ACE 4710 Web Optimization Licnesing
I currently have a 4710 running the 1Gbps package. We are utilizing Application Acceleration and are comg very close to hitting our 10,000 Web Optimization connection limit. I am trying to find out how to upgrade that.
I see in our license usage an option of ACE-AP-OPT-UP1-K9 but can find no information on this part number. Does anyone know if this is even available and what it brings you connection limit to?
ACE01/Admin# show license usage
License Ins Lic Status Expiry Date Comments
Count
ACE-AP-C-UP1 No - Unused -
ACE-AP-C-UP2 No - Unused -
ACE-AP-C-UP3 No - Unused -
ACE-AP-01-LIC No - Unused -
ACE-AP-01-UP1 No - Unused -
ACE-AP-02-LIC No - Unused -
ACE-AP-02-UP1 No - Unused -
ACE-AP-04-LIC No - Unused -
ACE-AP-04-UP1 No - Unused -
ACE-AP-04-UP2 No - Unused -
ACE-AP-VIRT-5 No - Unused -
ACE-AP-500M-LIC No - Unused -
ACE-AP-VIRT-020 No - Unused -
ACE-AP-C-100-LIC No - Unused -
ACE-AP-C-500-LIC Yes 1 In use never -
ACE-AP-C-500-UP1 No - Unused -
ACE-AP-OPT-50-K9 No - Unused -
ACE-AP-C-1000-LIC No - Unused -
ACE-AP-C-2000-LIC No - Unused -
ACE-AP-OPT-LIC-K9 Yes 1 In use never -
ACE-AP-OPT-UP1-K9 No - Unused -
ACE-AP-SSL-05K-K9 Yes 1 In use never -
ACE-AP-SSL-07K-K9 No - Unused -
ACE-AP-SSL-100-K9 No - Unused -
ACE-AP-SSL-UP1-K9 No - Unused -
ACE-AP-SSLUP-5K-K9 No - Unused -
ACE-AP-VIRT-020-UP No - Unused -
Unfortunately, ACE-AP-OPT-LIC-K9 is not available on ACE4710 and
ACE 4710 cannot handle more than 10,000 concurrent connections..
When you use the ACE to perform a specific set of application
acceleration and optimization functions, and the ACE reaches the
maximum of 10,000 concurrent connections, the appliance stops
accepting any additional concurrent connections until the count
drops below 10,000.
http://www.cisco.com/en/US/partner/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_x/command/reference/optimize.html#wp1048813
Regards,
Yuji
Similar Messages
-
ACE 4710 Application Acceleration Optimization Sample Configuration
Is the sample acceleration/optimization configuration sample in the Cisco 4700 Series Application Control Engine Appliance Application Acceleration and Optimization Configuration Guide Software Version A3(1.0)August 2008 (starting on page 1-7 of document) a valid/recommended configuration sample for acceleration/optimization, or do other Cisco validated design guides exist for the 4710 (acceleration/optimization)?
A great resource is the Solution Reference Network Design guides. Here's a link to the Application Engine design guides.
http://www.cisco.com/en/US/partner/netsol/ns751/networking_solutions_sub_program_home.html
Hope it helps. -
ACE 4710 bundle license backup
Hello,
Is it possible to backup ACE appliance licenses if product is bought as a bundle?
ACE-4710-BAS-SK-K9
Promo Bundle - ACE 4710 HW-1Gbps-1K SSL-100MbpsComp-5VC
Following is mentioned in the ACE documentation:
"If you need to replace the ACE, you can copy and install the license file for the license onto the replacement appliance."
But, when we try to backup licenses, we get following results:
ACE-1/Admin# sh license
ACE-1/Admin# copy licenses disk0:mylicenses.tar
Backing up license... failed: License file not found
ACE-1/Admin# sh license status
Licensed Feature Count
Compression Performance in Mbps 100
Web Optimization Concurrent Conns. 50
SSL transactions per second 1000
Virtualized contexts 5
Module bandwidth in Gbps 1.0
ACE-1/Admin# sh license usage
License Ins Lic Status Expiry Date Comments
Count
ACE-AP-C-UP1 No - Unused -
ACE-AP-C-UP2 No - Unused -
ACE-AP-C-UP3 No - Unused -
ACE-AP-01-LIC No - Unused -
ACE-AP-01-UP1 No - Unused -
ACE-AP-02-LIC No - Unused -
ACE-AP-02-UP1 No - Unused -
ACE-AP-04-LIC No - Unused -
ACE-AP-04-UP1 No - Unused -
ACE-AP-04-UP2 No - Unused -
ACE-AP-VIRT-5 No - Unused -
ACE-AP-500M-LIC No - Unused -
ACE-AP-VIRT-020 No - Unused -
ACE-AP-C-100-LIC No - Unused -
ACE-AP-C-500-LIC No - Unused -
ACE-AP-C-500-UP1 No - Unused -
ACE-AP-OPT-50-K9 No - Unused -
ACE-AP-C-1000-LIC No - Unused -
ACE-AP-C-2000-LIC No - Unused -
ACE-AP-OPT-LIC-K9 No - Unused -
ACE-AP-OPT-UP1-K9 No - Unused -
ACE-AP-SSL-05K-K9 No - Unused -
ACE-AP-SSL-07K-K9 No - Unused -
ACE-AP-SSL-100-K9 No - Unused -
ACE-AP-SSL-UP1-K9 No - Unused -
ACE-AP-SSLUP-5K-K9 No - Unused -
ACE-AP-VIRT-020-UP No - Unused -
I suppose licenses cannot be backuped because they are bundled and delivered with the bundle by default, and not installed...
Does anyone know what would be the procedure for this bundled licenses in case of ACE HW replacement needed?
Best regards,
JasminaHi Jasmina,
License file management is quite simple for ACE. Two methods; save original license email or copy from disk0:.
