ACE health monitoring queries

Hi,
I need some detailed information regarding ACE health monitoring. According to the documentation, ACE support 4096 Unique probe configurations.
My questions are as follows:
1) Are these uniques configs means uniques instances or unique probes. For ex: If I have created 2 probes(say http and icmp probe) and have applied each of it to 5 rservers, does that mean I have 2 unique configs or 10.
2) How did this number(4096) came in. What is the logic behind it. Is it based on the memory allocated by ACE to health monitoring. Please provide a detailed answer to this question.
Any inputs will be highly valuable for me.
Thanks,
Nitesh

There are three different types of probe limits in ACE
1.Probe definitions (4K)
These are the actual number of probe objects that you can define.
You can define maximum of 4K unique probes.
2.probe Instances (16K)
Each time that you use the same probe again in a different serverfarm/Real
the ACE counts it as another probe instance. You can allocate a maximum of 16k probe instances.
3.Simultaneous Probe Sockets (2500)
With ACE 2.x code Probes can open 2500 simultaneous connections from the control
plane. In Older ACE module codes and on ACE appliance this limit i 1000.
Reason for these probe definitions & Probe instances are the Control plane capacity.
These limitations exist to make sure that Probes do'nt starve the other process
Hope this helps
Syed Iftekhar Ahmed

Similar Messages

ACE 4710 - Inline Health Monitoring

Hi!
Has anyone tested if you can use inband health monitoring on the ACE to detect a failed server, remove it from loadbalancing and then use an active probe to put it back in service as soon as it is online again? Will it work? Or is "resume-service seconds" the only way to automatically recover from INBAND-HM-FAILED?
KR Robert

I guess reverting back to a standard probing when a server is marked failed is the default behavior. In fact it can't work in any other way.

Https health monitor not working on ACE.

Hello Guys,
Hope you are all doing well, i need some help in setting up my https health monitor for real servers.
I am configuring it on ACE appliance 4710 but the probe appears failing.
The VIP is listening on port 443 and 8080, the cert is not uploaded to ACE but eventually it will be on ACE so SSL will terminate on ACE but not at the minute.
The user don't want to enable port 80 on server so will need https health probe configuring. Following is my config for https health probe but it is failing.
probe https SSDSD-ServerAvailability-443
interval 5
passdetect interval 5
ssl version all
request method head url //ssdsd/servlet/SDLogin
expect status 200 200
As per my knowledge https is also an http probe but encrypted. Please see the detailed output below and let me know if i am missing anything.
probe       : SSDSD-ServerAvailability-443
type        : HTTPS
state       : ACTIVE
description :
   port      : 443          address   : 0.0.0.0
   addr type : -            interval : 5       pass intvl : 5
   pass count: 3            fail count: 3       recv timeout: 10
   SSL version      : All
   SSL cipher       : RSA_ANY
   http method      : HEAD
   http url         : //ssdsd/servlet/SDLogin
   conn termination : GRACEFUL
   expect offset    : 0         , open timeout     : 1
   regex cache-len : 0
   expect regex     : -
   send data        : -
                ------------------ probe results ------------------
   associations     ip-address         port porttype probes failed passed health
   ------------ ----------------------+----+--------+------+------+------+------
   serverfarm : SSDSD_SF
     real      : SSDSD-AL2[0]
                        192.168.225.26 443 VIP     48611 1834   46777 FAILED
   Socket state        : CLOSED
   No. Passed states   : 1         No. Failed states : 2
   No. Probes skipped : 1         Last status code : 302
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : Received invalid status code
   Last probe time     : Mon Nov 11 04:05:10 2013
   Last fail time      : Mon Nov 11 02:10:00 2013
   Last active time    : Fri Nov 8 09:09:31 2013
                        192.168.225.26 8080 VIP     48613 48613 0      FAILED
   Socket state        : CLOSED
   No. Passed states   : 0         No. Failed states : 1
   No. Probes skipped : 0         Last status code : 0
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : Connection reset by server
   Last probe time     : Mon Nov 11 04:05:14 2013
   Last fail time      : Fri Nov 8 08:34:10 2013
   Last active time    : Never
     real      : SSDSD-AL3[0]
                        192.168.225.27 443 VIP     48612 1817   46795 FAILED
   Socket state        : CLOSED
   No. Passed states   : 1         No. Failed states : 2
   No. Probes skipped : 0         Last status code : 302
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : Received invalid status code
   Last probe time     : Mon Nov 11 04:05:10 2013
   Last fail time      : Mon Nov 11 02:10:00 2013
   Last active time    : Fri Nov 8 09:09:31 2013
                        192.168.225.27 8080 VIP     48613 48613 0      FAILED
   Socket state        : CLOSED
   No. Passed states   : 0         No. Failed states : 1
   No. Probes skipped : 0         Last status code : 0
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : Connection reset by server
   Last probe time     : Mon Nov 11 04:05:12 2013
   Last fail time      : Fri Nov 8 08:34:08 2013
   Last active time    : Never
PHH104-N3-ACE-1/N3#
I am confused with the last status code which shows 302 any help from your side will be a life line for me.
Regards,
Amjad Hashim.

