ACCUWEATHER appliation error

With the application AccuWeather have the problem in my laptop - after opening it is crashed many times and get the error in Windiws Error Reporting in
Event Viewer Windows 8.1 64 bit (have translated from Polish into English ) :
Source: Application
Error
Identification
:1000
Category:(100)
Descritption:
name of the application error:
AccuWeather.Windows.Windows.exe, version: 1.0.0.0, time signature:
0x54638365
modem making error:
D3DRenderer.Windows.dll, version: 0.0.0.0, 0x5463835d
Identification of proccess making error:
0x13e8
Time of opening application
making error: 0x01d064ae6fc372c0
The
apllication error :
C:\ProgramFiles\WindowsApps\AccuWeather.AccuWeatherforWindows8_4.0.0.60_x64__8zz2pj9h1h1d8\AccuWeather.Windows.Windows.exe
Modem making error:
C:\ProgramFiles\WindowsApps\AccuWeather.AccuWeatherforWindows8_4.0.0.60_x64__8zz2pj9h1h1d8\D3DRenderer.Windows.dll
Complete name of the batch making
error:
AccuWeather.AccuWeatherforWindows8_4.0.0.60_x64__8zz2pj9h1h1d8
Could you please advice how to solve the
problem ?
Would appreciate some advices. Ewa

Hi,
Thanks for your reply.
Below please find the descriptions of the the events copied/it is only in Polish in my laptop/ reg. AccuWeather from Administrative Events as not sense to send you all administrative logs.
1.
Nazwa dziennika:Application
Źródło:        .NET Runtime
Data:          2015-03-29 23:56:35
Identyfikator zdarzenia:1026
Kategoria zadania:Brak
Poziom:        Błędy
Słowa kluczowe:Klasyczny
Użytkownik:    Nie dotyczy
Komputer:      Lenovo-PC
Opis:
Aplikacja: AccuWeather.Windows.Windows.exe
Wersja architektury: v4.0.30319
Opis: proces został przerwany z powodu nieobsłużonego wyjątku.
Informacje o wyjątku: System.AccessViolationException
Stos:
   w D3DRenderer.RendererAbiProxy.TransitionWeather(D3DRenderer.WeatherInfo, Single)
   w D3DRenderer.RendererAbiProxy.TransitionWeather(D3DRenderer.WeatherInfo, Single)
   w AccuWeather.Windows.Windows.Controls.SwapChainPanelEx.TransitionWeatherInfo(D3DRenderer.WeatherInfo)
   w System.ComponentModel.PropertyChangedEventHandler.Invoke(System.Object, System.ComponentModel.PropertyChangedEventArgs)
   w System.ComponentModel.PropertyChangedEventHandler.Invoke(System.Object, System.ComponentModel.PropertyChangedEventArgs)
   w System.ComponentModel.PropertyChangedEventHandler.Invoke(System.Object, System.ComponentModel.PropertyChangedEventArgs)
   w AccuWeather.Windows.Windows.ViewModels.MainViewModel.HandleTimelineSliderDailyValueChanged()
   w AccuWeather.Windows.Windows.ViewModels.MainViewModel+<GetForecast>d__2b.MoveNext()
   w System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Runtime.CompilerServices.AsyncMethodBuilderCore+MoveNextRunner.Run()
   w System.Threading.Tasks.AwaitTaskContinuation.RunCallback(System.Threading.ContextCallback, System.Object, System.Threading.Tasks.Task ByRef)
   w System.Threading.Tasks.Task.FinishContinuations()
   w System.Threading.Tasks.Task`1[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]].TrySetResult(System.__Canon)
   w System.Runtime.CompilerServices.AsyncTaskMethodBuilder`1[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]].SetResult(System.__Canon)
   w AccuWeather.Windows.Windows.Services.WeatherDataService+<GetForecastAsync>d__b.MoveNext()
   w System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Runtime.CompilerServices.AsyncMethodBuilderCore+MoveNextRunner.Run()
   w System.Threading.WinRTSynchronizationContext+Invoker.InvokeCore()
   w System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Threading.WinRTSynchronizationContext+Invoker.Invoke()
Kod XML zdarzenia:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-29T21:56:35.000000000Z" />
    <EventRecordID>9272</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Lenovo-PC</Computer>
    <Security />
</System>
<EventData>
    <Data>Aplikacja: AccuWeather.Windows.Windows.exe
Wersja architektury: v4.0.30319
Opis: proces został przerwany z powodu nieobsłużonego wyjątku.
Informacje o wyjątku: System.AccessViolationException
Stos:
   w D3DRenderer.RendererAbiProxy.TransitionWeather(D3DRenderer.WeatherInfo, Single)
   w D3DRenderer.RendererAbiProxy.TransitionWeather(D3DRenderer.WeatherInfo, Single)
   w AccuWeather.Windows.Windows.Controls.SwapChainPanelEx.TransitionWeatherInfo(D3DRenderer.WeatherInfo)
   w System.ComponentModel.PropertyChangedEventHandler.Invoke(System.Object, System.ComponentModel.PropertyChangedEventArgs)
   w System.ComponentModel.PropertyChangedEventHandler.Invoke(System.Object, System.ComponentModel.PropertyChangedEventArgs)
   w System.ComponentModel.PropertyChangedEventHandler.Invoke(System.Object, System.ComponentModel.PropertyChangedEventArgs)
   w AccuWeather.Windows.Windows.ViewModels.MainViewModel.HandleTimelineSliderDailyValueChanged()
   w AccuWeather.Windows.Windows.ViewModels.MainViewModel+<GetForecast>d__2b.MoveNext()
   w System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Runtime.CompilerServices.AsyncMethodBuilderCore+MoveNextRunner.Run()
   w System.Threading.Tasks.AwaitTaskContinuation.RunCallback(System.Threading.ContextCallback, System.Object, System.Threading.Tasks.Task ByRef)
   w System.Threading.Tasks.Task.FinishContinuations()
   w System.Threading.Tasks.Task`1[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]].TrySetResult(System.__Canon)
   w System.Runtime.CompilerServices.AsyncTaskMethodBuilder`1[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]].SetResult(System.__Canon)
   w AccuWeather.Windows.Windows.Services.WeatherDataService+<GetForecastAsync>d__b.MoveNext()
   w System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Runtime.CompilerServices.AsyncMethodBuilderCore+MoveNextRunner.Run()
   w System.Threading.WinRTSynchronizationContext+Invoker.InvokeCore()
   w System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   w System.Threading.WinRTSynchronizationContext+Invoker.Invoke()
</Data>
</EventData>
</Event>
2.
Nazwa dziennika:Application
Źródło:        Application Error
Data:          2015-03-29 23:56:35
Identyfikator zdarzenia:1000
Kategoria zadania:(100)
Poziom:        Błędy
Słowa kluczowe:Klasyczny
Użytkownik:    Nie dotyczy
Komputer:      Lenovo-PC
Opis:
Nazwa aplikacji powodującej błąd: AccuWeather.Windows.Windows.exe, wersja: 1.0.0.0, sygnatura czasowa: 0x54638365
Nazwa modułu powodującego błąd: D3DRenderer.Windows.dll, wersja: 0.0.0.0, sygnatura czasowa: 0x5463835d
Kod wyjątku: 0xc0000005
Przesunięcie błędu: 0x00000000000419fa
Identyfikator procesu powodującego błąd: 0xfbc
Godzina uruchomienia aplikacji powodującej błąd: 0x01d06a6b31a17468
Ścieżka aplikacji powodującej błąd: C:\Program Files\WindowsApps\AccuWeather.AccuWeatherforWindows8_4.0.0.60_x64__8zz2pj9h1h1d8\AccuWeather.Windows.Windows.exe
Ścieżka modułu powodującego błąd: C:\Program Files\WindowsApps\AccuWeather.AccuWeatherforWindows8_4.0.0.60_x64__8zz2pj9h1h1d8\D3DRenderer.Windows.dll
Identyfikator raportu: 775dd443-d65e-11e4-8277-60029202d5d9
Pełna nazwa pakietu powodującego błąd: AccuWeather.AccuWeatherforWindows8_4.0.0.60_x64__8zz2pj9h1h1d8
Identyfikator aplikacji względem pakietu powodującego błąd: App
Kod XML zdarzenia:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-29T21:56:35.000000000Z" />
    <EventRecordID>9274</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Lenovo-PC</Computer>
    <Security />
</System>
<EventData>
    <Data>AccuWeather.Windows.Windows.exe</Data>
    <Data>1.0.0.0</Data>
    <Data>54638365</Data>
    <Data>D3DRenderer.Windows.dll</Data>
    <Data>0.0.0.0</Data>
    <Data>5463835d</Data>
    <Data>c0000005</Data>
    <Data>00000000000419fa</Data>
    <Data>fbc</Data>
    <Data>01d06a6b31a17468</Data>
    <Data>C:\Program Files\WindowsApps\AccuWeather.AccuWeatherforWindows8_4.0.0.60_x64__8zz2pj9h1h1d8\AccuWeather.Windows.Windows.exe</Data>
    <Data>C:\Program Files\WindowsApps\AccuWeather.AccuWeatherforWindows8_4.0.0.60_x64__8zz2pj9h1h1d8\D3DRenderer.Windows.dll</Data>
    <Data>775dd443-d65e-11e4-8277-60029202d5d9</Data>
    <Data>AccuWeather.AccuWeatherforWindows8_4.0.0.60_x64__8zz2pj9h1h1d8</Data>
    <Data>App</Data>
</EventData>
</Event>
Have also received the reply from somebody else / from scial techent/ :
"some users reported this app no longer working in Windows 8.1
contact software manufactured for best answer".
Hve contacted aleady the manufacturer but till now no reply how to fix the problems.
Not sure if there is still a solution.
Thanks for your activity and best regards, Ewa

