"Accounts and entities do not match data in application OWNERSHIP failed"

Hi experts,
We are executing the IC Elimination package and we get next error:
"Accounts and entities do not match data in application OWNERSHIP failed"
We have entered the ownershipdata, post the correcta data, executed the currency conversion but the status package is error and gives the reported message.
Did it happen to anybody? How can we solve the problem?
Regards.

Hi Dani, thanks a lot for your reply.
I am running BPC 7.0.0.8 SP8
I've turnned ELIM property of ENTITY to blank as you suggested.
Now I get another error:
DATA FOR CATEGORY C_100 NOT FOUND IN APPLICATION LEGAL.
Looking into the LEGAL cube I have data for C_100....
Do you have any idea?
Thanks a lot again...
Jadir

Similar Messages

RUN LOGIC:Accounts and entities do not match data in application Ownership (BPC10.0 NW)

Hello Experts,
During execution of the legal consolidation package we get the following error: "Accounts and entities do not match data in application OWNERSHIP"
We have entered the ownership and transaction data.
Could you, please, help us to solve the problem?
Thanks.

Hi
The Ownership has accounts like Percentage consolidation etc. Please check if you have selected the correct ones, marked as use in consolidation process and loaded Ownership data aganst those .
Regards
Surabhi

Accounts and entities do not match data in application OWNERSHIP

Dear experts,
During execution of the legal consolidation package we get the following error:
"Accounts and entities do not match data in application OWNERSHIP"
We have entered the ownership and transaction data.
Could you, please, help us to solve the problem?
Thanks.
Mila

This problem occurs when your Legal application is not in synch with your Ownership.
See below what you have to do to fix this problem.
I am considering you are using BPC for NETWEAVER.
If you are using BPC for Windows, then you gonna have to check some other properties too. ok?
Here we go.
LEGAL APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
USELIM = 1 (if you gonna use US elimination)
VALIDATIONS = 1 (if you gonna use "online" validations entered in Netweaver)
OWNERSHIP APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
After setup web parameters, go to BPC console and check the following dimensions:
(I am mentioning just the ones you need to setup for the consolidation)
C_ACCT
This is your account, and if you are using SAP ECC it should be equal to 0050 accounts of your GL (for example)
In this dimension, you must check the following properties:
ID - NEVER, I repeat NEVER, use lower case letters since BPC is case sensitive.
     ALWAYS USE UPPER CASE, FOR EXAMPLE, MY ACCOUNT ID'S ARE:   VLD_PL_INV,   VLD_PR_INV and so on.....
     This is valid for all dimensions or any other ID you gonna create in BPC.
RATETYPE - must setup and must be the ones you gonna use in your RATE application
DIMLIST2 - must use to GROUP your accounts for eliminations or any other automatic adjustment
C_CATEGORY
This is your consolidation categories used to link data you gonna load to your Legal InfoCube.
You must have C_100 for example, for your Actual Version.
You can use the ones that comes with APSHELL C_CATEGORY. It is fine.
C_DATASRC
This is just to TRACK your entries.
Create as many data sources you need and you gonna use.
You can use the ones that comes with APSHELL C_DATASRC. It is fine.
ATTENTION for the following properties:
DATASRC_TYPE - I for input (all the entries, transaction data from txt or ECC) and A for automatic adjustments
IS_CONSOL - Y means that ALL entries in the Legal infocube must be considered for consolidation
IS_CONVERTED - Y means that ALL entries in the Legal infocube must be converted to the GROUP for consolidation
DATASRC_STAGE = Y (allways Y)
ENTITY
ID and PARENTH1 must be entered and must reflect your company hierarchy.
INTCO - inform the associated Inter Company.
CURRENCY - You must inform the currency of the company otherwise IT IS NOT GONNA WORK.
           This currency ID must be setup IN ALL the currency dimensions.
In this entity you must enter:
1-All the companies
2-ALL TECHNICAL COMPANIES for the consolidation to work
3-ALL TECHNICAL COMPANIES for VALIDATIONS (if you gonna do you validations thru script logic to
have better control of accounts and values).
ATTENTION:
JUST FOR THE TECHNICAL COMPANIES FOR CONSOLIDATION YOU MUST INFORM Y   TO THE ELIM PROPERTY.
Leave it blank for all the other companies.
FLOW - you can use the one that comes with APSHELL
GROUPS
If your version of BPC is 7.0 than this dimension has two objectives.
First Objective - store all the currencies.
All you company data must be loaded with LC currency i.e. in the Legal InfoCube, you gonna see LC in the GROUPS column.
This is you Local Currency, so NEVER delete it.
These currencies must have the following properties setup:
REPORTING - Y for any other currency you insert, X for LC currency, X for Transction Currency.
CURRENCY_TYPE - R for reporting, L just for LC currency, T for the transaction Currency
Leave all the other properties blank!!!!
Edited by: JADIRM on Nov 7, 2010 3:23 AM

