ACE 4710 - need help configuring backend server monitoring

Currently running an ACE 4710, which is handling all of our inbound SSL connections and then forwarding requests thru
to backend web servers. This all works fine.
My question is this..Right now we are not load balancing any of the backen web servers. But I now have a requirement that should
a web server crash or become unavailable I need to redirect that backend connection to another web server.
Scenario is more like I have 2 web servers both serving same content, but I want one server to take all the connections unless it fails, at that point
have all the connections forwarded to 2nd server.
Is there a way to setup the load balancing where the 1st server gets all the connections until a failure happens ?
Any help would be appreciated.
Cheers
Dave

Hi Dave,
You can use sorry-server or backup server feature. details can be found at
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/slb/guide/rsfarms.html#wp1000264

Similar Messages

I need help with Mavericks Server: an error occurred while configuring your server. I

I need help with Mavricks Server, I get the following: an error occurred while configuring your server. I have deleted the Server.app several times along with the associated com.apple and Server folder. Any more help would be appreciated.

There are usually some log files around, related to the installation. See if Console.app (Applications > Utilities) shows anything relevant to the error, when you've done a fresh install of Server.app and tried the configuration.

Need help startng websphere server in eclipse for debugging porpose

I am using Eclipse Sdk Version: 3.1.2
IBM websphere 6.0
JDK 1.4
I set debug value to "true" in my application.xml
I have a .ear file of my application deployed on the websphere appserver. Currently I can test my application in nobebug mode.
values of environment variables are -
JAVA_HOME - C:\DEV\IBMJDK142; C:\Program Files\Java\jre1.6.0_03
PATH - C:\DEV\IBMJDK142\bin; C:\Program Files\IBM\WebSphere MQ\Java\lib;C:\DEV\IBMJDK142\bin;%SystemRoot%\system32;%SystemRoot%;
I want to test the application in debug mode.
I am using default server on websphere, which is server1.
In Admin-console of webshere I went to
server-->Application server-->choose server1-->Debugging Service ---->checked the checkbox "Enable service at server startup"
Here value of my JVM debug port is 7777.
next In Eclipse env I chose Run---->Debug....--->Remote Java Application ----> created a new application with the name of my application and set the connection properties to -
Host - localhost
port-7777
Eclipse----> Windows----->Preferences---->Server----->Installed Runtime---->Add---->selected values such as -
JRE - default JRE(JDK 1.4)
IBM Websphere Installation Directory - C:/DEV/WebSphere/AppServer
saved it.
Now in debug perspective, I created a new server with selection/values such as -
IBM--->IBM Websphere v6---->
port - 9081
server profile directory - C:/DEV/WebSphere/AppServer/profiles/default
cell - GCWSNTRANode01Cell
node - GCWSNTRANode01
server - server1
Next---->Added the project to configured project ----->FINISH
Closed Eclipse to save env settings.
Started the default server (server1)
opened eclipse - desired project--->debug perspective ---->choose server--->Right Click----Start/Debug
mesg "Starting ServerI BM Websphere 6 - IBM Websphere 6 failed to start"
can some one please tell me what I am missing here.

Need help startng websphere server in eclipse for debugging porpose
can some one please tell me what I am missing here. Well for one, you're trying to debug a dolphin
Edited by: redfalconf35 on Jun 19, 2008 4:50 PM

Need help configuring Excel Services

I've configured both the Excel Serives and Secure Store Target applications and continually receive the following error message when trying to view the Simple Projects List sample report:
An error occurred while accessing application id ProjectServerApplication from Secure Store Service. The following connections failed to refresh:
Project Server - Simple Projects List
The Server Logs show the following errors:
Access Denied: Claims stored in the credentials did not match with the group claim for a group app.
The Microsoft Secure Store Services application Secure Store Service failed to retrieve credentials. The error returned was 'Access Denied.' ...
Access is denied. (Fault Detail is equal to Microsoft.Office.SecureStoreService.Server.SecureStoreServiceFault)
SSS has failed with the following exception: Access is denied.
Unable to esablish a connection using credentials retrieved from SSS. This could be because the Unattended Service Account is not configured or because the credentials retrieved from SSS are not valid.
I've repeated the steps to create these configurations a few times, and continue to get the same errors. Any help would be appreciated!
Thanks

