Accounting Document Post with Ledger Group

Hi,
I am trying you post accounting document using 'BAPI_ACC_DOCUMENT_POST', But my requirement is to post the acc documents with 'Ledger Group', I couldn't find any parameter in the above mentioned BAPI. If anyone come accross same requirement please share your knowledge and suggest me how to proceed with this.
Before posting this thread I searched for the threads with same category, but i couldn't find sufficient information.
Regards,
Narayan

Hi Navitha,
I am doing migration as It's a one time activity, If I implement BADI it will be triggered whenever accounting document posting happens, Is there any other way to pass Ledger group like other BAPI / FM etc ?
Regards,
Narayan
Edited by: narayanasamy rajagopal on Sep 30, 2009 11:08 AM

Similar Messages

Accounting postings with ledger group - How to remove it?

Hi Guys...
The postings of the transactions TBB4 and TBB1 are recording the ledgers group (BKPF-LDGRP) = "0L" in the accounting postings. The client is requesting that this information is not recorded.
How do I remove it?
Thanks a lot.
Best regards.

Hi Rodrigo,
Please use the IMG path below to create a ledger group that contains just the ledger you want to accounting.
Financial Accounting (new)
Financial Accounting Global Settings
Ledgers
Ledger
Define Ledger Group
You must create and assign accounting principles to the ledger groups you created.
Financial Accounting (new)
Financial Accounting Global Settings
Ledgers
Ledger
Parallel Accounting
After all, you must assign your valuation area to the accounting principle
FSCM
TRM
TM
Accounting
Organization
Assign Accounting Codes and Valuation Area
Regards,
Itajaci Júnior

Text in accounting document posted against Excise invoice

Hi,
We have a requirement that the accounting document posted against excise invoice ( J1IEX) should display a text ( Vendor name and PO No.).
We have tried entering the text at the time of capture and posting the excise invoice.But this does not reflect in the accounting document text field.
However we can maintain the same afterwards from transaction FAGLL03.
Is there any option that we can maintain the same at the time of capturing and posting the excise invoice.
Also,if I think of defaulting the same ( Vendor name and Po no) is ther any user exit OR BAPI.
Rajesh

hi
yes is their in this go to spro->img->Logistics - General->Tax on Goods Movements->India->Basic Settings->Maintain Excise Groups
in this for your excise group in *migo settings please put the tick mark in post ei in migo the at the time of migo only the excise invoice will be posted. no need of doing the ji1ex here.
Thanking you

Trip Co Document posted with value type 11 - Statistical actual

Dear all,
Can you please share what caused the CO document posted from Travel Management (tcode: PR05) having value type = 11 Statistical Actual?
So far all the CO documents posted from Travel Management have value type = 4 - Actual.
However we have a CO document posted from Travel Management with value type = 11 - statistical actual.
Question:
1. What caused the CO document posted with value type = 11?
2. How to fix/change the value type for this CO document from 11- Statistical to 4 - Actual?
Thank you very much in advance for your kind assistance.
Best rgds,
DTan

Normally it means that in your CO account assingment there is also another CO object with a higher priority where the real value was posted. For example if you do account assingment to the Cost Center and Internal order the real object will be Internal order and statistical posting will be at the Cost Center. Anyway it should be visible within CO document.
The way to correct it is to reverse and repost, means changing the trip and transferring it again.

Report on documents posted with user name-urgent

Hi All
Is there any report available to find out the documents posted with user name on any one particular date.
This req. is for a audit purpose.
Thks & regards
nivi

Hi Hein
They dont want to use any query and generate report. There are billing issues. They are enquiring whether standard report or transaction code is there to track the same.
Anyway Thks for your inputs.
Thanks & Regards
nivi

BAPI for Accounting Document Posting

What is the name of BAPI for Accounting Document Posting and how can I run it?

Hi ,
Can you send me the code how to use the BAPI_ACC_DOCUMENT_POST.
Regards,
L Srikanthan.

How to use Bapi BAPI_ACC_DOCUMENT_POST for g/l account document posting

Hi all,
I am using BAPI_ACC_DOCUMENT_POST bapi for g/l account documents posting.as I am first time using BAPI in my program.can anyone give details about how to use this BAPI for document postings.what importing parameters need to be passed , which exporting parameters need to be passed and which tables need to be used.
Thanks in advance.
Regards,
Harshada

Moderator message - Please search before asking - post locked
Rob

Copy mvt 561W with no accounting document posting

Hi all,
I want to copy movement type 561w (special stock - consignment) to a new one, but that mvt should not post any accounting document as this mvt will be used for processing consignment stock which does not need to be maintained price & value but quantity.
Please help!
Best,

if you sold the material already, then the material is owned by your customer, that makes it clear why it should not have a value in your books.
561W does not work because special stock W is stock that is owned by you, hence it is valuated.
here are some alternatives:
you can create a second material master (type UNBW) and receive the customer owned material to that new material.
you can create a vendor master as equivalent to your customer and receive the material as vendor consignment stock. this will as well create no accounting documents, except you use parts of the quantity for own purposes .
you create a return order and receive the material into return stock Return stock is non-valuated. When the customer finally has space to get the material, you just cancel the return delviery.

