Accounting entry missing after settelment

Hi,
I am facing a problem while running of settelement i am not gettting any accounting entry. i will give brief of my scenerio:-
1. Creation of Project.
2. Incurred actual cost/revenue
3. Running RA for Project
4. Settelement of WBS to profitaibility segment.
I need the accounting entry of WIP which is missing after settelment run.
Thanking you
Vishal Kr. Sharma

for your quick reply
yes i can able to see the RA Documents.
and let me know if i missing any transaction in WIP caculation.
Regards
Vishal

Similar Messages

  • Bank account funds missing after refund

    Last week I was going to purchase something from a trusted online retailer (not ebay).I used Paypal at the checkout (aprox. $200). For some reason Paypal had my old billing address on file (not visible to me, on their systems) and it didn't match the one I gave to the retailer. I fixed the address issue with Paypal over the phone, but I ended up canceling the order and using my debit card from my bank account to pay instead. The retailer initiated a refund for my Paypal payment. The next day, ~$200 (the product amount) was deducted from my bank account. I assumed the debit card payment that had gone through normally, but the retailer contacted me to inform me it hadn't gone through, and when I checked my bank statement it appears as "PAYPAL ECHECK" (the first transaction appears as "PAYPAL INST XFER"). I put the order on hold until I could sort this out. Now, the first transaction (the cancelation) has been refunded onto my Paypal balance, but I'm missing $200 from my bank account with no mention of them on my Paypal site. What's going on?

    Hi ReconGhost -
    Sorry for any confusion with this and I suspect this may have already sorted itself out. That being said, if anyone else were to run into this problem here's what happened. When you initiate a bank funded transfer, even if that's refunded seconds later the fully automated processes governing bank transfers have already kicked in and we can't stop the request for the money from going out.
    Now these funds are only going to make it as far as your PayPal balance and wouldn't be sent to the merchant. But when you resent the payment using your debit card you basically sent a second payment that's entirely separate from the first one. So you would see two debits from your bank - one to the merchant and the other, automated one, winding directly up in your PayPal balance.
    By this point I expect that the bank funded portion has cleared your bank and has shown up in your PayPal balance for you to do with it what you will.
    I hope that helps clear everything up!
    - Andy

  • Bill To Account is missing on Service Contract line after customer merge

    Hi
    This probelem relates to service contracts that have customers that were merged. After the existing customer (on the contract) was merged with a new customer the contract address are updated with the the new Customer and Addresses (this is all standard merge fucntionality). The issues is the lines on the contract are not updated properly with the new Bill to Address fromt the merged into customer. The end result is when this contract is invoiced the invoice lines are errroing in AR interface due to the Bill Account being missing.
    Please let me know if you have faced similar situation and what steps did you take to resolve this issue.
    Thanks
    Kundan

    Hi Siddharth,
    Thanks for your reply. The patch suggested by the Metalink Doc ID 353230.1 has already been applied in our case, still this issue. Please let me know if you have some other alterantive solution.
    Thanks
    Kundan

  • Accounting entry line item after 561 movement type

    Hi,
         I have create initial stock uplaod with MB1C with movement type 561, for 4 materials after post of document it is posted properly with proper amount but when I check the accounting entry  it shows me in the amount in two diffrent  debit and credits even the valuation class of all the 4 material is same.
    Debit material account, addition of amount of three materials
    credit initial stock account, addition of amount of three materials
    debit material account of 4th item
    credit initial stock uplaod as per amount of 4th item,
    I want to know why in first entry systen added 3 material amount in one and in second entry amount of only 4th item, when I check the entry in table  BSEG ,the second entry is posted along with business area 0001 where as for the first entry the business are field in the table is blank  even the business area is set the company code and plant level, and only single business area we are using in the system.
    regards,
    zafar

    As you mentioned you have a separate business area this is the reason for posting the entries separately. This is the same case with profit center also (if different PC's are maintained for different material). Also system will proportionately calculate the other expenses (if any) and post in a separate line items in accounting document.
    Regards
    Ayyallas

  • After receiving reciept in which table the accounting entries is going

    Hi,
    IN purchase order
    after receiving reciept in which base table the accounting entries is going to hit ,

    rcv_receiving_subledger.
    Thanks
    Nagamohan

  • User account missing after upgrade to Yosemite?