Hello,
I need help setting up excel services.
Excel service is already running on sharepoint server.
I have one reporting file which is generated by DBA with database connection. i want to upload that file under document library and i want whenever user open it through document library, it gets updated through database connection
This is my first time, so pls guide me
Reporting file has authentication set to --> None
Do i require any specific settings for authentication? like unattended account ? which username should i use
Connection String -->
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=True;User ID=ExcelServices;Initial Catalog=SurveyData;Data Source=jdb1;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RSTKW7W-06709;Use Encryption for Data=False;Tag
with column collation when possible=False
http://../training/sptestsite/Medication_Audit_Report
http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
Trusted File Location - is this place do i need to upload that reporting file?
Trusted Data Connection Libraries - is this place do i need to save connection file .odc ?
If i am not wrong, should i put
Trusted File Location = http://../training/sptestsite/Medication_Audit_Report
Trusted Data Connection Libraries = http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
http://../training/sptestsite/Medication_Audit_Report -- Here only reporting file will be uploaded right?
http://../training/sptestsite/Medication_Audit_Data_Connection_Library/ -- Here only database connection .odc file will be uploaded?
what other settings are required. please correct me
my email address - [email protected]
Harsh

I need help configuring three products: WRVS4400N, WAG325N and WVC200

Hello,
I want your help in three linksys products as mentioned below:
WAG325N ADSL2+ Router
WVC200 PTZ CAMERA
WRVS4400N VPN Router
The computer connections and configuration of above linksys products which I am working with and which are connected with the above three linksys products at present are as follows:
1) I have one server and one laptop.
2) Laptop has two wireless adapters which I use to connect to the routers.
3) The server is connected to the WRVS4400N Router through one of the four ethernet ports mentioned on backside of the WRVS4400N Router. The DHCP of this router is disabled by me and the router's default IP 192.168.1.1 was changed to 192.168.1.12
4) The WRVS4400N router is connected to the Wag325N router for internet access to the server and server is connected to WRVS4400N Router as mentioned in point number 3 above.
5) The WAG325N router is setup as per the instructions mentioned that came with the CD of this router. The only change that I have modified is the router's default IP. I have changed the default IP of WAG325N from 192.168.1.1 to 192.168.1.13 and DHCP is enabled on this router.
The help that I want is step by step as follows:
1) I want to configure the both routers in such a way so that I can access them from anywhere across the world i.e. remotely using internet.
2) I have WVC200 Camera which I setup according to instructions mentioned in the CD and also configured the DDNS service. But when the " RJ45 Cable is connected " to my WAG325N router and Camera, then only the camera works properly. What I want is that after the setup is completed, I want to remove the RJ45 Cable connected from my camera to router and use the camera wirelessly from any location within the range of my above mentioned WAG325N router. I need flexibility to use my camera without cable connections from any location and any rooms of my house. I also configured the port forwarding and DDNS properly. The only problem is that if I remove the Cable after the setup of camera is finished, then the camera access is not working on LAN or internet(through DDNS). Whereas the same works on LAN and internet using the DDNS service, when the cable is physically connected to the WAG325N router. Also I want one more thing additionally other then this. I want to use this camera wirelessly by configuring the port forwarding options on both routers at a same time(i.e. simultaneously at once on WRVS4400N and WAG325N).
3) Now as two DHCP cannot work at a same time and as my routers are connected with each other, So I have disabled the DHCP on WRVS4400N. Here I need help so that DHCP can be enabled on both at a same time. Because if the DHCP is not enabled on WRVS4400N then I have to give IP to the server which is connected with server. If I enable the DHCP then there are two DHCP's at a same time on same network and thus problems occurs in internet access to the server. So, what should I do in such a way so that I do not have to give any IP to my server and set it to automatic.
4) This question is just for my knowledge so that I can use the above mentioned linksys purchases upto full extent possible in future. I want to know what is VPN and how is it usefull? What is the difference between VPN and VPN tunnel? How can VPN be used to access all my network resources connected with my server in the above situation where my server is connected to WRVS4400N which in turn is connected to WAG325N?
Thanks !
Sincerely
Kalpesh Sharma
+91-79-25351208
+919227435453
Ahmedabad, India.

