Acct Assign of material without material master

Dear all:
Here's the scenario
In IMG setting, I assigned my own accout modification (CIP) to my own account assignment category (0)
and I made configuration in auto posting OBYC to assign GBB/CIP to G/L account for no specific valuation class.
And when I create a PO to purchase a material without mateirla master with accout assignment category (0) and material group.
The system only auto assign G/L account to material group which no valuation class was assigned in OME9 (Entry aids without material master in MM IMG setting)
But I read the PA material it says "If you do not want to differentiate according to valuation classes you do not have to maintain a valuation class for a transaction."
Yes, I don't want to differentiate according to valuation classes, but the system result is not what I expected.
Any response might be helpful. Thanks in advance.

Hi Utsav
Hope you are aware of the field G/L account in Account assignment tab in PO.
G/L account will be automatically populated here based on the Material grp you use for the PO without Material master.
System will check the valuation class assigned to material grp ( Tcode OMQW) then the system will look for the G/l account in OBYC
Transaction event key GBB/Genral modifier/Valuationcls/Gl acc..
If there is an entry with Genral modifier ( from account assignment category) and valuation class ( from material grp) then the system will pick this G/L and
populate it in PO account assignment tab.
This G/L account will be used for further postings
Hope it is clear
Thanks/karthik

Similar Messages

Material without material master record

Dear All,
i want material without material master record by using account assignment category k. how can i do that. item category should be standard. i will use another material group with a different valuation class.
regards,
qsm sap

Hi,
In ME21N, In case of w/o material master purchases (Text Purchases), do not enter material code in PO, Enter following details;
Account Assignment Category (For e.g. K - Cost Center),
Item Category - Blank
Short Text,
Quantity,
UoM,
Material Group,
Plant,
Gross Price, etc...
Then Save it.
2. MIGO - GR w.r.t. PO
It will Debit Expense A/c and Credit GR/IR Clearing A/c.
3. MIRO - LIV w.r.t. PO
It will Credit Vendor A/c and Debit GR/IR Clearing A/c.
And if you want account determination on the basis of material group then do following config.
SPRO > MM > Purchasing > Material master > Entry Aids for Items without an material master > here assign different valuation classes to different material groups as per your Accounting requirement.
And then do necessary account determination in OBYC for the Valuation classes, T/E Key "GBB" and Val. modifier "VBR"
Also refer the following link;
[Default GL account in account assigned Purchase Documents|http://www.sap123.com/showthread.php?t=10]

Procurement of Material without Material Master - CIN

Hi
Is it possible to procure a material without material number in CIN. If possible how can we do that. How can we show registers to Excise authorities. How we can track history
Please help me
Regards
Rahul

Hello rahul,
As per my knowldge, it is possible. You can try the following steps and confirm.
In J1ID- material chapter id combination, you can maintain a blank field for the material number and assign a chapter id along with other datat (whether raw material,consumable,finished goods and all) and save.
maintain the trax rates for that chapter id for tax indicators in J1ID and try the transactions,
System will simulate the Excise and the entries in registers will be having the material short text you are maintainig in the PO/PR.
Regards
Gregory Mathews

GTS 7.2 - Error with account assigned purchase order without material

All,
I am creating an account assigned purchase order without any material master in the feeder system (ECC 5.0) and it a standard SAP functionality.
I am getting the following GTS related pop up message and documents are posted to technically incomplete documents in GTS 7.2.
"Legal Control: Custs Prod. Mast. Required
Material "
Any ideas on how get rid of this error message
Edited by: James Puzon on Oct 3, 2008 9:32 PM

James,
Even though material numbers are not mandatory on POs in the feeder system (ie in ECC) they ARE mandatory in SAP-GTS.
This means that every line item (PO, SO, delivery) that is sent to GTS for compliance screening or Customs processing MUST have a material number in the feeder system. You have a couple of options to resolve this:
1. Always use a material number on all transactions that you enter in your feeder system if they are exports or imports (ie relevant for GTS). You can create service materials or "dummy" materials in ECC for items such as user manuals, warranties or installation services that are part of a particular shipment.
2. You can add logic in the interface for GTS to always transfer a particular material number to GTS if the material number is blank on the line item of the feeder system document. Ideally you would want to link this custom logic to a custom maintenance table in ECC so that you can easily change the material number that is sent to GTS without having to change the code.
3. Override the error message by changing the message type to a warning or informational message (not recommended because this would require a small code modification because I don't think the message type is configurable for this error). Even if you did make this code change you would likely run into more issues in GTS because license determination and other GTS services need a material number to function properly.
Hope this helps.
Sascha

