Accounts Created in Chart of Account
Hello,
Please tell me the T code to find out the list of accounts which are created in Chart of Account.
Thanks in advacne.
Sanjay Darji
Hello,
Please check your selection criteria.
You must have restricted your "Maximum number of hits to 200".
Please change it to maximum number like 99999
You will get the full list.
Regards,
Ravi
Similar Messages
-
Error while creating group chart of accounts
hi
i am learning sapfico now.while i was practicising to create group chart of accounts ,i got an error"group chart of accounts not created to a/c no 111111.".first i created chart of accounts code for group chart of accounts.then i have created chart of accounts per company code.like wise i have created 2 account groups and 2 retained earning a/cs(1 for per company code & 1 per group chart of account purpose)
while i was creating GL master records in FS00 i got the error like that.any any body please help me.Hi,
Have you entered "111111" in the filed group account number? If so, this account should be available / created in your group chart of account.
Hope it helps
Saravanan.A -
Error depreciation run "GL account 2999999 not created in chart of account"
Dear all,
I am facing a very confusing error message. My customer has been live with SAP for over 2 years, and everything has worked fine. This month period 9) they got an unexpected error message during ordinary depreciation run. No depreciation is posted on GL accounts but if you look at asset values in AW01N you can see depreciation is posted on every asset. When I try to run restart depreciation in test mode I get an error message f5507 "GL account 2999999 not created in chart of accounts CASE". I do not understand anything. Why would this account suddenly after 2 years be used in depreciation run? It has never been created or ever used before? I have looked in transaction AO90 and the account is not there.
Very thankful for any help!
Thanks in advance!
Regards, ÅsaHi,
1 - Execute dep test run with list asset check box, then find is there any new assets created with new asset class
2 - Check in AO90 Dep folder
3 - Check retained earning account either existing or not (T.Code: OB53)
4 - If you are using document splliting Check Docuemnt splliting Zero balance GL account
Regards
Viswa -
Need help in creating a chart from 3 datasets
Need help in creating a chart in SSRS from 3 datasets
Can someone help me in creating a chart from 3 datasets, however datasource is same.Thank you Olaf...
could anyone help me in using union all with the below
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value ,
CASE metricid WHEN 16 THEN 'FCR' ELSE 'Cases' END AS metric
FROM XXXXXX AS V
WHERE metricid IN (16, 11)
AND row_date BETWEEN '2012-01-01' AND '2014-10-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'Cases',
metric
FROM a
WHERE metric = 'cases')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'FCR',
metric
FROM a
WHERE metric = 'FCR')
, d AS (
SELECT b.YEAR, b.MONTH, c.FCR, b.Cases
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.fcr <> 0 AND b.cases <> 0
,E AS (
SELECT [Year], [Month], SUM(FCR) AS FCR, SUM(Cases) AS Cases
FROM d
GROUP BY [Year], [Month])
select YEAR, MONTH,
CASE MONTH
WHEN 1 THEN 'Jan'
WHEN 2 THEN 'Feb'
WHEN 3 THEN 'Mar'
WHEN 4 THEN 'Apr'
WHEN 5 THEN 'May'
WHEN 6 THEN 'Jun'
WHEN 7 THEN 'Jul'
WHEN 8 THEN 'Aug'
WHEN 9 THEN 'Sep'
WHEN 10 THEN 'Oct'
WHEN 11 THEN 'Nov'
WHEN 12 THEN 'Dec'
END AS MonthName
,e.FCR AS FCRCases
,e.Cases AS TotalCases
,CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
--,CONVERT(DECIMAL(18, 2),(e.FCR/e.Cases)*100) AS FCRRaw
from e
order by YEAR, MONTH
**************2nd query*************
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value,
CASE metricid WHEN 56 THEN 'numerator' ELSE 'denominator' END AS metric
FROM XXXXXXX.[Values] AS V
WHERE metricid IN (56, 10)
--WHERE metricid IN (11,16)
AND row_date BETWEEN '2013-10-01' AND '2014-02-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'numerator',
metric
FROM a
WHERE metric = 'numerator')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'denominator',
metric
FROM a
WHERE metric = 'denominator')
, d AS (
SELECT b.YEAR, b.MONTH, c.denominator, b.numerator
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.denominator <> 0 AND b.numerator <> 0
, e AS (
SELECT [Year], [Month], SUM(numerator) AS numerator, SUM(denominator) AS denominator
FROM d
GROUP BY [Year], [Month]
SELECT *,
CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
FROM e
ORDER BY 1,2
******************3rd query**************
WITH a AS (
SELECT --L.[LocationGroupId],
-- T.locationid,
-- T.AccountId,
TR.datestamp,
/*Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01'*/
TR.Period AS ValueDate,
CASE WHEN TR.TargetResultState = 0 THEN 0 WHEN TR.TargetResultState = 1 THEN 1 WHEN TR.TargetResultState = 2 THEN 1 ELSE 0 END AS Met,
CASE WHEN CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') > T.Startdate AND CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp))
+ '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') < T.Enddate THEN 1 ELSE 0 END AS ActiveTarget
FROM XXXXXX AS TR
INNER JOIN dbo.Target T ON TR.TargetID = T.ID
--INNER JOIN dbo.Location L ON T.Locationid = L.Id
WHERE --locationid <> - 1 AND
TR.Period IN ('201306', '201307', '201308', '201309', '201310', '201311', '201312', '201401'))
select ValueDate, SUM(Met) AS Met, Count(ActiveTarget) AS ActiveTargets,
right(ValueDate,2) as Month
,left(ValueDate,4) as Year
,CASE
WHEN right(ValueDate,2) IN (11, 12, 1) THEN 1
WHEN right(ValueDate,2) IN (2, 3, 4) THEN 2
WHEN right(ValueDate,2) IN (5, 6, 7) THEN 3
WHEN right(ValueDate,2) IN (8, 9, 10) THEN 4
END AS 'Quarter'
from a
group by ValueDate
order by ValueDate -
How to create a chart with dates?