If you purchased and upgraded license, and followed procedure to generate it, you would have received your license via email. We recommend per documentation (License ordering section) that you:
"Step 5 Save the license key e-mail in a safe place in case you need it in the future (for example, to transfer the license to another ACE). "
Also, to apply, you copy the license file to disk0: on the ACE. This *.lic file resides on disk0: thereafter.
So if you did not happen to save the original email when you obtained the license, and the license has been installed, then you can simply copy the *.lic file off the ACE from disk0: to a safe place. Example copying file from ACE to FTP server:
Switch/Admin# copy disk0: ftp:
Enter source filename]? 1ACE2009060306445454.lic
Enter Address for the ftp server]? 10.2.3.4
Enter the destination filename]? [1ACE2009060306445454.lic]
Enter username]? anonymous
Enter the file transfer mode[bin/ascii]: [bin]
Enable Passive mode[Yes/No]: [Yes]
Password:
Passive mode on.
Hash mark printing on (1024 bytes/hash mark).
Switch/Admin#
Administrator Guide - Licenses on ACE:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA4_1_0/configuration/administration/guide/license.html#wp1010344
Hope this helps.
-pefrench -
Need help to Configure Cisco ACE 4710 Cluster Deployment
Dear Experts,
I'm newbie for Cisco ACE 4710, and still I'm in learning stage. Meanwhile I got chance at my work place to deploy a Cisco ACE 4710 cluster which should load balance the traffic between two Application Servers based on HTTP and HTTPS traffic. So I was looking for good deployment guide in Cisco SBA knowledge base then finall found this guide.
http://www.cisco.com/en/US/docs/solutions/SBA/February2013/Cisco_SBA_DC_AdvancedServer-LoadBalancingDeploymentGuide-Feb2013.pdf
This guide totally fine with my required deployment model. I have same deployment environment as this guide contains with ACE cluster that connects to two Cisco 3750X (Stack) switches. But I have some confusion places in this guide
This guide follow the "One-armed mode" as a deployment method. But when I go through it further I have noticed that they have configured server VLAN as a 10.4.49.0/24 (all servers reside in it) and Client side VIP also in same VLAN which is 10.4.49.100/24 (even NAT pool also).
My confusion is, as I have learned about Cisco ACE 4710 one-armed mode deployment method, it should has two VLAN segments, one for Client side which client request come and hit the VIP and then second one for Server side. which means besically two VLANs. So please be kind enough to go through above document then tell me where is wrong, what shoud I need to do for the best. Please this is an urgent, so need your help quickly.
Thanks....!
-Amal-Dear Kanwal,
I need quick help for you. Following are the Application LB requirements which I received from my clinet side.
Following detail required for configuring Oracle EBS Apps tier on HA:
LBR IP and Name required to configure EBS APPS Tier (i.e, ap1ebs & ap2ebs nodes)
Suggested IP and Name for LBR:
IP : 172.25.45.x [should be on same 172.25.45 subnet of ap1ebs & ap2ebs nodes]
ebiz.xxxx.lk [on port 80 for http protocol accessibility]
This LBR IP & name must be resolve and respond on DNS network
Server Farm detail for LBR Setup
Following detail will be use for configuring the LBR:
LBR IP and Name :
IP : 172.25.45.x [should be on same 172.25.45 subnet of ap1ebs & ap2ebs nodes]
ebiz.xxxx.lk [on port 80 for http protocol accessibility]
This LBR IP & name must be resolve and respond on DNS network
Server Farm Detail for LBR setup:
Server 1 (EBS App1 Node, ap1ebs):
IP : 172.25.45.19
Server Name: ap1ebs.xxxx.lk [ap1ebs hostname is an example, actual hostname will be use]
Protocol: http
Port: 8000
Server 2 (EBS App2 Node, ap2ebs):
IP : 172.25.45.20
Server Name: ap2ebs.xxxx.lk [ap2ebs hostname is an example, actual hostname will be use]
Protocol: http
Port: 8000
Since my client needs to access URL ebiz.xxxx.lk which should be resolved by IP 172.25.45.21 (virtual IP) via http (80) before they deploy the app on the two servers I just ran web service on both servers (Linux) and was trying to access http://172.25.45.21 it was working fine and gave me index.html page. Now after my client has deployed the application then when he tries to access the page http://172.25.45.21 he cannot see his main login page. But still my testing web servers are there on both servers when I type http://172.25.45.21 it will get index.html page, but not my client web login page. What can I do for this ?
Following are my latest config :
probe http Get-Method
description Check to url access /OA_HTML/OAInfo.jsp
interval 10
faildetect 2
passdetect interval 30
request method get url /OA_HTML/OAInfo.jsp
expect status 200 200
probe udp http-8000-iRDMI
description IRDMI (HTTP - 8000)
port 8000
probe http http-probe
description HTTP Probes
interval 10
faildetect 2
passdetect interval 30
passdetect count 2
request method get url /index.html
expect status 200 200
probe https https-probe
description HTTPS traffic
interval 10
faildetect 2
passdetect interval 30
passdetect count 2
ssl version all
request method get url /index.html
probe icmp icmp-probe
description ICMP PROBE FOR TO CHECK ICMP SERVICE
rserver host ebsapp1
description ebsapp1.xxxx.lk
ip address 172.25.45.19
conn-limit max 4000000 min 4000000
probe icmp-probe
probe http-probe
inservice
rserver host ebsapp2
description ebsapp2.xxxx.lk
ip address 172.25.45.20
conn-limit max 4000000 min 4000000
probe icmp-probe
probe http-probe
inservice
serverfarm host ebsppsvrfarm
description ebsapp server farm
failaction purge
predictor response app-req-to-resp samples 4
probe http-probe
probe icmp-probe
inband-health check log 5 reset 500
retcode 404 404 check log 1 reset 3
rserver ebsapp1 80
conn-limit max 4000000 min 4000000
probe icmp-probe
inservice
rserver ebsapp2 80
conn-limit max 4000000 min 4000000
probe icmp-probe
inservice
sticky http-cookie jsessionid HTTP-COOKIE
cookie insert browser-expire
replicate sticky
serverfarm ebsppsvrfarm
class-map type http loadbalance match-any default-compression-exclusion-mime-type
description DM generated classmap for default LB compression exclusion mime types.