Similar Messages

Error in Appraisal HAP_DOCUMENT bsp appliation - Weight zero for objectives

Error in Appraisal HAP_DOCUMENT bsp appliation - My client requirement is to store appraisal document with induvidual performance objectives even with zero (0.00) weighting. But on processing (saving/navigating to next status), standard business check "FM HRHAP_BC_DOC_BODY" is called which checks for "Weighting can't be 0,00"... Is there a way to skip this...
(Note - the default weighting for each of the five induvidual objectives is assigned as 20. On going into the document and on chaning this weighting for any one or for more than one weighting to zero, this standard check is performed)
Suitable answers / suggestions would be rewarded....

I dont think that is possible.
ESS is based on netweaver platform, and we can show a BSP page in that.
But the structure of HAP document is completely different where in there are many documents and also there is a controller which also plays a crutial role.
Regards.

Getting error in this appliation

i am gettin error in this application saying SELECT should be follwed by ENDSELECT... but i am using joins ... then y i am gettin this error ... i am sending u the code...
REPORT Z_SB_PURCHSEDOC
        NO STANDARD PAGE HEADING
        LINE-SIZE 220.
TABLES: EKKO, "Purchasing Document Header
        EKPO, "Purchasing Document Item
        EKBE. "History per Purchasing Document
DATA: BEGIN OF ITAB OCCURS 0,
      EBELN LIKE EKKO-EBELN,   "Purchasing Document Number
      EKGRP LIKE EKKO-EKGRP,   "Purchasing Group
      AGDAT LIKE EKPO-AGDAT,   "Deadline for Submission of Bid/Quotation
      PEINH LIKE EKPO-PEINH,   "Price Unit
      MATNR LIKE EKBE-MATNR,   "Material Number
      EBELP LIKE EKBE-EBELP,   "Item Number of Purchasing Document
      WRBTR LIKE EKBE-WRBTR,   "Amount in document currency
      MENGE LIKE EKBE-MENGE,   "Quantity
      UNITCOST(15) TYPE N,
      END OF ITAB.
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-T01.
SELECT-OPTIONS: SMATNR FOR EKBE-MATNR,
                SAGDAT FOR EKPO-AGDAT,
                SEKGRP FOR EKKO-EKGRP.
SELECTION-SCREEN END OF BLOCK BLK.
TOP-OF-PAGE.
ULINE (155).
WRITE:/10 'REPID: 1234',40 'LANCO INFRATECH',80 'DATE:',SY-DATUM,
        /38 'VENDOR MASTER REPORT',80 'PAGE NO:',SY-PAGNO.
ULINE (155).
SKIP.
SKIP.
ULINE (155).
WRITE:/ SY-VLINE,5 'SNO',
        10 SY-VLINE,
        15 'MATERIAL NUMBER',
        34 SY-VLINE,
        35 'PURCHASING DOC NO',
        49 SY-VLINE,
        50 'ITEM NO OF PURCHASING DOC',
        79 SY-VLINE,
        80 'AMT IN DOC CURRENCY',
       109 SY-VLINE,
       110 'QUANTITITY',
       128 SY-VLINE,
       130 'UNITCOST',
       138 SY-VLINE,
       140 'PRICE UNIT',
       155 SY-VLINE.
ULINE (155).
ULINE (155).
START-OF-SELECTION.
SELECT T1~EBELN
         T1~EKGRP
         T2~AGDAT
         T2~PEINH
         T3~MATNR
         T3~EBELP
         T3~WRBTR
         T3~MENGE
         INTO CORRESPONDING FIELDS OF ITAB
         FROM EKKO AS T1
         INNER JOIN EKPO AS T2
         ON T1EBELN = T2EBELN
         INNER JOIN EKBE AS T3
         ON T1EBELN = T3EBELN
         WHERE T1~EKGRP IN SEKGRP.
END-OF-SELECTION.
LOOP AT ITAB.
    WRITE: / SY-VLINE,5 SY-TABIX,
            10 SY-VLINE,
            15 ITAB-MATNR,
            34 SY-VLINE,
            35 ITAB-EBELN,
            49 SY-VLINE,
            50 ITAB-EBELP,
            79 SY-VLINE,
            80 ITAB-WRBTR,
            109 SY-VLINE,
            110 ITAB-MENGE,
            128 SY-VLINE,
            130 ITAB-UNITCOST,
            138 SY-VLINE,
            140 ITAB-PEINH,
            155 SY-VLINE.
ENDLOOP.
Thanx & Regards,
PHANINDER GOLLAPUDI.

