Accumulated depreciation in FA not tally with GL account

Hi Expert,
We have a issue for the Accumulated depreciation in FA not tally with GL account. The amount for the accumulated depreciation in the GL initially uploaded (amount not correct difference by 1cents) is not tally with fixed asset module. We unable to adjust the amount due to the accumulated depreciation GL account is set to "Recon. account for acct type- A Asset". Standard SAP is not allowed us to change the error message to warning message.
Any idea how to settle this issue?

Hi Janet,
Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and TType 100. Don't fill in asset number.
Give only for this case authorization for ABF1 when the values are ok take away this authorization

Similar Messages

Reg:F.19 report figures are not tallying with gl account 208030. Why?

hi boss
F.19 report figures are not tallying with gl account 208030. Why?
pls urgent
amk

Hi,
We have had GO-LIVE on 2008 April. They have executed balances carry forwrad for 2008 only. Do they need to carry forward balances for 2007 also?
Is this the reason, that the system is showing differances in F.08 report.
Kindly help me
Thanks
Kishore
Edited by: Emergys Corp on Nov 24, 2009 8:56 AM

Assets balance Report(T Cd s_alr_87011964) Not Tally with GL Code in FBL3N

Hi Friends
SAP Standard Assets balance Report(T Code s_alr_87011964 and s_alr_87011963 ) Not Tally with GL Code in FBL3N.
In SAP report coming with Report Date but FBL3N coming with Posting Date
So How I add Posting Date input parameter in Sap Standard Report. Please help me
Thanks & Regards,
Hemant Kumar

Hi Vinod,
I hoe that you are doing reconcilation between Asset ledger & FI ledgers. Before that just run ABST ,there u can findout whatever the documents not assigned to FI.
Asset is subledger to GL.It is automatically updated through determination,while post GRN to capital goods.In somecases bsuiness remove the reconcilation acount and do some adjustments that time that report not match with FBL3N.
You can run ABST then u can get details
Best rgds
Mani

AR01 REPORT IS NOT TALLYING WITH GL BALANCE

Dear SAP Guru's
AR01 report is not tallying with CWIP gl. during our observation, we found that out of four CWIP assets two of them showing over balance and two of them showing under balance. but when i tried for settling these assets to actual assets, system shows no value for settlement. But when i try for Scrapping, system is allowing for scrapping from these CWIP assets. In General, when ever value is lying in the CWIP, system will allow for settlement, but why in these case it is not allowing. What could be the reason ..for .CWIP assets shows Under/Over value.
Please advice.
regds

Dear Ravi..
Thanks for your early reply...
01. As per the Program documentation, it shows that these report should be executed only before year end closing.
Is there any effect if i execute now.
02. For Your information, i know the exact difference of balance which both AR01 and CWIP GL shows, so to what extent this program ABST2)will help.
03.It would be helpful to me if you have any solution to resolve it.
04. Actually this problem was existing from more than 3 fiscal years...our auditors did not recognize it..now management recognised and want to rectify. If i reverse any entries it will effect previous Statutory reports, so without effecting the previous statements i have resolve it.
Regds,

Currency conversion - Line item total does not tally with account balance

hi guys!
we are currently going through currency conversion in Zimbabwe and we are at preparation stage. i have got 3 issues:
1. while trying to run program RFSEPA02 the following error is appearing-
   -Line item total does not tally with account balance
2. i might need to retrieve some FI documents whic were archived. how do i retrieve archived documents
3. i might also be required to delete(if its an option) some records so tha line item total will tally with account balance

put a break-point @
if t_balance_items_hw[] <> t_balance_account_hw[] or
     t_balance_items_tw[] <> t_balance_account_tw[].
    perform dequeue_account.
    message e099.
*   Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
endif.
endform.                               " CHECK_ACCOUNT_BALANCE_2
and debug y it is getting the error.
Short text
Switch On Open Item Management by Changing Master Record
Description
This program activates open item (OI) management for a G/L account and makes the necessary changes to documents already posted. These are then displayed afterwards as open items. It does not process the open items any further. In reversed documents especially, it does not reenter clearing data in the document.
Requirements
No items can already be archived from this account.
Caution: Company policy must be in place to ensure that this does not happen.
Some G/L accounts cannot be managed on an open item basis, especially G/L accounts that are used in account determination for automatic transactions (for example, accounts set up for transactions MVA or VVA, or accounts which are posted to using posting keys set up for account type M).
Caution: Before making any changes, check that the G/L account can really be managed on an open item basis. If necessary, contact your SAP consultant.
The account must be blocked from posting since any new documents posted at the same time as converting documents and postings for this account would not be entered.
Output
When using the list log, each document that was changed is listed. In addition, the total of the changed BSIS/BSAS entries and the total of the changed documents is listed.
Regards
Prabhu
Message was edited by: Prabhu Peram

How to fix the issue Total CN amount show in FSCM not tally with total CN amount in GSAP?

