Accounting entity not reflecting in display area during ERPI setup

Hi All,
I am trying to setup ERPi to load data from Oracle.
When i am intializing the source i am getting ( The process has been submitted to initialize the source system. Process ID: 8 Extract ID: 89501)
but when i am trying to configure Accounting entities i am able to select Source system type and source system, i am not getting list of Accounting entities in display area.
Architecture:
i am trying to pull data from Oracle GL(11.2.1 E business suite release 12) to hyperion planning version 11.1.2.1. using ERPI. I am using ODI 11.1.1.6.1 and i have applied patch 502 along with it.
ODI is working fine i am able to run and test agents as well as able to test the connection with database
please help.

Did the source system initalize successfully? You need to look at the process details and ODI Operator to see if the scenario completed successfully.

Similar Messages

  • Error -Account 'Down-payments clearing account' could not be found for area

    When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
    Account 'Down-payments clearing account' could not be found for area 01
    Message no. AU133
    Please help me to rectify the same.
    Thanks in advance
    Deepak

    HI
    Please pay attention at  the possible causes of message AU133:
    1. Error AU133:
       a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
    structure.
       b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
    2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not  permitted.Check whether your account determination is correct               
       (Transaction AO90) in Asset Accounting Customizing. The same applies
       for the 'Contra account: Down payment posting'.
    3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
    4.Check if you need  revaluation accounts in depreciation areas involved   (AO90):
      -Revaluation acquis. and production costs
      -Offsetting account: Revaluation APC
    Please run also programm RACKONTO where missing or wrong customizing
    the accoutn determinations per company code is displayed
    Also have a look at note 7595 in this regard.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Bank account number not reflecting while creating invoice some parties

    Hi All,
    We are facing following issue while creating invoice's for some particular parties.
    Bank account number is not reflecting while creating invoice at invoice work bench from front end. Bank account details are properly attached at party site level.
    Kindly guide us regarding this.
    Thanks,

    Hi Team,
    If you are getting XXXX in place of Bank number then the issue is at (Setup > Payment >Payment Adminstrator).
    Log into Payments Setup > Shared Setup > System Security Options. Now you will find "External Bank Account Masking Setting" & Number of Digits to Disp . Now provide the numer of digits to display.
    Thanks
    Vinod K

  • 802.1x accounting does not reflect correct port status

    Hi,
    I've just discovered an issue when trying to use MSFT supplicant and Cisco 802.1x accounting. This makes 802.1x accounting completely unusable.
    Facts:
    1. MSFT supplicant does not send EAPOL-Logoff messages and there's no way to enable this (btw. Aegis client does not send it either, except when disabling interface).
    2. I am doing machine authentication along with domain authentication.
    3. Windows XP SP2 is used with EAP registry hacks applied.
    4. PEAP/MS-CHAPv2 method is used.
    Now when the computer is started it is logged into 802.1x with 'host/machine' account and RADIUS accounting start is sent by the switch. That's fine.
    When a user logs on with its 'domain\user' identity, then EAPOL-Start is sent from the host triggering new EAP message exchange and the user is authenticated correctly. However the switch sends Interim Accounting still using 'host/machine' credentials which is obviously wrong.
    Even more bizarre accounting happens when the user subsequently logs off from the machine. The EAPOL-Start is sent from the host triggering new authentication process for 'host/machine' identity and the host is authenticated ok. The accounting being sent is:
    - first Accounting Stop for 'host/machine' User-Name
    - then strange Interim Accounting with most attributes empty or missing
    256970: Jul 10 15:56:41.211 MET-DST: RADIUS: authenticator 68 CA 1A 46 85 4F F5 95 - 87 B4 84 61 72 85 42 F3
    256971: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Id [44] 10 "013F0000"
    256972: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 34
    256973: Jul 10 15:56:41.211 MET-DST: RADIUS: Cisco AVpair [1] 28 "connect-progress=Auth Open"
    256974: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Time [46] 6 0
    256975: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Octets [42] 6 0
    256976: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Octets [43] 6 0
    256977: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Packets [47] 6 0
    256978: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Packets [48] 6 0
    256979: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
    256980: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Status-Type [40] 6 Watchdog [3]
    256981: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 24
    256982: Jul 10 15:56:41.211 MET-DST: RADIUS: cisco-nas-port [2] 18 "FastEthernet0/11"
    256983: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port [5] 6 50011
    256984: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port-Type [61] 6 Eth [15]
    256985: Jul 10 15:56:41.211 MET-DST: RADIUS: Class [25] 27
    256986: Jul 10 15:56:41.215 MET-DST: RADIUS: 43 41 43 53 3A 30 2F 32 39 32 66 2F 61 38 31 38 [CACS:0/292f/a818]
    256987: Jul 10 15:56:41.215 MET-DST: RADIUS: 30 32 38 2F 35 30 30 31 31 [028/50011]
    256988: Jul 10 15:56:41.215 MET-DST: RADIUS: Service-Type [6] 6 Framed [2]
    256989: Jul 10 15:56:41.215 MET-DST: RADIUS: NAS-IP-Address [4] 6 10.129.128.40
    256990: Jul 10 15:56:41.215 MET-DST: RADIUS: Acct-Delay-Time [41] 6 0
    256991: Jul 10 15:56:41.239 MET-DST: RADIUS: Received from id 1646/238 10.129.128.38:1813, Accounting-response, len 20
    256992: Jul 10 15:56:41.239 MET-DST: RADIUS: authenticator ED 8E 8B 15 28 5F E4 37 - BF A8 F5 9E 10 43 5E A8
    So that the accounting sent from the switch does not reflect current status of the authenticated user on a given port.
    How to deal with this issue? Any ideas?
    thanks,
    robert

