ACE: How does one probe "rservers redirect" in "serverfarm redirect"?

Probes can be used with serverfarms of type host
probe http WEB_SERVERS
interval 5
passdetect interval 10
passdetect count 2
request method get url /index.html   expect status 200 200
  !--- Probe used to detect the status  !--- of the servers in the serverfarm.
rserver host S1
ip address 192.168.0.200
inservice
rserver host S2
  ip address 192.168.0.201
  inservice
rserver host S3
  ip address 192.168.0.202
  inservice
rserver host S4
  ip address 192.168.0.203
  inservice
serverfarm host SF-1
  probe WEB_SERVERS
  rserver S1
   inservice
  rserver S2
   inservice
  rserver S3
   inservice
  rserver S4
   inservice
When it comes to "serverfarm redirect" how would one emulate the probing to work as above. (When one is loadbalancing servers of type redirect, the probe command is not available for serverfarm redirect SF-2)
Its also not possible to mix reservers of type redirect with serverfarm of host. If it was possible, This would have answered my question, which is.
How does one emulate the probe functionality found in rsever host and serverfarm host in serverfarm redirect?

Probing a redirect server was supported on A2(3.2) or later.
So, you can use the probe configuration on 'serverfarm redirect', where 'ip address [ip_address] routed' option is required.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_x/Release/Note/RACEA2_3_X.html#wp620109
Unfortunately, 'rserver host' and 'rserver redirect' cannot exist together in the same serverfarm since 'serverfarm host' is
for real server and 'serverfarm redirect' is for redirect rserver.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/command/reference/config.html#wp1117844
When you use backup serverfarm as below, you can use both serverfarms. However, you cannot use primary serverfarm
and backup serverfarm at the same time.
policy-map type loadbalance first-match lb
  class class-default
    serverfarm SF1 backup SF2
Regards,
Yuji

Similar Messages

  • How does one redirect installation to a different disc drive?

    How does one redirect installation to a different disc drive?

    Hi space needle,
    Thank you for posting on the Adobe forums, please help us with the information listed below for further assistance on this.
    1) which Application are you trying to install?
    2) Operating System you are working on
    3) Method of installation (customized or the standard installation)
    Thanks,
    Vikrantt Singh

  • In Pages 5 when I try to attach a pages document to an email it gives me 2 folders and 4 files ???  How does one email a pages document.

    How does one email a pages document? In pages 5 when I try to attach a pages document to a gmail email it gives me 2 folders and 4 other files to choose from. 

    Sounds like you are using Gmail.
    Pages 5 uses a zipped package of files as its format. 3rd party servers don't understand the format and show it as the component parts.
    Use Mail toenail the file or zip the .pages document before sending.
    Peter

  • How does one change the font size for folders and/or file lists in the Bookmarks Library?

    How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
    Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
    As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
    With regard to font size,
    1. there is no “Edit Bookmarks” or like option to edit the list in this version
    2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
    3. expanding the browser window has no effect on font size
    4. “Preferences” settings for font size has no effect in that window either, including advanced settings
    5. “Help” offers none that I can find.
    Can any of you Help?!?

    Maybe this extension helps:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  • How does one use an external microphone with the internal camera?

    I want to use the internal camera because I don't have anything better but I want to use an external mic to record video and sound simultaneously, for a video blog. How does one accomplish this? I'm getting no help from the manual.

    Try this. Connect your external mic, either through the audio line in port or, into a USB port if it is a USB mic and then go to System Preferences under the Apple and select the Sound icon under Hardware. Click on your mic shown in the list of input devices.
    Hope that works for you.
    Forest

  • In the new Keynote how does one find the Wrap Inspector to wrap text around a photo??? Thanks

    In the new keynote, the help section refers to the Wrap Inspector.  How does one find that or how does one wrap text around a photo??   Thanks

    You can also use the shape tool to draw a shape roughly following the outline of the graphic you want to wrap text around, change the fill and stroke to "none", then paste your text within the shape. It's a few more steps, but it opens you up to many creative alternative layouts.

  • I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

    I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

    Welcome to Apple Support Communities
    That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
    This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

  • HT1918 How does one organise the apple ID so that one uses the same email address to have an account on both the UL and Belgian itunes stores?