Hi ,
How to fix the issue that is Tolat CN amount show in FSCM not tallying with Total CN amount in GSAP?
Can somepone reply for this asap ?

Hi Janet,
Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and TType 100. Don't fill in asset number.
Give only for this case authorization for ABF1 when the values are ok take away this authorization

App store update shows I can't update an app since my Apple ID is not associated with my account on Yosemite

App store update shows I can't update an app since my Apple ID is not associated with my account on Yosemite. How can I just force it to allow me to RE-BUY the app again since I don't even have it to update, but I want it?
Currently, I even though I don't have the app, I am not given the option to buy, only to "update", and when I click on that it either hangs or it complains that it can't since my Apple ID is not associated with my account.

And it was your wife's Apple ID that was used to download and install the Yosemite you are using on this computer? If so then I suggest you need to contact Apple to get his straightened out.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

Am using firefox 5 and am not able of uploading any file as attachmenet using my Yahoo email account , this problem does not happen with hotmail account or when using IE.

when sending email through yahoo account , i cant upload any attachment with email, a sign of uploading lasts forever without uploading the file.
this issue do not happen with hotmail account or when using IE to browse Yahoo account.

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Accumulated Depreciation Balance in AA is not matching with GL account

Hi Guru's
The balance of Accu. Depre. in AA is not equal to GL account balance. I ran report for one asset class, it shows Acc. Depre. Balance is 1,20,000 but I wanted to open FBL3N and gave GL account to getting balance is 1,00,000.
Kindly help me for the incident.
Thanks,
MowliT

Dear MowliT,
For your trouble, the cause can be many so please refer to information below, it may help you to figure out the solution.
Critical Factor
The values in Asset Accounting do not agree with the balances of the general ledger accounts. As possible consequences, the external auditor might not be able to certify the closing, or it may not be possible for the closing to be submitted to tax authorities.
Recommendation and Troubleshooting Perform a reconciliation of the values of Asset Accounting with the balances of the general ledger accounts. We recommend the following procedure:
1. Start report RAABST02. If the report logs differences in table EWUFI_BAL (table FAGLFLEXD if the New G/L functionality is active) , proceed with the following steps. If the report does not find any differences, the general ledger and subsidiary ledger are consistent to each other.
2. For the account concerned, compare the last two fiscal years using the account display transaction (FS10N or FAGLB03 in New G/L) in the General Ledger. If the closing balance and opening balance differ, you have to start the balance carryforward program again for the current year.
3. Create two asset history sheets for the accounts involved using the following parameters:
u2022     Limiting the account assignment or the asset class in the dynamic selections
u2022     Sort version 0020
u2022     Group totals
u2022     Report date u2013 fiscal year end of prior year and current year
u2022     Setting u201CDepreciation postedu201D If the starting and final value of the asset   history sheets are different, you should repeat the fiscal year change in asset accounting ( transaction AJRW).
If the starting and final values are still different after you repeat the fiscal year change, then check to see if there is an asset with a capitalization date but without acquisition data. Follow the procedure outlined in SAP Note 194635.
4. The asset history sheet for the previous year does not agree within itself when you cross-foot. In this case:
    a) Start RAABST01 for accounts with line item management.
    b) Start RAABST02 for reports without line item management.
    c) If the balance carryforward is affected, you now have to reset the year-end closing, perform depreciation recalculation, possibly carry out a depreciation posting run, and then run the year-end closing again.
5. The starting balance values of the current year do not agree with the value of the balance display. There are various possible causes, that then also require different actions on your part.
     a) The difference arose already during the legacy data transfer. In this case, contact SAP Remote Consulting.
     b) Missing line items. To see which line items are involved, see the log of RAABST01 or RAABST02. There are two possible scenarios:
u2022     Missing line items during asset acquisition. These can be created easily using report RACORR05. In the case of multiple account assignments, use report RACORR05A.
u2022     Missing line items during asset retirement. These can not be created using report RACORR05. In this case, contact SAP R/3 Support, describing the exact parameters of the asset concerned.
    c) Line items with incorrect acquisition year. This situation is found at times with postings from invoice verification (transactions MRHR or MIGO). For correcting this problem, there are a number of correction reports that are listed in SAP Note 366848. If you are unsure of how to proceed, contact SAP Support.
    d) Account determinations that have errors or are incomplete can also cause differences, which cause errors during the euro conversion, if not before. For these errors, you should now, at the latest, consider your results from point 2.
    e) Manual postings to asset balance sheet accounts. In this case, contact SAP Remote Consulting, with the document numbers involved.

