Accounting Document not updated in BKPF for JV by J1IH
Hi
The user posted JV through transaction code J1IH.
The document number is updated in table J_1IPART2 but when the user is trying to see the same document in FB03 we are getting the error message as "the document is not exist or not archived".
And we have checked in tables BKPF and BSEG we did not find this document.
Can anyone please suggest how to find the reason why the system is not updated this document?
Regards
RS
Hi Hari,
Thanks for your reply. I have checked in this transaction code also. The system is showing the message as "The document is already posted".
But it is not updated any tables except the document number is updated in table J_1IPART2.
Is there any other reasons for not updating the tables.
Regards
RS
Similar Messages
-
Accounting Document not updated after Vf01(billing)
Hi Gurus,
After creating invoice in vf01 when i m looking at accounting document, then my value is updated but the quantity is not updated in fb02.
when i see table BSEG then the value of MENGE is not updated there.
It is always coming ZERO.
Thanks in advanceHi
Please check whether FI doculments summarisation is active for this field under procedure VBRK.
Regards -
Accounting documents not generated in MIGO for Acct. ***.Category "A"
Hi Friends,
I have created a PO for Asset procurement. I have selected acct. ***. category as "A" in the PO. When I do the GR, the material document is getting generated but without any accounting document. Accounting docs are getting generated for other acct. ***. categories like for "F" and "K", but not in the case of "A".
Please suggest where in the configuration should I check for this issue.
Thanks & Regards
SatyaDear Satya,
Goto OME9, select your related AAC "A", then when you are maintaining PO with such AAC, the GR-non-valuated indicator will be set defaulted and greyed out (i.e. you can't be able to deactivate). If only GR-non-valuated indicator is set, then this indicator check box will be defaulted (but not greyed out) and therefore, you can change if you wish to. Yet, these settings are not relevant to the case of raising multi account assigned PO as in this particular case, SAP will automatically set the GR-non-valuated indicator check box regardless of if you have made any settings in OME9. Hope this could help you. TQ
rgds,
nanthakumar -
Accounting document not generating for excise invoice.
Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please help
regards
SubratIMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify Excise Accounts per Excise Transaction
Check if the following is maintained or not
DLFC CR Credit PLAAED PLA AED account
DLFC CR Credit PLAAT1 PLA AT1 Account
DLFC CR Credit PLABED PLA BED account
DLFC CR Credit PLACESS PLA cess account
DLFC CR Credit PLAECS PLA ECS Account
DLFC CR Credit PLASED PLA SED account
DLFC CR Credit RG23AED RG 23 AED account
DLFC CR Credit RG23AT1 RG 23 AT1 Account
DLFC CR Credit RG23BED RG 23 BED account
DLFC CR Credit RG23ECS RG 23 ECS Account
DLFC CR Credit RG23SED RG 23 SED account
DLFC DR Debit MSUSP CENVAT suspense account
Also IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify G/L Accounts per Excise Transaction
Check if for all Excise group u2013 DLFC u2013 Company Code combination GLs are maintained or not (especially in production client) -
Accounting document not generating for excise invoice-please help
Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please helpDear G. Lakshmipathi,
As uknow i am getting problem when i am creating the debit memo
so is there any specific ETT for debit memo is there .because we are not maintaining delivery type to billing type here in CIN setting
so its not goods removal through sales . so what will be transaction type for this.
how to check the error that why the accounting document is not generated as no error log is also comming.
so please help me in this regards.
Thanks with Regards
Subrat -
Accounting document not generated for cancled credit memo
Hi,
its related to rebet
den cancled credit memo.but accounting document not generated.
after that created new rebet and accounting document generated..so in document flow status showing open for cancled credti memo. how to delete or clear this? or how to cancle this?
kindly help me on this,
Thanks,
Regards,
Minesh SonejiError message:
validation user has got error " Doc.Date<=Post.Date and Postind Date <= Current date"
kindly help me on this..
global docs creaetd.........................................completed
global invoice created... ...............................completed
accounting document created.............not cleared
cancle of credit memo ......................open
global docs created........................cleared
accounting docs created ........cleared.
i need to remove this status cancle of credit memo , status is open, there should be accounting docs...
kindly help me on this..
this is related to rebet.
thanks,
minesh soneji -
Account document not created Message no. VF062 for the pricing procedure
When I tried to create an invoice I came across this problem of Account document not created Message no. VF062.
