ACE - Connection Reset

Hello All,
I have a strange issue but I'm not sure it is content switch related in any way.
A group of hosts talk to two servers connected behind a content switch via a VIP.
Some dev are complaining about a high level of discarded / reset connections.
From the trace we ran you can see some RST,ACK packets in Wireshark but no RST packet prior to that last RST,ACK packet sent by the ACE module to the clients.
Did anybody come across the same kind of situation?
Regards,
Thibault.

Is there a chance that you are running code A2 (3.2)? You may be hitting a bug that I have found within my environment as well. CSCti88248.
CSCti88248—When the ACE is waiting to reassemble client packets, it may reset TCP-based client connections if all the following conditions exist:
–ACE is configured with a Layer 7 load-balancing policy where the ACE proxies the client-side TCP connection before making a load-balancing decision
–Client-side connection experiences packet loss
–The TCP TX racing messages (data) counter in the output of the show np n me-stats -stcp is incrementing
This problem can also occur with secure (SSL) terminated connections. Workaround: Configure an empty connection parameter map and add it to a multi-match policy map under the class map that is configured for the VIP experiencing the problem. For example:
parameter-map type connection TCPReassembly
policy-map multi-match MultiMatch_PolicyMap
   class HTTP_VIP_80
      loadbalance vip inservice
      loadbalance policy L7_HTTP_PolicyMap
      loadbalance vip icmp-reply active
      connection advanced-options TCPReassembly
Regards

Similar Messages

Ace - connection reset (Error 101)

Hi, I have a problem with a Cisco ACE, after approximately an hour being in production, for all new connections
it gives the message: connection reset. The message on any web browser is: connection reset (Error 101)
It blocks any backend server (Apache).I get same error also when I try to connect direcly to the backend address.
This error saturates the connections on the servers (in the log of the DB I found error connection reset)
Without ACE all work fine, it's not a load traffic issue.
It seems like once opened a connection the ace does not close it anymore!
But the graphical snmp servers do not report the increase in connections, what is mistake ?
The balancer manages two physical servers and is configured in stickyness mode
Please find attached the configuration
logging enable
logging timestamp
logging trap 4
logging buffered 3
logging host 172.16.0.2 udp/514 format emblem
access-list ANY line 8 extended permit icmp any any
access-list ANY line 16 extended permit ip any any
probe http HTTP_PROBE1
request method get url /index.php
expect status 200 206
expect status 300 307
expect status 400 417
probe tcp PROBE_TCP
interval 30
rserver host 03a.it
ip address 172.16.0.1
conn-limit max 50000 min 40000
inservice
rserver host 03b.it
ip address 172.16.0.2
conn-limit max 50000 min 40000
inservice
serverfarm host FARM_WEB
predictor leastconns
probe HTTP_PROBE1
rserver 03a.it
    inservice
rserver 03b.it
    inservice
parameter-map type http HTTP_PARAMETER_MAP
persistence-rebalance
sticky http-cookie session StickyGroup1
timeout 3600
serverfarm FARM_WEB
class-map type management match-all ICMP-ALLOW_CLASS
2 match protocol icmp source-address x.x.x.x
class-map match-all L4-WEB-IP
2 match virtual-address x.x.x.x tcp eq www
class-map type management match-all REMOTE_ACCESS
2 match protocol ssh any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
    permit
policy-map type loadbalance http first-match WEB_L7_POLICY
class class-default
    sticky-serverfarm StickyGroup1
    insert-http x-forward header-value "%is"
policy-map multi-match WEB-to-vIPs
class L4-WEB-IP
    loadbalance vip inservice
    loadbalance policy WEB_L7_POLICY
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 2541
    appl-parameter http advanced-options HTTP_PARAMETER_MAP
interface vlan 125
ip address
access-group input ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input WEB-to-vIPs
no shutdown
interface vlan 254
ip address
access-group input ANY
nat-pool
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
At the moment this happens, the simultaneous connections (command: show conn) on the server are around 350
the CPU load is 2%
sticky database has approximately 24000 records.
Log level is set to 4. But no error report.
Do you need more info to resolve the problem?
Thank you
Best Regards
N.

Hello Nicolas,
I wonder if you can include these values:
parameter-map type http HTTP_PARAMETER_MAP
case-insensitive
persistence-rebalance
set header-maxparse-length 65535
set content-maxparse-length 65535
length-exceed continue
parsing non-strict
I also noticed a lot of errors which might be caused also due to these denied under the #show resource usage all which may indicate you are reaching the license limits, but you should discuss it with your Cisco SE, please see below:
                                               Allocation
        Resource         Current       Peak        Min        Max       Denied
Context: vrack254
conc-connections              4       1267      60000      60000          0
mgmt-connections              2         28        748        748          0
proxy-connections             0       1255       7864       7864          0
xlates                        0          0       7864       7864          0
bandwidth                   572    3824781    3740624 127490624    1416859
    throughput                 96    3712886    3740624    3740624    1416859
    mgmt-traffic rate         476     111895          0 123750000          0
connection rate               1       1729       4500       4500          0
ssl-connections rate          0          0        224        224          0
mac-miss rate                 0         15         16         16          4
inspect-conn rate             0          0       1800       1800          0
http-comp rate                0          0    5898240    5898240          0
to-cp-ipcp rate               0         11         36         36          0
acl-memory                 8216      10568     744800     744800          0
sticky                    22978      22978      31456      31456          0
regexp                       19         23       7864       7864          0
syslog buffer             30720      30720      30720      30720          0
syslog rate                   0          6        750        750          0
Can you upload the specific error which you are getting also?
Jorge

