Accounting Enteries corresponding to a line item of PO

HI Gurus,
My requirement is to pull out Tax amount from the ACcounting Documnmet generated after Invoice posting.
Challenge is:
PO Line items are connected to INvoice Line Items.
But Invoice Line Items are not releated to ACcounting DOc Line Items. As the ACcounting documnet is generated at the header level.
Can any one of ypu please suggest the logic to pull out the Tax amount at the item level.
Thanks
Tausif

Hi Rahman,
table BKPF may help you resolve this.use the OBJECT KEY.
Thanks
Aravind
Assign points if helpful

Similar Messages

  • How to make the GL account discription possible in FAGLL03 line item display?

    Dear Experts,
        Could you tell me how to make the GL account discription possible in FAGLL03 line item display?
        I checked the layout, there is no account discription.
        How should I do?
    Thanks!
    Xinling Zhang

    Hi
    One you execute FAGLL03, go to Settings>Layout>Current Header Rows
    You can add some predefine characteristics here.
    I am not sure why the hyperlink is not working at your end. But you can search the SDN for special fields in FAGLL03 and you can get lot of posts for this document.
    Regards
    Sanil Bhandari

  • Error 'Enter GL Account' while posting and invoice line item in MIRO

    Hello Gurus,
    I am facing a rather wierd issue.
    While posting a PO invoice in Tcode MIRO, its asking to enter the GL account in line items. Everytime I am entering the GL account and pressing the enter key, it wipes off the GL account clean and gives the same error 'Enter GL account'.
    It seems like this error is happening at the very first line item of the invoice. System is able to accept the GL account in 2,3,4th lines. If I delete the first line item, whatever is the first line item in that screen adapts the issue.
    Any help would be great as I have no clue what to do.
    Thanks

    Hello Priyadarshini,
    could you inform the error message number and it complete long text?
    Regards,
    Mateus Grings

  • Manual account clear but can see line item after post document

    Hi Guru!
         I have post account clear with transaction code F-03  with open item zero balance such as
    account 214001 balance +500
    account 214001 balance -500
    when I simulate entry the system not show line item for post document but can post it . I want to know why ?
    thank you very much .

    Dear,
    This is standard behaviour...if line item which you are clearing have zero balance then system will not show any line items since open itemss are cleared....
    when you have tolerance difference or the residual posting then only system will show the line item....
    Regards,
    Chintan Joshi

  • Account assignment model for customer line items

    Hi all
    As per SAP, account assignment models can be used for creating the entries for GL accounts. I have a scenario which requires similar type of feature for Customer and vendor items also..
    Is it possible to create an account assignment model for Customer and vendor line items..with posting key 01..?
    Thanks and Regards
    Rakesh

    Hi,
    Account assignment model is created using transaction code FKMT. It does allow using posting key 01, however unlike in GL Account - Customer accounts will not be always same. Hence, normally used for GL postings.
    In case if you are going to use for the same Customer / Vendor Account you can try it using transaction code FKMT.
    Thanks
    Murali.

  • Multiple account assignment category for one line item in PO

    Dear Experts,
    We are on SRM 5.0 ECS
    One line item of a PO has multiple account assignment category with the cost distribution for
    1. Cost Center - 50%
    2. Order          - 50%
    Is it possible?
    As per my understanding one line item in a PO can have only one account assignment category
    Regards
    Mick

    Hi,
    Yes it is possible by Po line item.
    Just go to transaction bbp_poc through the web interface.
    Select your PO
    Select your line item PO.
    goto the account assignment tab (item overview)
    you get a cost distribution field in percentage
    then you get a cost distribution button : click it and you get several lines where now you can split your 100% in as many lines as you want.
    BR,
    Disha.
    Pls reward points for useful answers.