PR, PO, GR for a consumable material without material master record

Hi,
I have created a complete cylcle till Invoice Verification for a material without a material master record.
But i have one query i.e. in the cylce i created i had to create a GR before entering MIRO. Is there any way by which i need not create a GR for a consumable material i.e. to be posted directly to a GL without any inventory management.
In my case, the GR checkbox in the PO was automatically ticked.
Can anyone help on this please.
Regards,
Laxmi

Customizing Error Message in ME23N
When displaying of modifying Purchase Orders with a document type of Framework Order, a user selects the LIMITS tab, they get the error message Customizing incorrectly maintained, message number SE729.
The problem is caused by version upgrades of the SAP software.
Number of entries in table T162V is different to the number of columns in table control for screen SAPLMLSP (400). You can use screen painter SE51 to display the screen. View the Element list for TC_VIEW.
The list of fields can also be viewed within the program. Transaction code ML81N (service entry sheet), program SAPLMLSR. Click on the Configuration button (top right hand corner) select Administrator. This shows the number of fields as 67.
Using SE16N to view table T162V shows 69 fields. This table contains six layouts (variants), they must all be the same. Before the change the total count was 414 (69 x 6).
The ME23N transaction only checks that the number of entries is correct. You will notice that the fields are not in the same sequence, but that should not matter if you donot use the service transaction ML81N and it is not a selectable tab on ME23N.
Transaction SM31 was used to delete the extra fields. As this is a SAP table, you may need extra authorisations to make the change.
Note: the number of fields shown above will be different in each site. This is because of different SAP versions and in what software is loaded.

Creating material without material master record

Hai,
Can u pls help to solve this scenario.
client is having MTO type Business Process.
They have to create a material which doesnt have material master record in quotation.(So we Can have text material).
But for that material we neeed to do costing , so i have activated EK02 in QT doct type.
So costiong is possible for normal material.
But for text material error comes as like.
*_Specify at least 1 unit__Message no. BM018*_
_Diagnosis_
No unit was included. Conversion or determination of conversion factors is therefore not possible.

Here there are 2 Options: can be follow,-
- 1:
Client has to create one dummy material & do the costing for this material, Once Client receives the Purchase Order from the Customer, then create Order with ref to the same quotation & Change the Dummy Material to the New Material-FG product.
would be the better option,
02:
we too have same scenario, But we have told the Client, before Preparing Quotation, create FG material & do the Costing. In our case, Client is preparing Costing sheet based on Order i.e Product Cost by Order.
Becoz without FG , user cant have BoM for the same.
It is regular field requirement.

Inspection lot for Non stock relavant without material master

Hi,
Could you suggest how to carry out the isncpection processing of an Non-Stock material without Material Master?
Our porcess is:
1. Create a Purchse Order
2.GR of Purchse Order. & directly consumtion to cost center.
Now my doubt is that how can we maintain the QM paarmeters for Non stock material without Material Master Record.?
Thanks,
Amar

Amar,
Your requirement is not logical, If you say it is non-stock, once GR is done it would directly get consumed. QI to my knowledge not possible.
Regards,
Prasobh

Procurement without Materials Master Records

Hi All,
Kindly guide me with the following issue.
I have created a PO for Consumable Material (Without Materials Master Record).Have given the Cost Center as Acc.Assignment too. However while doing Goods receipt It gives an error stating
"Quantity could not be converted from "2 to "
Here "2 is is the Unit created by me i.e. Square Inche.
I checked all the settings related to "2 but cud not resolved the issue.
It does not mention anything related to "From & To" Relationship of OUNs.
Pls guide.
Thnx & Rgrds,
Sandeep

Hi Santosh it Seems that the Unit of mesurement which you defined as 2 is not properly maintained as it is recomended not to define your own units of measurements as they are under some patern like ISO standards and they are having some conversion factors also. So check it again .
Biren AGnihotri

Split GR/IR accounts by Valuation Class (PO without material master)

Hi Experts,
I've an issue here, when I'm tried to do GR posting (PO without material master), system doesnt able to post GRIR account by valuation class.
Scenario: PO issue without masterial number, enter description and with material group.
In the configuration, I've configure "Entry aids for item without material master", assign material group "Asset" and material group "Services" into 2 different clearing account. However, when GR posting, system prompt error message and not able to do posting.
Kindly advice.