for question number 1:
you said that your main router is WAG325N, for you to remotely access the 2nd router is for you to forward the IP addr [192.168.1.12] on your first router and change its management port of your second router that is located on either the security tab or the administration tab on its User Interface
to access your first router open and Internet Explorer and enter
http://[public IP addr]:[management port]
the PUBLIC IP or INTERNET IP is located on the status page of your router
to access your second router just change the management port to
ex.
http://66.77.88.99:8080 first router
http://66.77.88.99:8081 second router
for question number 2:
make sure that you have configured all wireless settings on both your camera and your main router WAG235N, once done save settings and power down your camera and power it back up.
for question number 3:
for you to enable DHCP on both routers your connection can go like so...
from a regular port of your main router going to the INTERNET port of your second router [this way you can enable DHCP on both routers]. INTERNET is no problem, your cesond router will be able to get connection
for question number 4:
VPN - Virtual Private Network
VPN tunnel -is/are connections from router to router [gateway to gateway]
VPN is used to connect a diff network on a diff location for you to have access to the shared filed [it is like a file sharing through the internet]
for you to be able to use VPN tunnel you have to connect to a different VPN router on a diff location. In that way you can get access to the other network

Need help configuring Attribute Change in WLS 6.1

Hi there,
I did all it said in the documentation, lacking any sight of an SNMP
trap. I want to receive a SNMP trap if the
InvalidLoginAttemptsTotalCount changes (MBean: ServerSecurityRuntime).
I use
Attribute MBean Type: ServerSecurityRuntime
Attribute MBean Name:
petstore:Location=petstoreServer,Name=petstoreServer,Type=ServerSecurityRuntime
Attribute Name: InvalidLoginAttemptsTotalCount
I enabled SNMP, configure my TrapHost and started my trapdaemon. But I
don't get any trap even though I increased the counter by doing some
logins with the wrong password. Parallel to my attribute change I also
configured a counter monitor on the same attribute, with the same
disappointing result =:-(
Can anyone help ?
Greetings,
Alex

You need to set a target for the pool. Without target
pool service won't start. Also you need to provide
initial and maximum size for the pool.
Regards,
Slava Imeshev
"Nadeem" <[email protected]> wrote in message
news:3d6d9268$[email protected]..
>
Hi Slava, thanks for the reply. Here is the connection pool definition asextracted
from config.xml. Do you see any errors in this which would cause theexception
mentioned below?
-Nadeem
************* Connection Pool element in config.xml ********
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
Name="MyJDBC Connection Pool"
Properties="user=system;password=manager" TestTableName="cabin"URL="192.168.0.11:1521:tacit"/>
"Slava Imeshev" <[email protected]> wrote:
Hi Nadeem,
Could you show us the connection pool definition?
It can be extracted from config.xml
Regards,
Slava Imeshev
"Nadeem" <[email protected]> wrote in message
news:[email protected]..
Hi,
I need to create a connection pool in WLS 7. Here are the specificsof my
environment:
1. RDBMS: Oracle 8i
2. Driver I want to use: Oracle thin 8.17 (provided with WLS 7)
3. IP address of machine on which database resides: 192.168.0.5
4. Port number: 1521
5. Name of database: MyDB
6. user: scott
7. password: tiger
Given the above,I do not know exactly what to fill out in the
following
fields
that appear in the Admin Console's connection pool creation form:
1. Name of connection pool (OK, this one I know!)
2. URL string (exactly what should it be, given above info?)
3. Driver Classname (I want to use Oracle thin 8.17, so what shouldI fill
here?)
4. Properties (exactly what should I fill here, given above info?)
5. ACL Name (completely stumped here! Documentation says ACLs havebeen
replaced
by policies in WLS 7 - so what to fill here?)
Could someone please help me correctly fill out these fields usingthe
information
I provided in the first paragraph.
BTW, I'm logged into WLS as Administrator.
Much obliged,
Nadeem