  • Accounting documents with payment details line item

    Dear all,
    when i create witth transaction TBZ1 the account document related to a deposit financial transaction i generate a line with negative amount on the account related to the business partner ( FTR-EDIT / PAYMENT DETAILS / PAYER-PAYEE ).
    I need to generate the negative amount on the account related to the house bank/account id of the payment details line item.
    Some of you can help me.
    Thanks for help.
    Best regards.
    Elena Tremolada

    In the customer master assign a different credit memo term than the payment term.
    Try changing the credit memo term for 3rd Invoice as such it do not fall in your selection criteria.

  • User-exit to fill PO line item G/L account no. and other details

    Hi All,
    I am looking a customer function or a BADI to fill in the account number when PO is about to be created.
    My requirement is that based on some conditions account number in Account assignment tab for PO line item should be filled or overwritted if there is already a one selected, so that when user see the value for account number, it is the desired one.
    I tried with exit EXIT_SAPMM06E_006, which has the table TEKKN(account assignment for purchasing document) parameter but when I debugg it and assign some other value to TEKKN-SAKTO for the corresponding line item, I can see that changed value is not coming.
    Any clue?
    Regards,
    Mark

    Hi Mark,
    You can try implementing follwoing BADI's:
    ME_GUI_PO_CUST
    ME_PROCESS_PO_CUST
    Let me know if it helps.
    Gouri.

  • Multiple line item in billing but only one line item in accounting document

    Hi Everyone,
    I am having one scenario in which sales order has more than one line item. Only one billing document is create for all line items in Sales Order but billing document contains as many items as sales order has. In accounting document of billing i find only one customer line which has total amount of all line items in billing as debited. My requirement is Accounting document also should have as many line of customer-debit as in billing items i.e sales order. For example :
    (1) Sales order has 2 line items.
    (2) Billing document is only ONE and has 2 line items
    (3) currently accounting document has only ONE line of Customet - Debit ( Total amount of both items)
    My requirement is
    Accounting document should have 2 line item of customer - Debit
    Customer - Debit (amount of first line item)
    Customer - Debit (amount of Second line item)
    Sales - Credit
    How can it be done ?
    Regards,
    Manish

    Hi,
    This is the SAP expected behaviour
    As far as the values correspond to same account key and same GL account as per account determination, then ti will be posted as a single line item in FI document.
    If you want the customer specific items to be posted in two GL accounts , then you have to do the account determination that way.
    For example, you should have a condition table in FICO as follows.
    Sales org/ Account key / Customer
    For this condition table, the entries shoudl be as follows.
    5110/ERS/Customer A  GL ACCOUNT IS 5000100
    5110/ERS/Customer B GL ACCOUNT IS  5000200
    In this case, there will be 2 entries for the invoice instead of just one line entry.

  • Wip gl account amount and fbl3n line item gl account not matched

    hi sap gurus
    Cound any solve this error
    i got one error at the time of wip calculation i.e., during settlement of order, the wip gl account amount and the FI line item gl account amount i.e., in fbl3n line item the wip gl account shows the differnt amount.
    now my question is why system shows like that Plz any one tell me the solution.

    SAP Note says 968812
    There are various reasons for verified differences:
    1. You made direct FI postings to material balance sheet accounts.
    2. In MM account determination, balance sheet accounts are used for operations other than 'BSX'.
    3. Material documents exist that have no FI follow-on document, even though they should.
    4. There are FI documents or other accounting documents but the source document in materials management is missing.
    Solution
    (Point 1)
    The amounts from these postings do not have any equivalent in the material valuation and therefore cause the MM/FI differences. You must cancel the corresponding postings in FI. You must then set the 'Post automatically only' indicator (XINTB) in the account master record (fs00).
    (Point 2)
    In MM account determination, material stock accounts can only be assigned during operation 'BSX' because only these postings update the material valuation. Postings from other operations, such as price difference (PRD) or revaluations (UMB), lead to MM/FI differences. The balances resulting from this must be transferred to other accounts in FI.
    (Point 3)
    Your system contains active customer enhancements (user exits, customer exits, BAdIs) that cause an additional 'COMMIT WORK' statement to be processed. This is not allowed and results in inconsistencies. The incorrect documents can be corrected by SAP Remote Consulting (SAP employees should refer to internal Note 941721).
    (Point 4)
    This case is identical with case 3. However, usually it is not a 'COMMIT WORK' statement that is responsible but a 'ROLLBACK WORK' statement in the customer source code. In particular, method MB_DOCUMENT_BEFORE_UPDATE in BAdI MB_DOCUMENT_BADI creates a ROLLBACK without program termination and an incomplete document because the documents in accounting are created after the BADI. Therefore, a ROLLBACK must always be accompanied by a program termination.
    The MM document cannot be regenerated. The accounting documents must be deleted. This can be initiated by a message (which may be subject to charges) on component FO-GL-GL-X. See also Note 636442.
    (General)
    If the cause of the problem is unclear, SAP support can run an analysis. In this case, first implement the additional reports from Note 32236 in your production system.

