ACE behaviuor if Cache sends original client IP ?

Netpros,
We are doing transparent caching with Blue-Coat and the caches have a bypass list where the web page is not cached and the client' original IP is sent from the cache to ACE to internet.
Is there any feature on ACE which shall block this session?
Thanks in advance
Shukla.

If the Bluecoat send client Ip address to Internet then the return packet has to go to the same active ACE... If the ACE is in one ARM mode and is you use PBR to send the WEB traffic to ACE to loadbalance across Bluecoat..then there should be Reverse PBR on the interfaces which return traffic come through and the has to forwaded to same active ACE ..Because once u enables Ip Spoofing on Bluecoat .. when it get a request from client.. Bluecoat will be initiating a different TCP session with source IP as client IP address.. so if this traffic dont come back to the same proxy and if it directly goes to the client then client will drop the packet

Similar Messages

On my imac, All of a sudden I am unable to send original emails with any attachments. I can attach the file but when I try to send it, it won't send. Also, if I am emailing back and forth as it gets longer, it no longer transmits

On my imax, all of a sudden I am unable to send original emails with attachments of any size. I can attached the file but when I try to transmit, it will not go.
Also, if I am emailing back and forth, once there gets to be several threads, it will no longer transmit. Any suggestions. I am using gmail in the apple mail system

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)??? -And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)???
-And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

How do I edit the font and bold text in the message box in adobe send before sending to client?

How do I edit the font and bold text in the message box in adobe send before sending to client?

Hi BRAEWOOD DEVELOPMENTS,
You can edit the Subject & Message when you've selected Send Personalized Invitations (though you can't change the font or style of the text).
Best,
Sara

What video format do I send a client in France?

What video format do I send a client in France?

Sorry I thought you were wasting mine.
Let's start again. If you're sending the client a digital file for use on a computer, it doesn't matter what you send him/her as long as the format can be played back and the client has the codec. It doesn't matter a jot whether they're in France or Brazil or Japan. If you're sending them a videotape, it needs to be at 25fps. If it's standard defintion it needs to be PAL. If it's a DVD it doesn't matter as any DVD player sold in Europe made in the last 10 years will playback either NTSC or PAL. If it's HD maybe they want Blu-ray, in which case it doesn't matter either as Blu-ray players will play any Blu-ray supported frame rate and there is no difference in the codec between the US or Europe.
I can go on, but it would be easier if you said what you had and what they wanted.

How can I get a count of objects in the near cache? (Extend client)

Hi,
I'm trying to figure out how to get the count of objects in my near cache (from c++ client). Knowing the size of the near cache is a key factor when optimizing configurations for performance.
However if I call size() on the cache handle I get the count of objects in the cache (ie the cluster). How can I get a count of objects in the near cache?
Thanks
Rich Carless

H Rich,
It may not be ideal, but I think you may be able to infer the size by using the HeapAnalyzer (http://download.oracle.com/docs/cd/E15357_01/coh.360/e15728/classcoherence_1_1lang_1_1_heap_analyzer.html) facility, specifically the "class" based HeapAnalyzer. Its Snapshot representation http://download.oracle.com/docs/cd/E15357_01/coh.360/e15728/classcoherence_1_1lang_1_1_class_based_heap_analyzer_1_1_snapshot.html provides a mapping between class name and ClassStats (http://download.oracle.com/docs/cd/E15357_01/coh.360/e15728/classcoherence_1_1lang_1_1_class_based_heap_analyzer_1_1_class_stats.html) which provides information on how many instances of a given class type are in memory. Note the reported counts are process wide but if your key or value type are distinct you may be able to infer your answer. I realize this is rather complex, my only other suggestion would be to just make some guesses on size and see how they effect performance.
Mark
Oracle Coherence

Retrieving the Message Header In Asyn Scenario With Sender As Client Proxy

Hi All,
I have a asynchronous scenario (XI to SOAP),where on the sender side Client Proxy is being triggered by an ABAP Report.
My problem is,that as the Proxy is in Sender Side I am not able to get the Message Header (i.e. the Standard Header Structure for Proxy Scenarios which I need to send as an input for creating Alerts).
This message header is automatically populated when I fill it up via message mapping in case of Server Proxy...But for Client Proxy(Async Case)...I am not able to make out......
The Structure Is:
SYSTEM_OF_ORIGIN
SENDER_INTERFACE
SENDER_NAMESPACE
MESSAGE_ID
SENDER_SERVICE
RECEIVER_INTERFACE
RECEIVER_NAMESPACE
RECEIVER_SERVICE
PROCESS_AREA
How can this message header be automatically retrived in the ABAP Code ????
Please help!!!!!!
Regards,
Sriparna

Hi,
plz find all header variables, explanations and examples at [SAP help: Querying the XI Message Header|http://help.sap.com/saphelp_nw2004s/helpdata/en/a1/082589fc4246f09793039d5fb01a17/content.htm]
Regards,
Udo
Edited by: Udo Martens on Jul 20, 2010 12:35 PM

What Adobe product do I need in order to be able to flatten a pdf document so that my comment/stamps appear when I send to clients.

What Adobe product do I need in order to be able to flatten a pdf document so that my comment/stamps appear when I send to clients.

If your clients are opening the file with Adobe Reader, they should show even if not flattened.
If they are not and you absolutely need to flatten them, maybe the pre-press tools in Adobe Acrobat would work for you.