2 match http url .*gif
3 match http url .*css
4 match http url .*js
5 match http url .*class
6 match http url .*jar
7 match http url .*cab
8 match http url .*txt
9 match http url .*ps
10 match http url .*vbs
11 match http url .*xsl
12 match http url .*xml
13 match http url .*pdf
14 match http url .*swf
15 match http url .*jpg
16 match http url .*jpeg
17 match http url .*jpe
18 match http url .*png
class-map match-all ebsapp-vip
2 match virtual-address 172.25.45.21 tcp eq www
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
permit
policy-map type loadbalance first-match ebsapp-vip-l7slb
class default-compression-exclusion-mime-type
serverfarm ebsppsvrfarm
class class-default
compress default-method deflate
sticky-serverfarm HTTP-COOKIE
policy-map multi-match int455
class ebsapp-vip
loadbalance vip inservice
loadbalance policy ebsapp-vip-l7slb
loadbalance vip icmp-reply active
nat dynamic 1 vlan 455
interface vlan 455
ip address 172.25.45.36 255.255.255.0
peer ip address 172.25.45.35 255.255.255.0
access-group input ALL
nat-pool 1 172.25.45.22 172.25.45.22 netmask 255.255.255.0 pat
service-policy input remote_mgmt_allow_policy
service-policy input int455
no shutdown
ft interface vlan 999
ip address 10.1.1.1 255.255.255.0
peer ip address 10.1.1.2 255.255.255.0
no shutdown
ft peer 1
heartbeat interval 300
heartbeat count 10
ft-interface vlan 999
ft group 1
peer 1
no preempt
priority 110
associate-context Admin
inservice
ip route 0.0.0.0 0.0.0.0 172.25.45.1
Hope you will reply me soon
Thanks....!
-Amal- -
ACE 4710 and mangled HTTP requests
After replacing a Cisco CSS/SSL Accelorator and PIX firewall with an ACE 4710 to do load balancing and SSL encryption behind an ASA firewall we started seeing mangled HTTP requests in the Apache access logs for the servers in the server farm. Here is one example:
XX.XX.XXX.XXX - - [21/Oct/2012:01:42:12 -0500] "heckoutFlag=true&verifyPassword=false&newsletter=false&emailaddress=&email2=&pass1=&pass2=&username=POST /register/LServlet HTTP/1.1" 501 3322 "https://www.ourwebsite.com/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
Rather than appearing just after the timestamp, the "POST /register/LServlet" is tacked on to header information that shouldn't even appear in the log. Also the first letter in that header information is always missing (heckoutFlag instead of checkoutFlag in this example).
The mangled request always shows up as a 501 HTTP error and shows up late in the Apache access logs (timestamp is out of chronogical order) and always appears with several duplicate POSTs:
XX.XX.XXX.XXX - - [21/Oct/2012:01:42:23 -0500] "POST /register/LServlet HTTP/1.1" 200 8537 "https://www.ourwebsite/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
XX.XX.XXX.XXX - - [21/Oct/2012:01:44:12 -0500] "POST /register/LServlet HTTP/1.1" 200 8537 "https://www.ourwebsite/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
XX.XX.XX.XXX - - [21/Oct/2012:01:42:12 -0500] "heckoutFlag=true&verifyPassword=false&newsletter=false&emailaddress=&email2=&pass1=&pass2=&username=POST /register/LServlet HTTP/1.1" 501 3322 "https://www.ourwebsite.com/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
XX.XX.XXX.XXX - - [21/Oct/2012:01:44:12 -0500] "POST /register/LServlet HTTP/1.1" 200 8537 "https://www.ourwebsite/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
This is occurring for several different URLs and not just the one above and for multiple web browsers.
The ACE load balances to servers running Tomcat 7 with Apache HTTP server v. 2.2.14.
A recent ACE software upgrade to A5(2.1) has not fixed the problem.
Has anyone seen this before?
Thanks for any insight you can provide.
-KariHi Kari,
Do you have a sample of the configuration which you got with the CSS?
What is the current configuration which you got on the ACE?
Can you shows this output: # show stats http?
Jorge -
ACE 4710: Config Allows all traffic except large HTTP downloads
Hi Folks,
Got an ACE 4710 with a basic config that seems to work for all traffic except large downloads.
I've attached the current config
As I mentioned I can do normal HTTP to a standard destination like google or SSH through the ACE or ICMP
If i try to get a large file from the server side of ACE, then a trace shows that the first and subsequent 1460Byte packets dont go through ACE
I've thought of parse lengths, but i cannot see any that seem to affect the generic L4 maps that I am trying to use
Cheers
AlanI've seen a similar fault. I suppose a lower MSS was sent in the TCP SYN handshake packets (1300 or 1380?) and the packets exceeding that value were dropped by the ACE. This is the default behavior which can be switched to a less strict mode by either
exceed-mss allow
or
no normalization
commands.
In our case, a linux web server was whose replies wouldn't keep to the MSS limit. -
ACE 4710 Connectivity help?