ACE: connection reset using Firefox

Hi Community,
I'm expecting some problems with ACE. I've configured it to loadbalance between 4 nodes with SSL termination at ACE.
Everything was working fine up to the identification of a problem using firefox browser. With Chrome and IE works fine.
The user is trying to upload a file to one of the 4 nodes. When the costumer click at the send button, the Firefox shows the following message: Connection Reset.
Can you suggest some actions? This problem just happens when the user try to upload the file. Whe he's just surfing through the system, works fine.
Thank you in advance.
------ Configuration ------
ACE-01-SJPR/eproc4# sh runGenerating configuration....logging enablelogging timestamplogging trap 5logging buffered 7access-list acl_ALL line 5 extended permit ip any any access-list acl_ALL line 10 extended permit icmp any any probe snmp cpu_servers version 2c community Public oid 1.3.6.1.2.1.25.3.3.1.2 threshold 60probe http pb_http port 80 interval 5 passdetect interval 30 passdetect count 2 request method get url /eprocV2/index.php expect status 200 200probe icmp pb_ping interval 10 faildetect 2 passdetect interval 5 passdetect count 2rserver host eproc-1g-aplic-noh1 ip address 10.7.123.1 inservicerserver host eproc-1g-aplic-noh2 ip address 10.7.123.2 inservicerserver host eproc-1g-aplic-noh3 ip address 10.7.123.3 inservicerserver host eproc-1g-aplic-noh4 ip address 10.7.123.4 inservicerserver redirect srv_eproc4_https_redirect description ## Redireciona trafego de HTTP para HTTPS ## webhost-redirection https://%h%p 302 inserviceserverfarm host farm_eproc4 failaction purge probe pb_ping probe pb_http rserver eproc-1g-aplic-noh1 80 cookie-string "eproc-1g-aplic-noh1" inservice rserver eproc-1g-aplic-noh2 80 cookie-string "eproc-1g-aplic-noh2" inservice rserver eproc-1g-aplic-noh3 80 cookie-string "eproc-1g-aplic-noh3" inserviceserverfarm redirect farm_eproc4_https_redirect description ## Redireciona trafego de HTTP para HTTPS ## rserver srv_eproc4_https_redirect inserviceparameter-map type http HTTP_PARAM description Reuse TCP and Keep Persistence case-insensitive persistence-rebalanceparameter-map type ssl PARAMMAP_SSL_TERMINATION cipher RSA_WITH_3DES_EDE_CBC_SHA cipher RSA_WITH_AES_128_CBC_SHA priority 2 cipher RSA_WITH_AES_256_CBC_SHA priority 3 rehandshake enabledparameter-map type connection TCP_PARAM description TCP Options for SSL exceed-mss allowsticky http-cookie acecookie st_eproc4_cookie cookie insert browser-expire serverfarm farm_eproc4sticky http-cookie acecookie st_eproc4_https_redirect cookie insert browser-expire serverfarm farm_eproc4_https_redirectssl-proxy service CISCO-SSL-PROXY key my.key cert my-cert.pem ssl advanced-options PARAMMAP_SSL_TERMINATIONclass-map type management match-any acesso_remoto description ## Acesso Remoto ao ACE ## 2 match protocol telnet any 3 match protocol ssh any 4 match protocol icmp any 5 match protocol snmp anyclass-map type http loadbalance match-any https_redirect_eproc4 2 match http url /.*class-map match-all vip_eproc4_http 8 match virtual-address 10.7.3.252 tcp eq wwwclass-map match-all vip_eproc4_https 8 match virtual-address 10.7.3.252 tcp eq httpspolicy-map type management first-match acesso_mgmt class acesso_remoto permitpolicy-map type loadbalance first-match lb_eproc4_http class class-default sticky-serverfarm st_eproc4_cookiepolicy-map type loadbalance first-match lb_https_redirect class https_redirect_eproc4 sticky-serverfarm st_eproc4_https_redirect class class-default sticky-serverfarm st_eproc4_cookiepolicy-map multi-match policy_vip_eproc4 class vip_eproc4_http loadbalance vip inservice loadbalance policy lb_https_redirect loadbalance vip icmp-reply active nat dynamic 4093 vlan 4093 appl-parameter http advanced-options HTTP_PARAM class vip_eproc4_https loadbalance vip inservice loadbalance policy lb_eproc4_http loadbalance vip icmp-reply active nat dynamic 4093 vlan 4093 appl-parameter http advanced-options HTTP_PARAM ssl-proxy server CISCO-SSL-PROXYinterface vlan 4039 description ## Interface lado SERVIDOR ## bridge-group 1 access-group input acl_ALL no shutdowninterface vlan 4093 description ## Interface lado SERVIDOR ## bridge-group 1 access-group input acl_ALL nat-pool 4093 10.7.3.253 10.7.3.253 netmask 255.255.255.255 pat service-policy input policy_vip_eproc4 service-policy input acesso_mgmt no shutdowninterface bvi 1 ip address 10.7.3.251 255.255.0.0 no shutdownip route 0.0.0.0 0.0.0.0 10.7.1.1

From my prior experience I have seen similar issues with firefox.
Please try using firefox for reproducing the issue and get the output for below :
show np 1 me-stats -shttp
Look for counter value
Exceed max buffer errors: 16901 <<<<< Check if the counter increase after the test.
you can try few times and in case if you see the value increasing for “ Exceed max buffer errors”
I believe if you do the following and test that should fix it. I have seen similar issue with a customer and the below has fixed it.
configure set header-maxparse-length 65535 and set max-parse-time 65535 and set content-maxparse-length 65535
host1/Admin(config)# parameter-map type http http_parameter_map
host1/Admin(config-parammap-http)#
host1/Admin(config-parammap-http)# set content-maxparse-length 65535
host1/Admin(config-parammap-http)# set max-parse-time 65535
host1/Admin(config-parammap-http)# set header-maxparse-length 65535
host1/Admin(config-parammap-http)# length-exceed continue
Apply the above in multimatch policy :
appl-parameter http advanced-options http_parameter_map
Let me know the result after applying the above.

