Accounts Receivable Analysis: Error in DataStore object 0FIAR_O03
Hi!
I am facing with accounts Receivable Analysis Best Practice.
When I try to activate the both DataStore Oobject 0FIAR_O06 and 0FIAR_O03 in tcode RSORBCT I get the following error:
Data source 0DBDUNS_IMPORT_ATTR not maintained- RSAU231
Can some one help me to solve this problem?
Thank you very much!
Axel
Hi!
Many thanks for your response.
I use SAP Solution Manager EhP1 that have:
SAP BW 701 : SAPKW70102
BI CONT 704 : 0001
In tcode RSA6 I could find the Data sources 0FI_AR_6 and 0FI_AR_3.
Could you please help me how to proceed?
Thank you very much!
Similar Messages
-
Accounts Receivable Analysis Best Practice: Company Code
Hi!
I implemented SAP Best Practice scenario "Accounts Receivable Analysis" and would like to execute the queries from this example.
The query cannot unfortunately because one of the attributes Company Code is mandatory.
When I put one of the possible values e.g. "0001" I get the following error:
Company Code (Single Value Entry, Required) ()*
Value "0001" for variable "Company Code (Single Value Entry, Required)" is invalid
Message no. BRAIN643
Diagnosis
Characteristic value "0001" is not valid for variable Company Code (Single Value Entry, Required).
Procedure
Enter a valid value for the characteristic. The value help, for example, provides you with suggestions. If no information is available here, then perhaps no characteristic values exist for the characteristic.
If the variable for 0DATE or 0CALDAY has been created and is being used as a key date for a hierarchy, check whether the hierarchies used are valid for this characteristic. The same is valid for variables that refer to the hierarchy version.
Question
How to execute this query?
Thank you very much!
regardsHi!
Many thanks for your response.
What do you mean with your question?
I load transaction data with tcode RSA1
(0FI_AR_4 and 0FI_AR_6).
Do I need some addtional steps to execute? IF yes, which?
Thank you very much!
regards
Axel -
Error activating DataStore Object
Hi
I have created a DSO and put in some key fields and data fields.
During activatation, I encountered the following errors. Pls help !
Internal error occurred when writing..
Error while saving change log for DataStore Object..
Error during creation of DDIC sources of DataStore Object...
Thanks !Hi M
I can only locate this link
SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE
I cant find the following option !
SET THE PARAMATER SETTINGS FOR DSO
I then went to SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE>Performance Settings>Maintain Runtime Parameters of DSO
I try to do some settings but I cant even locate my DSO since it is not activated.
Pls help, tks.
Edited by: Lay Tin Koh on May 9, 2008 10:22 AM -
Errors in datastore object in BI 7.0
Hi Guys,
While loading data into the Datastore object i am getting the following errors:
Getting the records into the NewData Table but not into the Activedata and Changelog Tables.It wa showing the errors like this:
Activation of Data / 26.02.2007 / 18:17:34
Main Process
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Resource error. No batch process available. Process terminated
SID Generation
Data Package 000001
Resource error. No batch process available. Process terminated
Pl send me the solution for this.I need it imdtly.
Points will be awarded
Thanks,
ChinnaHi
try to activate your ODS manually..there could be some batch processes(for background) and some update programs..when you are doing it in background you are getting that error i think..do it manually..
Hope it helps
Thanks
Teja -
Oracle Account Receivables Lockbox Error, No ITEM NUM on PAYMENT record type.
Hi,
For "Process Lockbox" program. The program completes normally, but receipts are not created and I am getting below error in log file:-
"AR-ARLFMT: No ITEM NUM on PAYMENT record type."
This error message is similar to error message mentioned in note id (Troubleshooting Known Issues In Lockbox (Doc ID 1366298.1)) :-
2.10. Lockbox ends with error: "AR-ARLFMT: No PAYMENT NUM on PAYMENT record type"
Symptoms
You are trying to run lockbox and receive this error message in the log file:
AR-ARLFMT: No PAYMENT NUM on PAYMENT record type.
