Acct for security and debugging

I'd like to turn on accounting for use in security, debugging changes (when sudo isn't used), activity recording and the "what processes were running when..." questions.
I'm concerned about the affects on the system. Is there a perceptible performance hit or some stability issues?
I was responsible for the accounting data at another site so I'm well aware of the files and data maintenance involved.

Workflow is included in the Business Process Management (BPM) forum. I am not sure there is a forum for Security.
Cheers,
Ramki Maley.

Similar Messages

  • When i got my i phone they had me answer questions for security and now i went to itunes to buy something and they asked me totally different questions...so now i cant buy things from itunes..can i reset or change the questions

    when i got my i phone they had me answer questions for security and now i went to itunes to buy something and they asked me totally different questions...so now i cant buy things from itunes..can i reset or change the questions

    Welcome to the Apple community.
    You might try to see if you can change your security questions. Start here, change your country if necessary and go tomanage your account > Password and Security.
    I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
    If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

  • After AVG PC Tune up, software update message for security and stability update is available FireFox 3.6.18. Should I Update?

    My Dell laptop (Operating on Windows XP) was hit with multiple viruses - I could not open Mozilla Firefox or any other applications for that matter. After much time and many attempts, I was finally able to install and run an AVG Scan and then an AVG PC Tune up. 4,559 problems found and repaired. After the repairs, I received the following message:
    "Software Update - A security and stability update for Firefox is available: Firefox 3.6.18 - It is strongly recommended that you apply this update for Firefox as soon as possible. - an underlined link reading, "View more information about this update" and then 2 choices - "Ask Later" or "Update Firefox." Since part of the problem was with Firefox and some error messages pointed to that, I'm hesitant to click on any of the three options above. Can you help me to get past this error message, please. I am sending this from my home computer. Thank you. Diane

    Sometimes the updater gets in a funny state - Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Close Firefox and run the installer

  • Any ideas for security and parental control software yet???

    Just received two of the touchpads from the fire sale and gave them to my kids, both under 10.  I am very interested in limiting the sites that can be accessed through the browser, as well as a few other things.  Has anyone found a practical means of doing this?  I'd hate to give up on this and switch it over to Android, especially since there is only Gingerbread available.  But, I just don't know what else I can do about these.  Any ideas? 
    Thanks!
    Post relates to: HP TouchPad (WiFi)

    Please take this post with a grain of salt. I don't claim to be a security and parental control software expert, but I have researched these solutions and have some personal experience with them. That being said, here's some ideas to get you started.
    As speedtouch mentioned, OpenDNS is a fantastic solution for website filtering. They have a great set of filters that can be customized and are one of the easiest systems to set up. Simply install an updater app on one of your desktop computers (or directly on your router if it's supported), configure your router to use their DNS servers, and you're good to go. I personally use this system mysefl and it works really well. The only downside in my experience is that there is not a temporary override system (at least, not in the free version that I use). An example of when this might be handy: my wife goes clothes shopping and looking at new bras. Every once in a while, a perfectly legitimate site might get blocked (in this case, probably something I don't want my kid looking at but perfectly fine for my wife). The option to "temporarily override the block" or "temporarily allow" the site would be nice, but it doesn't exist.
    Another FANTASTIC solution that I've used in the past is the Astaro Security Gateway. They have a free home version of their "Software Appliance" that goes above and beyond OpenDNS. I haven't used it in a while, but when I did it was able to not only filter web sites but also monitor Instant Messaging and other online activites. It's a bit more involved as you need your own hardware (I used an old computer with 2 network cards and stuck it in between my router and my broadband modem), but the results are pretty powerful.
    The downside to all these solutions, however, is that they will only work when the TouchPad is on your network. If they connect to a neighbors network of if the go to a friends house, all of these systems will be moot because they are completely bypassed. The only way to monitor that content from ANY network would be to install an application on the device itself and to my knowledge, none exist.

  • We forgot the questions for security and I am not sure if it is mine or my daughters

    I can not buy anything because we forgot the iTunes security questions

    See Kappy's great User Tips.
    See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
    Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
     Cheers, Tom

