Accounts used by application pools or service identities are in the local machine Administrators group.
I am getting the Warning: "Accounts used by application pools or service identities are in the local machine Administrators
group."
Using highly-privileged accounts as application pool or as service identities poses a security risk to the farm, and could allow
malicious code to execute. The following services are currently running as accounts in the machine Administrators group: SPUserCodeV4(Windows Service)
OSearch14(Windows Service)
SPSearch4(Windows Service)
WebAnalyticsService(Windows Service)
I understand that the users running these Windows Services must not
be a local administrator of the server. The user I have assigned for the aforementioned Windows Services are in the following Groups in the SharePoint Server:
IIS_IUSRS
Performance Monitor Users
WSS_ADMIN_WPG
WSS_RESTRICTED_WPG_V4
WSS_WPG
Which group must I remove the user from?
Since I used the same account for all; I am getting the following error message:
The server farm account should not be used for other services.
the account used for the SharePoint timer service and the central administration site, is highly privileged and should not
be used for any other services on any machines in the server farm. The following services were found to use this account: SharePoint - 80 (Application Pool)
SPUserCodeV4(Windows Service)
OSearch14(Windows Service)
SPSearch4(Windows Service)
Web Analytics Data Processing Service(Windows Service)
Should I use another non administrator account for farm Administrator?
Similar Messages
-
my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
Is it a damaged keyboard ?
The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.No one here works for Apple, so we don't know what Apple might or might not do. If it's a genuine defect, they will of course repair it under warranty. It is not their responsibility if it effects your ability to work or not, so that's on you.
If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you. And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
Your only choice is to take it in for repair. -
My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?
Inherit a Backup
Inherit a Backup (2) -
Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine
I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick -
I just purchased 2 WD TB external hard drives. I have one formatted to be used with the time machine and it is working well. the other that i am using to store large files is excluded from the time machine. I can't click on it and add as per instructions. It won't allow me to. I need to back t his up as well. Ive backed up this one so I am able to reformat it but it doesn't recognize the drive unless it is formatted in FAT which is what WD advices it be formatted in. It should be in Mac extended journaling but I can't get it to mount in that. Help?
In addition, TM will not backup drives partitioned in FAT as the OP stated his 2nd EHD is formatted. My recommendation to the OP is to reformat the 2nd EHD to Mac OS Extended (Journaled) and then include it in his TM backups. Of course in order to do this the OP must first move the data on the FAT partitioned drive to his internal HD and then once the EHD is re-partitioned correctly he can move it back.
In addition as Pondini mentioned the 2nd EHD must be directly connected to the iMac rather than be a network drive, TM is NOT, repeat NOT a network backup solution with the single caveat of using a Time Capsule backup. -
How use a proxy consumer web service in ABAP Program with local interface
I generate a proxy class based on a WSDL file.
I want to use this class in an abap programm without a connection but using XML files in local.
I see with the class CL_PROXY_LOCAL_ADAPTER that it is possible to execute without connection but for use this, it's necessary to use the method REGISTER.
This method have two parameters : Class Name and Interface Name.
Class name is the name of my proxy class, but I don't know how to find the interface name.
I think that a local interface is needed to generate but I don't know how to generate in interface with entries in SPROXSIG table ?
Could you help me ?Check out the following links to see if it meets your needs.. Has examples to call a ABAP proxy (that consumes a webservice) from ABAP program...
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm (webservices ->webservices toolset -> examples)
http://help.sap.com/saphelp_dm40/helpdata/en/1a/b69d427cab0831e10000000a1550b0/frameset.htm -
I use an .ini file to allow the users to change the bootup preferneces for the program. In the past that file lived in the install directory and OpenFile could cheerfully find the file and apply the preferences. In CVI 2013, the program seems to need an implicit path to the file. Is there a way around this?
Solved!
Go to Solution.I'm not using CVI2013 yet, but in any case you can build up a full pathname for a file in the application folder using GetProjectDir and MakePathname commands at runtime.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Using WebService from Microsoft Reporting Service(MSRS)
Hi,
I want to invoke the web service from MSRS Report. Below is the details of my environment.