Urgent help required "java.lang.Exception: Connection reset"

Hi Everyone,
I am getting error message when I access cluster database from grid console.
Error java.lang.Exception: Connection reset
I am unable to create jobs or do other admin stuff on the database, I have searched alot , restarted the repository database, restarted the emgc components, even the agents but of no use. The agent status showing OK as under.
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.3.0
OMS Version : 10.2.0.3.0
Protocol Version : 10.2.0.2.0
Agent Home : /app/oracle/agent/agent10g/rac2.tawaf
Agent binaries : /app/oracle/agent/agent10g
Agent Process ID : 19646
Parent Process ID : 19629
Agent URL : https://rac2.tawaf:3872/emd/main
Repository URL : https://tawafapp.tawaf:1159/em/upload
Started at : 2009-04-02 11:26:10
Started by user : oracle
Last Reload : 2009-04-02 11:26:10
Last successful upload : 2009-04-02 12:27:42
Total Megabytes of XML files uploaded so far : 3.48
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 86.22%
Last successful heartbeat to OMS : 2009-04-02 12:30:20
Agent is Running and Ready
The error reported in emoms.log is as under.
2009-04-02 12:37:25,073 [MetricCollector:RACHOMETAB_THREAD600:60] ERROR rt.RacMetricCollectorTarget _getAllData.184 - oracle.sysman.emSDK.emd.comm.CommException: Connection reset
oracle.sysman.emSDK.emd.comm.CommException: Connection reset
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1543)
at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:915)
at oracle.sysman.emo.rac.perform.metric.rt.RacHomeTab._getAllData(RacHomeTab.java:180)
at oracle.sysman.emo.rac.perform.metric.rt.RacHomeTab.getData(RacHomeTab.java:91)
at oracle.sysman.emo.perf.metric.eng.MetricCached.collectCachedData(MetricCached.java:404)
at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread._collectCachedData(MetricCollectorThread.java:596)
at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread.run(MetricCollectorThread.java:320)
at java.lang.Thread.run(Thread.java:534)
can anyone help me as its very urgent for me to clear this error.
thanks

this error is also reported against the cluster database.
Thread: SeverityLoad https://rac2.tawaf:3872/emd/main java.sql.SQLException: ORA-20613: Severity for unknown target. (target guid = 1938FC9C72DDAC01E0C0F268FFC5F6AD) ORA-06512: at "SYSMAN.EM_VIOLATION_CHECKS", line 174 ORA-04088: error during execution of trigger 'SYSMAN.EM_VIOLATION_CHECKS' Error occured at line : 43, File name:Severity

Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
The exact error message is as follows:
"There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later."
I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
Any help you can give me would be appreciated.

Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

Socket read error: connection reset by peer

Hi.
Has anybody experienced the error message �Socket read error: connection reset by peer�
Please see below for detailed information.
Appreciate your help
Regards
RT
Enviroment specification
Server: HP/UX 11.00 64-bit, Oracle RDBMS 8.1.6.0.0 64-bit
2 firewalls between client and db.
Client:
Win 2000,
SP3,
Oracle Client 8.1.7.0.0 ,JDBC OCI (thin JDBC driver,class12.zip)
JDK 1.3
JRUN3.0
The TCP protocol is being used in the communication
Error messages
Web Users receive: Socket read error: connection reset by peer
Trace files on the sever: Read unexpected EOF ERROR on 18.
Explanation: The error in the server sqlnet trace file, suggests that a client connection has terminated abnormally, i.e. client machine powered off, a cable removed or a network connection aborted without warning. No user has complained of such a problem and there is no client trace with an error.
The problem
The users of the java web application, experiencing an exception almost once or twice a day.
The JRUN web-server reports broken connections to the db and client are receiving "connection reset by peer".
At the moment when the errors occurs the users just have to wait a while(2-10 min) and then they can use the web application again.(no action is taken)
This problem can not be reproduced. The problem happens only occasionally when the network is under heavy load and new DB connection is being created.
The application
The java web-application uses a customized connection pooling against the database. This pool is shared among all the users of the website. whenever a user process needs to fetch data from the database, a free connection from this pool is allocated. The application is testing if the connection is valid before making a transaction (select '1' from dual). When the error occurs a ORA-3113 end-of-file on communication channel is returned to the application.
The path between the client and db involves at least two firewalls. The firewalls are opened for sql*net traffic. The network group can tell that enquiries from the app.server is not getting feedback from the db. They have not however, identified if the enquiries are reaching the db-srever, or if they are stopped earlier in the network.
Around 1000 users, are using other applications which uses dedicated sqlnet connections against the db and they have not experienced any problems.
Issues considered
Connection pooling
It is a customized connection pooling, developed by Lindorff developers.
I have read through the source code for the connection pooling and it does the job as it should, and in case of bad connection, it tries to create a new connection.
The log file shows that the call to the method DriverManager.getConnection() hangs until the server goes down, which is probably because of the fact that the method DriverManager.setLoginTimeout(), does not take effect and timeout value is Zero. ( According to oracle , Oracle JDBC does not support login timeouts and calling the static DriverManager.setLoginTimeout() method will have no effect).
Firewall
One thing to consider is when the firewall may decide to shut down the socket due to long inactivity of a connection. This will cause problems to JDBC Connection Pool because the pool is not aware of this disconnection at the TCP/IP level; until someone checks out the connection from the pool and tries to use it. The user will get a Socket read error: connection reset by peer.
Jrun timeout paramter is less than the firewall�s timeout so the firewall will not close a connection before Jrun does.
Number of processes the DB can handle
Processes parameter is 1300, , they have not experienced the Oracle error msg �max # of processes reached�.
Port redirection through a firewall:
Since the firewall has a sql net proxy Port redirection through a firewall is not a problem. Problems with port redirection only appear at connect time, but in this situation the connections fail long after the connection is established.
The network group
The network people who investigaged the problem at Lindorff report that there are a significant amount of "dropped packages" between the database server and the jdbc client (web-application) 24 hrs. The reason for this is "unknown established TCP packet" which means that the firewall does not consider these packages to be part of an already established session. The network group believes this happen because one of the hosts send a RESET or FIN signal which the firewall have noticed but are not received by the other host.
It seems like the firewall are dropping packages bacause of "Unknown
established TCP packet" from both the JDBC client and the TNSLISTENER on the database server. The dropped packages are SQL*Net v2 traffic so clearly Oracle products are involved