    I have a mid-2010 iMac which up until recently I had two user accounts on for general use and one for music (Garageband, Logic and audio files etc). After upgrading to Yosemite, this separate user has vanished. I'm left with my original admin account, and a guest login. If I search for any of the files using spotlight, they do show up, but if I try to open them I get the message "you do not have permission to open this document". Also I had folders on the desktop of the music account which contained files, these folders show up in a search but are listed as empty? The files themselves are 'blank white sheet' icons as if they have no application.
    I would assume this is a lost cause if not for the fact that my hard drive (more than half of which was taken up by the 'music' user) still reads as pretty much full up. So have I wiped all this forever?
    Thanks in advance,
    Dave

    retina MacBookPro mid2012. Clean install of OS X Yosemite 10.10
    I'm randomly missing an account at login screen after reboot.
    Sometimes I can fix it with booting into my initial account 'Kevin' (userid 501) and then changing to different login 'Christina' (userid 502).
    But if I log out from my account, the second account is missing. Same if I do a reboot.. This have me in stitches as I ofcause has the need for privacy from each account.
    Both accounts are set up as admins, guest is deactivated.
    rMBP 16gb sep2012.
    userid 501:
    home directory: /Users/Kevin
    userid 502:
    home directory: /Users/Christina
    apart from that... I have loads of problems with Bluetooth, and hand-off only working 1 way (5s with 8.1) where only iOS -> OS X works, not vice-versa.

  • Missing Accounting Entry ( rcv_receiving_sub_ledger & rcv_Accounting_Event)

    Hello,
    Any help is highly appreciated. Below is our problem.
    We have a PO which was reveived in Oct-11 and somehow( a bug maybe ) There was no RECEIVE accounting entries created for this PO.
    Now we are trying to re-create the accounting entries for this receipt and post them in DEC-11
    For October we did a manual JE to balance.
    I've a open SR with Oracle but not getting solution. Here are the steps analyst described.
    1.) Update transaction date in rcv_trx table to december date (lets say sysdate)
    2.) Then run a code where it calls this API.
         RCV_AccrualAccounting_GRP.Create_AccountingEvents(
                   p_api_version => 1.0,
                   p_source_type => 'RECEIVING',
                   p_rcv_transaction_id =>l_parent_trx_id,
                   --p_direct_delivery_flag=>l_direct_delivery_flag,
                   --p_gl_group_id          => l_je_group_id
                   x_return_status => l_return_status,
                   x_msg_count => l_msg_count,
                   x_msg_data => l_msg_data
    And this fails even though the periods are OPEN.
    Here is the log file:
    Receipt_TXN : 6156606
    PO Header ID : 452874
    Consigned PO : N
    Error ocurred while creating Accounting
    l_msg_count : 1
    l_msg_data : FND FND_AS_UNEXPECTED_ERROR N PKG_NAME RCV_AccEvents_PVT N PROCEDURE_NAME Create_ReceivingEventStatement -50 N ERROR_TEXT ORA-01403: no data found
    Receipt_TXN : 6156593
    PO Header ID : 453806
    Consigned PO : N
    Error ocurred while creating Accounting
    l_msg_count : 2
    l_msg_data :
    Thanks

    Hi
    Found the issue, Silly mistake.
    Code had "fnd_client_info.set_org_context" for initialization, It should be mo_global.set_policy_context since we are on R12.
    Thanks
    Manu

  • FI entry missing

    Hi All,
    I have an issue with accounting document generated after doing GR for finished product.in accounting document first entry
    89(PK) 7419000(G/L) finished goods (A/C) is missing and GR/IR clearing is showing with price variance entry too.
    But, for another Gr with same material all these three entries are shoing.Could any one pls let me know why the finished goods entry is missing?
    NOTE : COMPANY CODE is different for 2 GR`s and problematic GR is for outside vendor and succesfull one is Plant as vendor

    Hello,
    Scenario is variant configuration with intercompany process.This is a small project and testing is in process.
    First SO is created for equipment in plant 1111 and with ref to it PR/PO is created for vendor P2222 to send it to 1111 but even vendor 2222 is not having the stock and he again create another PO for outide vendor xxxx .
    In this case there are two PO`s, one with demanding plant 1111 and supplying plant (other co.code)2222
                                                        since 2222 is also not having material it will create another PO to outside vendor
    so we did two GRs and here is the issue with accounting documents.