Your lockbox interface program has completed successfully, however,there is No Data Found in the AR_PAYMENTS_INTERFACE table.
Solution
Responsibility: Receivables Manager
Navigation: Setup > Receipts > Lockboxes > Transmission Formats
For the Transmission Format name that you are using, make sure that there is a 'Transmission Record' defined and that there is a Transmission Field with a Field Type of 'Record Identifier' defined.
Make sure to include the check number in Transmission Format and Control file
and item number is:-
Item Number: A sequence number that your bank assigns to a specific payment. This number associates an invoice with a receipt.
I am passing item number, but still I am getting this error.
Can anybody please help.
Thanks in advance.
Regards
Gagan GargHi,
For "Process Lockbox" program. The program completes normally, but receipts are not created and I am getting below error in log file:-
"AR-ARLFMT: No ITEM NUM on PAYMENT record type."
This error message is similar to error message mentioned in note id (Troubleshooting Known Issues In Lockbox (Doc ID 1366298.1)) :-
2.10. Lockbox ends with error: "AR-ARLFMT: No PAYMENT NUM on PAYMENT record type"
Symptoms
You are trying to run lockbox and receive this error message in the log file:
AR-ARLFMT: No PAYMENT NUM on PAYMENT record type.
Your lockbox interface program has completed successfully, however,there is No Data Found in the AR_PAYMENTS_INTERFACE table.
Solution
Responsibility: Receivables Manager
Navigation: Setup > Receipts > Lockboxes > Transmission Formats
For the Transmission Format name that you are using, make sure that there is a 'Transmission Record' defined and that there is a Transmission Field with a Field Type of 'Record Identifier' defined.
Make sure to include the check number in Transmission Format and Control file
and item number is:-
Item Number: A sequence number that your bank assigns to a specific payment. This number associates an invoice with a receipt.
I am passing item number, but still I am getting this error.
Can anybody please help.
Thanks in advance.
Regards
Gagan Garg -
Accounts receivable posting Error: (00 344) No batch input data for screen
Hello Folks,
Can anyone tell me what this error message means? Also for future reference, how do I identify why or what is causing this error message. Typically I use SE16 but this transaction code is not telling me what is causing the error.
Thanks!Thanks for your response Darren,
This isn't a BDC but rather an error appearing on the Posting Log as a result of importing the Lockbox file. I did run this in the foreground/ background and in Development and I didn't get this error. This error is happening in Production.
I am at a loss here to identify what the problem is because I forgotten a very useful transaction code I used to use to identify these errors which all I had to do was enter the error code and it would tell me what the problem was. In addition, this client I am working for doesn't have "seasoned" ABAP experts.
I have all kinds of errors appearing on these reports, several different kinds to be exact and I am trying to work through them.
Thanks -
Account receivable from sap bw perspective
hi,
this is viswa.my client is asked is account receivable analysis from SAP BW perspective.
Thanks & Regards,
viswa.hello,
The technical name : 0fi_ar_4
this is a technical name of a data source.
Check for the fields , try to pull the data from the source tables.
check if it works.
Reshma -
0FIA_DS11:Error when activating DataStore Object
Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMSHi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S -
Error while updating data from DataStore object
Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PMHi Vijay,
I got this error:
Runtime Errors MESSAGE_TYPE_X
Date and Time 04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
been logged for this process.
System Response
No log has been written. The process (and consequently the chain)
has been terminated.
Procedure
If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea? -
MIGO Error - Account 6500029 requires assignment with CO object
Hi Experts,
I am facing problem with new material code opened recently. Valuation class assigned is ZSTD.
At the time of GRN, It is giving an error msg :
Message no. KI235. Account 6500029 requires assignment with CO object.
Kindly note I am not making an account assignment P.O. It is a normal P.O.
Previously also with same valuation class, we have received no. of materials with out any error.
It should post the material to my inventory account 1220000 as it did with materials of the same valuation class earlier. I don't know from where it is picking GL 6500029.
Kindly help.
Regards,
Rajneesh GulatiHi ,
In OBYC kindly check the Key BSX for the GL account assingment to the valuation class .