    Does your radius proxy-table is populated wrong for EAP- SIM users ?

  • Account Manager Not Reflecting Skype Minutes used

    My account used to reflect this.
    I use my iPhone WITH WiFi on to make my calls through Skype.  I have a Skype phone number.
    For some reason, the "usage" minutes are all reflecting "0" yet in my history, it shows calls being made.
    Anyone know why this happens?

    I'm having the same issue. I'm on the unlimited US and Canada plan, but my minutes usage shows at 0. I have two friends who are on the same plan and their usage is accurate. It would be really helpful to see an accurate count on how much time we spend on the phone. 

  • J1IIN reversal accounting document not reflected in SD document flow

    Dear Experts,
    I have created a billing document and then posted excise through J1IIN. When I reverse the Billing through VF11 there are two accounting documents generated(one for billing and other for Excise reversal). But the Excise reversal accounting entry doesnot update the table J_1IEXCHDR for which again i have to post a reversal for Excise through J1IH. So in order to remove the extra accounting entry for Excise reversal during VF11 we have applied Note No:-  551932 due to which the extra accounting document for reversal of Excise is not getting generated but the reversal of Excise made through J1IH doesnot get reflected in the SD document flow.
    Please let us know how to get this entry in SD document flow.
    Thanks & Regards
    Edited by: Aniruddha B Mahalle on Feb 13, 2012 2:45 PM

    Hi Vikas,
    Cancelling J1IIN excise invoice will by default take me in the transaction J1IH what i wanted to know is that can the J1IIN cancellation of excise invoice be shown in the SD document flow. If yes then please let us know the note number to be applied to it.
    Thanks & Regards
    Edited by: Aniruddha B Mahalle on Feb 16, 2012 8:07 AM

  • Tracknames when brne do not reflect songname but are just trackxx.cda

    I use itunes 141.0.4.4-want to burn playlist on cd. Although "include cd-tekst" is checked, tracknames are trackxx.cda and not the name-field.cda (name-field from the playist). Was not so in previous versions. How to correct this?

    IThanks,
    but I see now that I was to quick asking this question.
    Indeed windows see only tracknames but the name can be changed ( I use artiest-track title.ext (with ext mp3 or wav) - the values are read from the included cd-tekstwhen ripping with f.e. freerip
    so consider my question as solved for now.

  • Items from Gmail Sent folder not imported to Apple Mail during IMAP setup

    Hi,
    I just set up IMAP for my Gmail account. Now, although my Inbox folder got copied over to Apple Mail, the Sent folder did not.
    Anyone know how I can copy this over too? Its just that I have lots of flagged items that I occasionally reference from the Sent folder.
    Thanks.

    I'm presuming you have webmail access? In the webmail environment, can you move those messages into another folder or into the inbox itself, then connect in the Mac Mail.app environment, the mailboxes/folders will synchronize, then drag-and-drop them into the Sent folder? And make sure that in Mail's Prefs, you have the "Store Sent Mail on server" checkbox checked?