Hi,
You need to include the keyword TABLE before the internal table name (ITAB) in your select query as follows.
SELECT T1~EBELN
T1~EKGRP
T2~AGDAT
T2~PEINH
T3~MATNR
T3~EBELP
T3~WRBTR
T3~MENGE
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM EKKO AS T1
INNER JOIN EKPO AS T2
ON T1EBELN = T2EBELN
INNER JOIN EKBE AS T3
ON T1EBELN = T3EBELN
WHERE T1~EKGRP IN SEKGRP.
The reason why the ENDSELECT is required without TABLE additon is that the select query consider's that you are selecting records one by one from table EKKO and EKPO, hence it asked for the 'ENDSELECT' statement.
If you specify the 'TABLE' keyword,then the program would have considered that you are selecting all the reocords meeting the selection criteria at once into internal table.
Hope this helps....
Regards,
Dilli

Appliation install with error 0xE800801C

Hello,
I installed iOS4.3 using the crappy iTunes and almost lost my phone due to stuck firmware update. After 4 hours of hard work could recover it.
Now I can not install an application (Run Keeper), and the horrible iTunes returns me error 0xE800801C. When I press "Learn more button", painful iTunes points me to a non-existent Web page on the Apple site.
Since Apple provides no correct support in this area, despite I have a brand new phone, could anyone help me ?
Thanks.
Olivier

I'd like Apple to provide a solution to this problem. I was also affected by the latest firmware update. It froze during the backup/update process for hours. I cancelled the sync which looked to be OK since it was during the backup process.
Later I tried running some songs in my car and only 1 track existed. I then tried connecting to my computer to resync my music and it said it was unable to load the contents of the iphone and the only way to fix was to restore. I tried finding methods without restoring and all I could find was solutions for Jailbroken phones- very simple solutions.
I do not want to jailbreak my phone so I restored...it then froze during that.
After many restore attempts in DFU mode I got my phone restored.
I tried readding my apps and only about 5 of my 40 apps installed OK.
The rest get the error listed in this thread.
I could careless about the Free Apps though it will be disappointing to have to re-setup some apps and replay levels in some games.
What I'm mostly concerned about is the Apps that I paid for... if I can't get my App backups onto my phone then I'm going to be far from happy if I need to re-buy apps I already purchased.
I've never considered jailbreaking a phone, nor do I want to. But it bothers me that there's a lot of easy solutions for jailbroken phones. I hope Apple provides a solution to this- be it a fix. Or if I am out of those paid apps that I get some sort of credit towards my losses. (which I doubt I'll get).

Application Error: Unable to launch application

Hi guys,
My name is Jay Sun and I am new this this Forums. I am told by my professor to migrate from this Java application to Java Web Start.
I read all about it but I'm still struggling. I have an example program called Traffic Light. From the TrafficLight class,
I created a .jar file from .java file. The jar file runs perfectly fine and I created a .jnlp file using this.<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+"
codebase="file:///C:/Documents and Settings/HP_Administrator/Desktop/TrafficLight" href="TrafficLight.jnlp">
<information>
<title>Traffic Light</title>
<vendor>Java Developer Connection</vendor>
<homepage href="/jdc" />
<description>Demonstration of JNLP</description>
</information>
<offline-allowed/>
<resources>
<j2se version="1.6+" />
<jar href="TraffcLight.jar"/>
</resources>
<application-desc main-class="Traffic Light" />
</jnlp>That's my .jnlp file.
My .java file is below it.import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class TrafficLightFrame extends JFrame {
// These are the window's components
private JRadioButton[] buttons = new JRadioButton[3];
private JButton advButton;
private JProgressBar progressBar;
private JSlider slider;
private JComboBox actionList;
private JCheckBox autoButton;
public TrafficLightFrame(String title) {
super(title);
buildWindow();
setDefaultCloseOperation(EXIT_ON_CLOSE);
setSize(400, 250);
// Add all components to the frame's panel
private void buildWindow() {
GridBagLayout layout = new GridBagLayout();
GridBagConstraints constraints = new GridBagConstraints();
setLayout(layout);
// Add all the labels
JLabel label = new JLabel("Manual");
constraints.gridx = 0;
constraints.gridy = 0;
constraints.gridwidth = 1;
constraints.gridheight = 1;
constraints.weightx = 0;
constraints.weighty = 0;
constraints.fill = GridBagConstraints.NONE;
constraints.anchor = GridBagConstraints.NORTHWEST;
constraints.insets = new Insets(5, 5, 0, 0);
layout.setConstraints(label, constraints);
add(label);
label = new JLabel("Action");
constraints.gridx = 1;
layout.setConstraints(label, constraints);
add(label);
label = new JLabel("Advance");
constraints.gridx = 2;
layout.setConstraints(label, constraints);
add(label);
label = new JLabel("Timer Progress");
constraints.gridx = 0;
constraints.gridy = 4;
layout.setConstraints(label, constraints);
add(label);
// Add the Radio Buttons
ButtonGroup lights = new ButtonGroup();
JPanel aPanel = new JPanel();
aPanel.setLayout(new BoxLayout(aPanel, BoxLayout.Y_AXIS));
aPanel.setBackground(Color.black);
for (int i=0; i<3; i++) {
buttons[i] = new JRadioButton("", false);
buttons.setBackground(Color.black);
lights.add(buttons[i]);
aPanel.add(buttons[i]);
buttons[0].setText("Red");
buttons[1].setText("Yellow");
buttons[2].setText("Green");
buttons[0].setForeground(Color.red);
buttons[1].setForeground(Color.yellow);
buttons[2].setForeground(Color.green);
constraints.gridx = 0;
constraints.gridy = 1;
constraints.gridheight = 3;
constraints.fill = GridBagConstraints.BOTH;
layout.setConstraints(aPanel, constraints);
add(aPanel);
// Make the Actions List
String[] actions = {"Stop", "Yield", "Go"};
actionList = new JComboBox(actions);
constraints.gridx = 1;
constraints.gridy = 1;
constraints.gridheight = 1;
constraints.weightx = 1;
constraints.fill = GridBagConstraints.HORIZONTAL;
layout.setConstraints(actionList, constraints);
add(actionList);
// Make the Slider
slider = new JSlider(JSlider.HORIZONTAL, 0, 20, 1);
slider.setMajorTickSpacing(5);
slider.setMinorTickSpacing(1);
slider.setPaintTicks(true);
slider.setPaintLabels(true);
constraints.gridx = 1;
constraints.gridy = 3;
layout.setConstraints(slider, constraints);
add(slider);
// Add the auto checkbox button
autoButton = new JCheckBox("Auto Advance");
constraints.gridx = 1;
constraints.gridy = 2;
constraints.fill = GridBagConstraints.BOTH;
layout.setConstraints(autoButton, constraints);
add(autoButton);
// Add the Advance Picture button
advButton = new JButton(new ImageIcon("RedLight.jpg"));
constraints.gridx = 2;
constraints.gridy = 1;
constraints.gridheight = 3;
constraints.weightx = 0;
constraints.weighty = 1;
constraints.fill = GridBagConstraints.BOTH;
constraints.insets = new Insets(5, 5, 0, 5);
layout.setConstraints(advButton, constraints);
add(advButton);
// Add the progress bar
progressBar = new JProgressBar(JProgressBar.HORIZONTAL, 0, 8);
constraints.gridx = 0;
constraints.gridy = 5;
constraints.gridwidth = 3;
constraints.gridheight = 1;
constraints.weightx = 1;
constraints.weighty = 2;
constraints.fill = GridBagConstraints.BOTH;
constraints.insets = new Insets(5, 5, 5, 5);
layout.setConstraints(progressBar, constraints);
add(progressBar);
public static void main(String args[]) {
TrafficLightFrame frame = new TrafficLightFrame("Traffic Light");
frame.setVisible(true);
}When I launch the Java appliation, I get the dialog box error saying "Application Error - Unable to launch the application"
Exception:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: file:/C:/Documents and Settings/HP_Administrator/Desktop/TrafficLight/TrafficLight.jnlp
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Wrapped Exception
java.io.FileNotFoundException: C:\Documents and Settings\HP_Administrator\Desktop\TrafficLight\TrafficLight.jnlp (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doGetRequest(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

actually there are 2 problems here:
file:///Documents and Settings/... will work, but this means the path:
/Documents and Settings/... on the current path.
if you have to include the "c:" part first, then there needs to be only 2 leading slashes, because "/C:/Documents and Settings/..." is not a leagle pathname (even after replacing the file separators).
However the colon (":") char is not legal in a URL, so has to be escaped.
Best to just use: "file:///Documents and Settings/..."
/Andy