    I have in the past created an Apple ID for use with the UK itunes store, because I want to read in English.  If I sign in it seems that this ID will only allow me to purchase from the UK store.  But I live in Belgium, so I can't download from the UK store.  So I tried to create an apple ID for the Belgian itunes store.  But I want to use the same email address as I used for the first apple ID I made (because I'm fed up of having to remember which email address I used for which account).  When I tried this, I just get a message saying that the email address is already in use for another account (which I know, because it's me who made that account).  Does anyone have a workaround for this?
    cheers
    Andrew

    I have tried again using the same password. and it still doesn't work.
    I'm presuming you went ahead and set up a new Apple ID, yes? Using the same password in more than one Apple ID has worked for me in the past, but I haven't tried it in a while so the tightened security may have changed that. You could use the same password but add "-UK" and "-BE", or something like that, to make it easier to remember.
    I understand what you mean about losing the ability to deal with UK purchased stuff, but this is becoming so inconvenient that I do want to delete that UK apple ID account.  I have looked everywhere I can think of on the apple website (apple id, itunes, support etc) and I can't find a link/eplanation/contact point that deals with deleting apple ID and itune store accounts.  Surely this must be possible?
    It's possible, but Apple is very reluctant to do it, and it's not something a user can do on their own. It would be better to just stop using the UK account rather than trying to get it deleted. Just remove your payment information and there should be little reason to have the account deleted. If you really want to try, though, you'll need to send a message to iTunes support specifying that you want the account cancelled.
    On a completely different matter, I have bought my son an ipod touch.  But since he is younger than 13 years old, how does one go about using the itunes store to get music onto his ipod touch?
    You would need to buy tracks for him; he's too young to have his own iTunes Store account. To control what gets synched to his iPod, this should help:
    http://support.apple.com/kb/HT1495
    Regards.

  • Firefox update installs, but does not apprearon screen, or task manger yet is running what is going on and how does one fix it?

    I installed the update Mozilla Firefox 28. It was suppose to launch upon completion. it did not appear on the monitor screen, nor the task manager, but was running; for when I attempted to install the older version again it, it said that Firefox was running and needed to be turned off.
    I restarted the computer and tried opening Firefox, with the same results.
    After restarting again, I attempted to reinstall the update, with the same results taking place.
    I attempted to uninstall Firefox and install the new version. The same results took place.
    In the past, I could install Firefox 27 update, only now I can't for the same thing takes place. Past a certain version (19), this event takes place, but 19 and older can install it with no problems.
    I checked Firefox troubleshooting information. All was normal. I checked my firewall. Again, all was normal. Tried Firefox reset. Did not help. Tried with my firewall disabled. Did not solve the problem.
    Ran a virus check (deep) no viruses. Checked my computer system. No errors.
    I can install updates for my other programs, even install new programs; just not Firefox.
    What is going on and how does one fix it.

    Hi Amseeking,
    Thank you for your question. From your description, you tried to install the 28 update from a version 19 installation. Did you install a fresh install of 28 successfully? Where the name of the file is"Firefox Setup Stub 28.exe"? This is what is sound like happened. When going to about Firefox and searching for updates it installs over the current installation. However if Firefox was already running, there are more than one installation.
    Updating from version 19 to 28 would not be a problem. However the user data from your previous version would have to be imported to the new installation if you have more than one install on that computer.
    An easy way to tell is to search for Firefox in the Start menu to see if more than one icon shows up in the search results.
    I hope this helps.

  • How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion?  I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

    How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion?  I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now.  Mail will no longer download on the MacBook Pro and keeps asking for my password.

    Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
    For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
    I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

  • How does one remove temporary files from Safari?  A friend logged on to her Facebook account using my iMac.  Now I can't remove her e-mail address from Facebook.  It was suggested to me that I try clearing temporary files from Safari but I can't find

    How does one remove temporary files from Safari?  A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6.  Now I can't remove her e-mail address from my computer.  When I open Facebook her address shows in the user button.  I do not have a Facebook account.  It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this.  Are temporary files the same as the cache?  It also was suggested that I try clearing Safari cache.  How do I do that?

    Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

  • How does one sync music from iTunes on a Mac with an HTC Windows 8 phone

    How does one sync music files from iTunes running on a MacBook Pro with an HTC Windows 8 phone?