Accounts and entities do not match in application ownership

Hi all,
I'm working on NW 7.5 SP07 (upgrading in SP09 isn't an option at the moment) and when running Consolidation i am getting the error "Accounts and entities do not match in application ownership".
I am very familiar with Consolidation and created consol appsets numerous times, so I am confident I have set up the dimensions correctly (with all the right properties), appset and app web parameters all look ok, business rules are good, ownership and rate data is all in correct place...but no matter what i do i still get this error.
FX, carry-forward and calc accounts all work ok, so it is simply something wrong with the ownership app or with how finance is talking to it.
There was only 1 thread I could find where others had this issue - many people had the same problem and there was never a clear solution to it ..... [Accounts and entities do not match data in application OWNERSHIP;
Any ideas besides upgrading to SP09?
Tom.

Hi Tom
Thank you for answer. I found some missing data in my ownership cube and now 'Accounts and entities do not match in application ownership' gone but new error appears after validate script in se38 'GETWA_NOT_ASSIGNED'. Have you ever had this kind of error?
SAP sent me some tasks list but it seems to me that I have all settings they sent in that document.
I have a couple of questions and will be very appreciate if you can answer me.
Are additional members in O_Acct necessary? If I use only METHOD PCON PGROUP POWN in my input schedules.
METHOD_SYS
PCON_SYS
PCTRL
PCTRL_SYS
POWN_SYS
POWND
POWND_SYS
Are you using those above for your consolidation process?
Are you using dynamic hierarchy editor or input schedules to maintain your ownership data?
Regards!
Justyna

AddOnsLocalRegistration.sbo file does not match data in the common datab...

We are receiving the following error everytime we logon our pc for the first time: Add-On Outlook_Integration: This Add-on cannot be upgraded. AddOnsLocalRegistration.sbo file does not match data in the common database for this add-on. See SAP Note 1323680 for more information.
A few months ago, SBO Server was moved from one server to a new virtual server, but we had no problems with the addons. The other day, we upgraded from SBO 2007 to 8.8 and now we are having problems with the Outlook Integration.
I have followed the directions in the message noted above, and did find the AddOnsLocalRegistration.sbo file in some odd places, with a reference to the old server. I cleaned this up, on the server and the client and I can get it running...however, after the user shuts down the pc and logs back in the next day, the problem is back.
In the process of cleaning this up (un-registering the addon and removing the addon references in the local .sbo file) I noticed at times that we would still receive this error, when there really shouldn't be an reference to it.
Thanks for any help.

Hi Vaughn.........
I guess you need a re installation of Outlook Integration Addon.
Whatever version addon of OI you installed just uninstall it and Install it freshly from 8.8 setup package......
Regards,
Rahul

I have a problem in activate Alaaclaud account and I can not open the device

السلام عليكمI have a problem in activate Alaaclaud account and I can not open the device

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

TS1702 Unable to make an in-purchase. App says the account and apple ID dont match and i must install the app.. The original app is no longer available, the game and account were updated. Thank you

Unable to make an in-purchase. App says the account and apple ID dont match and i must install the app.. The original app is no longer available, the game and account were updated. Thank you

You will need to login on the device using the same exact Apple ID that was used to download the app. You can not use abother account login to buy in app purchases to prevent fraud.
If you keep getting this warning, you are not logged into the original account.