Need help on content server conversioning formats

Hi,
I need a help on content server. My requirement is to convert PDF to HTML how can i achieve that wether by using IBR or by Dynamic converter and explain how to do this ?
Srinath am fallowing you in the forum hope you can help in this...
Thanks,
DSV

Hi
Dynamic converter is the component that will be used to do the conversion from any format to HTML . So you will have to install the following to get this working :
1. UCM Core Update patchset 6907073 which is build 74 (latest to be released)
2. Dynamic Converter version 8.2.0.862 - This will be available in the above patchset .
3. ContentAccess specific to your OS . This is from patchset 6899823 .
After installing the above 3 component , restarting UCM should get the DC up and working . Then you would need to set pdf as a format to be converted to HTML (from configuration for DC admin) and it should start working fine .
Hope it helps .
Thanks
Srinath

Newbie in need assistance configuring iChat server (LDAP).

I needs some assistance in setting up iChat server for our office. I running LDAP and I have the iChat server basics setup and it is working, however my boss wants to set up different domains in iChat for the various departments (i. e. Accounting, Sales, production, etc.). These will not be accessed outside of the building. He states I need to configure additional search bases. It is at this point I am drawing a blank.

Hi Paul,
An intersetng one.
James Weston may be able to post more on this.
iChat can Chat to other Macs using the Bonjour option
(Click the Apple/Command key + 2 together)
Bonjour has to be enabled in the Account section of iChat Preferences.
All computers have to be in the same subnet
This is going to be the sticking point.
Lets say you have one routing device for your local net and it issues all computers and devices with IP Addresses in the range 192.168.1.xxx then all the computers on on the same Subnet as there is only one LAN.
If you have subsequent routers that change the IP addresses to somethng like 192.168.1.xxx for sales and 192.168.2.xxx fo accounts etc, then you will have subnets. Computers in 192.168.1.xxx will only see other Bonjour/iChat computers in that group and the same for 192.168.2.xxx but not from group to group.
To show up in the Bonjour window iChat takes the Address Book Me card entry of the MAc user account and broadcasts it to the other computers.
This would give you an option of using this method to pass out information where people were. The revelant "Sales" or "Accuounts" could be added to their Real Names.
(Bonjour would have problems if several computers were changed to read just Sales as the Address Book name).
An alternative would be to set up a VPN and have all computers on the same network for Bonjour independent of any of network they were on.
James knows more about networks than I do and may have other information that may help.
Ralph

I need help configuring a connection with asdm 5.2 for asa

Hi All
I am very much a novice with asdm 5.2 for asa and I urgently need to configure a connection but don’t know how to. I have 2 domains at work and someone is trying to connect their sql client from their pc in one domain to the sql server in the other domain (DMZ).
When he tries to connect he gets the error
Cant connect to MySql Server at "IP Address" (10060)
He is trying to connect on port 3306. Could anyone please give me any tips on how i can resolve this quickly? I know i am
trying a shortcut on this one but I recently started a new job and thrown in the deep end here and need to learn this asdm 5.2 for asa product from scratch with nothing more than the manual that come with the cd . My Cisco knowledge is from 2001 when i did half of a ccna course.
Any help would be greatly appreciated

Hi,
I'm not a security specialist but here is how I had it set up at home:
Essentially a NAT and a rule forwarding the port are needed. In this particular case I had an Oracle server running and a person requested remote access. So, for example, the source address was his external IP and the destination was the Oracle's external IP. For the NAT the source was the internal IP of the Oracle server and the interface was Outside.
Hope this points you in the right direction.