Presumably something is working.
Thus the problem is not with your code. At least not the database part that you have control over.
That error occurs when the other side closes the socket. Presumably you are catching lost connection exceptions and trying to restore it.

Timeouts, connection reset, and EOF on socket type HTTP, etc.

We've created our own HTTP client simulation tool to run multiple virtual users against Weblogic, but we're seeing lots of errors when we ramp up the number of virtual users. So I'm just trying to figure out if it's something about the way we're handling the sockets in the simulator, or some type of configuration on Weblogic. These are the types of messages I see in the log:
Tue Apr 18 16:48:13 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4803,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:13 EDT 2000: <ServletContext-Servlets> com.youcentric.servlet.LoginServlet: init
Tue Apr 18 16:48:13 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4806,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:13 EDT 2000: <ServletContext-Servlets> com.youcentric.servlet.LoginServlet: init
Tue Apr 18 16:48:15 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4815,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:15 EDT 2000: <ServletContext-Servlets> com.youcentric.servlet.LoginServlet: init
Tue Apr 18 16:48:21 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:37 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4816,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:42 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4817,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:51 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:51 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Thanks in advance,
Mike Gorman, Director of Architecture
YOUcentric, Inc.
Charlotte, NC
704-643-1000 x518
http://www.youcentric.com

Mike,
Try increasing the value of weblogic.login.readTimeoutMillis.
Mike Gorman wrote:
>
We've created our own HTTP client simulation tool to run multiple virtual users against Weblogic, but we're seeing lots of errors when we ramp up the number of virtual users. So I'm just trying to figure out if it's something about the way we're handling the sockets in the simulator, or some type of configuration on Weblogic. These are the types of messages I see in the log:
Tue Apr 18 16:48:13 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4803,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:13 EDT 2000: <ServletContext-Servlets> com.youcentric.servlet.LoginServlet: init
Tue Apr 18 16:48:13 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4806,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:13 EDT 2000: <ServletContext-Servlets> com.youcentric.servlet.LoginServlet: init
Tue Apr 18 16:48:15 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4815,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:15 EDT 2000: <ServletContext-Servlets> com.youcentric.servlet.LoginServlet: init
Tue Apr 18 16:48:21 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:37 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4816,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:42 EDT 2000:<W> <ListenThread> Connection rejected: Login timed out after 5000 msec. The socket came from [host=192.168.10.59,port=4817,localport=7001] See property weblogic.login.readTimeoutMillis.
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000:<E> <PosixSocketMux> connection reset on HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:47 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:51 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Tue Apr 18 16:48:51 EDT 2000: <PosixSocketMux> EOF on socket type HTTP
Thanks in advance,
Mike Gorman, Director of Architecture
YOUcentric, Inc.
Charlotte, NC
704-643-1000 x518
http://www.youcentric.com
Stuart Lawrence
Software Engineer
BEA WebXpress http://www.bea.com

Connection reset when uploading a report to ras server.