  • Integrated ITS in a Separate App Server (DI) for Security and LoadBalancing

    Hi Experts,
    I have a specific requirement for ITS Configuration.
    1. Production Server ( CI + DB ) -> Existing
    [ ERP6.0 ]
    OS : Solaris 10
    DB : oracle 10.2.0.2
    H/W: PRIMEPOWER650
    Unicode Enabled
    2. Application Server ( DI ) --> to be made ( and to be used exclusively for Web users)
    OS : Windows2003 sv
    H/W: RX200 S3
    x64
    MEM: 8GB
    No. 1 is existing Production Server Environment.
    The Customer Requirement.
    The Customer wants to use the ITS . But he doesn't want the existing Production Server to be disturbed for the same for 2 reasons. [ Security and Load Balancing ]
    We are planning to create a Separate Application Server (DI) to work as ITS.
    As the Kernel is 700. The ITS is integrated into the Production Server by Default.
    We have written to SAP and have asked whether the Production Server ITS can be disabled and the Separate DI's ITS be enabled so that the NEW ( No.2 ) Application Server will be used for ITS activities.
    SAP has replied saying the Integrated ITS cannot be disabled at the Production Server. Instead as an alternative we can create a Logon Group (using transaction SMLG) and divert all the Web users to the Separated DI (No.2). We have decided to go according to SAP.
    Now I have the following questions :
    1. The Operating Systems of the Production Server (No.1) and the Separate AP (No. 2)
    are different. ( Are there any complexities involved or must do points to be taken care. )
    2. Brief / MUST DO tasks at the Production Server Environment and Must do tasks at the DI Environment.
    I hope someone has already done some few installations on the above combination, if so, request to please share me your ideas.
    Thanks in anticipation
    Best Regards,
    Paguras
    PS :
    my earlier discussion on the same topic on this community.
    ITS Specific Requirement

    Hi Markus,
    Thanks for the Reply.
    We have the following 2 plans :
    Plan-01.
    As you have advised, we will try to disable ITS of CI and enable ITS of DI.
    Plan-02.
    If Plan-01 could be worked out successfully, well implement as per SAP suggests. Creating a Logon Group and divert all the web users to the DI alone.
    To deactivate ITS on CI, you have mentioned to make sure, that the  system does not listen on the HTTP port (transaction SMICM) on the Servers
    BTW, I have seen a parameter called <b>ITSP/ENABLE</b>. if we deactivate this parameter at CI & DB and then activate the same parameter at DI.
    My questions to you :
    1. Shall we go for Plan-01 ignoring what SAP OSS has said. ?
    2. Disable ITSP/Enable Parameter  -> CI & DB
        Enable ITSP/Enable Parameter   -> DI          has to be implemented .
    Thanks & best Regards,
    Paguras
    PS: Sorry for always pounding you with so many questions on the same topic.
    SAP Help on ITSP / enable parameter
    itsp/enable
    You use this parameter to deactivate (0) or activate (1) the integrated ITS. Even if the integrated ITS is activated, it only accesses system resources when it is actually used. Nevertheless, it can make sense to deactivate it to prevent users from accessing the SAP system with SAP GUI for HTML via special application servers (such as batch or update instances). Since the conversion of SAP screens into HTML pages uses additional CPU time, it makes sense to reserve a number of dedicated application servers to be used with SAP GUI for HTML and to use a special logon group to balance the load between them.

  • I have upgraded my Adobe acct for $89 and am trying to send a signed document.  How do I send this pdf?

    I have upgraded my Adobe account for $89 and am trying to send a signed pdf.  How can I do this? I am logged in.

    Hi paulo54376809,
    Go to Adobe Send webpage.
    Sign-in using your Adobe ID.
    Click on the big blue 'Select files to send' button.
    Choose the files you want to send
    Enter recipient e-mail address and customize your message (If you want to.)
    Review your options and click 'send'
    Please revert back if you face any challenges.
    Regards,
    Rahul

  • I forgot my answer for security and i have typed wrong recovery mail . i dont want to call apple

    hello , i forgot my answers at security and i have typed wrong recovery mail adress . i dont want to call apple . what can i do now ?

    You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if desired, filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    If the people at the form tell you to call, accept that you need to.
    (109832)

  • HT1725 When I type in my apple ID to download a song it says it needs additional info for security, and then it asks me two questions that I don't know the answers to. What do I do?

    When I type in my apple ID password to download a song it says it needs additional information so I clicked ok. And then it asked me two security questions that I don't remember the answers to. What do I do? I'm so frustrated

    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions

  • Best Practice/Standard for Securing and Attaching Files in a Web Service

    Thanks in advance.
    Being new to Web Services as well as most of my team. I would like to know what is the best practice for transporting files via a Web Service. I know of several methods and one that seems to be the standard, but you can't really tell in this ever changing world of Web Services. Below are the options that I have found.
    1. MIME encoded the file and embed in the payload of the SOAP message
    2. SwA (SOAP with Attachments) which applies MIME attachments to SOAP. I think this is similiar to the way emails are handled.
    3. DIME (Direct Internet Message Encapsulation) similiar to MIME encoding but is more efficient
    4. MTOM (Message Transmission Optimization Mechanism) I really not understand this method, but it seems that this is the NEW standard. I just don't understand why.
    5. Utilize HTTPS and download the file from an accessible file server w/ a login id and password.
    Is there someone out there that understands this problem and can assist me in understanding the pros and cons of these methods? Or maybe there is a method that I'm overlooking altogether.
    Thanks

    JWSDP supports securing of attachments [1]and will soon support securing MTOM attachments too. [1]http://java.sun.com/webservices/docs/2.0/xws-security/ReleaseNotes.html

  • Does anybody no .... I can't reset my questions for security and I have forgotten the answers I no longer use the email that it sends it to and I don't no how to change it??

