Accuradio via Airport Express

Don't you know if could play an Accuradio stream via Airport Express? Thanks.

BigFoot_ wrote:
Any other suggestions?
start another thread in the iPad forum.
good luck !

Similar Messages

  • Accuradio stream via airport express

    I'm thinking about getting AE to stream music wirelessly. Do you know if I'll be able to play Accuradio via airport express? Thanks.

    BigFoot_ wrote:
    Any other suggestions?
    start another thread in the iPad forum.
    good luck !

  • Unable to print to my Oki C3200 via Airport Express

    Hi
    I wish to print wirelessly via Airport Express using my Oki C3200 printer. I have followed all the recommended install procedures.
    I am using a Windows Vista Home Premium 32 bit PC, have configured the printer with Bonjour for Windows, and still cannot print.
    The printer works fine if connected by USB direct to the PC.
    Any help appreciated.

    Yes, my iMac is hooked to my Airport Extreme through it's ethernet port.
    No, I don't have AIM.

  • When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

    When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Best way to extend wireless via airport express and time capsule

    best way to extend wireless via airport express and time capsule
    i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
    i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
    secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
    what do you recommend?
    we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
    thank you

    What you have would appear to be working but I can comment how I would redefine your setup.  Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
    You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model.  The iPhone 4 can use 5 GHz and 802.11n.  Can’t comment on the Sony and Samsung but you can check their specs.
    Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time.  Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz.  If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
    You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express.  Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
    Recommend you use the Time Capsule as the Base station.  When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
    Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”. 
    Hope that helps.

  • Can I play tracks from my iPod via Airport Express on only from my laptop?

    I can play tracks from my laptop thorugh my Bose Lifestyle  Airport Express.  Is there a way to play tracks from my iPod Touch through my Bose system via Airport Express?   My Airport Express is set up as a client to my Sky Broadband wireless router.

    I set up my laptop to my Bose Lifestyle System via Airport Express. It may be different for MAC but I just downloaded the Airport Express software and followed the on-screen set-up procedure, which includes entering your WI-FI key.  I do not have an iPad.  You need to select Airport Express in iTunes as your sound media. This is easily switched by an icon in the bottom right corner of the screen.  You will need to switch this back if you want to revert to using the laptop speakers.

  • I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

    I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

    Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?

  • Can we print with a non-wifi printer via Airport Express?

    Is it possible to print with non-wifi printer via Airport Express?

    Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667

  • Can't find certain servers connecting via Airport Express

    For the last couple of weeks I've been intermittantly unable to access certain websites (time.com / nytimes.com) when connected to the Net via Airport Express. Sometimes these pages come up, more often then not, they don't. I have no problem receiving email or accessing other sites. Also, I always loose my connection when streaming news stories from NPR. However, I have no such problem when connected directly via ethernet. Thus, it seems to be some glitch with airport express. Does this make sense to anyone?

    Gerard Van Schip wrote:
    I have 3 printers connected to the network via Ethernet and as long as I'm connected directly to the network I can print but as soon as I connect to one of the 4 Airport Express units I have I can no longer print.
    You don't describe what happens when you try to print.
    Does the IP address your computer is granted in both configurations match in the first three elements (such as 10.0.1.5 and 10.0.1.7)? If not, then your AirPort Express unit is creating a new "subnet", which can cause problems when your computer tries to communicate with the printer.
    Try adding the printer in the "Print & Fax" panel of System Preferences by choosing the "IP" option and entering the IP address of the printer.

  • Connecting computers via Airport Express

    I have a problem that I've been trying to solve, but so far nothing has worked.
    I have three Macs, 2 G4 PowerBooks and an iMac (Core 2 Duo) which are all connected via an Airport Express. All of the computers can access the net and my printer just fine. The iMac can connect to both of the G4s, and one of the G4s can connect to both the iMac and the other G4. The problem is that one of the G4s can only connect to the other G4, not the iMac. It's as though the iMac does not exist for it's purposes. Yet I can connect to that G4 from the iMac, just not the other way around.
    Any clues as to a fix for this would be greatly appreciated.

    That is what you want to select.
    You jumped into the middle of this thread. What
    problem do you have?
    More to the point - what is YOUR problem...I think your response was a little rude...
    One who has common sense can see what issue I am having simply by looking at the subject of the original post - and reading my entire post.
    For your benefit, the subject is: Problems Connecting Two Computers to Cable Modem via AirPort Express.
    If you read my post again, you will see that after following the advice given by Rj, I am still having problems. I will not re-post my question. Simply restating things in this post has been a waste of time.

  • Trying to get my Viera TX-P42S30B hooked up to me home network via Airport express with no luck.

    Trying to get my Viera TX-P42S30B hooked up to my home network via Airport express with no luck.
    Have tried both wired (network cable) and wireless to no avail, can't find much info online, any help appreciated !
    Airport utility 5.5.3
    Airport Extreme 802.11n
    Airport Express 802.11g

    The problem is that the AirPort Express (AX) is creating a subnet.
    To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address).

  • HT3669 Failed printer setup, bonjour via airport express on 10.8.3, unable to download drivers?

    Trying to install a Samsung SCX-4500 printer over bonjour via airport express. My Mountain Lion machine sees the printer and I've manually installed the latest Samsung drivers, it says it can't find the software on Apple's servers. I just downloaded the latest drivers from Samsung directly, it did not resolve the problem.
    I am unable to select printer drivers manually for the 4500; even if I manually select the 4500W drivers it still attempts to download software (unsuccessfully). It works perfectly on 2 Lion machines and a PC, unsure what the deal is.
    I'm having trouble even getting the post message' button to work now, it isn't my day...

    Link to Apple supplied print drivers:
    Samsung Print Drivers
    You can also try resetting the print system:
    Reset Printing System

  • Speaker volume via Airport Express

    My iTunes volume plus the volume on my speakers are both set to the maximum but the music volume is very low when I play iTunes through my speakers via Airport Express - much lower than if I plug my iPhone directly into my speakers
    Any tips on how to fix this would be much appreciated
    Thanks!

    have you tried to power cycle your gear ?
    shut everything down for 10 minutes. then, in intervals of 5 minutes, turn the modem back on, followed by the main router, the express next, and you computer last.
    does the problem persist ?

  • Play youtube via airport express

    Hello, I have been playing iTune through the house's sound system via airport express.
    How could I play youtube to the house's sound system via airport express ? Many thanks.

    Airfoil is what you need.

  • Printer Spooling via Airport Express...

    My G4 is connected via Airport Express to a printer. It has worked fine, in the past, but now when trying to print, it appears to connect but then a message reads, "spooling" and hangs without ever printing. What should I do to correct this, please?

    Have you tried posting this in the "Airport Express" Category of the Forum?
    If not, I'd suggest that as you may get more help there.
    http://discussions.apple.com/forum.jspa?forumID=1011

Maybe you are looking for