Yes , you can post to different GR/IR accounts based on the valuation class . In OBYC for WRX , you can choose your rules . In the Rules , select valuation class . Then the system will allow you to choose different GR/IR accounts for each valuation class .
During the GR , the system will pick the corresponding GR/IR account based on the material grp valuation class .
Regards,
Hari.

Re: Creation of sales order without material master

Hi All,
Is it possible to create sales Order, without material master. In case if so please provide the details.

Hi,
It is possible to save order without any material.
But if you want to restrict it, go to VOV8 and select your Sales Document Type and see if any incompletion procedure is assigned.
Now go to SPRO - SD - BASIC FUNCTIONS - LOG OF INCOMPLETION ITEMS - SALES ORDER ITEM -
and for your incompletion procedure maintain VBAP under table and MATNR under field name. Also you can tick on warning message, if user now tries to save the order without any material.
So now you can restrict saving order without having any material.
I am sure this will help you, if it does, please dont forget to reward points for contribution.
Regards
Ravi

Creation of Purchase Order Without material master

Dear Experts,
Can we create PO with out material master.
1. If yes, what is the functional objective behind creating PO with out material master
2. Where do you do the setting for the same
I am trouble shooting on issue where once the user creates PO without Material master and with the account assignment caragory K and one GL account the FI document gets posted in MIGO and MIRO. But when I use more than 1 GL account with the same above setting the FI document does not get posted.
Any Input.
Regards
Paul

Hi Tao,
Thanks for your prompt response.
The issue here is little different which i missed to mention above.
with the account assignment catagory K when I put two different Cost center system does not go FI posting.
paul

Unsolved Problem-Order without Material Master

Hi all
My problem is still unsolved. I want to create Sales Order with out Material Master. In Materials Management, we create Purchase orders to vendors with out a Material Master by just typing description of a material and then assigning Material Group and Cost Centre to that description.
If it is possible to issue Purchase Orders with out material master, then it is not possible to create sales Order also without material master?
I got an answer here yesterday to type description in Material description field in SO and use item category TATX. The problem with this is, it allows delivery, but does not allow pricing (pricing setting immediately goes to display mode in item category screen). If I do any other alterations with this item category, then it asks for material number while creating sales order.
Please help

Hi,
I think the for text material pricing is not applicable.Thats why it's not taking.Text material is only for displaying text only.
Regards,
Hari.

Purchase order without material master

I wanna create purchase order for a material that does not have a material master record.
is it possible to create it without entering account assignment? because i wanna buy it for an storage location and an sloc does not have any G/L account

Hi
You need to show purchase cost in some GL account. System recognises GL account through material master or material group with account assignment combination. Without these two you cannot identify to which account postings should happen. Assign a valuation class to a material group in OMWQ and assign a GL account to valuation class in GBB - VBR for automatic picking of GL account in purchase order. However you can overwrite this GL account as per the requirement.
Thanks

No delivery expediter for PO item without material master

Hello gurus,
when I create a PO with an item without material master (just user-defined text), my system does not create a delivery expediter in ME91F, although the delivery is overdue. When I use a material master in the item, the expediter is created just fine.
Does anyone have an idea what could be wrong here?
Thanks
Alicia

Hi,
Check in ME22N, under "Delivery" Tab whether following is maintained
Reminder 1
Reminder 2
Reminder 3
If not then maintain ad if you want it to come automatically in PO then check in SPRO > MM > Purchasing > Material Master > Entry Aids for Items Without a Material Master > Here assign the Purchasing Value Key to the material group
It will start picking it for this material group for Text PO also.

CIF: ECC Material without plant assignment

Hi Experts,
i have a question regarding to CIF'ing of ECC materials to APO.
Is it possible to CIF ECC materials to APO without an assignment of a plant to this material? If yes, how is this possible?
We have several materials without such an assignment maintained in ECC (material group packiging material) and they are needed in APO.
Kind regards
Jens

Jens,
When I say 'planning system', I am not talking about predictabiity. I am talking about the generic term concerning the management of supply and demand (which is mostly what APO does).
In ECC, a packaging material is not normally treated as a resource. It is a material. It is unclear to me how you are using packaging materials to represent resources.
A Product master can exist in APO without locations assigned. Therefore, I suspect that using enhancements, it might be possible to CIF across only MARA data and not MARC data, but I have never tried it. Perhaps one of the other Gurus can offer additional insights.
Best Regards,
DB49

Acct Assign of material without material master

Similar Messages

Maybe you are looking for