Hi Amjad,
I see the last disconnect err: "Received invalid status code" which means that ACE is not getting what is expected (code 200) for it to mark the server as passed.
Also, i see you have configured url "request method head url //ssdsd/servlet/SDLogin", why are you using two slashes "//", can you try with only one?
Also, if you configure probe on TCP PORT 443 does it pass? I see last disconnect err: connection reset by server as well and that could be due to the fact that service was there on server. Looks unlikely since above probes failed due to wrong status code which means that SSL handshake happened.
You can take a pcap on server as well as ACE to see what is going on. You might need to use private key to decrypt the captures if the failure is after SSL handshake has completed to see what status code server is sending. You can also use TCP 443 based probe as workaround till you can arrange pcaps and figure out what is wrong.
Regards,
Kanwal

Did you have Cloud start failures or a missing health monitor?

Calling all CQ Cloud'ers.
Hi, My name is Gary Gilchrist. I work with the engineering team for Adobe CQ Cloud.
Today I was running some diagnostics on our site. I see that there are a lot of you out there who have got as far as starting your own CQ Cloud. Congratulations!
But I also see a number of Clouds that have been attempted to be started by different tenants (that's you :)) and never made it as far as the "running" state. There are sometimes good reasons for this, sometimes related to configuration of your Amazon AWS key information. But we're still in Beta and I must admit, we know of a few bugs we still need to iron out.
I also see that some Clouds were started successfully, yet I do not see the automatic health monitoring that we record for your Cloud. We do that after a Cloud starts so that you can see the CPU, Memory and Disk health of your CQ instances running in your Cloud. You should see this as little green bars in your Cloud detail page.
I have two questions:
Did you attempt to start a Cloud (and you believe your AWS credential is valid) yet it failed to completely start up?
Did you start a Cloud successfully, yet you continued to see "unavailable" (gray bar) as the heath status for ALL the CQ instances in your Cloud? (please note that health monitoring for the Dispatcher is not working. It will fixed with our next update to the site, coming shortly).
If you did encounter 1 or 2 above please drop a reply on this thread giving only the name of your Cloud (no other personal information necessary) plus anything else you think is useful. We would like to look into it.
Thanks from the whole team here at Adobe for trying out CQ Cloud!
Gary.

1. Cloud start failure, cloud name: cf
I attached more details about the failure in thread Unable to start the cloud

Satellite P855-108 - PC health Monitor fails to update - Windows 8.1 update

Hello,
today updated to win 8.1 from a one year old windows 8, everything went fine
Then I followed Toshiba recommendations for updating the tools but despite doing exactly as explained the flash cards(and the functions buttons) are not functioning, they worked perfectly in win 8!
_The only utility that fails to update is PC health monitor,_ the version installed is 1.9.04.6402 and the one from support site for win 8.1 is 1.9.09.6400, when trying to install it fails with error message "not support"
When trying to open the installed health monitor there is also an error message "can`t get the bios type".
This is strange and every other utility recognizes the latest bios version 6.70 an the laptop`s details an serial
I tried all I could think about, installed flash card support tool from win 8, enabling and disabling in the bios, even installed VAP for win 8 but no change
Any help would be highly appreciated
Latest system driver and other tools are installed
Thanks in advance