Can you help me?the config error about ORACLE Web Application Server3.0 for Solaris,

hello anyone
i install oracle7.3.4 server
in Sun Sparcstation20 Solaris2.6 Japanese
everything is ok,
and i want to install ORACLE
WEB appliation server 3.0too
the installer is ok too,
i startup the serivce
>owsctl start wrb
>owsctl start admin
but when i open the netscape and
CRAETE and START a new LISTENER
there is something wrong.
**************************error message*******
OWS-05721: The Web Listener www failed to start:
Oracle Web Listener 3.0.1 Production (Export), Version 2.14FC1
Copyright 1997 Oracle Corp. All Rights Reserved.
Error: A failure occurred ( Permission denied ) when assigning a port ( domain: INTERNET01, address: 0.0.0.0, port: 80 ).
Error: Failed to start the server.
Error: The server could not initialize
Information: The server is exiting
OWS-08811: Unable to startup Oracle Web Listener `www'.
Oracle Web Listener Home Page
From here, you can do the following:
Create a new Oracle Web Listener to run on your machine by clicking the Create Listener... button.
Modify existing Oracle Web Listeners by selecting the Configure link below.
Start, Stop or Delete existing Oracle Web Listeners by selecting the appropriate link below.
can anyone help me , it is too difficult for me.
the startup file of Solaris is here
# @(#)cshrc 1.11 89/11/29 SMI
umask 022
set path=(/bin /usr/bin /usr/ucb /etc .)
if ( $?prompt ) then
set history=32
endif
setenv ORACLE_BASE /oracle/app/oracle
setenv ORACLE_HOME /oracle/app/oracle/product/7.3.4
setenv ORACLE_SID hlp3
setenv ORAWEB_HOME $ORACLE_HOME/ows/3.0
setenv ORAWEB_SITE www
setenv ORAWEB_BASE $ORACLE_HOME/ows
setenv ORAWEB_ADMIN $ORACLE_BASE/admin
setenv ORAWEB_CARTX $ORACLE_HOME/ows/cartx
setenv DEF_INSTALL TRUE
setenv ORA_CSM_MODE line
setenv LD_LIBRARY_PATH $ORACLE_HOME/lib:/usr/openwin/lib:/usr/dt/lib:
setenv ORACLE_TERM xsun5
setenv TMPDIR /var/tmp
setenv PATH .:$ORACLE_HOME/bin:$ORACLE_HOME/obackup/bin:/opt/bin:/usr/local/bin:/bin:/usr/bin:/usr/css/bin:/usr/openwin/bin:/usr/sbin:/usr/ucb:$ORAWEB_HOME/bin
setenv ORA_NLS32 $ORACLE_HOME/ocommon/nls/admin/data
setenv DEF_INSTALL TRUE
setenv MANPATH /opt/SUNWspro/man:/opt/SUNWste/licence_tools/man
# setenv LANG
# setenv TWO_TASK
set ORAENV_ASK = NO
source /opt/bin/coraenv
unset ORAENV_ASK
source /oracle/app/oracle/product/7.3.4/ows/3.0/install/owsenv_csh.sh
# @(#)local.login 1.3 93/09/15 SMI
stty -istrip
# setenv TERM `tset -Q -`
# if possible, start the windows system. Give user a chance to bail out
if ( `tty` == "/dev/console" ) then
if ( $TERM == "sun" | | $TERM == "AT386" ) then
if ( ${?OPENWINHOME} == 0 ) then
setenv OPENWINHOME /usr/openwin
endif
echo ""
echo -n "Starting OpenWindows in 5 seconds (type Control-C to interrupt)"
sleep 5
echo ""
$OPENWINHOME/bin/openwin
clear # get rid of annoying cursor rectangle
logout # logout after leaving windows system
endif
endif
setenv ORACLE_HOME /oracle/app/oracle/product/7.3.4
setenv PATH /bin:/usr/bin:/etc:/usr/etc:/usr/openwin/bin:/usr/ucb:/oracle/app/oracle/product/734/bin:$ORAWEB_HOME/bin
setenv NLS_LANG japanese_japan.ja16euc
setenv LANG japanese
setenv ORACLE_TERM xsun5
setenv ORAWEB_HOME $ORACLE_HOME/ows/3.0
setenv ORAWEB_SITE www
setenv TNS_ADMIN /oracle/app/oracle/product/7.3.4/network/admin
can anyone help me and tell me how to solve it or any aother way book doc to do it,
thank you
i am very nervious
my email address:
[email protected]
[email protected]