  • Error 1325 (not valid short file name) during JRE setup

    Attempting to setup tle latest version of JRE on Windows XP Pro (either with online or offline setup), after configuration check, an error message box appears, saying
    "Documenti is not a valid short file name"
    The related error code is 1325.
    What may be the cause of this issue?
    Thanks in advance :-)

    Sorry for the inconvenience, but I've posted this message in a wrong section... can you delete it, please?

  • Business area does not reflecting in IT 0001

    Dear Expert,
    I have assign cost center to organization unit, then hire employee through PA40, so position assign into IT0001,
    system pick up the cost center but does not reflecting the business area in infotype 0001.
    i checked with FI consultant, there is proper intergation between cost center and business area.
    Please tell me, how to resolved this issue.
    Many Many Thanks
    Urvashi 

    Hi Urvashi,
    You will get the  Default values for Company code, Personal area, Personal Sub Area and Business Area  because of Account assignment infotype - IT1008 - for your position or Org Unit
    check from PO10 or PO13 and infotype 1008.
    You will have PA value defaulted on IT 0000 screen and others defaulted on IT 0001 screen.
    You can change these values on respective screens. A warning will be issued but you can overwrite them.
    Regards,
    HARANATH

  • HT5312 Why my account is not working

    Why my account is not working

    If you would like help from these user-to-user forums then we will need more than 'why my account is not working'.
    What are trying to do on your account, what happens when you do it, if you are getting an error message then what does it say ?

  • Clean up old account - deleting not enough...

    I have 2 admin accounts on a Powerbook G4. One account "Sally", upon login, will go to the blue desktop screen then hang or return to the login screen. The other login "Todd" works fine. I ran Disk Utility and Disk Warrior with no positive results. I said heck with it and deleted the "Sally" account. I created a new account using the same account name "Sally" and I still can't login (just goes to blue screen). I created another account "test" and it works fine.
    What information still exists, after I delete her account, that is corrupting the new account? And how do I clean it up?
    I don't want to simply create a new account for her with a different name.

    When you create an new account, and delete the new account later with the Systempreference Accounts, specific files, such as caches, temporary files etc., which are created under this account will not removed. They are remains of the deleted user id and still exist in the Librarys.
    For the complete removal of the files, you must find the files with the user id. Normal 502, if this is the second created account.
    Open your Terminal and use
    sudo find / -user 502
    to find the files for the second user.
    Use:sudo find / -user 502 -delete
    to delete the files
    Be sure, that is not your id. Your id should been 501.
    Check it before with id 501 or id name

  • I have icloud installed on a pc when I sign in it says I have a valid apple account but not an icloud account

    I have icloud installed on my pc,when I sign in it says that I have a valid apple account but not an icloud account

    You are getting this message because you are trying to create an iCloud account on a PC.  You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher.  After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

  • I am wanting to add my icloud email account to Windows Live email...during the process i's being asked server type (POP or IMAP) and server address incoming and outgoing  the port boxes already have a nbr. in them, 25 (Outgoing) and 143 (Incoming).

    I am wanting to add my icloud email account to "Windows Live"....During the setup process I'm being asked for server type (POP or IMAP) and server address (Incoming and Outgoing) Where can I find this information?...The port boxes already have a number in them - 25 (outgoing) and 143 (incoming)..do I leave these the same??...also do I check the box "Requires a secure connection (SSL) for both incoming and outgoing???

    iCloud Mail Server Settings

  • Data being Displayed while the Account Name not getting Displayed in FR

    Hi,
    We are facing a strange issue when is user is trying to run a Hyperion Financial report. The data and Entity Name is being displayed whereas the Account name is not being displayed for a particular entity. The user has access to the Entity and accounts. Any Clues ??
    Thanks,
    Addy
    Edited by: Addy on Jan 11, 2011 5:15 PM

    The first thing that pops to my mind is does the format of the cell have Replace checkbox checked with a blank description. thus any results coming back will display as blank.
    Also the customized header is check and it is showing blank.
    A quick test if you have Smart View is can the user access the same data? if yes then the report has a filter of some sort, if the user cannot access the data in smart view, there is a security problem perhaps with the data
    JTS

Maybe you are looking for