  • While "Invoice Cancelling- Accounting entry not effected in Trial balance"

    Dear All,
    Any one knows this please revert back.this Issue is very urgent (We have to Close the Periods)
    Issue: While "Invoice Cancelling- Accounting entry not effected in Trial balance"
    Invoice which is cancelled and accounting events for Invoice & Cancellation is taken place, but the entry for cancellation is not appearing in the GL Hence the reversal effect of expense is not seen.
    I can able to see the Reversal Entry in Payables > Reports > View Accounting A
    Here > Tools > View Accounting Events > View Journal Entries > Show Addtional Information > Transfer to GL Status is "No" after that i have Run the Transfer Journal Entries to GL even its not appearing in GL and not transfer to GL.
    @Have to Resolve this as soon as possilble, plz any one can lets guide me
    Reagrds,
    senthil

    Plz Update this asap.....

  • Accounting entry against Excise invoice not created  for Service Tax sales

    Dear all,
        I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
    Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco)  - Domestic(Customer receivable reconciallation) account-Credit entry.
      But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
    Plz. suggest step by step guideline to resolve this issue.
    Thanks & Regards,
    Mukesh Pardeshi

    Hi ReazuddinMD,
    thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
    Now i am geeting error as below at the time of saving Excise invoice,
    No account is specified in item 0000000001
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000000001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

  • Cannot Add a new Accounting Entries - SDK

    Dear Sir,
    I need to add an accounting entry into SAP BO via SDK.
    I am using the following code:
    For iColCount = 1 To lFactorColl.Count
                        '//Search  Accounting information
                        oTable = oDataSet.Tables("DocList")
                        Dim oSRows() As DataRow = oTable.Select("FactorCode = '" & lFactorColl.Item(iColCount).ToString & "'")
                        oJE = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oJournalEntries)
                        Try
                            iIndex = 0
                            oJE.TaxDate = CDate(Right(oDate, 2) & "/" & Mid(oDate, 5, 2) & "/" & Left(oDate, 4))
                            oJE.DueDate = CDate(Right(oDate, 2) & "/" & Mid(oDate, 5, 2) & "/" & Left(oDate, 4))
                            oJE.ReferenceDate = CDate(Right(oDate, 2) & "/" & Mid(oDate, 5, 2) & "/" & Left(oDate, 4))
                            oJE.Memo = "test"
                            '// Set the first lines for the clients invoices - credit side
                            For iRowCount = 0 To oSRows.GetUpperBound(0)
                                iIndex = iRowCount
                                oJE.Lines.SetCurrentLine(iIndex)
                                'sAccountKey = GetAccountKey(oSRows(iRowCount)("CardCode"))
                                oJE.Lines.ShortName = oSRows(iRowCount)("CardCode")
                                'oJE.Lines.AccountCode = oSRows(iRowCount)("CardCode")
                                'sAccountKey = GetAccountKey(oSRows(iRowCount)("FactorCode"))
                                'oJE.Lines.ContraAccount = sAccountKey
                                sFactor = lFactorColl.Item(iColCount + 1).ToString
                                oJE.Lines.Credit = CDbl(Replace(oSRows(iRowCount)("Amount"), ".", ","))
                                sTotalAmt = sTotalAmt + CDbl(Replace(oSRows(iRowCount)("Amount"), ".", ","))
                                oJE.Lines.Add()
                            Next iRowCount
                            'Set the factor line - debit side
                            iIndex = iIndex + 1
                            oJE.Lines.SetCurrentLine(iIndex)
                            'sAccountKey = GetAccountKey(sFactor)
                            'oJE.Lines.AccountCode = sFactor
                            oJE.Lines.ShortName = "02"
                            oJE.Lines.Debit = sTotalAmt
                            oJE.Lines.Add()
                            If oJE.Add = 0 Then
                                Dim num As Integer
                                oCompany.GetLastError(num, sStr2)
                                SBO_Application.MessageBox(sStr2)
                            Else
                                SBO_Application.MessageBox("Import was successful!")
                                oJE.SaveXML("c:\JournalEntries" + Str(oJE.Number) + ".xml")
                            End If
                        Catch exception1 As Exception
                        End Try
                    Next
    this code does not generate any error but no accouting entry are entered although if i try to enter it manually, it is saved in the database.
    please advise what it is wrong in my code making it not working properly.
    PS: both credit and Debit side in my entry is using the BP code and not G/L account.
    Best Regards

    There are a couple of things that I noticed, if I'm reading your code right.  First, it appears you are
    issuing the oJE.Lines.Add()  command at the end of your loop (which would be in preparation for filling that line with data after reading the next row back at the top of the loop).  If that's the case then when you fill your last good line item with data, you're going to add a blank line into the object, and I think that would fail.
    Also, it appears that when you try to add the Journal entry with the code I've copied below,
    you are only checking for error messages when the Add succeeds:
    If oJE.Add = 0 Then
    Dim num As Integer
    oCompany.GetLastError(num, sStr2)
    SBO_Application.MessageBox(sStr2)
    Else
    SBO_Application.MessageBox("Import was successful!")
    oJE.SaveXML("c:\JournalEntries" + Str(oJE.Number) + ".xml")
    End If
    I think that the first line of code, above, should be if oJE.Add <> 0 then....
    Are you getting your message that says "Import was successful!")?