    One doesn't.
    Itunes syncs with Apple devices.
    You can put the music on your phone. You would have to read the directions for your iphone to learn how to put your music on it.

  • Using family sharing, how does one view and download songs from a family member's collection in itunes?

    Using family sharing, how does one view and download songs from a family member's collection in itunes?

    When you click on your device you are presented with the pages
    Summary
    Info
    Apps
    Tones
    Music
    Movies
    TV shows
    Books
    Photos
    To remove Audiobooks depending on the type of Audiobook ie a series of mp3 files you will find under music and probably have to deselect the album name to remove it. I don't have any of these as I download from Audible or I use Audiobook Builder to stictch together mp3 files into m4b files. To find these Click on Books you will immediately see a section for books (in reality ebooks). Scroll down past that and you will see Audiobooks where you can select and deselect. Deselect the required Audiobooks and Click Sync

  • How does one get huey pro to start up when computer starts in morning

    Huey Pro is a sensor that measures and monitors the light in the room so that colors are rendered as acccurately as possible.  Once I calibrated the screen and device, it should fire up when I restart the computer but it dos not.  the icon in the system folder when clicked, says that the system preference folder needs to restart, the it will fire up. 
    So How does one get this to start early.
    Robert

    Hi Robert
    I am not sure that you can make the Huey Pro work correctly.Worked fine on windows but it was the one programme for me that I have never had success with on the Mac.
    I have checked the Huey web site for info but the support seems to have stopped.
    So the only way I can do it is to wait until the Icon is in the top right section of the screen,note that a white cross is in it and then click on the Icon in the dock open up the programme until the Start bit occurs then just click the close button.That fixes it for me.
    Rob

  • How does one pass import parameters to a report within a method?

    Hello all,
    Well how does one  pass import parameters to a report which is within a method ...end method.
    for example :
    method 123
    SUBMIT reportname using selection '1000'
    endmethod .
    Here we need to pass values into the selection screen and run the report for those values.
    The values are say 'ABC'   (  tablename "DEF" and field name "HIJ" ).
    I hope the question is clear, awaiting your response 
    Thanks and Regards,
    Sandeep.

    Go to SE24
    Parameters: Give the Parameter name, Typing method is "Type" is the domain type that u are selecting, say for e.g :  Parameter is "P_CONT" , its associated type "CHAR32" etc
    For Select Options:  Parameter name say "S_CUST", Type"importing". For this you need to give an associated type which must be created as "TABLE TYPE " in SE11. That table type needs to have a "LINE TYPE" .
    LINE TYPE is a Structure created with components "SIGN, OPTION, LOW & HIGH" for select-Options.
    NOTE: for a Table type related to Customer data fields "say KUNNR", the line type created must have the Component Type and data Type corresponding to the Data Element associated with "KUNNR" ;i.e: "CHAR" etc.
    See if this is clear to you or revert back in case of any Confusion.

Maybe you are looking for

  • Can't open flash

    i can't view flash content with my safari. i followed the window that says get flash player, i've checked my java script and tried safari help, but it still doesn't work. it's all fine on my internet explorer though. i'd be glad if you could help.

  • How to include jar file ??

    Hi, I want to use some classes from a .jar file in my application. In NT I have placed the .jar file in ....iplanet/ias6/ias/lib/java and included the path in CLASSPATH variable in .../iplanet/ias6/ias60/lib/IAB . I am facing problem in doing the sam

  • Bug w/ 2009.8 x86_64 image or my DVDr?

    I just replaced a burnt-out DVDr w/ a new one (Sony Optiarc  AD-7240S-0B) and am finding that my Arch 2009.8 x86_64 disc doesn't boot promptly as it did before.  I have burnt several discs from the iso at different speeds and they all act the same. P

  • RoboHelp 8.02.208 Conversion Problems

    We have a large body of  documentation in RH5 and we have successfully converted several projects in our initial test. So far there do not seem to be any issues with style. However, conversion of a RH7 project to RH8 has me completely baffled. I veri

  • IDSM-2 Mode - Best Practice

    Hi All, I'm gonna deploy two 6500 switches with FWSM, IDSM and ACE modules. My network consist of Voice vlan, Server vlan, Application vlan and some user vlans. I will also have other devices like CSMAR, ACS etc. My question is which IDSM mode (promi