Sorry for taking space on the forum,
_In case anyone is facing the same problem I managed to find a solution by my self,_
*it was caused by the old version of PC health monitor,*
uninstalled, updated to latest version
Now Function key utility and everything works as supposed, _the latest Health monitor also works fine_

Toshiba PC Health Monitor Compatibility Issues in Windows 8.1

Hi all,
I have just recently upgrading from Windows 8 to Windows 8.1
I noticed that the Toshiba PC Health Monitor does not work anymore. Are any of you experiencing this issue?

Here an thread about the same theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=73594
Uninstall the previous Health Monitor version and install newest available version from Toshiba driver page

Health Monitoring. DBMS_HM issue.

Hi,
I am using ORACLE DATABASE 11g R2 (11.2.0.3) and Linux OS.
I was trying to monitor my database proactively(manually) using the package DBMS_HM. I referred the following link :-
DBMS_HM
and many others also but I am not able to get a clear understanding of the topic.
When i try to run_check 'Data Block Integrity Check' :-
{code}
DBMS_HM.RUN_CHECK('Data Block Integrity Check',
                    'DBIC',
                    'BLC_DF_NUM=1;BLC_BL_NUM=23456');
{code}
I got error :-
{code}
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
{code}
As per the documentation this should have worked.
I checked the data-dictionary views
{code}
SELECT a.* FROM v$hm_check_param a, v$hm_check b
WHERE a.check_id = b.id
AND b.name = 'Data Block Integrity Check';
8    BLC_DF_NUM    3    DBKH_PARAM_UB4         0    File number
9    BLC_BL_NUM    3    DBKH_PARAM_UB4         0    Block number
{code}
Can anybody help me with this problem ? else please provide me any good link to study database health monitoring in detail.
Thanks in advance.

Where is the third parameter I mean time out.. ?
I tried this and it worked..
DBMS_HM.RUN_CHECK('Data Block Integrity Check', 'ABCDE', 60, 'BLC_DF_NUM=1;BLC_BL_NUM=23456');
Cheers,
Manik.

Satellite L500-1XD - cannot find an update for PC health monitor

This TBS advises updates to PC health monitor and HDD/SDD alert.
HDD/SDD alert has a published update in the relevant downloads section but I cannot find an update for PC health monitor.
Any one got any bright ideas ?
Otherwise this seems quite a balanced system.

Hi Paolo30,
Thanks for your contribution. I agree with your model designation
I would like to download ver 1.5.6.0 but it does not seem to be listed on the download list (Two and a quarter pages long) for the L500-1XD on the Toshiba-Europe website. I am using I.E.8
Where are you seeing this listed ? Could you give me a URL please ?
It is an important update as it resolves a conflict between video streaming from HD and SMART HD messages as described in the TSB.
The only upgrade that is tagged as 1.5.6.0 is the Bullitin Board and this does not sound like the correct type of application. There was obviously a major update on 21/6/2010 there are 30 odd updates with that date.
Kindest Regards

Cluster Health Monitor/crfgui

Hi all,
After successful installation of CHM I cannot connect to my cluster via crfgui tool (from Windows
to Linux).
Cannot connect to Loggerd on "scan-name".
.. reason: Connection context invalid .. Pooling for connection to Loggerd on "scan-name".
Please help
P.S I already read the
"http://levipereira.wordpress.com/2011/07/19/monitoring-the-cluster-in-real-time-with-chm-cluster-health-
monitor/"
thanks Levi :)
and my G.I version is 11.2.
OS OEL5.7
*[root@rac2 rac2]# /etc/init.d/init.crfd status*
OSysmond running with PID=3327.
OLoggerd running with PID=3552.
oproxyd running with PID=3639.
*[root@rac2 rac2]# netstat -anp | grep 3639*
tcp 0 0 192.168.7.68:61027 0.0.0.0:* LISTEN 3639/oproxyd
udp 0 0 127.0.0.1:36850 0.0.0.0:* 3639/oproxyd
udp 0 0 127.0.0.1:20909 0.0.0.0:* 3639/oproxyd
unix 2 [ ACC ] STREAM LISTENING 15016 3639/oproxyd /var/tmp/.oracle/srac2DBG_PROXY
unix 3 [ ] STREAM CONNECTED 15015 3639/oproxyd