Sending Original Attachments with Reply

How do I send original attachments along with reply to preserve the "string" of emails?

John,
Just as with Send Windows Friendly, and the new Always Insert Attachments at End of Message (a good feature, btw) the setting persists until clicked again. It does not have to be done with each reply.
Ernie

Can reply to email but not send original email

I've had my iPhone 4 for a month with no problems. Suddenly, I cannot send original email - the "send" button is greyed out. But I can send my replies to email!
No settings were changed. I restored the phone as per the suggestion of someone in the Apple store, but it made no difference.

What type of account is he using -- POP, IMAP or .mac?
How is he connected to the internet -- Dial-up, broadband with modem only, modem plus router, and/or wireless?
Ernie

HELP!!! - Can the ClientHandler class send the client a file to .....

Can the ClientHandler class send the client a file to a specific location on the client's PC[e.g. c:\games\folder1] ?

What's the definition of your ClientHandler class?
You can send any file you want to a machine that supports a server that is able to write the files. Its all up to the target machine what it will allow you to do. Is your target machine running an FTP server? If so you can use the URL class to send files to it.
Did you check out the Tivoli Remote Control application I suggested on your earlier thread?

ACE: Can I loadbalance based on client Source IP/and client tcp source port?

We recently migrated serving a client from being thick client at the desktop to being served via a citrix farm. Prior to the migration the clients came from about 5000 unique source IP's to their VIP, now they come from only 31 unique source IP's from the citrix servers in the farm. A citrix server can host 400 client sessions, since the default action of the ACE is to loadbalance based on source IP's, the ACE is sending up to 400 sessions from one citrix server to 1 real server in the farm. Is there anyway I can loadbalance based on client source IP and tcp source port so the ACE views the 400 sessions from one citrix server as unique sessions? The application does not require persistence.

Hello,
Yes, you can configure a "Sticky Layer 4 Payload" as descirbed on this Link:
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/command/reference/sticky.html#wp1039276
Unfrotunately I do not have any working example. You must calculate the right values for the Offset and the Length to configure.
Regards Jean-Marc

ACE deployment with two interface for client side

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-fareast-language:EN-US;}
In a ACE router mode deployment, I have a single context configured with two interface for server side and two interface for client side. In this situation how can we meet the demands of customers arriving from both networks? How can the ACE handle the client request if we configure one default-gateway to each network?
Regards,
Egomes

Enable "mac-sticky" comand under each client inteface.
It will ensure that ACE sends the response to the MAC address from which the request to the VIP was recieved.
For more details
http://cisco.biz/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/command/reference/if.html#wp1033275
HTH
Syed Iftekhar AHmed

With Netscape all of the Webcam shots from live feeds were automatically saved in my cache folder and I could simply open my cache send the saved files into AcDsee and convert them into jpgs, It would save as many as I would allow space for. With firefox

I cant retrieve my images from webcams that are cached any more with mozilla. With netscape all of the live webcam images from live cams were automatically saved in my cache folder and all i had to do was open it send the files to acdsee and turn them into jpgs. It would save them untill the Cache ran out of room no matter how many files or sites I had running. Mozilla seems to save what it wants when it wants and often dose not save any that I can retrieve because I believe it is bulking them into Cache 123 or 4 and those i cant open to retrieve the files. Sometimes it saves 100 or so and sometimes 2 or 3 sometimes 10 or more but i don't seem to have any control over what it does or does not save to retrieve no matter how much space i allow for the cache to save.
== This happened ==
Every time Firefox opened
== I finally gave up trying to keep netscape due to all the ridiculess popups and continued reminders from you saying i had to switch over

You have or had an extension installed (Ant.com Toolbar) that has changed the user agent from Firefox/3.6.3 to Firefox/3.0.12.
You can see the Firefox version at the top and the user agent at bottom of the "Help > About" window (Mac: Firefox > About Mozilla Firefox).
You can check the '''general.useragent''' prefs on the '''about:config''' page.
You can open the ''about:config'' page via the location bar, just like you open a website.
Filter: '''general.useragent'''
If ''general.useragent'' prefs are bold (user set) then you can right-click that pref and choose ''Reset''.
See [[Web sites or add-ons incorrectly report incompatible browser]] and [[Finding your Firefox version]]
See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

Want to find out how much data a Web Service is sending to client (JWSDP)

Well, the subject line didn't fit what I was intended to say, so if you don't get what I am saying in the subject line, I am sorry.
My question is... I have a Web Service client that uses stub classes generated by wscompile in JWSDP. I am wondering, it there a way to find out how much data the Web Service is sending back to my client.
The reason I asked is this, I used WebLogic 7.0 workshop to create a Web Service and also used JWSDP to create the same Web Service which deploys to Tomcat. The generated WSDL files from WebLogic workshop and JWSDP that expose the same functionalities have differences. The WSDL from WebLogic workshop is 1.5 times the size of the WSDL from JWSDP. When I tested both with client programs, calling the Web Service in Tomcat (which uses JWSDP to built) is much quicker than calling the Web Service in WebLogic.
For this reason, I would liked find out if the Web Service from WebLogic is sending more data than the one created with JWSDP.
Thanks.

I've used the TcpTunnelGui utility to see the HTTP flowing up and down the wire, that might help you.

ACE behaviuor if Cache sends original client IP ?

Similar Messages

Maybe you are looking for