see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html

Error in creating web application through power shell

hi,
i have taken the ps script from the below url :
credits to Roger :
http://blogs.msdn.com/b/rcormier/archive/2012/09/01/how-to-create-sharepoint-web-applications-with-powershell.aspx
http://gallery.technet.microsoft.com/Create-SharePoint-Web-742a8fb9
But when i am running the script, i am getting many errors:
Note: i am not using appln pool account password [as i dont know the password]
want to know whether this paramter is necessary.
$ver = $host | select version
if($Ver.version.major -gt 1) {$Host.Runspace.ThreadOptions = "ReuseThread"}
if(!(Get-PSSnapin Microsoft.SharePoint.PowerShell -ea 0))
Write-Progress -Activity "Loading Modules" -Status "Loading Microsoft.SharePoint.PowerShell"
Add-PSSnapin Microsoft.SharePoint.PowerShell
Write-Progress -Activity "Creating Web Application" -Status "Setting Variables"
#Set Individual Web App Variables
#This is the Web Application URL
$WebApplicationURL = "http://mysrvr:2020/"
#This is the Display Name for the SharePoint Web Application
$WebApplicationName = "myweb1"
#This is the Content Database for the Web Application
$ContentDatabase = "myContentDB"
#Set Common Variables
#This is the Display Name for the Application Pool
$ApplicationPoolDisplayName = "mapppool2020"
#This is identity of the Application Pool which will be used (Domain\User)
$ApplicationPoolIdentity = "mydomain\myidd"
#This is the password of the Appliation Pool account which will be used
#$ApplicationPoolPassword = "Pass@word1"
#This is the Account which will be used for the Portal Super Reader Account
$PortalSuperReader = "i:0#.w|in\hariharan.venugopalk"
#This is the Account which will be used for the Portal Super User Account
$PortalSuperUser = "i:0#.w|in\spinstall.dev"
Write-Progress -Activity "Creating Web Application" -Status "Loading Functions"
#Create Functions
Function CreateClaimsWebApp($WebApplicationName, $WebApplicationURL, $ContentDatabase, $HTTPPort)
    #AppPoolUsed is set when calling the ValidateAppPool function. This will be true if the application pool is already running SharePoint web appplications
    #If the application pool is already being used in web applications, the syntax for New-SPWebApplication changes
    if($AppPoolUsed -eq $True)
        #Create the web application, assign it to the WebApp variable. The WebApp variable will be used to set object cache user accounts
        Write-Progress -Activity "Creating Web Application" -Status "Using Application Pool With Existing Web Applications"
        Set-Variable -Name WebApp -Value (New-SPWebApplication -ApplicationPool $ApplicationPoolDisplayName -Name $WebApplicationName -url $WebApplicationURL -port $HTTPPort -DatabaseName $ContentDatabase -HostHeader $hostHeader
-AuthenticationProvider (New-SPAuthenticationProvider)) -Scope Script
        #Call the SetObjectCache function, which sets the object cache.
        Write-Progress -Activity "Creating Web Application" -Status "Configuring Object Cache Accounts"
        SetObjectCache
    else
        #Create the web application, assign it to the WebApp variable. The WebApp variable will be used to set object cache user accounts
        Write-Progress -Activity "Creating Web Application" -Status "Using Application Pool With No Existing Web Applications"
        Set-Variable -Name WebApp -Value (New-SPWebApplication -ApplicationPool $ApplicationPoolDisplayName -ApplicationPoolAccount $AppPoolManagedAccount.Username -Name $WebApplicationName -url $WebApplicationURL -port $HTTPPort
-DatabaseName $ContentDatabase -HostHeader $hostHeader -AuthenticationProvider (New-SPAuthenticationProvider)) -Scope Script
        #Call the SetObjectCache function, which sets the object cache.
        Write-Progress -Activity "Creating Web Application" -Status "Configuring Object Cache Accounts"
        SetObjectCache
Function ValidateURL($WebApplicationURL)
    #Find out if a web application with the target URL exists
    if(get-spwebapplication $WebApplicationURL -ErrorAction SilentlyContinue)
        #If a web application with the specifid URL already exists, wait 5 seconds and exit
        Write-Progress -Activity "Creating Web Application" -Status "Aborting Process Due To URL Conflict"
        Write-Host "Aborting: Web Application $WebApplicationURL Already Exists" -ForegroundColor Red
        sleep 5
        #Setting the CriticalError value to $True results in the script to not create anything
        Set-Variable -Name CriticalError -Value $True
    #If the WebApplicationURL passed is not already a SharePoint web application, find out if it starts with HTTP or HTTPS
    elseif($WebApplicationURL.StartsWith("http://"))
            #If the string starts with http://, and not https://, trim the protocol from the URL. Set the host as the host header
            Set-Variable HostHeader -Value ($WebApplicationURL.Substring(7)) -Scope Script
            #If we're using HTTP, use port 80
            Set-Variable -Name HTTPPort -Value "80" -Scope Script
        elseif($WebApplicationURL.StartsWith("https://"))
            #If the string starts with https://, and not http://, trim the protocol from the URL. Set the host as the host header
            Set-Variable HostHeader -Value ($WebApplicationURL.Substring(8)) -Scope Script
            #If we're using HTTPS, use port 443
            Set-Variable -Name HTTPPort -Value "443" -Scope Script
Function ValidateAppPool($AppPoolName, $WebApplicationURL)
    #Change the ErrorActionPreference to SilentlyContinue while preserving the original value in a temporary variable
    #Failing to do this will result in error messages being displayed if Get-WebAppPoolState does not return an object. The script would still continue
    $CurrentErrorActionPreference = $ErrorActionPreference
    $ErrorActionPreference = "SilentlyContinue"
    #Check to see if an application pool with the name passed by the AppPoolName variable already exists, assign this to a variable.
    #This variable will be used in order to determine if the application pool exists, but is not part of SharePoint
    $TestAppPool = Get-WebAppPoolState $AppPoolName
    #If we have a SharePoint application pool with the value passed by the AppPoolName variable, find out if there are any sites using that app pool
    #This changes the syntax used with New-SPWebApplication
    if(Get-SPServiceApplicationPool $AppPoolName)
        #Return all application pools used by all web applications
        $AppPools = Get-SPWebApplication | select ApplicationPool
        #Providing there is more than one application pool, find out what their names are
        if($AppPools)
            foreach($Pool in $AppPools)
                #Get The application pool display name for each application pool returned
                [Array]$Poolchild = $Poolchild += ($Pool.ApplicationPool.DisplayName)
                #If any application pool matches the value passed by ApplicationPoolDisplayName, set AppPoolUsed to True
                #This is referenced in the CreateClaimsWebApp function
                if($Poolchild.Contains($ApplicationPoolDisplayName))
                    Set-Variable -Name AppPoolUsed -Value $True -Scope Script
                #If the application pool display name does not match the value passed by ApplicationPoolDisplayName, set AppPoolUsed to False
                #This is referenced in the CreateClaimsWebApp function
                else
                    Set-Variable -Name AppPoolUsed -Value $False -Scope Script
        #Since this is a SharePoint Application Pool, set the AppPool value to the the SPServiceApplicationPool object returned
        Set-Variable -Name AppPool -Value (Get-SPServiceApplicationPool $AppPoolName) -scope Script
        #Set the AppPoolManagedAccount variable to the name of the managed acount used by the application pool returned
        #AppPoolManagedAccount is used in the CreateClaimsWebApp function if the application pool does not have existing web applications that are using it
        Set-Variable -Name AppPoolManagedAccount -Value (Get-SPManagedAccount | ? {$_.username -eq ($AppPool.ProcessAccountName)}) -scope Script
    #Check to see if the application pool is in IIS, but is not a SharePoint app pool
    elseif($TestAppPool)
        #If the application pool exists in IIS and is not a SharePoint application pool, abort the script by setting CriticalError to True
        Write-Host "Aborting: Application Pool $AppPoolName already exists on the server and is not a SharePoint Application Pool `n`rWeb Application `"$WebApplicationURL`" will not be created" -ForegroundColor
Red
        Set-Variable -Name CriticalError -Value $True
    #If it's not a SharePoint app pool, and it doesn't exist in IIS, we have to create one
    elseif(!($TestAppPool))
        #Find out if a managed account exists by calling the ValidateManagedAccount function
        validateManagedAccount $ApplicationPoolIdentity
        #If the managed account exists, create an application pool using the existing managed account
        if($ManagedAccountExists -eq $True)
            #Set the AppPoolManagedAccount to the identity of the managed acocunt referenced by the ApplicationPoolIdentity variable
            Write-Host "Creating New App Pool using Existing Managed Account"
            Set-Variable -Name AppPoolManagedAccount -Value (Get-SPManagedAccount $ApplicationPoolIdentity | select username) -scope "Script"
            #Create a new SPServiceApplicationPool, assign that to the AppPool variable
            Set-Variable -Name AppPool -Value (New-SPServiceApplicationPool -Name $ApplicationPoolDisplayName -Account $ApplicationPoolIdentity) -scope "Script"
        #If there is no managed account matching the account referenced by the ApplicationPoolIdentity, create it
        else
            #Use the ApplicationPoolIdentity and ApplicationPoolPassword to create a credential object
            #This is necessary when creating a new managed account
            Write-Host "Creating New Managed Account And App Pool"
            $AppPoolCredentials = New-Object System.Management.Automation.PSCredential $ApplicationPoolIdentity, (ConvertTo-SecureString $ApplicationPoolPassword -AsPlainText -Force)
            #Create a new managed account, assign that to the AppPoolManagedAccount variable
            Set-Variable -Name AppPoolManagedAccount -Value (New-SPManagedAccount -Credential $AppPoolCredentials) -scope "Script"
            #Create a new application pool using the new managed account, assign this to the AppPool variable
            Set-Variable -Name AppPool -Value (New-SPServiceApplicationPool -Name $ApplicationPoolDisplayName -Account (get-spmanagedaccount $ApplicationPoolIdentity)) -scope "Script"
    #Return the ErrorActionPreference to the default value
    $ErrorActionPreference = $CurrentErrorActionPreference
Function ValidateManagedAccount($ApplicationPoolIdentity)
    #Find out if the manage account referenced by the AppPoolIdentity already exists
    #If it does, set ManagedAccountExists to True
    if(Get-SPManagedAccount $ApplicationPoolIdentity -ErrorAction SilentlyContinue)
        Set-Variable -Name ManagedAccountExists -Value $True -Scope Script
    #If it does not, set ManagedAccountExists to False
    else
        Set-Variable -Name ManagedAccountExists -Value $False -Scope Script
Function ClearScriptVariables
    #Set the ErrorActionPreference to SilentlyContinue
    #If this is not set, and the script variables referenced have not been set, an error message will be returned. The script would still continue
    $CurrentErrorActionPreference = $ErrorActionPreference
    $ErrorActionPreference = "SilentlyContinue"
    #Remove the CriticalError variable
    Remove-Variable $CriticalError -ErrorAction SilentlyContinue
    $ErrorActionPreference = $CurrentErrorActionPreference
Function SetObjectCache
    #Set object cache user account properties based on the value of the parameters supplied
    $WebApp.Properties["portalsuperuseraccount"] = $PortalSuperUser
    $WebApp.Properties["portalsuperreaderaccount"] = $PortalSuperReader
    #Create a New Policy for the Super User
    $SuperUserPolicy = $WebApp.Policies.Add($PortalSuperUser, "Portal Super User Account")
    #Assign Full Control To the Super User
    $SuperUserPolicy.PolicyRoleBindings.Add($WebApp.PolicyRoles.GetSpecialRole([Microsoft.SharePoint.Administration.SPPolicyRoleType]::FullControl))
    #Create a New Policy for the Super Reader
    $SuperReaderPolicy = $WebApp.Policies.Add($PortalSuperReader, "Portal Super Reader Account")
    #Assign Full Read to the Super Reader
    $SuperReaderPolicy.PolicyRoleBindings.Add($WebApp.PolicyRoles.GetSpecialRole([Microsoft.SharePoint.Administration.SPPolicyRoleType]::FullRead))
    #Commit these changes to the web application
    $WebApp.Update()
#Script
#Call the ClearScriptVariables function to empty out varialbes that should be blank when the script executes.
ClearScriptVariables
#Validate the URL passed by calling the ValidateURL function
Write-Progress -Activity "Creating Web Application" -Status "Validating Web Application URL Variables"
ValidateURL $WebApplicationURL
#Validate the application pool variables by calling the ValidateAppPool function
Write-Progress -Activity "Creating Web Application" -Status "Validating Application Pool Variables"
ValidateAppPool $ApplicationPoolDisplayName $WebApplicationURL
#As long as CriticalError has not been set, create the web application using the variables passed.
if(!($CriticalError))
Write-Progress -Activity "Creating Web Application" -Status "Creating Claims-Based Web Application"
CreateClaimsWebApp $WebApplicationName $WebApplicationURL $ContentDatabase $HTTPPort
error is thrown below:
deployment
S D:\myworkspace\bif> iisreset
ttempting stop...
nternet services successfully stopped
ttempting start...
nternet services successfully restarted
S D:\myworkspace\bif> .\CreateSP2013ClaimsWebApplication.ps1
reating New Managed Account And App Pool
ew-SPWebApplication : "mysrvr:2020/" contains invalid character ':'.
t D:\myworkspace\bif\CreateSP2013ClaimsWebApplication.ps1:68 char:43
         Set-Variable -Name WebApp -Value (New-SPWebApplication
ApplicationPool ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~
   + CategoryInfo
: InvalidData: (Microsoft.Share...PWebApplication:
SPCmdletNewSPWebApplication) [New-SPWebApplication], ArgumentException
   + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPWeb
Application
annot index into a null array.
t D:\myworkspace\bif\CreateSP2013ClaimsWebApplication.ps1:235 char:5
     $WebApp.Properties["portalsuperuseraccount"] = $PortalSuperUser
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   + CategoryInfo
: InvalidOperation: (:) [], RuntimeException
   + FullyQualifiedErrorId : NullArray
cannot index into a null array.
t D:\myworkspace\bif\CreateSP2013ClaimsWebApplication.ps1:236 char:5
     $WebApp.Properties["portalsuperreaderaccount"] = $PortalSuperReader
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   + CategoryInfo
: InvalidOperation: (:) [], RuntimeException
   + FullyQualifiedErrorId : NullArray
ou cannot call a method on a null-valued expression.
t D:\myworkspace\bif\CreateSP2013ClaimsWebApplication.ps1:239 char:5
     $SuperUserPolicy = $WebApp.Policies.Add($PortalSuperUser, "Portal Super
ser ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~
   + CategoryInfo
: InvalidOperation: (:) [], RuntimeException
   + FullyQualifiedErrorId : InvokeMethodOnNull
ou cannot call a method on a null-valued expression.
t D:\myworkspace\bif\CreateSP2013ClaimsWebApplication.ps1:242 char:5
SuperUserPolicy.PolicyRoleBindings.Add($WebApp.PolicyRoles.GetSpecialRole([
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~
   + CategoryInfo
: InvalidOperation: (:) [], RuntimeException
   + FullyQualifiedErrorId : InvokeMethodOnNull
ou cannot call a method on a null-valued expression.
t D:\myworkspace\bif\CreateSP2013ClaimsWebApplication.ps1:245 char:5
     $SuperReaderPolicy = $WebApp.Policies.Add($PortalSuperReader, "Portal
uper ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~
   + CategoryInfo
: InvalidOperation: (:) [], RuntimeException
   + FullyQualifiedErrorId : InvokeMethodOnNull
ou cannot call a method on a null-valued expression.
t D:\myworkspace\bif\CreateSP2013ClaimsWebApplication.ps1:248 char:5
SuperReaderPolicy.PolicyRoleBindings.Add($WebApp.PolicyRoles.GetSpecialRole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~
   + CategoryInfo
: InvalidOperation: (:) [], RuntimeException
   + FullyQualifiedErrorId : InvokeMethodOnNull
ou cannot call a method on a null-valued expression.
t D:\myworkspace\bif\CreateSP2013ClaimsWebApplication.ps1:251 char:5
     $WebApp.Update()
     ~~~~~~~~~~~~~~~~
   + CategoryInfo
: InvalidOperation: (:) [], RuntimeException
   + FullyQualifiedErrorId : InvokeMethodOnNull