Web service is deployed on the local machine.
MS Report Server : SQL Server 2012 Reporting Service
Designer Tool Used : Visual Studio 2010
I have created a sample report in MSRS side, which should call getXXX, a web service method in XXXService(webService).
I created the datasource of Type "XML" in Visual Studio, and given connectionString
as "http://localhost:8080/axis2/services/XXXService".
I created the dataset in Visual Studio, using datasource in previous step and used the below Query
to pass the request to the WebService.
<Query>
<Method Name="getXXX"
Namespace="http://localhost:8080/axis2/services/XXXService">
</Method>
</Query>
or
<Query>
<SoapAction>http://localhost:8080/axis2/services/XXXService/getXXX</SoapAction>
</Query>
I am getting following exception in the Query Designer window.
===================================
An error occurred while executing the query.
Failed to execute web request for the specified URL.
Soap Fault:
The endpoint reference (EPR) for the Operation not found is http://localhost:8080/axis2/services/XXXService and the WSA Action = http://localhost:8080/axis2/services/XXXService/getXXX (Microsoft SQL Server Report Designer)
===================================
Failed to execute web request for the specified URL.
Soap Fault:
The endpoint reference (EPR) for the Operation not found is http://localhost:8080/axis2/services/XXXService and the WSA Action = http://localhost:8080/axis2/services/XXXService/getXXX (mscorlib)
Program Location:
Server stack trace:
at Microsoft.ReportingServices.DataExtensions.XmlDP.InMemoryCommand.ExecuteWebRequest(ICredentials credentials)
at Microsoft.ReportingServices.DataExtensions.XmlDP.InMemoryCommand.Execute()
at Microsoft.ReportingServices.DataExtensions.XmlDP.InMemoryCommand.<>c__DisplayClass1.<ExecuteReader>b__0()
at Microsoft.ReportingServices.DataExtensions.XmlDP.WebRequestHelper.ExecuteServerCallAsNtUser(ServerCall serverCall, WindowsIdentity ntUser)
at Microsoft.ReportingServices.DataExtensions.XmlDP.InMemoryCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.QueryDesigners.MultiThreadedQueryResultsHelper.AsyncExecuteReader(IDbCommand command, CommandBehavior behaviour)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at Microsoft.ReportingServices.QueryDesigners.MultiThreadedQueryResultsHelper.ExecuteReaderHandler.EndInvoke(IAsyncResult result)
at Microsoft.ReportingServices.QueryDesigners.MultiThreadedQueryResultsHelper.<>c__DisplayClass4.<ExecuteActiveQueryCallback>b__3()
at Microsoft.ReportingServices.QueryDesigners.QueryResultsGrid.EndExecuteReaderInUiThread(GetDataReaderHandler getDataReaderCallback)
===================================
The remote server returned an error: (500) Internal Server Error.
<?xml version='1.0' encoding='UTF-8'?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Body><soapenv:Fault xmlns:axis2ns22="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>axis2ns22:Client</faultcode><faultstring>The
endpoint reference (EPR) for the Operation not found is http://localhost:8080/axis2/services/XXXService and the WSA Action = http://localhost:8080/axis2/services/PricingService/getXXX</faultstring><detail /></soapenv:Fault></soapenv:Body></soapenv:Envelope>
Please help me in figuring out the problem in the configuration done or query passed in the Dataset of Visual Studio/Report Server.
Best Regards,
SridharHi Sridhar Singh,
According to your description, you created one web services and one web method, when you use it as data source, you got the error message.
To retrieve data from XML data source, the connection string must be a URL that points to the Web service, Web-based application, or XML document available through HTTP. XML documents must have the XML extension. The connection string syntax for a Web service
is http://servername /service.aspx.