I've created a table with projects I have to deliver and the date they were delivered. I would like to create a chart from this data - however I can't figure out how to use date in the chart.
Ideally the chart would work with the date (lets say from jan 01 to april 5) on the x-axis and the project on the y-axis. And a line that goes from time A (which marks the initial part of the project) to the time B (which marks the delivery date) defined on the table.
Is it possible?
heres a pic of what i mean:
/Users/judavies/Desktop/Screen shot 2011-01-14 at 11.36.12 AM.png
Message was edited by: jujudaviesHi Jerry,
I'm ALMOST there! If you could help me with one last thing it would be amazing. I've uploaded my number project and you can downloaded it on the link bellow, if you prefer.
I managed to do the same idea chart as you have. However I would like to have two bars for every JOB (y-axis). On my table i've inputed for every job 4 values = START DATE that was scheduled / Duration period scheduled (this happens prior to the job itself // START DATE Delivered / Duration Period Delivered (this is the actual time the JOB took place). This way I can see at the end of a JOB if I worked during the period I planned.
using your example on the chart above (your reply) Could Proposal have a bar 1.0 / 4.0 - and bellow this bar have another one (with different colours) that went from 2.0 / 5.0 - for example? - the first one representing the "scheduled dates"and the second one representing what actually happened.
I managed to do the four bars but couldnt manage to have them bellow each other.
Tks again for your help
files.me.com/jujudavies/wgugl1.numbers.zip
x'jul. -
How to create this chart in Numbers?
The sample chart such as following web site:
http://gallery.mac.com/chouwenpo#100008/-E5-9C-96-E7-89-87-203&bgcolor=black
I want to create this chart by "line+symbol chart".
The x-axis need to be an "interval".
Please, help me if you know how to do this.
Thank you a lot.
wenpoI do appreciate your kindness reply.
Please let me repost my question and express my concern again
I look forward from you guys.^^ I do need your help!
Thanks again.
<<Question repost>>
for example:
Assume we have 10 (x, y) pairs as below:
(10,10), (12,23), (47,9), (63,24), (88,100), (150,41) ,(155,166), (188,2), (198,58) and (500,200). Each (x,y) pair is a single point in the graph.
If we use Scatter chart to handle these data, the output graph is fine but not suitable for me to use.
I wish there will be a trend line between two of each independent points of Scatter graph, and obtain a graph just like the output graph as used in Line chart (line+symbol).
That is, in Line chart, the values of x-axis(with equal-width intervals) are categorical; however, my data is ordinal value or continuous value (like Time, Concentration...etc.). I wish this software has the ability to show the interaction between each points.
Message was edited by: wenpo -
Hi,
I am trying to create a Chart Web Part that is connected to a list.
I inserted a Chart Web Part on the page.
In Step 1, I chose, Connect to a List.
In Step 2, I chose the List, "QPAPForm"
After I connect to the list (QPAPForm), and I get to step 3 to Retrieve and Filter Data, I have the following error message: "Please correct the following: A column named "Update Policy Tasks" already belongs to this Data Table.
"Update Policy Tasks" is a Workflow used on this list (QPAPForm), but it is not a column value per se.
How do I correct this issue?
Thanks,
JanHi,
I have done a test, and I can’t reproduce your issue.
I created a custom list and an approval workflow which generated an column in the custom list. Then created a Chart Web Part which was connected to the custom list, I didn’t meet any error.
Let’s verify the following:
What template is your List template? what columns does the list has?
What kind of workflow has generated the “Update Policy Tasks” column?
I suggest you re-create the list without workflow and do a test, compare the results.
Best Regards
Lisa Chen -
How do I create a chart in Keynote that auto-updates from data in Numbers?
Hello all! So, there are lots of answer to this for iWork'09, but I haven't found them for the current version of Work.
What I'd like to do is take data from Numbers and create a chart in Keynote that would then auto-update if I edited the data in Numbers. Put another way, the Keynote chart data would 'live' in Numbers - every time I edit the Numbers data, I'd like those changes to reflect in Keynote. Any thoughts on how to do this outside of always cutting and pasting from Numbers to Keynote?