  • Procurement of Capital Goods-Accounting entries error

    Hi All
    I processing procurement of Capital Goods scenario.
    Qty - 1; Base Amount: 100; BED: 16%; AED: 8%; SED: 4%
    When I posted Goods Receipt, I beleive the accounting entries are expected to be as follows:
    Dr  BED  16
    Dr  AED   8
    Dr  SED   4
    Cr  CENVAT Clg 14-
    Cr  CENVAT On Hold 14-
    But the Part II entries are like as following after posting the GR:
    Dr  BED  8+
    Dr  AED   4+
    Dr  SED   2+
    Cr  CENVAT Clg 24-
    Dr  CENVAT On Hold 10 +
    Could you please help in this regard
    Best Regards
    Rahul

    for capital goods u can't claim the whole excise that u have paid, it will be only 50% u can claim for the first year..

  • Production order settlement (Accounting entries)

    Dear Sapians,
    I need your advice to clear my following confusion:
    I have a finished material which is maintained on Variable price in material master. Assume the price being 100 and only 1 item is in stock currently.
    My production department produces 1 qty of the same material now and the total cost of that comes to 500.
    Now when the finished goods GR is done to store. The material price booked is picked from the current material master price (i.e) 100. The system posts the following entry
    FG Stock A/c Dr 100
       To Cost of good sold 100.
    Now the production department is doing the settlement of the above production order. After settlement my material master price changes from 100 to 300 (i.e) 2*300=600. (I find no accounting entry generated during settlement) What actually happens during settlement?
    When the goods is delivered(PGI) for sale to the customer. (eg) we sell one unit
    The system passes the following entry:
    Cost of goods sold A/c Dr      300
      To FG Stock A/c                    300
    I this above case i feel that my finished goods stock will go negative. 
    Is the above activity correct?.
    I will be greatful if you can explain me the above process completely.
    Regards
    Naveen

    Dear Deepak
    Thanks for all your help. I have assigned the maximum point which i can for your support.
    Actually the accounting entries i was looking for is as follows:
    When 101 is done after production (i.e) GR after production
    FG STock A/c
    To Factory output A/c
    The above entry is posted @ price maintained in the material master.
    When the actual settlement of Production order is done using tcode KO88 the system posts the variance between the material master price and the actual price and posts
    FG Stock A/c DR
    To Factory output A/c 
    (in case of actual cost is more than the material master price)
    OR
    Factory output A/c
    To FG Stock
    (In case of actual cost is less than the material master price)
    Please correct me if i am wrong
    Once again thanks for you time
    Regards
    Naveen

  • Third Party Miro accounting Entries

    Hi all
    what is the accounting entries after MIRO in  third party process
    Where material delivered from Vendor to Customer directly and vendor bill to company
    Edited by: sandipamore on Sep 21, 2011 8:45 AM

    Hello
    Accounting entries for 3rd Party Sales:
    After MIRO
    Vendor Account - Cr
    GR/IR Clearing A/c - Dr
    After  VF01
    Customer Account - Dr
    Sales Revenue A/c - Cr
    Regards
    JP

  • Not able to clear bank statement accounting entry with payment document.

    Hello FI guru,
    We are facing  problem to clear bank statement accounting entry with payment document  posted via t.code F110 (Automatic payment program).
    There is only single entry for payment in bank statment . But many entries in F110 for different vendors. Will posting the bank statement entry i.e Bank clear account Dr
                                        To Bank main account
    Its post with an error Error F5 263 the diference is too large.
    We are using muticash format & we have use 4 which clear Dr GL
    Request your help to resolve the problem Whether we missed any configuration or we have develop program for the same

    Hi,
    This error generally is due to tolerance error. Please check the assignment of the user id with the relevant tolerance groups. Let me know if it worked.
    or go through the following link
    F5 263 - The difference is too large for clearing
    BR,
    Satya

Maybe you are looking for