    Does anybody no how to change the email address that it sends to reset your passwords because I can't remember my answers for questions

    http://support.apple.com/kb/HT5312
    If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com.  Clicking the link will send the reset to your rescue email address (NOTE:  This is not the same address as your Apple ID email)
    If there is no link on the page, then you didn't establish a rescue email address.  Contact AppleCare at 800.694.7466, and ask for account security.  You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
    HTH

  • Masking HTTP inbound URL for security and control - Seeking Ideas

    I am working to transition an application to XI that is based on HTTP posts from vendors to provide data. In order to use the XI Plain HTTP adapter for inbound requests, I need to provide the vendor a very long url and query string that identifies the target system as XI (since the query string structure) and makes it difficult to make changes to the configuration without notification of the vendor (because of the values required in the query string).
    Has anyone found a way to mask the query string using a BPM page or another method to provide a simple url to integration partners that will translate into the fully qualified url within my environment?

    We solved this by using reverse-proxy with URL rewriting on network (NETAPP) appliance.

  • I forgot my answer for security and i can't change the question So, i want to know how can i do?

    I want to buy some app but i can't because i have to answer my security question but i forgot the answer and i can't change or reset the question i really want to know how can i change or reset the question??

    Read this about how to change the security questions: http://support.apple.com/kb/HT5312
    If you can't use these procedures contact Apple. See http://support.apple.com/kb/HT5699

  • Security  and roles while upgrading to bi7

    hi
    Guys  i ha ve question about upgrade
    what will happens to security and roles while upgrading from bi3.5 to 7 ?
    is this can be migrated into bi7 from bw 3,5 , if so how ?
    or do we need to create separate  again in Bi7 ?
    u r answer will be much apreaciated

    Hi,
    this can be upgraded but it is not a must. SAP recomend to use the new concept provided by NW 7.0...
    You can switch on/off obsolete Authorization concept with RSCUSTV23. For security and clarity reasons make a u201Ecleanu201C new setup u201Efrom the scratchu201C (much easier, less complex than in 3.x)...
    Check this upgrade guide it will give you all informations:
    [SAP NetWeaver 7.0 BI Upgrade Specifics|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742]
    New BI Authorizations set in SPRO (maintenance in RSECADMIN)
    - During technical upgrade, and if you used an authorization concept in BW3.x
    switch back to u201Cobsolete Concept with RSR Authorization Objects)u201D
    - Important: After technical upgrade switch back to the new Concept and see
    note 820183 and 923176 New BI Authorizations set in SPRO (maintenance in RSECADMIN)
    - During technical upgrade, and if you used an authorization concept in BW3.x
    switch back to u201Cobsolete Concept with RSR Authorization Objects)u201D
    - Important: After technical upgrade switch back to the new Concept and see
    note 820183 and 923176
    Other links/notes which could be helpful:
    Note 923176 - Support situation authorization management BI70/NW7.0
    New Analysis Authorizations for BI Reporting:
    http://help.sap.com/saphelp_nw04s/helpdata/en/80/d71042f664e22ce10000000a1550b0/
    content.htm
    Regards
    Andreas

  • Best possible Tracing and Debugging mechanism

    Hi,
    In a real-time program which performance is the most critical factor, what is the best idea for tracing and debugging the program execution.
    Thanks,
    S.

    You will have to use daemon threads as the compiler in general is not in control of how the operating system will behave with threads and synchronising the objects would help when holding this virtual log that you are speaking of. This can be a bit tricky.
    maybe this info will help:
    http://developers.sun.com/dev/evangcentral/totallytech/jmf2.html
    http://www.jcp.org/en/jsr/detail?id=1
    -System load is a variable I presumed you may have some way of measuring the tolerance and threshold levels in the system since it is real time.
    -With concern to the logging API in the sdk if you use a web server to deploy this application it can automatically log the errors in its log. I know this works for Apache Tomcat. Not sure on real time performance but u can check this out
    http://www.linux-mag.com/2003-04/diy_01.html
    goodluck and sorry if I was not able to help you much man but I am just a graduate and am learning all the time.
    Prash

Maybe you are looking for