ACE 4710 Connectivity help?

I'm using an ACE 4710 in a new datacenter, with the following setup:
2/4 physical ethernet interfaces port channeled into port-channel 1
2/4 physical ethernet interfaces port channeled into port-channel 2
I have the following vlans defined:
1001 - admin - interface ip: 10.53.136.70
400 - client side - interface ip: 10.53.136.100
500 - server side - interface ip: 192.168.128.1
999 - fault tolerance - interface ip: 192.168.11.2
My problem is I am trying to nat ssh and web server traffic from the client side, to the server side, but it's never getting to the server. For example, if I ssh to 10.53.136.102, it times out. (10.53.136.102 should get nat'd to 192.168.128.2)
Also, I can connect to the ACE 4710 via telnet using 10.53.136.70, but cannot connect to 10.53.136.100.
I'm thinking there is either something wrong with the port-channels, or the access lists. On the other hand there could be something wrong with the nat'ing, but I had it working before switching over to the port-channels.
Any thoughts?
Thanks,
Brent

I've attached the two contexts which we are using. The admin context is new_lb_config.txt and the second context where the loadbalancing occurs is in the new_lb_config_VC_WBPX.txt file.
From the load balancer, I am able to ping the real server ips in the 192.168. ip range. The 4710 recognizes that they are in service.
I believe the ACL for the VLAN 400 is set to permit all traffic, but I don't know if the service policies are preventing something from happening.
Right now, I have disconnected the two 4710s and I am only working on one of them to see if I can get the basic connectivity going. Once I accomplish that, I will work on high availability. I'll have to check whether it thinks it is in passive mode...not entirely sure how to do that, but I will check it out.
Thanks,
Brent

ACE 4710 - Gracefully Shutting Down a Server

Hi,
Recently I had to stop an RServer to allow for software upgrades. I entered a no inservice command in the rserver config and all the connections on the serverfarm disappeared. I thought the no inservice should allow existing connections to finish. Is there another way of taking a server out of service?
We are running on an ACE 4710 version A3(2.5). We offload SSL on the ACE and use sticky connections using cookie insert
Thanks for your help

Hi,
To gracefully shutdown use the "no inservice" on the rserver within the serverfarm rather than on the rserver definition.
HTH
Cathy

Need help configuring VPN on RV120W Router (WiTopia VPN)

Hello Cisco Community,
I need some help configuring a VPN from WiTopia on my RV120W router. I am trying to make it so that if any device connects to the router it can automatically connect to the VPN from WiTopia.
Please note that the VPN plan includes PPTP, L2TP, & IPSEC VPN types.
Is this possible? And if so, how?
Thanks in advance!

Hello,
If WiTopia is providing only client to gateway VPN, where WiTopia is the gateway allowing connections to clients, than you will not be able to configure RV120 to connect to it. RV120 in its VPN configurations cannot be configured to be a client.
The only tunnel where can play the role of the connecting part is IPSec gateway to gateway, when in the IKE policy the Direction type is Initiator and the Exchange mode is Aggressive. And you will need to receive all additional configuration parameters from WiTopia -the Encryption, Authentication Algorithm, PFS, SA lifetime and so on. But this means that WiTopia have to provide gateway to gateway VPN connection.
Regards,
Kremena

Why an separate App Domain is needed to configure App Server in SharePoint2013

Why an separate App Domain is needed to configure App Service Application in SP2013

https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/configure-an-environment-for-apps-for-sharepoint-2013.aspx
SharePoint 2013 Apps have their own, isolated URLs, which are separate from the URLs of the sites where the app is being deployed to and where the app is being used. In order to provide isolation apps should run in their own domain, instead of in the same
domain name as your farm. Using a different domain name for apps helps prevent cross-site scripting between apps and SharePoint sites.
Microsoft recommends that the new domain name should NOT be a subdomain of the domain that hosts the SharePoint Sites. For example, if the SharePoint sites are at matrinescu.com, consider mcatrinescuApps.com instead of app.mcatrinescu.com as the domain name.
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=8&cad=rja&uact=8&ved=0CFcQtwIwBw&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DP1eEBQ0vG3o&ei=_teWU-OeDo-JuASBlYII&usg=AFQjCNErUUIrVTd-hnF-7H0wXINYzW3SBA&bvm=bv.68445247,d.c2E

I need HELP configuring SanOs 203 and syslog server Please!