Hi,
The GUI (released only to 11.2.0.1) is independent of the CHM version shipped with Oracle Grid Infrastructure. However and right now, there is unfortunately no ETA when the GUI will be available for the integrated CHM 11.2.0.2 or higher (11.2.0.3 for example, once out). The GUI is optional as far as CHM and its purpose is concerned, although it is useful.
What's command line you are using to connect GUI on your CHM? Your are using Public IP or SCAN IP?
Levi Pereira

Administration Utilities - System Health Monitor - alui 6.1

I'm curious if there is a way I can turn the System Health Monitor utility into a portlet?
It seems like there should an easy way to do this, but I can't seem to find it. Any insight you might be able to provide on either the System Health Monitor or the administration utilities. Or anything that might help for that matter, would be be most appreciated.
Thanks,
-Kevin

Hi geoffgarcia, thanks for looking into my question. I have tried to pass the existing URL back in, as you have suggested, but with no luck. For example:
> Create new Web Service : URL : http://[MYPORTALSERVER]/portal/server.pt?open=space&name=diagnostic&psname=ObjMgr&psid=3&cached=true&control=EditorStart&editorType=10
and then generate a portlet to that service. When I add that portlet to my homepage it throws a
"Error Error - The server has experienced an error. Try again or contact your portal administrator if you continue experiencing problems."
error, but doesn't log the error. View source shows the error to be
"Current User does not have sufficient permission to object with id = 52: com.plumtree.server.marshalers.PTException.... blah blah blah...."
Any ideas? Maybe I'm missing a glaringly obvious setting/configuration?
Thanks again,
-Kevin

Alerts subtab is missing Cannot find the Health Monitoring add-in

I'm running a Windows Server 2012 R2 with Essentials Services. I ended up switching domains with this server. I completely uninstalled Essentials server and all the dependent components with no reported errors.
I reinstalled everything with no errors. Now when I go to the dashboard I'm getting the following errors.
Alerts subtab is missing - Title
Cannot find the Health Monitoring add-in. Please verify and make sure that the add-in is correctly installed.
I tried uninstalling and re-installing Essentials a couple of times but with no luck.
Is there a way to repair this problem without wiping everything and starting over?
James Glenn