Accounting document posting enhancement

Dear All,
I am having requirement of exchange gain/loss should go only loss g/l account. since it is client level setting i cannot change this & it is required only for 1 of the group companies. other cos follow std process it gain/loss based on the transaction. Can anyone suggest is there any function module /exit which i can use & change the G/L account NO while posting accounting document automatically by system through hard coding of G/L at program level.
Early reply is helpfull .
Thanks
Pramod

Hi Pramod,
note 127178 (and 126192) offers a solution with exit_sapliedi_001 to post to several G/Ls instead of only one.
regards Bernhard

Cannot clear document posted with FBS1 and Reversed with F.81 in F-03

We have recently turned on OIM for a Balance Sheet account and are in the process of clearing it. The postings in this account were generated with FBS1 (Accrual/Deferral Document) and reversed with F.81.
Majority of the documents displayed with FBL3N cleared no problem after open item management was turned on, however, there are a handful that are not displayed in F-03 (or F.13).
Please consider the following when answering:
OIM was turned on for the account using ZRFSEPA02 (Copy of the standard/not-delivered program for turning on OIM).
All of the entries were reversed with F.81 and the header of the documents does not contain a "Reversal Date".
I have already tried turning off OIM with ZRFSEPA03 and then turning it back on again with ZRFSEPA02.
My settings in FS00 are correct for the GL Account.
Hundreds of items were cleared. There are 7 documents that don't appear in F-03 or F.13
Also, please do not give me "Beginner level" information such as "Tick the OIM box for the GL Account in FS00" (You cannot turn on OIM in that manner for an account that has line items posted to it - I have been doing R/3 Configuration for 23 years, so I am an advanced Analyst in the FI/CO Area).
Thanks - Back to searching OSS!

Hi,
Actually when report is executed we get following message
Do not use the report program to set up open item management for the
account.
Create a new account with the correct account assignment. Post your
items to the new account. If you want to use the original account
number, you must bring the account balance to zero, change the account
assignment, and repost the items. You can remove the old items by
archiving the documents.
Hence, it is risky to execute this report.
Are you getting these documents in FB03 ?
Regards,
Tejas

How to add line items to Accounting Document posted through MIRO ?

I need to perform Additional posting when Posting through MIRO transaction..i tried with INVOICE_UPDATE BADI but this was not useful...Please let me know if there is any way to add additional posting to Accounting Document created through MIRO.
If any user exit , BADI ot BTE present?

Hi,
Check the BTE's:
00001020     POST DOCUMENT:       Prior to final checks             SAMPLE_INTERFACE_00001020
00001025     POST DOCUMENT:       Final checks completed       SAMPLE_INTERFACE_00001025
00001030     POST DOCUMENT:       Posting of standard data     SAMPLE_INTERFACE_00001030
00001050     POST DOCUMENT:       Accounting interface           SAMPLE_INTERFACE_00001050
Thanks & Regards,
Harish

Reverse Document Post with ABF1

Hello
I have used the transaction ABF1 to post documents with reconciliation AA account.
Know i need to reverse some documents that are not ok.
Does anyone know if exist any transaction to do that?
Thanks and Regards
Joao Simoes

Hi,
you can not reverse an ABF1 document. You have to create an inversal posting. You can do this within ABF1 frmo the menu (create inverse posting with relation to original document).
Regards,
Markus

Accounting Document Posting

Hello All,
During MIGO GR against Production Order due to a dump in a customized BADI, the Material Document gets generated but Accounting Document Doesn't generated. Now we have solved the problem and dump is not coming. Now our requirement is to do account posting for the document( some 18 documents ) for which the material document is generated due to dump but Accounting document doesn't created. Can somebody tell me about the way to achieve this.
Thanks and Regards
Animesh Sundriyal

Hi dear Animesh,
Yes there is a program that can allow this automatically
Please use SE38
Then program RGURECGLFLEX
Then, you can put the documents number in selection and can try first with test run, if it seems correct, run it in real mode
Hope this help
Regards
Tarek
Edited by: Tarek AYACHI on Sep 23, 2011 1:13 PM

Question on account document posting...

Hi,
I am interfacing between 2 systems, one being ECC 6.0 and another the 4.6 system. I am calling the FM ALE_ACC_DOCUMENT_POST with document header containing the BELNR which i assume to be the invoice number (billing document number). Now this is passed to 4.6, and the BAPI BAPI_ACC_DOCUMENT_POST is called. When this posts (creates) the invoices in 4.6, the VBELN is blank and BELNR is getting the value as it was in ECC 6.0.
4.6 uses external number range for accounting documents.
I have a report in 4.6 which checks for bsid-vbeln which I assume to be the invoice number for open invoices. Right ? But this field happens to be blank for the invoices that got transferred from ECC 6.0. For all other invoices that were create in 4.6, the value in VBELN and BELNR are same.
I assume that BELNR needs to be set in VBELN too for the invoices passed from ECC 6.0. Am I right ?
I am not able to do that ALE_ACC_DOCUMENT_POST FM as there is no field to do so. So how should I achieve this. Hope I am clear.
thks

An accounting doc no is an invoice for particular doc types.
find that accounting doc type which is an invoice
use SD00 (Billing Document) to pass corresponding billing data to accounting.
regards
Arjun
Edited by: Arjun Subhash on Dec 18, 2008 2:45 PM

Userexit during automatic excise accounting document posting

Dear All,
Here the requirement is like that at the time of posting billing document their wil be two accounting documents are generated one for the Billing document transfer and other for the Modvat claimable(excise accounting document).
Here the business requires that in Modvat claimable accounting document's Assignment field i want to stamp the shipping point (from where the goods are despatched).
In our case excise invoice posting is automatic during Billing document posting(transaction VF01).
Is it possible with any excise related userexit?
please suggest.........
warm regards
ravi

Hi Ravi,
How did you solve this case? Is there any sample code? In our case, we need to generate 2 accounting documents during billing. SAP Standard function cannot support this as I know; User exit could be the only way but I have know idea how it works. That will be helpful if you can share your code or sulation with me. Thanks.
Regards,
Robert Chen

Accounting Document Post with Ledger Group

Similar Messages

Maybe you are looking for