I created a pricing procedure with base price,BED,EDU CESS,HIGH EDU CESS ,VAT,CST.
Condtion record was set for each pricing condtion type.
Sale order>delivery->invoice
When invoice was stored i get the message accounting document not created.
After that i changed the condtion class of (BED,EDU CESS,HIGH EDU CESS ,VAT,CST.) from D-tax to B-price.Now the invoice is stored without the messag(accounting document not created).What will be the problem associated with thisi changed the condtion class of (BED,EDU CESS,HIGH
EDU CESS ,VAT,CST.) from D-tax to B-price
Whaterver condition types you have with condition class as D, I am sure, you should have assigned some Account Keys in your Pricing Procedure. Ensure that those Account Keys are appearing in OB40 as otherwise, you will face this issue.
G. Lakshmipathi -
Error in Posting Excise Invoice - Accounting document not generated !
Hi,
We have done the GR using MIGO-Only Part I, captured in the Excise Invoice using J1IEX and these two transactions are OK.
While we are trying to post the Excise Invoice, the system is displaying the following error:
Accounting document not generated!
Message no. 4F186
Please guide.
Please note that we are running the transaction in the Pre-production server for the very first time.
Also would like to know what all reports I should run related with Excise. Someone told me that I should run the T Code J1I5 & J2I5 to update the RG23 register the next day of the transaction the entry related with excise is not updated on the same day. I think the updation of register should be automatic
Regards,Hi,
I am repeating my Process/Question:
We have Created a Purchase Order with Tax Code (JMOP) related with Excise (Cenvatable).
We did the Goods Receipt (MIGO-> Only Part 1)
We did the Capture Invoice (J1IEX).
Till here every thing is OK.
While Posting the Excise Invoice (J1IEX), the system is giving the follwoing error:
Accounting document not generated!
Message no. 4F186
On Simulation window, the System is displaying the following CENVAT Posting:
24820020 Dr. 1,058.00
24820000 Dr. 105,840.00
24820010 Dr. 2,117.00
13113920 Dr. 109,015.00
But when we click on the Post CENVAT Button, the system is displaying the message "Accounting document not generated !" and exits.
Please guide.
Please note that we are running this Transaction on the Pre-production Server; On the Development Server it is working fine.
Regards, -
Accounting document not generated
Hi ,
I have created credit memo request in VA01.
i have generate biling documnet (credit memo) VF01 but accounting document not generate.
it is giving error message when i am trying to release manuvally.
"Reason code SE is not defined"
Message no. F5596.
please help what can i do for posting accounting document.
Thx
k.SatishHi,
You're welcome. You can read about reason codes here:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/01/a9b999455711d182b40000e829fbfe/frameset.htm
Regards,
Eli -
Accounting document not cleared when billing document is cancelled.
Hi,
In ECC 6.0 when we cancel a billing document through vf11 in vfo3 we find the status as accounting document not cleared.
The general process is manually going to f-23 and clear customer line items of that invoice. After doing this the status become accounting documet is cleared.
My requirement is how to cancel the billing document without getting this message (accounting document not cleared) and not clearing the customer line items manually.
Can it be done through user exit/enhancement or by copying requirement vofm.
Please suggest.
Thanks
Edited by: sumesh on Jul 29, 2009 6:33 PMThey directly want the accounting document to
be cleared when billing document is cancelled.
Though you can achieve this with the help of ABAPer, why dont you consider having a Posting block for your billing type so that as and when the billing documents are generated, you can release it via VFX3 in bulk or VF02 for individual billing document release to FI.
In order to achieve this, go to VOFA, select your billing type and execute. There you can see a field "Posting block" where maintain a tick there and save. With this control, first of all, you can ensure that before releasing F2 billing documents to FI, it is not cancelled.
thanks
G. Lakshmipathi -
Accounting document not cleared
HI,
I am saving the vf01 and going to document flow there it showing "accounting document not cleard" what i need to do. and vkoa is done..
Thanks,
anand.kHi Anand,
Pls check ERS & ERL keys are assigned to your sales org in VKOA and also proper G/L Account exists for this assignment. Pls let me know, exactly what message ur getting for this error.
