id_date = l_date
    id-operator = '-'
    is_duration = 5
    IMPORTING
    ed_date = l_date2.
    *If it is Friday
    WHEN 5.
    CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
    EXPORTING
    id_date = l_date
    id-operator = '-'
    is_duration = 6
    IMPORTING
    ed_date = l_date2.
    *If it is Saturday
    WHEN 6.
    CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
    EXPORTING
    id_date = l_date
    id-operator = '-'
    is_duration = 7
    IMPORTING
    ed_date = l_date2.
    *If it is Sunday
    WHEN 7.
    CALL FUNCTION 'HR_SEN_CALE_DAYS_DATE'
    EXPORTING
    id_date = l_date
    id-operator = '-'
    is_duration = 8
    IMPORTING
    ed_date = l_date2.
    ENDCASE.
    Regards,
    Dilek

  • FM to get the previous sunday date based on current date(sy-datum)

    hi all,
    Is there any function module to get the previous sunday date based on current date(sy-datum)?
    Regards,
    Kapil Sharma
    Moderator Message: Basic date related questions are not allowed
    Edited by: Suhas Saha on Sep 19, 2011 11:39 AM

    Hi,
    There are function modules to find out the current day of the week depending on sy-datum. These are as below:
    1. DATE_COMPUTE_DAY - Returns a number indicating what day of the week the date falls on. e.g. Monday is returned as a 1, Tuesday as 2,...., Sunday as 7.
    2. RH_GET_DATE_DAYNAME  - Returns the day based on the date provided, e.g. Monday, Tuesday,..., Sunday.
    Using any of the above, if you can find out the current day, then you can calculate and compute the date of the previous Sunday.
    My observation is that using the first FM might make the calculation simpler.
    Hope this is of help to you.
    Regards,
    Shayeree

  • Accounting document generated even if foreign data incomplete

    Hi,
    I did the customizing for foreign trade data and I created an incompletion procedure (VI29) for some data like Commodity code, Country of destination, statistic value.
    I have to create a billing document (export from Italy to France) and my expectation is that the incomplete document doesn't generate the accounting document.
    The system's behaviour is strange since if I see the billing document with VF02 the document is incomplete and the message VF074 compares but the document goes through accounting.
    Do you have any ideas about the cause?
    Many thanks
    Angelo

    Hi,
    Perhaps you are using an enhancement to avoid the check. Read the SAP Note 173411 - Incompletion procedures for foreign trade and related notes for a futher info.
    Regards
    Eduardo
    PD: I forgot this note: SAP Note 908748 - Cancellation document: Foreign trade data is incomplete
    Edited by: E_Hinojosa on Nov 30, 2010 4:51 PM

Maybe you are looking for