As inventory accounts are Balance sheet accounts and do no require an assingnment to a cost element .
If your account is getting changed then check the same in OBYC - BRX .
Regards ,
Dewang T -
Error while activating DataStore Object
Hi Experts,
I am using standard DataStore Object(0FIGL_O02), but while scheduling the laod for it its giving me error:
"DataStore 0FIGL_O02 built incorrectly; cannot update request REQU_432B1OBKPHR2X8JKALGN0UZLE(617)"
My DataStore Object is active, but when i am trying to actiavte it again its going for dump but all the other ODS are working fine, does anyone faced the same problem?
Below is the dump:
Error in the ABAP Application Program
The current ABAP program "SAPLRSDG_MDOB" had to be terminated becau
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_TRFN================CP " in include
"CL_RSTRAN_TRFN================CU " in
line 159:
"Implementation missing for method "GET_INFO_VERS". "GET_INFO_VERS"
Message was edited by: SAP BIAre you using transformations/DTP to load the DSO??
I am not sure if this helps
Note 961556 - DataStore (activation): Columns are initialized without rule
Note 974833 - DataStore (activation): Columns initialized without rule
Hope it Helps
Chetan
@CP.. -
Error while activating data loaded into DataStore Object in BI 7.0
Hi Guys,
I am facing the following problem :
When I load data into a Datastore Object, all the records get loaded but the job fails during activation of the data.
Below is the job log :
Activation is running: Data target 0RPM_DS07, from 77 to 77
Overlapping check with archived data areas for InfoProvider 0RPM_DS07
Check not necessary, as no data has been archived for 0RPM_DS07
Data to be activated successfully checked against archiving objects
SQL-END: 14.06.2007 12:33:25 00:00:00
SQL Error: ORA-20000: Insufficient privileges
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
All data fields updated in mode "overwrite"
Resource error. No batch process available. Process terminated
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Request you to kindly help me resolve this issue.
I am runnning the infopackage manually. Should I run it by a process chain??
If I run by process chain, I get the following error in 1st step:
You do not have authorization for InfoSource 0RPM_ITEM_FIN_PLANNING.
Awaiting your replies,
Thanks,
punkuj...Hi,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri. -
Every time i want to sign in to my account i receive the error message that i need to contact itune support
Welcome to the Apple Community.
Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them. -
I receive the error "this apple id is valid but not an icloud account" when I try to open icloud on my pc. Help.
Music purchased from the iTunes Store is automatically available in iCloud. This is "iTunes in the Cloud" and does not require an iCloud account. The music is stored in the iTunes Store, not in a personal iCloud account.
If you don't have any Apple devices you will not be able to create an account. It wouldn't be any value to you anyway as it syncs data on you computer with your Apple devices. If you don't have any, there is nothing to sync. -
Error while activation the Datastore Object
Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
YashHi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish
Maybe you are looking for
-
Hi all, We are getting the following error when trying to parse an xml string resource - Character conversion error: "Illegal ASCII character, 0xc2" (line number may be too low)-. We have not been able to get around this. We have tried creating the I
-
Problems in Installing Oracle 10g,11g on same server
All, I install oracle 10.2.0 on RHEL 4.7 and running successfully, How i can Install more database 10.2.0 at same server, and what i have to changed in .bash_profile what change i have to do for installing Oracle 11g on same server. Thanks
-
Dbms_session.set_sql_trace(true);
Hi experts, Will you please tell me when a devloper writes dbms_session.set_sql_trace(true); In his pl/sql code.What is his exact intention behind it. Regards Rajat
-
Doubt with Workset and Area Page
Hi. I am configuring ESS for two country. For the Country A1 the company not want display the Area Page of Career and Job and for the country A2 they want display this Area of Page. I modified the FM HRXSS_GET_MENUDATA and this work fine and not disp
-
Not able to login with AEM 6.0 Configuration
HI All, After Migrating to OAK (CRX3) Repository i am unable to login and getting as below error Also I configured Jackrabbit Oak LdapIdentity Provider, Jackrabbit Oak Default Sync Handler and Jackrabbit Oak External Login Module So basically i am n