ACE maintenance page for HTTPS connection (non offloaded mode)?

Hello experts
how do we configure a "redirected" maintenance page for HTTPS Serverfarm when the serverfarm is down/probefailed?
lets say users are accessing https://xyz.com, and if the serverfarm is down, I want users to get redirected to https://abc.com or even http://abc.com
(getting a certificate error or a https to http redirection error is acceptable)
What i understand from TAC, since we are not terminating SSL on ACE, we have few restrcitions on using redirect. Thereafter, TAC hasnt been too helpful on this query.
HTTPS connection is directly terminated on Server with certificate. And we are using SSL Session Stickyness on ACE (I know not the best thing to do..)
Pls. assist.

so do i assume there is no way to do this without using ACE for SSL termination?
In our case, not using ACE for termiating SSL connections is to draw a line between Network and System administration, a business requirement.
Thanks for your replies.

Similar Messages

MI Client 7.1 - No credentials for HTTP connection

Hi Everybody!
I´ve been testing Mobile 7.1 . I installed SAP MI Client for Laptop, configured all connection parameters (server, port, client) and when I try to synchronize with DOE, I get the error:
m="Cannot determine reason for not authorized response from server --> com.sap.tc.mobile.exception.standard.SAPIllegalStateException: No credentials for HTTP connection
     at com.sap.tc.mobile.cfs.sync.synchronizer.http.HttpSynchronizer.createNewServiceConnection(HttpSynchronizer.java:1095)
     at com.sap.tc.mobile.cfs.sync.synchronizer.http.HttpSynchronizer.checkReasonForNotAuthorized(HttpSynchronizer.java:1277)
     at com.sap.tc.mobile.cfs.sync.synchronizer.http.HttpSynchronizer.readHttpResponse(HttpSynchronizer.java:1323)
     at com.sap.tc.mobile.cfs.sync.synchronizer.http.HttpSynchronizer.exchangeStatusWithServer(HttpSynchronizer.java:340)
     at com.sap.tc.mobile.cfs.sync.synchronizer.http.HttpSynchronizer.synchronize(HttpSynchronizer.java:591)
     at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.synchronizeOnce(SyncManagerImpl.java:622)
     at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.synchronize(SyncManagerImpl.java:452)
     at com.sap.tc.mobile.cfs.sync.spi.SyncManagerSPI.synchronize(SyncManagerSPI.java:694)
     at com.sap.tc.mobile.cfs.sync.spi.SyncManagerSPI.synchronizeStart(SyncManagerSPI.java:676)
     at com.sap.tc.mobile.cfs.sync.spi.impl.SyncCoordinator.startSync(SyncCoordinator.java:133)
     at com.sap.tc.mobile.mwd.laptop.container.SyncProgress$SyncThread.run(SyncProgress.java:580)
     at java.lang.Thread.run(Unknown Source)
I´ve searched, but i haven´t got anything. I also created the Device on DOE Administrator and I configured the DOE following SAP Help (http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm)
I thought that the problem could be role, but i set all possible DOE roles to the user. I´m trying synchronize with the same password that I log in DOE.
has anyone any idea?
Thanks.
Edited by: Rogério Tambellini on Nov 13, 2009 6:25 PM

Hi,
I´ve solved the problem following the link:
Thanks for your attention.

How we get subordinate pages for a connected user?

Hi, I am a new user of WebCenter.
My aim is to get all pages and all subordinate pages for a connected user with a declarative and programmatic method.
Could you please help me?
Thanks.
-Borheneddine.

Krr1sh wrote:
Thanks for the reply Helios,
I am into a specific situation where I get the username an input and I need to find out what is the default language set to that user at user level, if nothing set at user level then Resp level and propagate it till Operating unit level.
Thanks
SaiPlease run the query in (How To Find All Users With A Particular Profile Option Set? [ID 367926.1]) referenced above.
Please replace this line in the query:
and n.user_profile_option_name IN ('&User_Profile_Option_Name')With:
and n.user_profile_option_name IN ('ICX: Language')Thanks,
Hussein