I have a kiwi syslog server on a windows 2003 server to which i can not get my switches to send messages to it.
can someone please help.
I tried to configure from the cli and from the DUI without any luck.

You say it does not configure or that it does not send messages when it is configured? Can you port a show log info. I do not have Kiwi syslog on my network but do run 3CDaemon with no problems with SAN/OS 2.0.3
Is syslog server ping-able from switch?

I need help installing SQL Server 2012 Express

I am very much an amateur. I got a new machine. The old one had Server 2008 R2 but the recommendation was that I need to move to 2012 Express.
When I moved to the new machine, the mover (LapLink) screwed up the version of 2008 R2. IOW, I now have to go forward and install 2012..
I downloaded all the 64 bit files (5 of them). When I start SQLEXPR_x64_ENU.exe, the process starts and then I'm given the choice of a new install or upgrade. I chose the new install. The process started and I got the following message ...
"Failed to retrieve data for this request.."
There are no hints anyplace as to what this means.
When I click "OK", a new status window pops up and proclaims that something is wrong. Then all activity stops.
I don't know what to do. I can't use either version and I really can't tell you much more to help me.
Eric Johnson

I'm not certain how to send the log material so I'll just cut 'n paste the file named "Summary_Eric-PC_20140921_134001_GlobalRules" If this isn't the right way, please forgive me and suggest what is right. Anyway, here goes ...
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2146233088
Exit facility code:            19
Exit error code:               5376
Exit message:                  Failed to retrieve data for this request.
Start time:                    2014-09-21 13:40:09
End time:                      2014-09-21 13:40:29
Requested action:              RunRules
Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x48BB60BC%400xBB814387&EvtType=0x48BB60BC%400xBB814387
Machine Properties:
Machine name:                  ERIC-PC
Machine processor count:       8
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         c:\851594228c4871a4e88415938631\x64\setup\
Installation edition:          Express
User Input Settings:
ACTION:                        RunRules
CONFIGURATIONFILE:
ENU:                           true
FEATURES:
HELP:                          false
INDICATEPROGRESS:              false
INSTANCENAME:                  <empty>
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
RULES:                         GlobalRules
UIMODE:                        AutoAdvance
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140921_134001\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    Message:
        Failed to retrieve data for this request.
    Data:
      HelpLink.ProdName = Microsoft SQL Server
      HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
      HelpLink.LinkId = 20476
      HelpLink.EvtType = 0x48BB60BC@0xBB814387
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
        at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
    Inner exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
        Message:
                Attempted to perform an unauthorized operation.
        HResult : 0x84bb0001
                FacilityCode : 1211 (4bb)
                ErrorCode : 1 (0001)
        Data:
          WatsonData = HKEY_LOCAL_MACHINE@SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
        Stack:
                at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
                at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapObject(String machineName, RegistryView registryView, String instanceId, String instanceName, String
instanceType, String instanceSuffix, UpgradedInstanceStateEnum instanceState)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapCollectionInHive(String machineName, RegistryView regView, List`1 subKeys)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapCollection()
                at Microsoft.SqlServer.Discovery.Instance.GetData(EnumResult erParent)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
        Inner exception type: System.UnauthorizedAccessException
            Message:
                        Attempted to perform an unauthorized operation.
            Stack:
                        at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)

ACE 4710 - need help configuring backend server monitoring

Similar Messages

Maybe you are looking for