I'm using an ACE 4710 in a new datacenter, with the following setup:
2/4 physical ethernet interfaces port channeled into port-channel 1
2/4 physical ethernet interfaces port channeled into port-channel 2
I have the following vlans defined:
1001 - admin - interface ip: 10.53.136.70
400 - client side - interface ip: 10.53.136.100
500 - server side - interface ip: 192.168.128.1
999 - fault tolerance - interface ip: 192.168.11.2
My problem is I am trying to nat ssh and web server traffic from the client side, to the server side, but it's never getting to the server. For example, if I ssh to 10.53.136.102, it times out. (10.53.136.102 should get nat'd to 192.168.128.2)
Also, I can connect to the ACE 4710 via telnet using 10.53.136.70, but cannot connect to 10.53.136.100.
I'm thinking there is either something wrong with the port-channels, or the access lists. On the other hand there could be something wrong with the nat'ing, but I had it working before switching over to the port-channels.
Any thoughts?
Thanks,
BrentI've attached the two contexts which we are using. The admin context is new_lb_config.txt and the second context where the loadbalancing occurs is in the new_lb_config_VC_WBPX.txt file.
From the load balancer, I am able to ping the real server ips in the 192.168. ip range. The 4710 recognizes that they are in service.
I believe the ACL for the VLAN 400 is set to permit all traffic, but I don't know if the service policies are preventing something from happening.
Right now, I have disconnected the two 4710s and I am only working on one of them to see if I can get the basic connectivity going. Once I accomplish that, I will work on high availability. I'll have to check whether it thinks it is in passive mode...not entirely sure how to do that, but I will check it out.
Thanks,
Brent -
Using the ACE 4710 for loadbalancing a Sharepoint site.
We currently have a HTTP probe setup to check the port 80 status of the rserver.
Is there anyway to get the HTTP probe to check a DNS entry for each of the application sites? For instance http://info vs http://site are two different web sites running on the same IP. One site could have a problem but the actual port 80 for the IP may be still alive.
Thanks for any information.Has anyone figure this out? I am tring to get healthchecks/probes setup in this same fashion. I have 2 servers with 1 IP but have many sites. I want to probe each side and ensure I get a 200 code. I also have to provide credentials to the site. It seems that if i open IE I can log in just fine to the site with the credentials. However there is an active x control box that is wanting to be installed. When I set this up on my ACE it seems I am getting a http 401 unauthorized error. I have done a wireshark capture while I was browsing and I see the 401 however it also reports a 200 code after that. Do you think this is a problem because of the active x control wanting to be downloaded? Or is this an issue with the first http code that is recieved by the probe, that being the 401 and then the 200? Below is my config (cleaned of course).
probe http HTTP-80-OUR.DOMAIN.COM
interval 15
passdetect interval 60
credentials
request method get url http://our.domain.com/default.aspx
expect status 200 200
header Host header-value "our.domain.com"
open 1
rserver host SERVER-A
ip address X.X.X.47
inservice
rserver host SERVER-B
ip address X.X.X.48
inservice
serverfarm host FARM-AB
predictor leastconns
probe HTTP-80-OUR.DOMAIN.COM
rserver SERVER-A
inservice
rserver SERVER-B
inservice
ACE4710# show probe HTTP-80-OUR.DOMAIN.COM detail
probe : HTTP-80-OUR.DOMAIN.COM
type : HTTP
state : ACTIVE
description :
port : 80 address : 0.0.0.0 addr type : -
interval : 15 pass intvl : 60 pass count : 3
fail count: 3 recv timeout: 10
http method : GET
http url : http://our.domain.com
conn termination : GRACEFUL
expect offset : 0 , open timeout : 1
expect regex : -
send data : -
------------------ probe results ------------------
associations ip-address port porttype probes failed passed health
------------ ---------------+-----+--------+--------+--------+--------+------
serverfarm : OUR.DOMAIN.COM-10.25.4.12-L3-FARM
real : SERVER-A[0]
X.X.X.47 80 DEFAULT 414 406 8 FAILED
Socket state : CLOSED
No. Passed states : 1 No. Failed states : 2
No. Probes skipped : 0 Last status code : 401
No. Out of Sockets : 0 No. Internal error: 0
Last disconnect err : Received invalid status code
Last probe time : Wed Jun 2 17:44:18 2010
Last fail time : Wed Jun 2 13:37:04 2010
Last active time : Wed Jun 2 13:34:19 2010
real : SERVER-B[0]
X.X.X.48 80 DEFAULT 414 406 8 FAILED
Socket state : CLOSED
No. Passed states : 1 No. Failed states : 2
No. Probes skipped : 0 Last status code : 401
No. Out of Sockets : 0 No. Internal error: 0
Last disconnect err : Received invalid status code
Last probe time : Wed Jun 2 17:44:20 2010
Last fail time : Wed Jun 2 13:37:06 2010
Last active time : Wed Jun 2 13:34:21 2010 -
ACE 4710 - Internet Explorer cannot display the webpage randomly
We have a ACE 4710 with a basic config, (see below).
When clicking on a tab from a window within Interent explorer we occasionally get an issue with it returning: "Internet Explorer cannot display the webpage" The details show "Access is denied" accessing a particular line of a javascript file.
We have put one web server out of service in the farm to make sure that this isn't a result of stickyness not quite working.
We have tested extensively by going directly to the web server directly without the load balancer and cannot reproduce the problem but we can produce the issue within a few minutes when going to the load balanced address.
Thanks in advance for any advice.