Hi Benjamin,
If you're getting a Null Value error anywhere, that means a variable you're referencing isn't set to anything. If you're getting that try echoing out each variable after it's assigned to see if it's set to anything.
The link you are referring is for SharePoint 2010 and verified on Windows Server 2008 R2 and 2008, but not Windows Server 2012.
The approach in this case includes the following per the blog:
Check to see if a web application with the current specified URL is already in use – exit if it is
Check to see if an application pool with the name already exists. If so use it, otherwise create one
Create a web application based on the parameters specified
Assign the object cache properties to the new web application
Create policies for the object cache users to the web application
To simplified the code, we could use powershell below to check if web application and application pool have been already in use ahead. And skip the last two steps in the first time.
Get-SPWebApplication | fl displayname, applicationpool
Please refer to New-SPWebApplication
which is used to create a new web application within the local farm:
http://technet.microsoft.com/en-us/library/ff607931(v=office.15).aspx. Only two parameters i.e. ApplicationPool and Name are required, we could try a simple command at first:
Please run Get-SPManagedAccount to check the managed account, then execute the command below:
$ap = New-SPAuthenticationProvider
New-SPWebApplication -Name "Contoso Internet Site" -Port 2014 -ApplicationPool "ContosoAppPool" -ApplicationPoolAccount (Get-SPManagedAccount "Domain\Administrator")
-AuthenticationProvider $ap -SecureSocketsLayer
Regards,
Rebecca Tu
TechNet Community Support