FAGLB03 peroid balance not tallying with line items within

Hi,
When i go to FAGLB03 and tally the balance of a recon account for a particular month with the line items in it, it does not tally
This is happening for one period within the fiscal year, others period balance tally with the line items
What can be the solution for this?
Regards,
Parin

Hi Parin,
You did not confirm still whether the account in FAGLF03 is the same account that you are trying to view.
This issue will require careful analysis in the system as there could be more than one reasons.One of the likely possibilities is missing BSIS line items. As it is a technical reconciliation issue, please create a message for processing.
FBL3N report that you executed also points towards that. I hope that you ran the report for all items posted in that period.
If you ran it only for open items, then there is also a possibility of a possible clearing issue.
Anyway , the best route will be to open a message in FI inconsistencies component and let SAP investigate further.,
Best Regards,
Shrikant

MM not tally with FI

when i print report MB5S to compare with FBL3N base on a clearing account, I found you both report not tally. This is become user may key in the vendor invoice directly to through FB60 without go thorugh the MM module. How to rectify this error so that both will be tally?

MB5S -- is only for MM transactions...where you can tally the GR & IR details.
Comparing with FBL3N with MB5S is possible only the documents posted thru MM .You can chekc the document type ; RE , RP , RL.
Documents posted using the document type:KR, KG can't chekc against the MB5S......
While executing the FBL3N exclude the Document types KR, KG, SA.
VVR

Report FBL3N is not tally with GLPCT

Dear expert.
I'm using SAP ECC6 and find out some weird case.
When i run FBL3N,the data that is suppose to store in GLPCT is not in GLPCT.
I never face this problem before.
Usually if i run FBL3N report, the data with profit center i can compare the output with GLPCT table. But not when i implementing SAP ECC6 version.
Kindly help me

Dear Expert,
Kindly take note that the particular account is not a recon account. Its the sales account. Does this has something to do with this new version of SAP.

GL balance in FS10N not tally with KE5Z due to trx posted to FI but not CO

Hi,
Need help to solve this problem.
Some of our FI postings were not reflected in the Profit Center accounting therefore when we compare GL balances in FS10N against KE5Z, the figure does not tally.
Suspected when the transaction was posted, the cost element for the GL was not created yet.
ie GL account 123456 created in 01.10.2009, transaction posted in 06.10.2009, but the cost element for 123456 was only created on 12.10.2009. Therefore the transaction posted on 06.10.2009 only updates FI but not on the CO side. Not sure whether this is the actual reason or could be due to other reasons.
Is there any way to reverse/repost such that figures from the 2 tcodes tally? Thank you in advance.

Hi Azmin,
thanks for your reply, but I have actually tried using 1KE8 but I got an error log "Account xxx requires an assignment to a CO object". Therefore I wonder if there is any other tcode that I can use or should I perform certain step first before I can use 1KE8.

I purchased some movies off iTunes from my account from my fathers IPad as a gift but didn't realize can not view if not logged with my account. Is there any way to save directly to the IPad (regardless of account)? Or transfer to him so he can view have?

I purchased some movies off iTunes from my account (but from my father IPad) to download as a gift,
but didn't realize he can not view if not logged in with my account.
Is there any way to save directly to the IPad (regardless of account) so he can view?
Or transfer to his account?
Or is any was to cancel the recent purchase if can not transfer as I will not watch these myself?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Lightroom 2.5 not printing with main account user but prints with a new use

I have been troubleshooting all day. My new epson r280 is not printing with LR2.5 though it prints in other applications fine. Called epson and we are sure that I have the latest drivers, etc. Called Adobe and they had me create a new user in accounts in system preferences-accounts. When I tried printing from the "test user" LR printed with my epson printer. Adobe said the problem was with my system permissions and I had to reset my system permissions. This doesn't sound right to me. I ran disk utility and repaired my permissions but LR still doesn't print using my original user. Genius Book suggests going to Library-Preferences and to delete the plist. Does this sound right? And do I delete the p-list for LR or for the epson printer? What happens when you delete a p-list? Will I lose my catalog in LR? I would appreciate any help on this problem.

Just trying again to see if anyone has any solutions for this question. Thanks

Accumulated depreciation in FA not tally with GL account

Similar Messages

Maybe you are looking for