Hi,
We're running the jboss app in the linux box and use the java sdk to extract the crystal report with the ras on the remote window box. We got the below exception when extracting one of the crystal report. Any idea what's going on?
The trace log is also attached below.
Thanks,
Min
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: . - Connection reset-- Error code:-2147217387 Error code name:connectServer
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.TCPIPCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.do(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
crystalras_xxx_ras.log
TraceLog 2009 5 6 16:24:40.256 5892 5872 (.\dts\dts.cpp:961): CreateAgent: creating agent=8
TraceLog 2009 5 6 16:24:40.256 5892 5216 (\servers\ras\dtsagent\cdtsagent.cpp:2463): doOneRequest saRequestId_verifyLogon in
TraceLog 2009 5 6 16:24:40.865 5892 5216 (\servers\ras\dtsagent\cdtsagent.cpp:2465): doOneRequest saRequestId_verifyLogon out [NoError]
TraceLog 2009 5 6 16:24:40.865 5892 5872 (.\dts\dts.cpp:1000): RemoveKey: removing agent=8
TraceLog 2009 5 6 16:24:40.912 5892 5872 (.\dts\dts.cpp:961): CreateAgent: creating agent=9
TraceLog 2009 5 6 16:24:40.912 5892 3152 (.\dts\cdtsagent.cpp:717): doOneRequest caReservedRequestId_CreateServerAgent in
TraceLog 2009 5 6 16:24:40.928 5892 3152 (.\dts\cdtsagent.cpp:744): doOneRequest caReservedRequestId_CreateServerAgent out [NoError]
TraceLog 2009 5 6 16:24:43.319 5892 3152 (.\dts\cdtsagent.cpp:749): doOneRequest caReservedRequestId_CloseServerAgent in
TraceLog 2009 5 6 16:24:43.334 5892 3152 (.\dts\cdtsagent.cpp:757): doOneRequest caReservedRequestId_CloseServerAgent out [NoError]
TraceLog 2009 5 6 16:24:43.334 5892 5872 (.\dts\dts.cpp:1000): RemoveKey: removing agent=9
crystalras_xxx.log
Timestamp     ProcessID     ThreadID     Message
[Wed May 06 23:24:40 2009]     5892     5872     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:40.256 5892 5872 (.\dts\dts.cpp:961): CreateAgent: creating agent=8
[Wed May 06 23:24:40 2009]     5892     5216     trace message: XmlSerializer: before creating object
[Wed May 06 23:24:40 2009]     5892     5216     trace message: XmlSerializer: after creating object
[Wed May 06 23:24:40 2009]     5892     5216     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:40.256 5892 5216 (\servers\ras\dtsagent\cdtsagent.cpp:2463): doOneRequest saRequestId_verifyLogon in
[Wed May 06 23:24:40 2009]     5892     5216     (.\comexports.cpp:25): trace message: DllGetClassObject called.
[Wed May 06 23:24:40 2009]     5892     5216     (y:\servers\ras\rasauditing\classfactory.h:43): trace message: Getting instance of class factory.
[Wed May 06 23:24:40 2009]     5892     5216     (y:\servers\ras\rasauditing\classfactory.h:56): trace message: Got instance of class factory.
[Wed May 06 23:24:40 2009]     5892     5216     (y:\servers\ras\rasauditing\classfactory.h:115): trace message: Class factory QueryInterface called.
[Wed May 06 23:24:40 2009]     5892     5216     (y:\servers\ras\rasauditing\classfactory.h:99): trace message: Class factory addref'ed.
[Wed May 06 23:24:40 2009]     5892     5216     (y:\servers\ras\rasauditing\classfactory.h:131): trace message: Class factory QI succeeded..
[Wed May 06 23:24:40 2009]     5892     5216     (y:\servers\ras\rasauditing\classfactory.h:154): trace message: Attempting to create instance of COM component...
[Wed May 06 23:24:40 2009]     5892     5216     (y:\servers\ras\rasauditing\classfactory.h:178): trace message: Successfully created COM object.
[Wed May 06 23:24:40 2009]     5892     5216     (y:\servers\ras\rasauditing\classfactory.h:107): trace message: Class factory released.
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:1896): trace message: GetApslist: apsList size: 1
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:1897): trace message: GetApsListm_Members.GetCount()==1
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:1898): trace message: GetApsList m_InactiveMembers.GetSize()==0
[Wed May 06 23:24:40 2009]     5892     5216     (.\infostore.cpp:265): trace message: CInfoStore::Query: SELECT SI_SERVER_NAME,SI_CLUSTER_NAME,SI_SERVER_IS_ALIVE,SI_SERVER_IOR,SI_SYSTEM_INFO FROM CI_SYSTEMOBJS WHERE (SI_PARENTID = 16 AND SI_SERVER_KIND = 'aps') OR SI_ID = 4
[Wed May 06 23:24:40 2009]     5892     5216     trace message: CInfoStore::QueryEx() returned 2 objects with more to come? 0
[Wed May 06 23:24:40 2009]     5892     5216     trace message: CInfoSessionManager::GetApsListFromNS: APS MIN.SYMYVR.LOCAL is alive. Adding to active members
[Wed May 06 23:24:40 2009]     5892     5216     trace message: CInfoSessionManager::ClusterInfo::UpdateRegistry: Updating min.symyvr.local; to registry
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:1896): trace message: GetApslist: apsList size: 1
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:1897): trace message: GetApsListm_Members.GetCount()==1
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:1898): trace message: GetApsList m_InactiveMembers.GetSize()==0
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:1896): trace message: GetApslist: apsList size: 1
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:1897): trace message: GetApsListm_Members.GetCount()==1
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:1898): trace message: GetApsList m_InactiveMembers.GetSize()==0
[Wed May 06 23:24:40 2009]     5892     5216     trace message: Executing query SELECT SI_PRODUCT_VERSION FROM CI_SYSTEMOBJECTS WHERE SI_PARENTID = 26 AND SI_NAME = 'secEnterprise' to get auth properties
[Wed May 06 23:24:40 2009]     5892     5216     (.\infostore.cpp:265): trace message: CInfoStore::Query: SELECT SI_PRODUCT_VERSION FROM CI_SYSTEMOBJECTS WHERE SI_PARENTID = 26 AND SI_NAME = 'secEnterprise'
[Wed May 06 23:24:40 2009]     5892     5216     trace message: CInfoStore::QueryEx() returned 1 objects with more to come? 0
[Wed May 06 23:24:40 2009]     5892     5216     trace message: ClientPing_impl::add_session_handle: session handle (23793J9ujwvkFe3QPWTsv) added
[Wed May 06 23:24:40 2009]     5892     5216     (.\infosessionmgr.cpp:690): trace message: User: guest logged on
[Wed May 06 23:24:40 2009]     5892     5216     trace message: ClientPing_impl::remove_session_handle: remove session handle (23793J9ujwvkFe3QPWTsv). succeded=true
[Wed May 06 23:24:40 2009]     5892     5216     (.\proxy_impl.cpp:436): trace message: LOGOFF implicit session logoff: userId[11], m_uri[osca:iiop://MIN.SYMYVR.LOCAL/SI_SESSIONID=23793J9ujwvkFe3QPWTsv], sessionId[23793], m_sSessionHandle[23793J9ujwvkFe3QPWTsv]
[Wed May 06 23:24:40 2009]     5892     5216     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:40.865 5892 5216 (\servers\ras\dtsagent\cdtsagent.cpp:2465): doOneRequest saRequestId_verifyLogon out [NoError]
[Wed May 06 23:24:40 2009]     5892     5872     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:40.865 5892 5872 (.\dts\dts.cpp:1000): RemoveKey: removing agent=8
[Wed May 06 23:24:40 2009]     5892     5872     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:40.912 5892 5872 (.\dts\dts.cpp:961): CreateAgent: creating agent=9
[Wed May 06 23:24:40 2009]     5892     3152     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:40.912 5892 3152 (.\dts\cdtsagent.cpp:717): doOneRequest caReservedRequestId_CreateServerAgent in
[Wed May 06 23:24:40 2009]     5892     3152     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:40.928 5892 3152 (.\dts\cdtsagent.cpp:744): doOneRequest caReservedRequestId_CreateServerAgent out [NoError]
[Wed May 06 23:24:43 2009]     5892     3152     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:43.319 5892 3152 (.\dts\cdtsagent.cpp:749): doOneRequest caReservedRequestId_CloseServerAgent in
[Wed May 06 23:24:43 2009]     5892     3152     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:43.334 5892 3152 (.\dts\cdtsagent.cpp:757): doOneRequest caReservedRequestId_CloseServerAgent out [NoError]
[Wed May 06 23:24:43 2009]     5892     5872     (.\dts\dts.cpp:1793): trace message:
TraceLog 2009 5 6 16:24:43.334 5892 5872 (.\dts\dts.cpp:1000): RemoveKey: removing agent=9
Edited by: limin9 on May 7, 2009 1:29 AM
Edited by: limin9 on May 7, 2009 1:30 AM