  • Outgoing cash Payment line item account not printed

    Hi,
       In case any cash payment raised through outgoing payment, line item(account name, amount, etc..) table is printed. If check payment, we can get the print(Line item) out. If anybody knows the reason for not printing the table. please tell me.
    Thanx in advance,
    Suresh.

    Kevin,
            If it's one line, we can do as say, We have more than one line. we need repetative area.
    Scenario,
    Screen:    Outgoing Payment
    Select:       Account  ( not customer or not supplier)
    line table(Account) : Enter more than one line.
    Payment mode:  Cash.
    finally Check  the printout:   Line table which contains accounts are not coming in the printout.
    Created:  Own PLD.
    Suresh.

  • Account assignment template (FB60) Line item Value date

    Hi Gurus,
    I have an issue regarding the value date on line item level on Account assignment template on FB60. When user activates an Account Assignment template, on each line item system populates the value date equal to the date of the template creation date and not the current date. I created the template with several GL accounts and before saving it I deleted the value date from the line items. Now I want to reuse the same template after a week, it shows the correct GL accounts but with the value date equl to the template creation date (last week date). Any suggestion please, how can I fix this.
    Regards,
    Ahmad

    In the IMG "Enter Global parameters" for your Company code change the status of the switch "Define Default value date" and then test.
    Thanks
    Ron

  • Unable to see line items in segment clearing account

    Friends,
    Why we are unable to see the line items in intersegment clearing account/zero balance clearing account, eventhough the master is maintained as open item  and line item display.

    Hi,
    I have received the following error message.
    Account 1999990, company code xxxx is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.

  • Want to Change GL Account in Line Item of KSV5

    Hi,
    In my requirement I need to change GL Account in one of Actual Line Items of transaction KSV5(Execute Actual Distribution).
    Can any one suggest the Userexits/BADi for this kind of change or any other way to do.
    Thanks.
    RP

    check this exits
    SAPLKAL1              Allocations: Authorization Check in Cycle Maintenance
    SAPMKAL1             Allocations: Authorization Check in Cycle Maintenance
    SAPMKGA2            Allocation: Execute Authorization Check for Cycle

  • Profit center clearing accounts line item display

    Dear all,
    I have implemented  document splitting at  profit center level.
    The zero balance clearing account (profit center clearing account) is open item managed and also line item display tick is  put. eg both ticks are active.
    I am trying to see the line items in the account using fbl3n,fs10n etc but am not able to view the line items althought the balance of the account is  visible in fs10n.
    the message i get is 'no line item selected'.
    Pl suggest some way through which i can see the line items of the profit center clearing account.
    Regards,
    Rishikesh

    Dear Venkatesh
    I am also facing same problem, I am using T Code FAGLL03 to display Line Items for Zero Balance Clearing A/c but I am not getting line item display instead it is giving following error.
    =========================================================================
    “Account 141010, company code VALC is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 141010 in company code VALC as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
    =========================================================================
    Please do suggest me.
    Thanks in Advance
    Regards
    Ratnakar

Maybe you are looking for