In this case, please make sure that the web service is published successfully through url. Then we use the query like below:
<Query>
<Method Namespace=" http://localhost:8080/axis2/services/" Name="XXXService"></Method>
</Query>
In addition, the XML data processing extension does not detect the schema for us. Therefore, we must have some way of discovering which SOAP methods will retrieve the data that we want. The default SoapAction for the case is like below:
<Query>
<SoapAction>http://localhost:8080/axis2/services/XXXService</SoapAction>
</Query>
For more information about XML Connection Type, please refer to the following document:
https://msdn.microsoft.com/en-us/library/dd220468(v=sql.110).aspx
http://bhushan.extreme-advice.com/webservice-as-datasource-in-ssrs/
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support -
Changed SP application pool service account - 500 internal server error
Hi all,
Trying to resolve some farm installation issues in our test environment. Long story short is that on install a previous user used our SP_Farm account to install everything and pretty much use this account to run all web applications/services.
So I am in the process of trying to resolve one portion of it by allocating a new managed account for the web application pools. I have created a new account called SP_Pool on the DC. This is just a domain user with no specific rights applied (classic authentication).
I changed the account using CA "configure service accounts" for both our mysite and SharePoint site web apps.
SP applied the new SP_Pool to the appropriate workstation groups and DB rights. Tried to hit the site and got the rather generic HTTP 500 Internal Server error. Put SP_Pool into the local admin rights group to test and was able to hit the site so something
is definitely pointing to a rights/permission issue. I was under the impression the app pool accounts did not require any local SP server rights? I have seen mention of "Impersonate a client after authentication" but that's only for Claims based
auth
I've gone through every scenario which are mentioned below:
Tried to connect from a client machine and server. 500 error
All App pools are started and SP_Pool is running both web apps
IIS bindings are same as before
no changes to the web.config
No errors in the Application event viewer
Checked iis logs and has 500 errors throughout it. The 4th number in the sequence usually changes (i.e. 500 0 0 499, 500 0 0 468 etc)
Turned on Failed Request Tracing and no issue has come up
Tried to clear the configuration cache - same deal
Ran process mon - seen nothing out of the ordinary
So based off the above is there anywhere else I could look to try and resolve this issue? Or is there something so damn obvious I've missed here? Running out of ideas
Appreciate any feedback
ThanksHello,
Have you tried to turn your SharePoint server off and on again ( I know , it sounds like a basic helpdesk answer but in the case of changing user account for application pool, it already fixed the issue for me)
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer? -
Setting Users for my managed services and application pools
I setup my SharePoint 2013 test environment and I developed an intranet site. Now inside my test environment I set all the application pool & managed services to use Farm user account for simplicity. Now I want to setup my UAT environment and I want
to follow the best practice for managing users and service accounts.
I have read the “Core Solutions Of MS SharePoint 2013” book, and it have listed the following table:-
First question. What is the difference when saying that the user “Must be a member of the Farm Administrators group” Or must be “Domain user account”?
Second question , when I first install SharePoint 2013 a lot of applications pools and managed services such as excel services , access services, Performance Point Service Application, business
data connectivity and Machine Translation Service will be automatically created , so which account they will be using and should I define separate accounts for each managed service ?
Third question. What is the recommendation for SharePoint 2013 regarding service accounts?, to use separate account for each manage service, for example one user for excel services , second user
for access services ,etc?
Fourth question. For example the documentation mentioned that the Required roles for the excel services is “Domain user account.”, but what permissions this domain user need to have ?
thanks for any help, and sorry so adding multiple questions inside the same post.Q #1: This means the user must be part of the Farm Admins group. Every user is a Domain User.
Q #2: Generally those should be using a single Domain User account in a single Application Pool to minimize memory usage and reduce unnecessary complexity.
Q #3: The less Application Pools the better. E.g. One account/App Pool for all Web Applications, one account/App Pool for all Service Applications, and then Central Administration is obviously separate.
Q #4: You don't need to specifically give this type of user any sort of rights
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Environment:
OS: Windows 7 32/64 bit, Windows 2008 Server 64
bit/ Windows 2012 Server 64 bit
Priority:
- Critical
Requirement: - Since
the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
command
net use z: \\servername\sharedfolder /persistent:yes.