I tried to put the debug information in java code by applying clientSDKOptions.xml. And I found the report file is cut off when being passed to ras. I'm wondering if there is any file size limitation to use ras api?

SSL: Connection reset by peer ; Failed to enable crypto error while calling the report using bing API with SOAP client

Hi,
I am trying to fetch report using bing API and making a SOAP call for fetching the data. I get the following error:
[Warning] fopen(): SSL: Connection reset by peer [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
02-04-2015 10:17:41 (BST) : [Warning] fopen(): Failed to enable crypto [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
02-04-2015 10:17:41 (BST) : [Warning] fopen(https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=rzr63XFt5qJduddohoIRyOYAP%2f1%2ftsnhk8L%2bzBmUpdU2CQlcUB98RpY%2bbOaLFFGMqAC4IUUadC%2fNdNnJqeVCY%2f%2bpy6noVsVA%2fMJp47a3Xb1VjABfKhcdKy6vqpgEdcQg%2fQZ7QcEpZ3bEloJjUtGpDquFk53BnkeHEPVWZkDYcsQegRz%2fpG4t4w6gKCCRmhArd6osr6ZU9CMJ3lbxtGXjcQEMPvP2apNyr9P%2fc8niyfWA2aBcm1aEmOLX2KL3aRJ4rz9N7gG7uBslVZH%2b4rUjHdB7CMkbb%2fHyHwvPTqGPbPCHnicefr%2b%2fDP70hlkBEGfyOOswK67%2bl1zh7CyIv%2bcMlaDsuDX1HeFf4uORfD41H1z7):
failed to open stream: operation failed [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
Whenever I execute my script. Can you please let me know what we can do to solve this issue. The version of PHP we are using is 5.3.3 with open ssl.

Hi Shobha,
I can't confirm what version of PHP you are using, but to err on the side of caution please use the version specified in the sample/SDK:
PHP 5.4.14 has been installed from PHP.
Here is our code examples:
https://msdn.microsoft.com/en-US/library/bing-ads-overview-getting-started-php-with-web-services.aspx
Thanks,
Itai

Connection reset error while calling web service deployed on tomcat

Hello Friends,
I am trying to invoke a web service from web dynpro application. The web service is deployed on tomcat 5.5 server.
I am creating an adaptive web service model using wsdl file. The model gets created without any error.
But when application is deployed and run it is giving following exception:
java.net.SocketException: Connection reset
 at java.net.SocketInputStream.read(SocketInputStream.java:168)
 at java.io.BufferedInputStream.read1(BufferedInputStream.java:254)
 at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
 at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
 at java.io.BufferedInputStream.read1(BufferedInputStream.java:256)
 ... 102 more
I tried to call the service from a simple java application. There the service works fine.
Also, in the web services navigator, if I specify the wsdl url for testing it gives the same error of "Connection reset".
I don't think this is a proxy server issue as the tomcat is within the local network.
Can someone please help me with this?
Thanks and regards,
Mayuresh
Edited by: Mayuresh Kanvinde on Mar 27, 2008 7:03 PM

Hi Sumit,
Thanks for the reply.
Here is the stack trace:
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL 'http://<host>:<port>/WebServicesTest/DummyWebService?wsdl' and service factory configuration 'null'
 at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:422)
 at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:372)
 at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:342)
 at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:326)
 at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo$Cache.getModelInfo(WSModelInfo.java:199)
 at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:1035)
 at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getModelInfoFromCacheOrCreate(WSModelInfo.java:248)
 at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModel.<init>(WSTypedModel.java:41)
 at com.tcs.vis.Vishy.<init>(Vishy.java:73)
 at com.tcs.app.AppView.wdDoInit(AppView.java:101)
 at com.tcs.app.wdp.InternalAppView.wdDoInit(InternalAppView.java:143)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
 at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
 at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
 at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
 at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
 at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
 at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
 at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
 at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:150)
 at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:50)
 at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:71)
 at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:91)
 at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:420)
 ... 45 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Problem with WSDL file parsing. See nested message.
 at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:182)
 at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:147)
 ... 49 more
Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Connection reset -> java.net.SocketException: Connection reset
 at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1039)
 at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadWSDLDocument(WSDLDOMLoader.java:1126)
 at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:178)
 ... 50 more
Caused by: java.net.SocketException: Connection reset
 at java.net.SocketInputStream.read(SocketInputStream.java:168)
 at java.io.BufferedInputStream.read1(BufferedInputStream.java:220)
 at java.io.BufferedInputStream.read(BufferedInputStream.java:277)
 at java.io.BufferedInputStream.read1(BufferedInputStream.java:220)
 at java.io.BufferedInputStream.read(BufferedInputStream.java:277)
 at com.sap.engine.services.webservices.jaxm.soap.LimitedInputStream.read(LimitedInputStream.java:61)
 at com.sap.engine.lib.xml.parser.readers.EncodedDataReader.readData(EncodedDataReader.java:269)
 at com.sap.engine.lib.xml.parser.readers.EncodedDataReader.fetchData(EncodedDataReader.java:332)
 at com.sap.engine.lib.xml.parser.readers.EncodedDataReader.read(EncodedDataReader.java:165)
 at com.sap.engine.lib.xml.parser.helpers.AdvancedXMLStreamReader.read(AdvancedXMLStreamReader.java:143)
 at com.sap.engine.lib.xml.parser.helpers.AdvancedXMLStreamReader.addInputFromInputStream(AdvancedXMLStreamReader.java:292)
 at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:220)
 at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
 at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160)
 at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261)
 at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
 at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
 at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
 at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
 at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1023)
 ... 52 more
Thanks and regards,
Mayuresh
Edited by: Mayuresh Kanvinde on Mar 28, 2008 1:10 PM