've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

iPhones require a SIM for activation.
Put the device in DFU mode (google it) and restore via iTunes.

I updated my iPhone with latest update. I was asked if I wanted to communicate with iCloud for all my devices. I chose yes. I than am told I need to check my email to verify my account and there is not an email for apple to verify

I updated both my iPad and iPhone with latest update. Love it! However, I wanted to use the find iPhone using iCloud feature. From the beginning of update it kept prompting me to verify my account when I wanted to use iCloud ??? Apple kept telling me to check my email to verify my account and there is not an email from them. And I'm not talking about verifying by my alternate email which I was successful at.

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

HT5622 I have just received a new iphone 5s and need to set the Apple ID with my work email. I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use my work email as the Apple ID on my new iphone. What do I do

I have just received a new iphone 5s and need to set the Apple ID with my work email. I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use this email as the Apple ID on my new iphone. As it is a work phone I need to use this email address as my Apple ID. How do I do this?

when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks

You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser.

IMovie will not import or play the clips at the proper speed and the audio and video do not match up.

i have a samsung hd camcorder. it records at 40 fps, but iMovie will not play the clips at the proper speed and the audio and video do not match up. I have tried to record at standard quality to no avail. Help. thanks in advance.

samsung sc-hmx10c ntsc
im guessing that is the speed it records at due to the fact imovie puts a blue 40 at the top left corner of every clip i import.

Storage Breakdown On iTunes and iPhone Do Not Match Up

I will preface this question by providing the following information:
Computer Information
Model: MacBook Pro, mid 2009, 15 inch
Capacity: 1 TB
OS: Yosemite (10.10.1)
iTunes Version: 12.0.1.26
iPhone Information
Model: iPhone 6 Plus, purchased early 1/2015
Capacity: 128 GB
OS: iOS 8.1.2
Okay here's the problem. I was attempting to sync my iPhone 6 Plus with my iTunes library. I have about 50 GB of music which I normally carry around on my iPhone, which amounts to about half of my total storage. On my latest sync, I was told in iTunes that I do not have enough space to complete the sync. Here's what the display looked like:
As you can see:
> The total capacity for audio is displayed as being 49.67 GB (aprox. 6889 songs).
> The total capacity for photos is displayed as being 6.89 GB (aprox. 10,647 photos).
> The total capacity for apps is displayed as being 5.04 GB (aprox. 110 apps).
> The total capacity for other is displayed as being a whopping 45.08 GB.
Upon seeing this, I'm shocked that the other category is taking up so much space. I immediately go to my iPhone to begin trying to eliminate things that could possibly be taking up all this space. When I take a look at my iPhone usage, I see this:
As you can see, the photos and apps are approximately correct, but the songs are way off. In addition, the free space I have on my iPhone according to iTunes is 6.12 GB. According to my iPhone though, I have 47.1 GB (see the screenshot of my iPhone above).
Essentially the storage breakdown on my iPhone and iTunes does not match up. I'm not sure how to fix this problem without restoring the phone, which I want to avoid doing if I don't have to.
Has anyone else had this problem? If so, is anyone aware of a possible solution?
Thanks.

If it was an iOS bug I would expect to see it on the 3 devices I have upgraded to iOS 8. I don't see it on any. I would also expect there to be thousands of posts and views about it, as somewhere over 100 million users have updated. This is the only thread I have seen, and you are the only one posting about it.
Go to Settings/iCloud. Turn off Find my iPhone. Then go to Settings/general/reset - Erase all content and settings. Check your "Other". I would expect it to be minimal.

HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png ‏5 KB
averages of 10.vi ‏9 KB

"Accounts and entities do not match data in application OWNERSHIP failed"

Similar Messages

Maybe you are looking for