HOST-1/Admin# show run
Generating configuration....
logging enable
logging fastpath
logging standby
logging timestamp
logging trap 6
logging history 6
resource-class SLB_ResourceClass_T_R
limit-resource all minimum 10.00 maximum unlimited
resource-class sticky
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-t1k9-mz.A5_1_2.bin
peer hostname HOST-2
hostname HOST-1
interface gigabitEthernet 1/1
switchport access vlan 1000
no shutdown
interface gigabitEthernet 1/2
shutdown
interface gigabitEthernet 1/3
description LB003
switchport access vlan 1
shutdown
interface gigabitEthernet 1/4
description LB004
switchport access vlan 2
shutdown
interface port-channel 1
port-channel load-balance src-dst-port
no shutdown
clock timezone standard GMT
switch-mode
context Admin
description SUTLB01
member SLB_ResourceClass_T_R
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
probe tcp probe_tcp_80
port 80
rserver host Server_S_W301
description Server_S_W301
ip address x.x.32.152
inservice
rserver host Server_S_W302
description Server_S_W302
ip address x.x.32.154
inservice
serverfarm host sfarm_T_R
description sfarm_T_R
predictor leastconns
probe probe_tcp_80
rserver Server_S_W301 80
rserver Server_S_W302 80
inservice
sticky http-cookie Cookie1 T_R_sticky_cookie
cookie insert browser-expire
timeout 3600
serverfarm sfarm_T_R
class-map match-any T_R_L4Class
2 match virtual-address x.x.33.150 tcp eq www
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
permit
policy-map type loadbalance first-match T_R_L7policy
class class-default
sticky-serverfarm T_R_sticky_cookie
policy-map multi-match T_R_L4Policy
class T_R_L4Class
loadbalance vip inservice
loadbalance policy T_R_L7policy
loadbalance vip icmp-reply active
nat dynamic 2 vlan 1000
interface vlan 1000
ip address x.x.33.148 255.255.254.0
access-group input ALL
nat-pool 2 x.x.33.151 x.x.33.151 netmask 255.255.254.0 pat
service-policy input remote_mgmt_allow_policy
service-policy input T_R_L4Policy
no shutdown
ip route 0.0.0.0 0.0.0.0 x.x.32.1
ssh key rsa 1024 force+------------------------------------------+
+-------------- HTTP statistics -----------+
+------------------------------------------+
LB parse result msgs sent : 421347 , TCP data msgs sent : 2099597
Inspect parse result msgs : 0 , SSL data msgs sent : 0
sent
TCP fin msgs sent : 6169 , TCP rst msgs sent: : 769
Bounced fin msgs sent : 5 , Bounced rst msgs sent: : 1
SSL fin msgs sent : 0 , SSL rst msgs sent: : 0
Drain msgs sent : 337811 , Particles read : 5040829
Reuse msgs sent : 0 , HTTP requests : 342499
Reproxied requests : 183422 , Headers removed : 37475
Headers inserted : 342124 , HTTP redirects : 0
HTTP chunks : 224859 , Pipelined requests : 71466
HTTP unproxy conns : 267246 , Pipeline flushes : 0
Whitespace appends : 0 , Second pass parsing : 0
Response entries recycled : 71302 , Analysis errors : 0
Header insert errors : 22 , Max parselen errors : 215
Static parse errors : 99 , Resource errors : 0
Invalid path errors : 0 , Bad HTTP version errors : 0
Headers rewritten : 0 , Header rewrite errors : 0
SSL headers inserted : 0 , SSL header insert errors : 0
SSL spoof headers deleted : 0 , Unproxy msgs sent : 267246
HTTP passthrough stat : 0
NOTE - We did turn on caching at one point to try and resolve the issue but it has since been turned off -
ACE 4710 - can I dynamically sticky all traffic to 1 server based on URL?
Hello all, I'm new to the ACE 4710 and need to know some details about stickyness.
As background, we are a small company with a SaaS product and a pair of webservers.
I have set up the loadbalancing default L7 Load-balancing rule to sticky based on a Cookie based Stickey Group.
That seems to be working and session traffic is sticking to a server during the user's session.
Based on a request from our outsourced developer they would like the Loadbalancer to not only sticky the users sessions, but also sticky a url to a server.
I would like this to happen dynamically as each of our clients will have their own url based on our standard domain like clientname.fixeddomain.com and I don't want to have to come back to the loadbalancer every time we add a client.
As I said, I'm new to these devices but understand the concepts, and am in the position of having to make it work little to no tranining on this hardware and no budget at this point to pay someone else for configuration and setup.
I just need to know at this point if I can stick all requests for a specific URL to a server to avoid caching issue while those sessions are active and have new connections to other client urls balanced among the webservers.
Hopefully this request makes sense.
Thanks,
Mark Steeves.Daniel,
Thanks for the reply, but I cannot reach the URL you included. It gives me a 403.
Therfore without reading the article, I wanted to ask if the proper setup would be:
1. Default L7 load-balancing action: Primary action: Sticky: Stickey Group using
Type = HTTP Header: Header name = Host
2. Server Farm: Predictor: Least Connections or Round Robin to distribute the load between the 2 web servers.
Using this setting in testing, it looks like all the traffic keeps going to 1 server only. Granted there is not much traffic t the servers, but I have 2 different url being tested. url1.ourdomain.com & url2.ourdomain.com
If you have another link for the above document, please let me know.
Thanks,
Mark Steeves. -
Hi,
Pls can you help me find out where is my error in the below:
I have an ACE 4710. Also I have 2 Bluecoat Proxy SG working in proxy mode. I want the ACE to be the Load Balancer for these 2 Proxy SG. I configure the ACE as below and put the vip-address in the Internet Explorer LAN Settings but it did not work. Also I configure Policy-based Routing on the Core Switch (for any http or https traffic going through core apply set ip next-hop vip-address).