Below is what I found in the logs that seemed pertinent.
Those Dlls are there. I'm wondering if its a security issue?
[10344] 150206.045938.2075: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.2075: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Computers.ComputersPage, ComputersUIAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.2075: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Computers.ComputersPage, ComputersUIAddin
[10344] 150206.045938.2085: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Computers\computers.addin
[10344] 150206.045938.2095: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\GroupPolicyComputersTabExtender.dll: Cannot find the requested object.
[10344] 150206.045938.2105: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.2105: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.MailService.Addin.MobileDevice.MobileDeviceListPage, MobileDevicesAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.2185: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.MailService.Addin.MobileDevice.MobileDeviceListPage, MobileDevicesAddin
[10344] 150206.045938.2185: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Computers\mobiledevices.addin
[10344] 150206.045938.2575: GroupPolicy: CreateColumns entered
[10344] 150206.045938.2575: GroupPolicy: CreateColumns adding column
[10344] 150206.045938.2575: GroupPolicy: CreateColumns end
[10344] 150206.045938.2715: Dashboard.Forms: List view created
[10344] 150206.045938.2815: Dashboard.Forms: Details pane created
[10344] 150206.045938.3305: Dashboard.Forms: Creating TabPage for node D730AA04-07B1-4b9c-9DED-CCB0A723A8EB with display name "STORAGE" for TabControl
[10344] 150206.045938.3475: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Folders.dll: Cannot find the requested object.
[10344] 150206.045938.3525: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Drives.dll: Cannot find the requested object.
[10344] 150206.045938.3645: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\OIMAddin.dll: Cannot find the requested object.
[10344] 150206.045938.3715: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Folders.dll: Cannot find the requested object.
[10344] 150206.045938.3755: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Drives.dll: Cannot find the requested object.
[10344] 150206.045938.3855: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\OIMAddin.dll: Cannot find the requested object.
[10344] 150206.045938.4675: StorageOM: StorageBacked created successfully.
[10344] 150206.045938.4675: StorageOM: Set connection identifier to 1
[15084] 150206.045938.4795: StorageOM: Getting storage data from server
[10344] 150206.045938.5025: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5025: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5025: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders
[10344] 150206.045938.5025: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverfolders.addin
[10344] 150206.045938.5035: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5035: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5035: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives
[10344] 150206.045938.5035: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverharddrives.addin
[10344] 150206.045938.5045: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5045: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5045: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin
[10344] 150206.045938.5045: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\SharePointLibraryTabPage.addin
[10344] 150206.045938.5055: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5055: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5055: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders
[10344] 150206.045938.5055: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverfolders.addin
[10344] 150206.045938.5065: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5065: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5065: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives
[10344] 150206.045938.5065: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverharddrives.addin
[10344] 150206.045938.5075: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5075: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5075: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin
[10344] 150206.045938.5075: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\SharePointLibraryTabPage.addin
[10344] 150206.045938.5375: Dashboard.Forms: List view created
[10344] 150206.045938.5475: Dashboard.Forms: Details pane created
[10344] 150206.045938.6575: StorageOM: StorageBacked created successfully.
[10344] 150206.045938.6575: StorageOM: Set connection identifier to 1
[10344] 150206.045938.6675: DeploymentCommon: Failed to open deployment registry: StorageSpacesHidden
[10344] 150206.045938.6675: Exception:
An exception of type 'Type: System.IO.IOException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 02/06/2015 04:59:38
Message: The specified registry key does not exist.
Stack: at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.GetValueKind(String name)
at Microsoft.WindowsServerSolutions.Common.DeploymentCommon.GetBooleanDeploymentData(String name, Boolean defaultValue)
[15084] 150206.045938.6735: StorageOM: Getting storage data from server
[10344] 150206.045938.6875: Dashboard.Forms: List view created
[10344] 150206.045938.6975: Dashboard.Forms: Details pane created
[10344] 150206.045938.7605: Dashboard.Forms: Creating TabPage for node AE5C17D3-0404-4d55-B638-CD22AB727070 with display name "APPLICATIONS" for TabControl
[10344] 150206.045938.7785: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\AddinAlerts.dll: Cannot find the requested object.
[10344] 150206.045938.7825: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\PinPointAddin.dll: Cannot find the requested object.
[10344] 150206.045938.8845: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\AddinAlerts.dll: Cannot find the requested object.
[10344] 150206.045938.8855: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\PinPointAddin.dll: Cannot find the requested object.
[10344] 150206.045939.0305: Dashboard.Forms: List view created
[10344] 150206.045939.0335: Dashboard.Forms: No IDetailContent was given; no need to create details pane
[10344] 150206.045939.4216: Dashboard.Forms: Creating TabPage for node 3ebe6ef4-03bb-4b7c-bf5a-9f2b4890e619 with display name "OFFICE 365" for TabControl
[10344] 150206.045939.4596: Dashboard.Forms: TabControl created. Name: PrimaryTabs, Tab count: 5
[10344] 150206.045939.6106: Dashboard.Forms: Page selected: ffc2b311-08ca-4200-9719-bf0119740eba
[10344] 150206.045939.9996: IDENTITY: ReloadUsersOnce
[25400] 150206.045941.1807: PfBinding: Information: [0] : Adding service dns identity [EDGE-ES] in proxy endpoint.
[25400] 150206.045941.2327: OPEUserListProviderAdorner: OPE is not enabled. no need to refresh.
[5764] 150206.045946.6732: AlertFramework: Subcomponent: Helper > Timeout value is invalid, using default service start timeout
[22312] 150206.045947.6803: OPEUserListProviderAdorner: OPE is not enabled. no need to refresh.
[10344] 150206.045947.8243: StorageOM: folder is not in correct state, so could not open False Healthy
[10344] 150206.045947.8273: StorageOM: folder is not in correct state, so could not open False Healthy
[10344] 150206.045947.8603: DeploymentCommon: Failed to open deployment registry: ServerBackupDisabled
[10344] 150206.045947.8603: Exception:
An exception of type 'Type: System.IO.IOException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 02/06/2015 04:59:47
Message: The specified registry key does not exist.
Stack: at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.GetValueKind(String name)
at Microsoft.WindowsServerSolutions.Common.DeploymentCommon.GetBooleanDeploymentData(String name, Boolean defaultValue)
James Glenn