Thanks!!Thanks Gary. I thought I was crazy. I remember that it used to be available - bummer that it's not now.
-
Post Author: ujain82
CA Forum: WebIntelligence Reporting
Hello, I am having trouble creating pie chart. I am calculating different count values from different data providers. Now I need to create a pie chart showing the proportion for each count as I can find the percentage of count.
My scenario(task):I need count on persons depending on searching on complaint text. So for each search I have a data providers. Like this I am searching for 8 criteria. So I have different data providers for each search. I get person counts from each criteria.
Now I want to show it in a pie chart. But I could not make it done.Does anyone faced a similar problem? How do I solve my problem?
Any comments?Post Author: Chris Chen
CA Forum: WebIntelligence Reporting
Hi ujain82,
Because you have some data provider,so some metric may have no conjunction,i suggest that you creat variables to reuse them. -
How to create business charts in Forms 10g?
In the old days, before and in 8i, we can still create business charts using Graphics Builder with the following graph types. How can we build business charts in forms 10g?
Column: Shows discrete values using vertical columns
Bar: Shows discrete values using horizontal bars
Gantt: Shows task or project scheduling information using horizontal bars
High-Low: Shows multiple Y-axis values for each X-axis point
Line: Shows data values as points connected by lines to show trends
Mixed: Combines a column and line chart
Pie: Shows how individual data values contribute to an overall total
Scatter: Plots 2 sets of potentially related data to identify possible trends
Table: Shows text data in a table
Double-Y: Shows a column or line chart with multiple values for the same X-axis valueOn the samples page on OTN there is a piece on how to use BI beans to achieve business charts. Search for "BI bean Graphs in Forms".
-
Creating SVG Chart with multiple lines
Hi All,
I want to create a chart with multiple lines.
Ex: I have one emp table with empno, sal and deptno columns.
I want to print deptno in x axis and no of employees on y axis.
I want to print one line for employees with sal > 15000 and one more line for employee with sal =< 15000
So one line will show no of employees with sal more than 15000 for each dept. Similar case for the other line and these 2 lines should be in different colors.
For one line the query will go as
select link, deptno, count(empno)
from emp where sal > 15000 group by null, deptno
Is this possible to draw this chart?
Thanks,
ManojI wasn't able to do something like what you describe, but I was able to do this:
I defined column A of the table as a Header Row, selected the cells in the table, and chose this chart type (2D 2 Axis):
Then I clicked the chart and in the pane at the right checked 'Axis Name' in the Axis tab and added the axis names.
Maybe this can give you an idea of how you can illustrate the relationships that you want to show.
SG -
Need to create a chart in summary page and link it to data
I need to create a chart in a XL worksheet that contains other summary information. I am able to create a chart in a seperate sheet but i simply cannot find a way to insert a chart into a worksheet already containing some information. To make it clear, my requirement is as follows:
Inser a chart in cell 'X,Y' with a dimention of 'W,H' and link the chart data to some data in some other page 'sheet1'.And that answr is?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Can you put line break in text in the data box when creating a chart.
i.e. if you have a bar chart with text underneath each bar, can you break it when you’re entering it instead of manually afterwards
Thankshttp://help.adobe.com/en_US/illustrator/cs/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html
See "Enter labels" -
how to create pie chart in jsp based on sql server 2000 database
please give example or code with explanationhttp://sourceforge.net/projects/jfreechart
- Saish -
How can I create a chart using data (from formulas) in my header columns?
Hello,
I'm wanting to create a chart using formula totals in my header column. When I attempt to click on the chart icon after selecting my header column, the chart button doesn't appear. Any help would be greatly appreciated. Thanks!Move your formulas in a non header column.
In the cell A2 of the table "aux", the formula is :
=IF(ISBLANK(main :: A2),"",main :: A2)
then I applied Fill Down.
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 15:07:54
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
Maybe you are looking for
-
A research group has developed a data acquisition system dedicated to daily observations of solar phenomena at radio waves using high time resolution (5-100 ms). First, the analog signal from the antenna (1000-2500 MHz) is sent to a spectrum analyzer
-
I downloaded a movie from iTunes. I wanted to burn a DVD of the movie which I could play on my home entertainment system. After I had burned the DVD I tried to play the movie from it on the computer and got the message " You can't open the applicat
-
Creation of IDoc XML very slow compared to IDoc Flatfile
Hi everyone, I did a test in our ERP6 system and created IDoc files for a few invoices. The result is that the creation of a XML Idoc is 22x slower than the creation of a flatfile Idoc. The creation of one large IDoc file with 1000 invoices took ~15
-
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
Hi BW Guru's We have install the Standard Data Targets from Business Content. Now i want to do the same for Master Data can any one help me in selecting the relevant master data data sources for the following Data Targets. Your help will be apprecia
-
Change Request for records in table
Dear all, I want to create a Change Request to include all the records in my Z table, by using the SM30, I don't want to change record by record, as the table includes hundreds of record. Could any body tell me? Best Regads, Jack