Core SW SVI:
interface Vlan56
description BC Proxy
ip address 10.0.1.33 255.255.255.224
interface Vlan57
description ACE-LB-Alias
ip address 10.0.1.65 255.255.255.224
ACE 4710:
hostname VSS-ACE-BC-01
interface gigabitEthernet 1/1
description Management
speed 1000M
duplex FULL
switchport access vlan 101
no shutdown
interface gigabitEthernet 1/2
description User Side
speed 1000M
duplex FULL
switchport access vlan 56
no shutdown
interface gigabitEthernet 1/3
description BC Proxy Side
speed 1000M
duplex FULL
switchport access vlan 57
no shutdown
interface gigabitEthernet 1/4
description Failover
speed 1000M
duplex FULL
ft-port vlan 900
no shutdown
context Admin
member sticky
access-list external line 10 extended permit ip any any
access-list external line 20 extended permit icmp any any
access-list external line 30 extended permit tcp any any
access-list external line 40 extended permit udp any any
access-list internal line 10 extended permit ip any any
access-list internal line 20 extended permit icmp any any
access-list internal line 30 extended permit tcp any any
access-list internal line 40 extended permit udp any any
probe tcp web443
port 443
interval 30
faildetect 1
passdetect interval 30
passdetect count 1
open 1
probe tcp web8080
port 8080
interval 30
faildetect 1
passdetect interval 30
passdetect count 1
open 1
rserver host BC01
ip address 10.0.1.41
inservice
rserver host BC02
ip address 10.0.1.42
inservice
serverfarm host web443
probe web443
rserver BC01
inservice
rserver BC02
inservice
serverfarm host web8080
probe web8080
rserver BC01
inservice
rserver BC02
inservice
sticky ip-netmask 255.255.255.255 address source group1
replicate sticky
serverfarm web8080
sticky ip-netmask 255.255.255.255 address source group2
replicate sticky
serverfarm web443
class-map type management match-any REMOTE_ACCESS
2 match protocol telnet any
3 match protocol ssh any
4 match protocol icmp any
5 match protocol http any
6 match protocol snmp any
class-map match-all external-web
2 match virtual-address 10.0.1.70 any
class-map match-all external-web443
2 match virtual-address 10.0.1.70 any
class-map match-any nat-class
2 match access-list external
policy-map type management first-match REMOTE_MGMT
class REMOTE_ACCESS
permit
policy-map type loadbalance http first-match slb
class class-default
sticky-serverfarm group1
policy-map type loadbalance http first-match slb443
class class-default
sticky-serverfarm group2
policy-map multi-match external-access
class nat-class
nat dynamic 1 vlan 57
class external-web
loadbalance vip inservice
loadbalance policy slb
class external-web443
loadbalance vip inservice
loadbalance policy slb443
timeout xlate 120
interface vlan 56
description Server-Side
ip address 10.0.1.43 255.255.255.224
ip verify reverse-path
alias 10.0.1.40 255.255.255.224
peer ip address 10.0.1.44 255.255.255.224
mac-address autogenerate
access-group input internal
service-policy input REMOTE_MGMT
no shutdown
interface vlan 57
description VIP-Interface
ip address 10.0.1.67 255.255.255.224
alias 10.0.1.66 255.255.255.224
peer ip address 10.0.1.68 255.255.255.224
mac-address autogenerate
access-group input external
service-policy input external-access
service-policy input REMOTE_MGMT
no shutdown
interface vlan 101
description Management
ip address 10.220.1.131 255.255.255.0
alias 10.220.1.133 255.255.255.0
peer ip address 10.220.1.132 255.255.255.0
mac-address autogenerate
service-policy input REMOTE_MGMT
no shutdown
ft interface vlan 900
ip address 172.20.100.1 255.255.255.252
peer ip address 172.20.100.2 255.255.255.252
no shutdown
ft peer 1
heartbeat interval 300
heartbeat count 20
ft-interface vlan 900
ft group 1
peer 1
priority 200
peer priority 150
associate-context Admin
inservice
ip route 0.0.0.0 0.0.0.0 10.0.1.65I see that you used:
nat dynamic 1 vlan 57
Where is the nat pool on Vlan 57 ?
May be you can try to assign that and that should help.
Something like below:
Interface vlan 57
nat-pool 1 10.0.1.93 10.0.1.93 netmask 255.255.255.224 pat
regards,
Ajay Kumar -
I have ACE 4710 and I need configuration:
I have real web-server with folders : /1/index.html, /2/index.html, /3/index.html
I need to balance virtual service:
If I try to connect URL: http://server/index.html, then ACE balance among
http://real_server/1/index.html,
http://real_server/2/index.html,
http://real_server/3/index.htm
How can I configure ACE ?ACE, can't modify the url.
But it can send redirect.
So you could build 3 redirect rservers, and have ACE loadbalance between them.
rserver redirect HTTP-REDIRECT1
webhost-redirection http://real_server/1/index.html
inservice
rserver redirect HTTP-REDIRECT2
webhost-redirection http://real_server/2/index.html
inservice
rserver redirect HTTP-REDIRECT3
webhost-redirection http://real_server/3/index.html
inservice
serverfarm redirect SF_REDIRECT
rserver HTTP-REDIRECT1
inservice
rserver HTTP-REDIRECT2
inservice
rserver HTTP-REDIRECT3
inservice
But even if it works, this does not sound good.
It seems like a design done by an application server person who does not know how network loadbalancers work.
It seems like all you need is stickyness, which you are trying to achieve by redirecting to /1 or /2 or /3.
But this can be done differently with cookies or by just doing stickyness on source ip address.
Gilles. -
Hi. I'm working on the Cisco ACE 4710 to be able to load balance web Traffic between several web servers. but despite following the steps mentioned on the Cisco configuration guide (specially this link and related docs: http://docwiki.cisco.com/wiki/Cisco_ACE_4700_Series_Appliance_Quick_Start_Guide,_Release_A3(1.0)_--_Creating_a_Virtual_Context) we did not managed to make it. we tested both the "bridged scenario" and "routed scenario" but none of them is working. specifically "configuring Nat" in the above link is very confusing and is not clear; because it's not the same as Cisco IOS, which we used to implement it that way.