Error while creating grouspace using spaceswebservice

Hi,
I am using peoplesoft appliation and trying to create new spaces using the spaceswebservice, i am getting the following exception.
Copied from spaces.log:
(9:05:04 AM) madanagopal.damodharan: <Apr 6, 2011 8:28:55 PM PDT> <Warning> <oracle.j2ee.ws.common.jaxws.JAXWSMessages> <BEA-000000> <Exception while executing the business logic: Unexpected Error occurred while performing the method getGroupSpaceMetadataByGuid. Contact system administrator.>
<Apr 6, 2011 8:28:55 PM PDT> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
<Apr 6, 2011 8:28:55 PM PDT> <Error> <oracle.webcenter.spaces.internal.view.ws> <BEA-000000> <
oracle.webcenter.spaces.internal.view.ws.SpacesWebServiceException: User vp1 not authorized to perform the operation createGroupSpace.
     at oracle.webcenter.spaces.internal.view.ws.SpacesWebService.createGroupSpace(SpacesWebService.java:749)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
I checked the user vp1 exists in OID. I use OIDAuthenticator as provider. Any roles/permission is missing for that user to create groupspaces? It was working finr when we used before. But of late, we are getting into this error.
Thanks,
Madan.

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Error when creating decision table

Hi,
I am on a Netweaver 7.0 EHP2 SP 6.
Using the BRF+ Workbench I created two applications and some other objects, but when trying to create a decision table in one of the applications I am getting a shortdump after confirming the popup where you can enter the name of the decision table. It works fine in the other appliation though.
The error message is
Runtime Error: CREATE_DATA_UNKNOWN_TYPE
The specified type FDT_EXPR_0247a is no valid data type.
Termination occured in the ABAP program "CL_FDT_PERSISTENCE=================CP" - in "IF_FDT_PERSISTENCE~WRITE"
And of course more. I just wanted to ask if this is a known error, since I only used the Workbench, and didnt change anything standard.
Regards,
Peter Büermann

Table should be there. I do not understand why this is not the case in your system. Have there been any problems in the upgrade?
Two options.
1. Create a message for SAP to look at this.
2. Maybe implement SP7. You may be lucky and the table is in it.

Problem while Deploying WebDynpro application-error:java.rmi.RemoteExceptio

Hi All,
i installed WAS 6.40 sp 16 on my system its working fine. I can able to log in to the SDM as remoteGUI.bat using my sdm password.But while deploying the webdynpro appliation i am getting error like "java.rmi.RemoteException: Only Administrators have the right to perform this operation".
Using my administrator PWD i can log in to all the systems like Useradmin, SDM, J2E engine.
can any one help me....thanks in advance

hi all
i also had the same problem, i am able to log into SDM GUI through Remotegui.bat
but even though i had changed the password i am not able to deploy the applicaton to j2ee sever, through the NWDS. I tried deploying the applicaton in the
GUI of SDM there also it is giving like "Only Administrators have the right to perform this operation".
How to go to User Administration and where?is it in OS level or in Web AS Admin console?
Adding user admin (default password is also admin) to the Administrators group,
Go to: User Administration --> Groups and search for Administrators.
Then add user with ID admin in this group

Error to delete the cube

Hi All,
Iam in ASo using 11.1.1.2v I am not able to delete the cube its saying eror 1054002 :loading application is not permitted i deleted in app folder but in EAS its not delting i tried with maxl also but its not delting this is happne bcoz of
i changed admin password and i re created partition then its not showing anything again reset the password to"passord" then i am not able to see the data in the cube so i want to delete that cube but its giving error

I hope, u have deleted the application from back end.... and not able to delete the same from Console.. Is it ?
I think, u need to refresh the Appliation list or disconnect the Ananltycal server and then connect it again, hope it will disapperar.;;;;;;
Regards
Cnee

XML Deserialization error while consuming Enterprise service in wd java..

Hello,
I am trying to build 2 webdynpro java webdynpro applications which consumes enterprise service for purchase order and another application for Busines partner.
While i was able to successfully consume the PO service in webdynpro java and get the desired output for PO..i get XML Deserialization error while running appliation for Business Partner..
These are the details/steps i followed for the Business Partner application:
1. After creating the model using the enterprise service, i created a service controller from the model to the component controller..
2. Out of many inputs/output attributes during mapping from model to component controller. i further mapped the context from CC to ViewC.
3. In the wdDoInit() method, i added the follwing code:
    BPCreate model1 = new BPCreate();
    Request_BusinessPartnerERPCreateRequestConfirmation_In RequestC = new Request_BusinessPartnerERPCreateRequestConfirmation_In(model1);
    BPERPCrteReqMsg_S CreateMessage = new BPERPCrteReqMsg_S(model1);
    BPERPCrteReq_SBP Cpartner = new BPERPCrteReq_SBP(model1);
String Category = new String();
    String lf = new String();
    Cpartner.setInternalID(new String());
    Cpartner.setNumberRangeIntervalBusinessPartnerGroupCode(new String());
    Cpartner.setLifeCycleStatusCode(lf);
    Cpartner.setCategoryCode(Category);
    CreateMessage.setBusinessPartner(Cpartner);
    RequestC.setBusinessPartnerERPCreateRequestMessage_Sync(CreateMessage);
    wdContext.nodeBusinessPartnerERPCreateRequestMessage_Sync().bind(CreateMessage);
4. When i comment this code and run the application, the aplication comes up but the input fields are non-editable..
5. If i place this code in wdDoInit() method, i get the Deserialization error..
Any idea about why this error occurs and which areas in the application can lead to these errors?
I checked that the service runs fine in soamanager.
Thanks, JVR

Hi Kishore,
This error is majorly because while executing this Webdynpro application you are not entering all the mandatory fileds of WS.
Please try to execute this WS from WS-Navigator, check which fileds are mandatory and then
appropriately instantiate it in wdDoInit and pass all the fields required.
Regards,
Vaibhav Modi.

Error ASPRUNTIME: Object reference not set to an instance of an object.in Visual Studio in method CopyPrecompiledFile.