Io Excpetion Connection Reset In OWB Mapping

Hi,
While executing a mapping in OWB i am getting an error Io Exception Connection Reset.
This happens when execution of mapping involves more than 50 lakhs of records.
Please any one can help.

You say: "But the connection is taking more than expected time".
So I am think of a network issue. Check the DNS and/or entries in the HOSTS file if they are according to the prereqs.
Eric

Connection Reset issue in Weblogic 8.1

Hi,
We have an application running on weblogic 8.1. Please let men explain the steps that we carried out:
1. A new user was being enrolled through the applciation.
2. To make the connection object the value of the properties DriverClass, ConnectionURL, UserId and Password was obtained from the config.xml.
3. preparedStatement.executeUpdate() inserted data in the database.
This works fine initially but when i leave the system idle for an hour or so and then try to access the application we get an error:
java.sql.SQLException: Io exception: Connection reset
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.ttc7.TTC7Protocol.handleIOException(TTC7Protocol.java:3675)
at oracle.jdbc.ttc7.TTC7Protocol.open(TTC7Protocol.java:618)
at oracle.jdbc.driver.OracleStatement.open(OracleStatement.java:575)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2803)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:608)
at workout.security.weblogic.realm.rdbms.RDBMSDelegate.addGroupMember(RDBMSDelegate.java:757)
at workout.security.weblogic.realm.rdbms.RDBMSRealm.addGroupMember(RDBMSRealm.java:446)
at workout.security.weblogic.RDBMSSecurityRealm.add(RDBMSSecurityRealm.java:84)
at workout.util.LDAPClientHelper.add(LDAPClientHelper.java:39)
at workout.ejb.Enrollment.EnrollmentBean.enroll(Unknown Source)
at workout.ejb.Enrollment.Enrollment_q1qync_EOImpl.enroll(Enrollment_q1qync_EOImpl.java:206)
at workout.ejb.Enrollment.Enrollment_q1qync_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:166)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
at workout.ejb.Enrollment.Enrollment_q1qync_EOImpl_812_WLStub.enroll(Unknown Source)
at workout.beans.UserProfile.enroll(Unknown Source)
at jsp_servlet._customer_service._consumer_enrollment.___processall._jspService(___processall.java:1524)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
After some more attempts the system appears to work fine.
If anyone can advise then it will be of great help.
Thanks & Regards
Neeraj Kanodia

For those interested, I have some updates on this subject and someone out there sent me a mail asking if I ever found anything out.
Basically, when I encountered this issue the first time, I was working on a SP2 Portal. We were having numerous small bugs like this one with SP2 that centered around the back button or refresh button. BEA gave us a "super patch" back in July or so that when applied to our SP2 project, fixed our issue. I have sense moved onto SP3, and I did not see the compression issue (so I think SP3 must have the patches correctly setup...like I would assume it would).

Microsoft Remote Desktop displaying "Connection Reset by Peer"

Server Side Configuration:
RDS Gateway Server: MS Server 2008 R2
RDS Web Server: MS Server 2012 R2 Standard
RDS Server: MS Server 2008 R2
Client Side Configurations:
Dell OptiPlex 9020: MS Windows 7 Enterprise with MS RDC [will refer to as DELL]
Apple iPad Air: IOS 7.1 with MRD 8.0.5.24403 [will refer to as IPAD]
Apple MacBook Pro Retina: OS X 10.9.2 with MRD 8.0.5 (Build 24428) [will refer to as MAC]
First off, this setup is in production and has been working great for all our remote users internally and externally for more then a year. This is our first Apple client to try and connect. I'm pretty sure it's not the server side of things.
I have tested all three client setups decried above on the same internal network and form the same external Internet connection.
The DELL and IPAD connect both internally and externally. The MAC will not connect internally or externally. The error box that is displayed simply states "connection reset by peer."