Routed Scenario:
==========================================
probe http Http_Probe
description Server Healty Check
port 80
request method head url /index.htm
probe icmp ICMP_Check
interval 10
passdetect interval 5
rserver host NetCad_Server_1
ip address 172.16.1.100
probe ICMP_Check
inservice
rserver host NetCad_Server_2
ip address 172.16.1.101
probe ICMP_Check
inservice
rserver host NetCad_Server_3
ip address 172.16.1.102
probe ICMP_Check
inservice
serverfarm host NetCad_Servers
probe Http_Probe
rserver NetCad_Server_1 80
inservice
rserver NetCad_Server_2 80
inservice
rserver NetCad_Server_3 80
inservice
sticky http-cookie Cookie1 1
serverfarm NetCad_Servers
class-map match-all VS_NetCad
2 match virtual-address 192.168.13.162 255.255.252.0 tcp any
policy-map type management first-match mgmt-pm
class class-default
permit
policy-map type loadbalance first-match VS_NetCad-l7slb
class class-default
serverfarm NetCad_Servers
policy-map multi-match int40
class VS_NetCad
loadbalance vip inservice
loadbalance policy VS_NetCad-l7slb
loadbalance vip icmp-reply
interface vlan 40
description Client Side
ip address 192.168.13.161 255.255.252.0
ip options allow
no normalization
no icmp-guard
access-group input Permit_ALL
service-policy input mgmt-pm
service-policy input int40
no shutdown
interface vlan 41
description Server Side
ip address 172.16.1.1 255.255.255.0
ip options allow
no normalization
no icmp-guard
access-group input Permit_ALL
nat-pool 1 172.16.1.110 172.16.1.110 netmask 255.255.255.255 pat
service-policy input mgmt-pm
no shutdown
ip route 0.0.0.0 0.0.0.0 192.168.12.1
==========================================Hi,
Let me explain you.
Assuming client IP as 1.1.1.1, VIP as 2.2.2.2 and Real Server as 3.3.3.3
Consider the simple situation where client needs to access an application hosted on 3.3.3.3. Client sends a request which comes to VIP.
src 1.1.1.1----->dst------->2.2.2.2. ACE after matching conditions and taking LB decision decides to send it to 3.3.3.3 real server. Performs destination NAT and forwards the client request to 3.3.3.3. So the above packet L3 header will now look like:
src 1.1.1.1 dst 3.3.3.3. When reply comes from server, ACE will change src 3.3.3.3 back to 2.2.2.2 and forwards the request to client 1.1.1.1. SIMPLE LB.
Now comes a situation where let's say you want to hide the client IP from server or let's say server's default GW is not ACE or client and server are in same subnet but need to communicate through VIP on ACE etc.
Src 1.1.1.1 dst 2.2.2.2
After LB ace decides to send it to 3.3.3.3 but also policy multi match has nat rule (nat dynamic 1 vlan x). But packet would be forwarded from server vlan where you have NAT pool defined. So let's say pool IP is 3.3.3.4. So ACE will perform both destination as well as src NAT here before forwarding the packet to server and packet L3 header will look like:
src 3.3.3.4 ----->dst 3.3.3.3
Now when 3.3.3.3 has to send packet back, ACE will answer ARP for 3.3.3.3 and hence packet will come back to ACE which will again change the L3 header IP's and send it out the client VLAN towards client.
So NAT is always applied to server side vlan and that's why pool is chosen from server side subnet.
Let me know if you have any questions.
Regards,
Kanwal -
I will buy an appliance with the main funcionality or idea of load balancing of web servers.
I heard that CSS is an obsolete hardware than goes to EOL and the new hardware is the ACE4710. Is it?
Could someone tell me the pricipal differences? Or could someone recomend me some of them?The CSS was created more than 10 years ago. It does a great job but we have stopped adding new features to it for some time now.
The Ace 4710 is the new product, designed 2 years ago and with a huge team of developpers still adding new features to it...like ipv6 support coming soon.
Gilles. -
Can't install ACE 4710 license
Hi,
I've tried to installed the license, but is not successful, below are the steps which i've taken to installed the license, with error messages. pls. assist.
CBJ6-LBDMZ2/Admin# copy tftp://10.2.18.66/ACE20090909090659371.lic disk0:
Enter the destination filename[]? [ACE20090909090659371.lic]
Trying to connect to tftp server......
TFTP get operation was successful
685 bytes copied
CBJ6-LBDMZ2/Admin# license install disk0:ACE20090909090659371.lic
Installing license... failed: Can't install this license with the current countCBJ6-LBDMZ2/Admin# show licen
ACE20090727112500202.lic:
SERVER this_host ANY
VENDOR cisco
INCREMENT ACE-AP-01-LIC cisco 1.0 permanent 1 \
VENDOR_STRING=1 HOSTID=ANY \
NOTICE="200907271125002021 \
1211J5CB363" SIGN=F2E3AFA69526
I think you have an HW appliance (code: ACE-4710-K9) with one a la carte license ( ACE-AP-01-LIC).
You bought a Bundle upgrade license, and this is not compatibly with you current license ( a la carte license).
To use the ACE-4710-BUN-UP2= ( 1G Bundle to 2G Bundle Upgrade License) you need to have a bundle product like the
ACE-4710-1F-K9.
Check this:
Table 1 ACE Licensing Bundles
License Model Description Upgrade Path
ACE-4710-0.5F-K9
This license bundle includes the following items:
•ACE 4710 appliance
•0.5-Gbps throughput license (ACE-AP-500M-LIC)
•100-Mbps compression license (ACE-AP-C-100-LIC)
•100 SSL transactions per second (TPS) license (ACE-AP-SSL-100-K9)
•5 virtual contexts license (ACE-AP-VIRT-5)
•Application acceleration license (50 connections) (ACE-AP-OPT-50-K9)
You have the option to upgrade to the 1-Gbps, 2-Gbps, or 4-Gbps bundle.
Start the upgrade with ACE-4710-BUN-UP1=.