Hello, I have this issue and Ihave wasted atleast 2 days with this one. I have tried all possible solutions -
1. Turn Off Real time McAffee scanning -- I do not have real time scanning ON
2. Delete Bin folder and start all over by adding references -- Did not work
3. delete .compiles or refresh filesdelete temp files from asp.net temp files folder -- no .Compiled file. Deleted refresh files but no use
4. change temp file for appliation in compilation tag of web config -- No use
My application framework is .NET 4.5 and VSD 2012. I have tried to compile from C:\WINDOWS\Mi
crosoft.NET\Framework folder as well as C:\WINDOWS\Mi
crosoft.NET\Framework64 folder. Both gave same error.
I need urgent assistance plz.
Here is stack trace :
C:\Development\Convergence\Applications\CAP\WixSetup\WixSetupView>"C:\WINDOWS\Mi
crosoft.NET\Framework\v4.0.30319\aspnet_compiler.exe" -u -fixedNames -p "C:\Deve
lopment\Convergence\Applications\CAP\TouchPointTier\Presentations" -v / "C:\Deve
lopment\Convergence\Applications\CAP\PrecompiledWeb\ConvergenceCAP" -errorstack
Microsoft (R) ASP.NET Compilation Tool version 4.0.30319.17929
Utility to precompile an ASP.NET application
Copyright (C) Microsoft Corporation. All rights reserved.
error ASPRUNTIME: Object reference not set to an instance of an object.
[NullReferenceException]: Object reference not set to an instance of an object.
at System.Web.Compilation.BuildManager.CopyPrecompiledFile(VirtualFile vfile,
String destPhysicalPath)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.PrecompileAppInternal(VirtualPath star
tingVirtualDir, IEnumerable`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManager.PrecompileApp(VirtualPath startingVirt
ualDir, IEnumerable`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManager.PrecompileApp(ClientBuildManagerCallba
ck callback, IEnumerable`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManagerHost.PrecompileApp(ClientBuildManagerCa
llback callback, List`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManagerHost.PrecompileApp(ClientBuildManagerCa
llback callback, List`1 excludedVirtualPaths)
at System.Web.Compilation.ClientBuildManager.PrecompileApplication(ClientBuil
dManagerCallback callback, Boolean forceCleanBuild)
at System.Web.Compilation.ClientBuildManager.PrecompileApplication(ClientBuil
dManagerCallback callback)
at System.Web.Compilation.Precompiler.Main(String[] args)
C:\Development\Convergence\Applications\CAP\WixSetup\WixSetupView>pause
Press any key to continue . . .

I know these warning are not related to my issue that is the reason i am not able to understand what is wrong with it. Its a huge application and compiliing takes atleast 6-7 hrs and after that I get error in "copyPrecompiledFiles" method.
I have circular reference issue in application but when I build application in specific sequece, it goes away so after builing application with 0 errors, i execute command to precompile
rmdir C:\Precompiled /s /q
mkdir C:\Precompiled
"C:\WINDOWS\Microsoft.NET\Framework64\v4.0.30319\aspnet_compiler.exe" -u -fixedNames -p "C:\ApplicationPath" -v / "C:\Precompiled" -errorstack
pause

Error 500 when trying to access Admingui in Sun Application Server 8.2

Hello there
I�m evaluating Sun Communication Suite 5, and one of the components installaed is the Sun JAS 8.2. When i try to access the admin console on the port 4849, it shows me the login page, and when i insert the username and pass the server answers me with this "beautiful" error page:
[#|2008-06-28T09:46:48.629+0200|SEVERE|sun-appserver-ee8.2|javax.enterprise.system.container.web|_ThreadID=30;|StandardWrapperValve[AdminGUIServlet]: Asignar excepci��n para el servlet AdminGUIServlet
javax.servlet.ServletException: Error al asignar una instancia de servlet
at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:760)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:177)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:235)
at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2114)
----- Root Cause -----
java.lang.NoClassDefFoundError: com/iplanet/jato/ApplicationServletBase
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1807)
at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:914)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1379)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1243)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1807)
at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:914)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1379)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1243)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1807)
at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:914)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1379)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1243)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1033)
at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:756)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:177)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:235)
at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2114)
I have revised the java path, the jato.jar existence in the WEB-INF/lib and i�m out of ideas. Any clue?. Other applications like the Access Manager works seamlessly.
Best Regards.

I have observed the same error (java.lang.NoClassDefFoundError: com/iplanet/jato/ApplicationServletBase)
during the Java Enterprise System installation on Fedora 9 and resolved it.
when you install an Appliation Server as part of JavaES,
it looks for some resources (jato.jar,cc.jar,dtd,gif...)
to the path configured by webconsole. for example it is
looking for jato.jar to /opt/sun/share/lib/jato
[root@localhost sun]# find | grep jato.jar
./identity/lib/identity/console-war/WEB-INF/lib/jato.jar
./identity/web-src/services/WEB-INF/lib/jato.jar
./identity/web-src/password/WEB-INF/lib/jato.jar
./webserver7/lib/webapps/admingui/WEB-INF/lib/jato.jar
./share/lib/jato.jar
./webconsole/private/templates/sjsas/jato_jar.reg
./webconsole/private/templates/tomcat/jato_jar.reg
./private/share/lib/jato.jar
./appserver/lib/install/applications/ee/admingui/adminGUI_war/WEB-INF/lib/jato.jar (this is a link)
./appserver/lib/install/applications/admingui/adminGUI_war/WEB-INF/lib/jato.jar
cd /opt/sun/appserver/lib/install/applications/ee/admingui/adminGUI_war/WEB-INF/lib/;ls -l
cc_de.jar -> /usr/share/webconsole/lib/cc_de.jar
cc_es.jar -> /usr/share/webconsole/lib/cc_es.jar
cc_fr.jar -> /usr/share/webconsole/lib/cc_fr.jar
cc_ja.jar -> /usr/share/webconsole/lib/cc_ja.jar
cc.jar -> /usr/share/webconsole/lib/cc.jar
cc_ko.jar -> /usr/share/webconsole/lib/cc_ko.jar
cc_zh_CN.jar -> /usr/share/webconsole/lib/cc_zh_CN.jar
cc_zh_TW.jar -> /usr/share/webconsole/lib/cc_zh_TW.jar
jato.jar -> /usr/share/lib/jato/jato.jar
My Steps to fail:
for uninstall purpose I had made
rpm -qa | grep sun (but not for SUN)
and removed the searched RPMs.
I had not made search for "rpm -qa | grep SUN" that take a look to RPMs related with webconsole.
Later I removed /opt/sun/, /var/opt/sun, /etc/opt/sun directories.
At the next JavaES installation the webconsole has not been installed
as there were a conflicts with the already installed RPMs and I have
missed this point. So the needed /opt/sun/webconsole path is absent now.
Despite of the mentioned above I have manually corrected the link
to the corrupted paths and copied the needed jars from other products
("identity management") which comes with JavaES, and was able to login to
https:localhost:4849 with admin admiadmin successfully
At the end of all
I have made a search for rpm -qa|grep sun and rpm -qa|grep SUN
and removed the related RPMs and the mentioned above folders
and reinstall a fresh JavaES. It works fine now.
Regards,
Telman

Hard Drive damaged, error trying to Transfer Activation for CS2

The hard drive on my laptop is performing erratically and CHKDSK can't fix it, so it's time for a new drive. In preparation for the new drive, I tried to transfer activation of Photoshop CS2. I get the following error dialogue box message:
"The application or DLL C:\Program Files\Adobe\Adobe Photoshop CS2\Activation\en_US\almuirsc.dll is not a valid Windows image. Please check this against your installation diskette."
The only choice for this box is to click the OK button. When I do, I get the following message:
"Sorry, a serious error has been detected. To continue using Adobe Photoshop, please reinstall the appliation."
Any thoughts on what to do? Perhaps try re-installing and hoping that I can then use the Transfer Activation feature properly?

I wouldn't even worry about it. Get the new drive, install CS2 and try
to activate it. If it's denied call Adobe and explain the crashed drive.
They'll get you running again.
Bob

ACCUWEATHER appliation error

Similar Messages

Maybe you are looking for