Biztalk Health Monitor for BTS 2010

Hi,
Just moving through the blogs on MSDn, I found out that BHM tool is now available for BTS 2010, my question is do we have to pay any more cost to run this snap in with our licensed Biztalk or not??
Regards,
Mandar Dharmadhikari

BizTalk Health Monitoring(BHM) Supports BizTalk 2010 and 2013 as well . See below link for more info
http://social.msdn.microsoft.com/Forums/en-US/59df885e-603a-47fa-a114-81b8c18f2ba0/biztalk-monitoring?forum=biztalkgeneral#32b2072c-c272-4081-911b-137db815504b
Thanks
Abhishek

Qosmio F60-00Y- Intel RST, TOSHIBA PC Health Monitor crash

Hi,
Just started having problems today with my Qosmio F60-00Y, purchased June 2010. I do have extended warranty but just wanted a quick fix since system is still operational.
As I have lost my factory settings recovery I can not reset my system.
It is working fine at the moment as long as I don't open both programs Intel RST, TOSHIBA PC Health Monitor.
When I open one, system decides to freeze and fan speed accelerates and it shuts the notebook down. I have done system restore several times too and same problem still happens.
I have reinstalled both programs from:
http://www.mytoshiba.com.au/support/computers/qosmio/f60/pqf65a-00y002/download
After re-installing assuming, programs will run fine again. Same thing happens, crashes and shuts down.
I do regular virus and anti spy-wear check up with trend micro 2012 and still active every 7 days and defragment the system every 7 days.
No viruses and spy-wear found.
PLEASE HELP!
thanks,
Lem S.

It is not easy to say how you can fix this.
Try to remove all problematic applications, clean registry entries and try to install it again.

"PC health monitor driver" on Satellite L750D with Win 8 not working

Hi,
I use a Toshiba laptop (model: Satellite L750D psk4ye).
Yesterday I upgrade this Windows 7 to Windows 8 pro (32 bit).
I installed some driver but when I try to setup pc health monitor driver in my computer it is not working.
I try one more time but failed again.
Ive download again this driver from
www.toshiba.eu/innovation/download_drivers_bios.jsp but its not working.
Now what can I do. Please help me..........

Hi
Try to download the PC health monitor released for newer models like for example Satellite L870.
As far as I know it should be possible to install such tool since the health monitor isnt model specific tool.

"logical disk health" monitor is critical

Hello
We have 2 HP-UX servers to monitor and everything is fine until we mount and unmount the servers disks. when we change a disk "Logical
Disk Health" monitors State goes Critical. unfortunately this change may happen again. I reduced the discovery interval to 5 minutes and no luck. other monitors like "% free space" are healthy. what am i missing?

I have done this. I've mentioned above the "Logical Disk Health" monitor is in critical state. other
monitors are healthy.
Some body told me override the physical disk discoveries interval from 14400 to 600 for test. it didn't
work.
I checked the HP-UX MP user guide, there is no information about logical disk health parameters and dependencies.
any idea?

ACE health monitoring queries

Similar Messages

Maybe you are looking for