ACE-4710-1F-K9
This license bundle includes the following items:
•ACE 4710 appliance
•1-Gbps throughput license (ACE-AP-01-LIC)
•500-Mbps compression license (ACE-AP-C-500-LIC)
•5000 SSL TPS license (ACE-AP-SSL-05K-K9)
•5 virtual contexts license (ACE-AP-VIRT-5)
•Application acceleration license (50 connections) (ACE-AP-OPT-50-K9)
You have the option to upgrade to the 2-Gbps or 4-Gbps bundle.
Start the upgrade with ACE-4710-BUN-UP2=.
ACE-4710-BAS-2PAK
This license bundle includes the following items:
•Two ACE 4710 appliances
•1-Gbps throughput license (ACE-AP-01-LIC)
ACE-4710-BAS-2PAK also includes the following default options:
•1000 SSL TPS
•100-Mbps compression
•5 virtual contexts
•Application acceleration (50 connections)
You have the option to upgrade to the 2-Gbps or 4-Gbps bundle.
Start the upgrade with ACE-4710-BUN-UP2=. Two upgrade licenses are required for upgrading two units of the ACE-4710-BAS-2PAK bundle.
ACE-4710-2F-K9
This license bundle includes the following items:
•ACE 4710 appliance
•2-Gbps throughput license (ACE-AP-02-LIC)
•1-Gbps compression license (ACE-AP-C-1000-LIC)
•7500 SSL TPS license (ACE-AP-SSL-07K-K9)
•5 virtual contexts license (ACE-AP-VIRT-5)
•Application acceleration license (50 connections) (ACE-AP-OPT-50-K9)
You have the option to upgrade to the 4-Gbps bundle.
Start the upgrade with ACE-4710-BUN-UP3=.
ACE-4710-4F-K9
This license bundle includes the following items:
•ACE 4710 appliance
•4-Gbps throughput license (ACE-AP-04-LIC)
•2-Gbps compression license (ACE-AP-C-2000-LIC)
•7500 SSL TPS license (ACE-AP-SSL-07K-K9)
•5 virtual contexts license (ACE-AP-VIRT-5)
•Application acceleration license (50 connections) (ACE-AP-OPT-50-K9)
This is the highest value bundle.
ACE-4710-BUN-UP1
0.5 to 1-Gbps throughput bundle upgrade license
See the Upgrade Path outlined above.
ACE-4710-BUN-UP2
1 to 2-Gbps throughput bundle upgrade license
See the Upgrade Path outlined above.
ACE-4710-BUN-UP3
2 to 4-Gbps throughput bundle upgrade license
See the Upgrade Path outlined above.
Table 2 ACE Licensing Options
Feature License Model Description
Performance Throughput
Default
1-Gbps throughput.
ACE-AP-500M-LIC
0.5-Gbps throughput.
ACE-AP-01-LIC
1-Gbps throughput.
ACE-AP-02-LIC
2-Gbps throughput.
ACE-AP-04-LIC
4-Gbps throughput.
ACE-AP-02-UP1
Upgrade from 1-Gbps to 2-Gbps throughput.
ACE-AP-04-UP1
Upgrade from 1-Gbps to 4-Gbps throughput.
ACE-AP-04-UP2
Upgrade from 2-Gbps to 4-Gbps throughput.
Virtualization
Default
1 admin/5 user contexts.
ACE-AP-VIRT-020
1 admin/20 user contexts.
SSL
Default
100 TPS.
ACE-AP-SSL-05K-K9
5000 TPS.
ACE-AP-SSL-07K-K9
7500 TPS.
ACE-AP-SSL-UP1-K9
Upgrade from 5000 TPS to 7500 TPS.
HTTP Compression
Default
100-Mbps.
ACE-AP-C-500-LIC
500-Mbps.
ACE-AP-C-1000-LIC
1-Gbps.
ACE-AP-C-2000-LIC
2-Gbps.
ACE-AP-C-UP1
Upgrade from 500-Mbps to 1 Gbps.
ACE-AP-C-UP2
Upgrade from 500-Mbps to 2 Gbps.
ACE-AP-C-UP3
Upgrade from 1 Gbps to 2 Gbps.
Application Acceleration Feature Pack License
ACE-AP-OPT-LIC-K9
Application acceleration and optimization. By default, the ACE performs up to 50 concurrent connections. With the application acceleration and optimization software feature pack installed, the ACE can provide greater than 50 concurrent connections.
This license increases the operating capabilities of the following features:
•Delta optimization
•Adaptive dynamic caching
•FlashForward
•Dynamic Etag
ACE-AP-02-LIC=
Upgrade Performance License 2 Gbps Spare
Maybe you are looking for
-
Satellite P500-1D6 - Small bug between cover plate and screen.
Hi I have a small bug (in Dutch: "donderbeestje") between the protective glass and the actual screen. Where I bought the laptop they yell me that they can't do anything about it and this is not under warranty of Toshiba. For me however, this should b
-
How do I get my e-mail address into my profile
I click on options (then wait a very long time) My email is shown as null. I follow the click here link to update it but get a box asking me if I am a new user, and the email requires a password, I don't understand why. If I enter a password and my e
-
Workflow terminate if Map MDMWebService CheckOutResponse to artifact in BPM
Hello, All Have you ever try to map a MDM Web Service checkout response to an Data Object in BPM? I have published MDM Web Service (checkout checkin) and try to use them as automatical activity in BPM. As for the checkout MDM web Service, it re
-
Hi, I'm creating a file with F110 - Domiciliary Receipt - using program RFFOES_D ( Spain ). The output is ok with all the data except the client bank data !! this information is maintained in TR: FD03, which has the adress from the client that appear
-
What does the yellow triangle mean on a mx439 printer
What does the lighted yellow lite (triangle) on a mx439 printer mean?