Thanks
Sandip M -
After cancelling the billing document accounting document not generated
hi,
we released the billing and accounting document generated but customer needed changes in the billing values so we cancel the billing document but accounting document not generated(reversal accounting not happen)....in document flow it shows in cancel document in blocking state ....we try to release in VF02 but it throws the error "Client 200 does not contain an active application area" . but the other sales order we test in qulaity server the scenorio is working fine...............for specific one sales order creating problem now.....
try to solve the issue ..
Thanks
Muthuraman.DDear all,
I have noticed this problem in my company system.
Problem descripion:
- you creates an invoice and the system doesn't post it for any reason
- then you create the cancel of the invoice, BEFORE forcing the posting of the invoice
--> user creates Cancel, Cancel is not posted as well.
--> from now it is impossible to post both invoices: if you try to post the Invoice after the cancel creation, the VF02 recongnise that a CANCEL exists and do not allow for the posting
--> standard VFX3 doesn't signal this kind of not posted documents situation.
Ok, The right procedure for thes user should be: create invoice, if not posted then try to understand why not posted, and not CANCEL it.
But in this case VFK3 was not able to detect the invoice was not posted: it was not in the list.
So the 2 ways must be:
1) one possibility could be undestand in VFX3 could be enhanced: I checked in OSS but I didn't find anything.
2) other possibility: add a further check in interface between SD and FI in order to check if original invoice is not posted to FI and in this case block the cancel creation, as instead standard SAP does.
Could you please give me an idea on how it would be better proceed?
Thank You very much.
Raffaella -
Accounting document not generating
hi friends,
when i put internal order in sales order profit centre changes, delivery done,billing done , perhaps it generate acounting document regarding excise only ,and not revenue,
does any one knows why is it so.Hi,
Go to VF02 and press the release flag by giving the relevant billing document number then you will get the error for what reason accounting document not generated.You can also give in side the billing document and there in enviornment Account Determination analysis and revenue Account Determination there you will get clear picture for the reason.May be some setting missing in VKOA. -
Accounting document not generated during billing
Hi All,
Our issue is as following :
Standard sales order created with 53 line items, delivery and billing completed where as the accounting document not automatically released. The error message is maximum no. of line items for FI Document (999) has been exceeded.
For this Sales orders had we made two separate billings then this problem could have not occurred.
Now how can I split the billing document in to 2. (either by deleting the existing one and recreating 2 separate billing docs ?) Invour case all the 53 material delivered in one delivery order.
Please suggest the corrective solution...
Thanks in Advance..
Thanks and Regards
Somayaja phaniIn your case you have two options. one is post accounting entries manually into systme for this you no need to reverse delivery. second you have to reverse delivery and reprocess in two dirrerent documents.
padma -
Billing Number Range problem ( accounting document not generated)
Hi All,
I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
K I N D L Y suggest as U R G E N T.
Regards,
Danny.Dear,
Billing Number Range problem ( accounting document not generated) is not an error because when you create billing document then accounting document not generated. Accounting done after posting of that billing document with VFX3 or VF02 T.Code by account department.
And for second issue you had define number range between 0090000000 and 0099999999 for invoice so thats why it happen.
Regards,
Sandip Shaktavat
Maybe you are looking for
-
Can rented movies be on more than one device at a time?
Can rented movies be on more than one device at a time?
-
Hey. I wanted to create a Psi user to be able to use iChat for my MSN account. Unfortunately, when I try to create an account I get the following error: +There was an error registering the account.+ +Reason: Forbidden.+ +The requesting entity does no
-
HR_INFOTYPE_OPERATION within Dynamic Action
Hello, I am calling HR_INFOTYPE_OPERATION from within the Dynamic Action. I can debug through it and even have it display the screens and everything appears to work fine. The return structure is clear of any errors and the key structure indicates t
-
Material Level batch management
how to configure materila level batch management, batch number of the material starts with first 3 char of the materil eg: computer = com001, sum thing like this tahnks and regards madhu
-
How to copy expenses when copying contract to contract in GTM
Hi, In GTM (Global Trading Management module), while doing contract to contract copy only expenses are not getting updated.Could you please let me know if you are aware of any method or function module that will do the same.I really appreciate