Can't reassign default home page for site connection

I am connecting to a site where index.php is the default home page. For some reason, it keeps pointing to index.html and of course comes up "page not found". I have edited the connection so that ONLY index.php is in the default page list (under index files tab), and it still looks for index.html.
I have deleted the entire connection, restarted contribute, navigated to the home page successfully during set up, only to have it look for index.html again. I have also manually typed in the full url and index.php in another set up attempt. I logged onto the server and deleted the entire folder that Contribute set up, thinking it was holding on to some information in the files there. I restarted contribute, created a new connection to the site, and it STILL is looking for index.html. It should be loading http://www.gotohudson.net but instead it's trying to load http://www.gotohudson.net/index.html.
HELP me get rid of that reference.....
thank you,
Marita

You can set the Home Page each roles also. Follow the below mentioned steps to set the homepage for your site.
Steps:
1) Administer the website.
2) Select the role, to whom you want to set the homepage.
3) Click on Edit Role Setting.
4) In the General category, Choose the Home page for users in this role.
5) Click OK to save and exit.
Hope this solves your problem.

Load balance for HTTP Connection to ABAP System (Type H) RFC connection

Experts,
For proxy we are using HTTP Connection to ABAP System (Connection type H) RFC connection in PI to get connected to ECC. I only see the option to use Target host in the Target system settings than Load balance option. In general ABAP Connection (Connection type 3) has Load balancing status option in Target system settings.
My requirement is I should use a logon group with the message server when PI connects to ECC. How can we achieve this? At the moment I can only use the Central Instance or any dialog server (App server) in RFC but not a logon group.
Thanks in advance.
Mahesh

Hi Naga
Could you check the link below?
http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/c5935087b62d66e10000000a42189c/content.htm
https://service.sap.com/sap/support/notes/1040325

ACE / maintenance page

Hi,
Is there a way to redirect client request to a maintenance page when all probe failed ? In other words, if I have a serverfarm where all rserver are down, is it possible to redirect the new client requests to the VIP to a server or URL or a local html page on the ACE ?
Thanks!
Pierre

Use a backup serverfarm in your policymap; with a redirect serverfarm to the target URL you want.
It's not possible to store the maintenance page directly in the ACE.

Exception for HTTP over non-standard port

I have two questions. First, I am using iManager to manage the filters, is
there a special procedure to go through to make filter exceptions active?
Second, I have a new piece of networking hardware with a web interface that
is outside the BorderManager firewall. I need to craft an exception for
this. I've tried using the port it is set to use and I have tried the "any"
service and I'm just not getting ti to work. What am I missing?

In article <URs%g.18470$[email protected]>, Daniel WELLS
wrote:
> I have two questions. First, I am using iManager to manage the filters, is
> there a special procedure to go through to make filter exceptions active?
It should be pretty immediate, but relies on the server holding a replica of
the OU that holds the filters (nbmrulecontainer) to pick up changes.
I much prefer to use FILTCFG on the server itself to make changes, and they
are immediate then.
> Second, I have a new piece of networking hardware with a web interface that
> is outside the BorderManager firewall. I need to craft an exception for
> this. I've tried using the port it is set to use and I have tried the "any"
> service and I'm just not getting ti to work. What am I missing?
What port is it using?
If you unload IPFLT (drop filters), does it work then? Perhaps it doesn't
like being managed through a proxy, or you have to add filter exceptions, or
also bypass proxy.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Am I able to set my own publickey manually on my mozila browser for HTTPS connection?

I just wonder if I can use my own key pairs (public and private) on my browser to make secure connection (HTTPS) with a server which has its own key pairs?

The '''persdict.dat''' file doesn't exist until the first "personal" spelling is saved. It is a custom text file, with one custom dictionary entry per line. Compression isn't used. It is easy to edit or add words by using a simple text editor, as long as the "one word per line" is kept intact, and special characters aren't added by the text program.
The same '''persdict.dat''' file )per Profile) will be used by any "dictionary" you have installed, and it is used by the Spellbound extension, too. As to other "spell check" extensions, I can't say - the built-in spellchecker suits my needs, although I did use Spellbound before Firefox included the spellchecker as a feature. ''Before Spellbound existed, I "rolled my own" spell check "extension" with instructions that were posted in the MozillaZine fora using files extracted from the Mozilla Suite (which is now known as SeaMonkey.)''