Already Attempt:
We tried to launch the CMD.exe using the DOS Task Scheduler AT command. Here’s a sample command:
AT 10:36 /interactive cmd.exe
But I received a warning that “due
to security enhancements, this task will run at the time excepted but not interactively.”
It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
Interactive services no longer work on Windows 7, Windows Server 2008 and above.
2. We
tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
<Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
start RunCMDAsLSA
In this case the service fails to start and results it the following error message:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
3. One
suggestion, we found to launch CMD.exe via a Scheduled Task, but
it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
4. I read an article, which
demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
psexec -i -s cmd.exe
PSTools worked fine, but It seems that in scope of Sysinternals Software License
Terms. You may not "use the software for commercial software hosting services."
Application will deploy on client, which will be like commercial,
so we are not able to use PSTools.
Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
I will be really thankful.Hi Sir,
Nothing worked from above for us. You can see our remarks on posted query.
That’s why, we posted on forum.
And there will not be any vulnerability, because, if we will use "net
use ..."
in network domain; definitely,
we will provide username and password of mapped drive system.
And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
We need a way; by which we can complete the requirement. Kindly assist.
Regards,
S. P. Singh -
Service Accounts used in Different OSB Projects
Hi,
In the project I'm working on, we need to have a service account used by different OSB projects. We are using fn-bea:lookupBasicCredentials to lookup the service account. The problem is, the same service account may be under different paths in the different environments we have. Is there a way to use something like a relative path to refer to this service account so we don't have to worry about the environment our code is deployed?
Thanks in advancePlease refer -
How to get ip number in WSDL instead of host name?
Why do you want to have IP instead of host name?
Regards,
Anuj -
Delete accounts used by company
Hi,
I need to delete three accounts used by Hunton AS.
Hunton [Specifics redacted for privacy]
Hunton [Specifics redacted for privacy]
Hunton [Specifics redacted for privacy]
The problem we to not have username and password anymore. What to do??Since I used the same account for all; I am getting the following error message:
The server farm account should not be used for other services.
the account used for the SharePoint timer service and the central administration site, is highly privileged and should not
be used for any other services on any machines in the server farm. The following services were found to use this account: SharePoint - 80 (Application Pool)
SPUserCodeV4(Windows Service)
OSearch14(Windows Service)
SPSearch4(Windows Service)
Web Analytics Data Processing Service(Windows Service)
Should I use another non administrator account for farm Administrator? -
CR XI R2 "Database Login Failed" Recycled application pool and now it works
Hello,
I have a web application using CR XI R2 that has several reports which are pushed a dataset. These reports have been runing fine until today when I received an error stating "Database login failed." "Object reference not set to an instance of an object" in the report viewer control.
I recycled the application pool and the reports started working again.
My questions are:
What could be the cause of this and how can it be avoided?
Why does recycling the application pool correct the problem?
Regards.Hi Tom,
Recycling keeps problematic applications running smoothly, especially when it is not feasible to modify the application code. Recycling helps ensure that problematic applications do not cause other applications to fail, and that system resources can be recovered from unhealthy applications.
Recycling an application pool causes the WWW service to shut down all running worker processes that are serving the application pool, and then start new worker processes. Whether the WWW service starts the new worker processes before it stops the existing one depends on the DisallowOverlappingRotation property in the metabase. Recycling an application pool does not alter any state in HTTP.sys or change any configuration in the metabase.
Note:
When an application pool is serviced by more than one worker process, the recycle operation is staggered in some scenarios. Only when a worker process is recycled on demand or when all of the worker processes hit their memory limits at the same time would they be restarted simultaneously.