[2014-Mar-17 10:20:46] RDP (0): en0 af=2 (AF_INET) addr=192.168.113.147 netmask=255.255.255.0
[2014-Mar-17 10:20:46] RDP (0): en1 af=18 addr= netmask=
[2014-Mar-17 10:20:46] RDP (0): en2 af=18 addr= netmask=
[2014-Mar-17 10:20:46] RDP (0): bridge0 af=18 addr= netmask=
[2014-Mar-17 10:20:46] RDP (0): p2p0 af=18 addr= netmask=
[2014-Mar-17 10:20:46] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-17 10:20:46] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-17 10:20:46] RDP (0): client version: 8.0.24428
[2014-Mar-17 10:20:46] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-17 10:20:51] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-17 10:20:51] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-17 10:20:51] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-17 10:20:51] RDP (0): lo0 af=18 addr= netmask=
[2014-Mar-17 10:20:51] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-17 10:20:51] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-17 10:20:51] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-17 10:20:51] RDP (0): gif0 af=18 addr= netmask=
[2014-Mar-17 10:20:51] RDP (0): stf0 af=18 addr= netmask=
[2014-Mar-17 10:20:51] RDP (0): en0 af=18 addr= netmask=
[2014-Mar-17 10:20:51] RDP (0): en0 af=30 (AF_INET6) addr=fe80::7a31:c1ff:febb:5fc%en0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-17 10:20:51] RDP (0): en0 af=2 (AF_INET) addr=192.168.113.147 netmask=255.255.255.0
[2014-Mar-17 10:20:51] RDP (0): en1 af=18 addr= netmask=
[2014-Mar-17 10:20:51] RDP (0): en2 af=18 addr= netmask=
[2014-Mar-17 10:20:51] RDP (0): bridge0 af=18 addr= netmask=
[2014-Mar-17 10:20:51] RDP (0): p2p0 af=18 addr= netmask=
[2014-Mar-17 10:20:51] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-17 10:20:51] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Mar-17 10:20:51] RDP (0): client version: 8.0.24428
[2014-Mar-17 10:20:51] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-17 10:20:51] RDP (0): Resolved 'gw.glennburdette.com' to '71.93.34.165' using NameResolveMethod_DNS(1)
[2014-Mar-17 10:20:51] RDP (0): Resolved 'gw.glennburdette.com' to '71.93.34.165' using NameResolveMethod_DNS(1)
[2014-Mar-17 10:20:51] RDP (0): Error message: Connection reset by peer
[2014-Mar-17 10:20:51] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-17 10:20:51] RDP (0): Error message: Connection reset by peer
[2014-Mar-17 10:20:51] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Mar-17 10:21:01] RDP (0): Final rdp configuration used: redirectcomports=1
server port=3389
use multimon=1
promptcredentialonce=1
authentication level=2
full address=rds.gbpb.local
session bpp=32
prompt for credentials on client=1
redirectprinters=1
drivestoredirect=
gatewayusagemethod=2
alternate full address=rds.gbpb.local
workspace id=RDWEB.gbpb.local
allow font smoothing=1
redirectposdevices=0
gatewaycredentialssource=0
devicestoredirect=*
redirectsmartcards=1
redirectclipboard=1
gatewayprofileusagemethod=1
gatewayhostname=gw.glennburdette.com
[2014-Mar-17 10:21:01] RDP (0): Final rdp configuration used: gatewayhostname:s:gw.glennburdette.com
screen mode id:i:2
use multimon:i:1
session bpp:i:32
full address:s:rds.gbpb.local
audiomode:i:0
username:s:
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com:1
bookmarktype:i:3
use redirection server name:i:0

HTTP response error :Connection reset

Hi all,
I am getting following error in log while sending message to the trading partner and the main problem is that once this error comes then after that I am not able to send any more message to any of my Trading Partners. Even if I try to send message to any other Trading Partner, nothing comes in the B2B log and report as well. After restarting the B2B I am able to send message again to other Trading Partners.
Can anyone please tell the reason for getting this error? I also want to know that after getting this error once, why am I not able to send message to any Trading Partner?
2008.12.12 at 06:41:07:647: Thread-13: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1006
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:627)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:980)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1744)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sun.net.ssl.internal.ssl.InputRecord.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.InputRecord.read(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
at java.io.ByteArrayOutputStream.writeTo(ByteArrayOutputStream.java:112)
at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:3018)
at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java:2843)
at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:2635)
at HTTPClient.HTTPConnection.Post(HTTPConnection.java:1107)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:590)
... 8 more
2008.12.12 at 06:41:07:647: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2008.12.12 at 06:41:07:648: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Enter
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Leave
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset
2008.12.12 at 06:41:07:651: Thread-13: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
2008.12.12 at 06:41:07:652: Thread-13: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2008.12.12 at 06:41:07:658: Thread-13: B2B - (DEBUG) Engine:notifyApp Enter
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0AF77A6111E29ED374E000001BDE3D60</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset</errorText>
<errorDescription>
<![CDATA[Machine Info: (dys094w004)
Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.12.12 at 06:41:07:692: Thread-13: B2B - (DEBUG) Engine:notifyApp Exit
2008.12.12 at 06:41:07:693: Thread-13: B2B - (DEBUG) DBContext commit: Enter
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Transaction.commit()
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Leave
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2008.12.12 at 06:41:07:696: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Please help.
Thanks & Regards,
Anuj Dwivedi

Hi Sinkar,
Thanks for the reply. I confirmed it with my Trading Partner and their server is not running but still I want to know that why am I not able to send message to any other Trading Partner after getting this error once. And if I restart the server, it again acts normally and I am able to send message to other Trading Partners.
SSL is configured properly because I was able to communicate with this Trading Partner earlier when their server was up.
We are working on 10.1.2.3.0 with 7457066 MLR 5 patch. Please guide if any other patch required.
Thanks for the help.
Warm Regards,
Anuj Dwivedi

Error processing request in sax parser...Excepciu00F3n de E/S: Connection reset

Hello,
I've RFC to JDBC interface.
Sometimes in the RWB me the following error message,
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'LISMATWQ' (structure 'STATEMENT'): java.sql.SQLException: Excepción de E/S: Connection reset</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
How can I prevent?
Thanks very much,

Hello,
the error does not always appear, sometimes the interface works well and others do not (even when the data are the same) I find no solution to this error,
anyone have any idea?
thanks very much

ACE - Connection Reset

Similar Messages

Maybe you are looking for