ACE - TCP Options for Proxy-Connections

Hi all,
I have the issue that my ACE does not seem to allow tcp options with L7 proxied connections to the servers. For the client side connection I see the TCP option timestamp for example, but unfortunately the ACE itself does not put the timestamp option into its own TCP connection to the rserver. A 'parameter-map type connection' does only seem to have an effect on L4 connections, not proxied ones. Does anybody know a way how to tell the ACE to have e.g. a timestamp option in the TCP connection to the server as part of a L7 loadbalancing?
Any help is highly appreciated!
Thanks,
Daniel

Daniel,
we do not support timestamp at L7.
I think we only support window scaling.
Gilles.

Disable the Prompt Message for http connection

Hi! I'm doing the application for j2me and facing some problem with the refreshing the webpage. I'm able to refresh the page using the default emulator but when I'm trying to deploy it into the Nokia series 80 emulator, it will always prompt me the prompt to allow connection everytime I'm refreshing the page. Does anyone know how to hide the prompting of the confirmation and straight away doing the connection for the nokia series 80 platform?
Please help.
Regards,
jaceline

Sign your midlet

How to Create SSL certificate for HTTPS Connection in SAP PI

Hi,
          I have Proxy to HTTPS scenario. I need to provide my SSL certificate( SAP PI SSL Certificate) to the vendor.
          How to generate SAP PI SSL certificate. I have already imported vendor certificate using STRUST T-code.
         I am not sure from where to generate SAP PI SSL certificate that need to be shared with vendor.
         Please help me on this issue.
Thanks,
Siva

Hi,
Check if it helps:
http://help.sap.com/saphelp_nwpi711/helpdata/en/49/26af8339242583e10000000a421937/frameset.htm
But as mentioned for the colleague above, you can create that on Visual Administrator Tool -> Keystore
Regards,
Caio Cagnani

Setting Proxy for HTTPs Connections

Hi,
I have a multi-threaded program where i need to decide which gateway system i would need to post my http requests.
Both these gateways (eg, GW1, GW2) have to be accessed by proxy. Currently i set the proxy and port as follows:
System.setProperty("https.proxyHost",PROXY_HOST);
System.setProperty("https.proxyPort",PROXY_PORT);
But, this gives me a problem as thread 1 ends up with the proxy details for GW2 and vice versa.
Any workaround apart from setting this on the system level.
I do not intend to run two seperate instances of JVM.
Appreciate your time and input :)
- Cheers
Sakthi

This is called concurrency, and the object needs to be locked while one thread is using it and then relased so the other thread can use it.

Disable Security Alert while redirecting for secure to non secure mode.

Hi Experts,
I am new to the portal and came accross a very different kind of requirement for which i need you advice.
On pressing the Logout button on the portal, the navigation/control is redirecting to the non secure Http website. My portal is on Https site. Now the issue is upon logging out I am getting the security Alert " You are about to direct to a connection that is non secure. Do you want to continue? "
Now I have a requirement to suppress or remove this pop up. I do understand that this is the IE functionality to show the pop message and I have already uncheck the check box under Internet Options -> Advanced -> miscellaneous -> Warn if changiung between Secure to non secure.
Please suggest !
Thanks
Shobhit Taggar

Shobhit,
Which version of IE?
Regards,
Sandeep Tudumu

Block Page Customization for https

Hi All,
I have Created rules for blocking some sites like facebook.com , dailymotion.com now i want to customize a page for blocking message for my users it just works fine for http but on https request its not working and new pages displays "THE PROXY SERVER
IS REFUSING CONNECTIONS"
Pls help me how i can i customize my block page for https requests too

Hi,
Instead of showing these error pages upon denied access, you could try to configure the denying rule so that the proxy would respond to the denied request with a redirect to another URL.
New in Forefront TMG SP1: Redirect on Deny with dynamic parameters
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HTTP Connection for Solution manager

Dear Experts,
SAP support team asked to create a http connection for solution manager for service check.We already created a R/3 connection for solution manager.why they are asking for HTTP connection? Really they required HTTP connection ?,Is they are any problem with this type of connections.What are the transaction codes which are not run in SAP GUI. Please clarify my doubts.
Thanks and regards,
Patan Thavaheer.

Hi Patan,
Solution Manager transaction codes open in http browser. You can check the behaviour yourself by making a login to solution manager and execute transaction code solman_setup.
For SAP support to open http browser within remote support, they need to have http connection opened along with HTTP url maintained.
Refer to the SAP help link above for the procedure.
Hope this helps.
Regards,
Deepak Kori

ACE maintenance page for HTTPS connection (non offloaded mode)?

Similar Messages

Maybe you are looking for