For more info regarding this have a look to this [article|http://blogs.msdn.com/david.wang/archive/2006/01/26/Thoughts-on-Application-Pool-Recycling-and-Application-Availability.aspx]
Regards,
Shweta -
CSML application - new field service error first page
I have a problem with new field service laptop CSML application. I click on link after login and receive a error in page http://localhost/CSML/html/csmlFirstPage.uix
500
java.lang.NoClassDefFoundError: oracle/jbo/ComponentObject
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at oracle.cabo.share.xml.beans.IntrospectionBeanDef.createBean(Unknown Source)
at oracle.cabo.share.xml.beans.BeanParser.startElement(Unknown Source)
at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1280)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:328)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:295)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
at oracle.cabo.share.xml.XMLUtils.parseInclude(Unknown Source)
at oracle.cabo.ui.xml.parse.TemplateImportParser.getNodeValue(Unknown Source)
at oracle.cabo.share.xml.LeafNodeParser.startElement(Unknown Source)
at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1280)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:328)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:295)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
at oracle.cabo.share.xml.XMLUtils.parseSource(Unknown Source)
at oracle.cabo.ui.composite.TemplateLibrary.getTemplates(Unknown Source)
at oracle.cabo.ui.composite.TemplateLibrary.getNamespaceURIs(Unknown Source)
at oracle.cabo.ui.composite.TemplateUIExtension.registerSelf(Unknown Source)
at oracle.cabo.data.jbo.ui.JboUIExtension.registerSelf(Unknown Source)
at oracle.cabo.servlet.xml.UIXPageBroker.getDefaultParserManager(Unknown Source)
at oracle.lite.web.cabo.WTGUIXPageBroker.getPageDescriptionCache(Unknown Source)
at oracle.cabo.servlet.xml.UIXPageBroker.getPageDescription(Unknown Source)
at oracle.cabo.servlet.AbstractPageBroker.getEventHandler(Unknown Source)
at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at oracle.lite.web.JupServlet.service(Unknown Source)
at oracle.lite.web.AppServletHandler.handle(Unknown Source)
at oracle.lite.web.JupApplication.handle(Unknown Source)
at oracle.lite.web.JupApplication.service(Unknown Source)
at oracle.lite.web.JupHandler.handle(Unknown Source)
at oracle.lite.web.HTTPServer.process(Unknown Source)
at oracle.lite.web.HTTPServer.handleRequest(Unknown Source)
at oracle.lite.web.JupServer.handle(Unknown Source)
at oracle.lite.web.SocketListener.process(Unknown Source)
at oracle.lite.web.ClientListener.process(Unknown Source)
at oracle.lite.web.SocketListener$ReqHandler.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: oracle.jbo.ComponentObject
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
... 50 more
Somebody can tell me what I had done wrong?
Thanks.The following docs should get you started populating and using this application:
Mobile Field Service 12.1.1 Release, Install and Implementation Notes
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=846572.1
500 Internal Server Error After Adding ALTERNATE_DIR Line in webtogo.ora
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=844410.1
How To Publish Mobile Field Service Applications For 12.1.1.
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=846429.1
Oracle Mobile Field Service Implementation Guide Version 12.1.1
http://download.oracle.com/docs/cd/B53825_02/current/acrobat/121csmig.pdf
Regards,
-Michael
Maybe you are looking for
-
Ipod Classic No Longer Synchs after Itunes Moved to New Computer
I successfully restored my itunes from old computer to external hard drive to new computer. Then I tried to sync iPod Classic 80 GB, but was told I couldn't synch it to new computer. So I restored Ipod to factory settings and tried synching again.
-
I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?
-
Hello, I just downloaded the free trial version of Contribute CS4...installation when alright but when I try to open Contribute it takes quite a long time and then when it finally opens I get an error message that says Suitcase is having trouble open
-
MySQL in JDeveloper - Invalid Oracle URL specified
I am using JDev 10.1.3 with MySQL 4.1.13 and Connector/J 3.1.10. I tried to follow the instructions at: http://www.oracle.com/technology/products/jdev/tips/duff/mysql_and_oc4j3.html but JDev doesn't seem to be using the data-sources.xml file in jdev/
-
No sound after Win 7 install w/Pavillion a1430n
Hey, I've just did a full install of Windows 7 on my HP Pavillion A1430N and I've got no sound. Got the red x next to the speaker in the icon tray. I've seen while searching that loosing the sound is common with this upgrade/install, but I haven't se