ACE module support for IPv6 ?
what is the latest on IPv6 support for ACE module? I saw something saying 2HCY10, but that's where we are now. Any documentation pointers to current compatability and or roadmap are greatly appreciated.
thanks
Bob O.
As mklemovitch described in the following thread, IPv6 will be
supported on ACE30 module but not in the initial release.
There is no plan for ACE20 module.
https://supportforums.cisco.com/message/3192517#3192517
I'm not sure but maybe around Q3 CY11 or later.
I cannot see the documentation regarding this feature on CCO.
I would suggest to contact your account team for details.
Regards,
Yuji
Similar Messages
-
Is the ACE Module support IPV6?
dear all
is the ACE module support IPV6?
best regardsThe ACE does not currently support IPv6 but it is being looked at to be added to the feature set.
-
Hi,
Does ACE support IPv6? Are there any limitations on deploying ACE with IPv6?
Thanks,
NiteshHi Syed,
What's the update on support for IPv6. When is it expected to support it. Any comments on it?
Regards,
Nitesh -
ACE Module support loadbalance rmi, ajp, jms, etc?
Hello,
Do you know if ACE Module support balance the follow protocols:
1. rmis
2. ajp
3. jms
4. IIOP
5. CORBA
6. IIOPS
I know that ACE module support http, https and tcp/udp port.
Best RegardsHi Alvaro,
There are no specific handlers in ACE for the protocols listed. RMI over IIOP and majority of CORBA implementations are TCP socket based and typically require persistent (Sticky) assignments to real servers if load-balanced, so generic ACE loadbalancing predictors, probes and sticky features should suffice. If you need to do a deeper inspection you can use the Generic Protocol Parsing, and custom Probe (TCL) capabilities to track content of interest. Same applies for JMS and AJP, although there are different transports for these prototocls (i.e. JMS over HTTP) which may change configuration requirements.
In general, since these protocols are used for stateful application integration, long running transactions, messaging, and data access...and they are very sensitive to object namespace/target references you should detail individual use case requirements and applicability of external application delivery controller based load balancing (i.e. using ACE).
Let me know if this helps or if you need more detail. Thanks. -George -
Feature request: Slideshow module support for video files
I'm very excited about your MTS support!
Feature request: Slide show module support for video files...
Say you have 10 takes to choose from. Are you able to almost like SLIDESHOW view the 10 clips full screen so you can decide, like a playlist? Or rate them as they play? It would also be great, like SLIDESHOW to be able to export a MP4 with a title, the 10 clips you are working with, and maybe add an end title and a song, just like SLIDESHOW.
I have found editing stills like this in slideshow far faster than in any other editing program.
Basically, I just need a fast means to view or export an MP4 of a set of video clips to review. You are almost there.
great job!!!
MaxI was also disappointed that video is not supported in the slideshow module -I currently have to use another solution when I want stills mixed with videos, would be great to be ablo to keep it all in LR!
-
Does Aironet 1100/1120/1130 support for IPv6 ?
Experts,
I find much document, but not found information about whether those support for IPv6 e.g. dual-stack like newer series.
Has anyone used to test on those?
Thank you in advance for any info,
Nipat.pHi,
When working with WLCs if you are running code 7.2 you will be able to support IPV6 but this code is only supported by the latest model of WLCs and the APs that are supported under this code.
On previous WLCs models that support up to code 7.0, the WLC only handles IPV6 pass through after code 6.0 since it does not support native IPV6. -
Support for IPv6 DHCP or RDDNS
Hi,
I'm deploying IPv6 on our company and found out there is not possible way to automatically get DNS servers for IPv6 for mac computers, since it doesn't support dhcpv6 or the extensions for RA in stateless configuration mode.
Any word on when are this features going to be available?It's really rather ridiculous DHCPv6 isn't implemented in OS X yet. I can (possibly) understand this for 10.4 and 10.5 but 10.6 is going to run into IPv6 deployment scenario's and should be able to handle all cases. I hope to God 10.7 has decent v6 support throughout OS X.
As far as I know, the dhcp-client used by OS X is the KAME project client, now known as WIDE-DHCP which does have support for DHCPv6 and has so for a long time. Why Apple is so reluctant to include this feature in both iOS and OS X is quite the mystery. -
ISE: support for IPv6 DACL's
Hi,
Does anyone know if/when ISE will be able to push out IPv6 dynamic acl's? I have not managed to find any information on this other than an old post here: https://supportforums.cisco.com/discussion/11795676/ise-support-ipv6-dynamic-acls
Thanks,
Phill MaceyIt's not supported as of the current ISE 1.3.
I've heard it is planned for a future release but there's no announced or committed date as of yet.
If your're working with a partner or Cisco account manager, be sure to officially request it if it's important to you. Customer requests help build the business case for prioritizing the features. -
Hi all,
As i understand that IPv4 may run out as early as nxt mth. And we may need to use IPv6. Hence i would like to know if the following devices support IPv6.
1)cisco asa 5510/5505
2)cisco pix 515e
3)cisco 2811
4)cisco 1811/1841
5)cisco 837
6)cisco 1720
How are you planning the transition from IPv4 to IPv6? Pls advise, thks in advance.The whitepaper link lists software version information you'll need to know to determine if your devices are currently IPv6-capable. If they are, you should check out the IPv6 resource center at http://www.cisco.com/ipv6 for more on addressing, configuration, advanced IPv6 features, managing an IPv6 network, etc.
-
Support for IPv6 Router Advertisement Option for DNS Configuration RFC 5006
Hi everyone, do you know that whether Cisco routers support “IPv6 Router Advertisement Option for DNS Configuration RFC 5006” currently, is there any roadmap for this support? Thanks for your help!
No, this is not currently supported, and the last I heard, there is no roadmap for this until it becomes a standard (as opposed to being experimental).
-
GRC Controls Suite Support for IPV6 and IPV4
Dear all
Please can you help to confirm whether latest version of GRC Controls Suite support the co-existence of IPv4 and IPv6 or capable of transporting IPv6 and IPv4 traffic within it?
Any help much appreciated?
best regards
VineetPlease see MOS Note ID: 741001.1 - GRC Suite Certification Matrix
If the information you need is not there, I strongly recommend open an SR to find out and let us all know! -
SSL initiation for SMPP on ACE module
Hi Community,
we have a new requirement to enable a connection to a server with SMPP protocol wrapped inside a SSL channel for transport over internet. Can any one suggest if the ACE module support to do SSL initiation to secure standard SMPP (3.4) servers?
Kind regardsHi,
ACE does support SSL initiation. Please visit the below link for details. Ace also supports SSL termination and End-to-End SSL.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA5_1_0/configuration/ssl/guide/initiate.html
Regards,
Kanwal -
Hi,
I am using oci.dll 10.1.0.4. I would like to know whether it supports IPv6?
In all forums related to IPv6 support for oci I find it redirected to IPv6 support Oracle database 9i and 10g (which do not support IPv6), but my question is whether the interface library support IPv6?
Thanks in advance.
Regards,
RichaNo, there is no support for IPv6 in any part of 10g; you need at least 11.1.0.6. See Meatlink Note 579222.1.
-
IPv6 Multicast support for service providers 6PE / 6VPE
Hi,
Can anyone comment on the current state of development for IPv6 Multicast support for Service Providers who are using 6PE or 6VPE in their MPLS core.
(6PE - SP is running MPLS in its IPv4 core, it uses IPv6-enabled provider edge (PE) routers to transport IPv6 traffic over an IPv4-only enabled core. 6PE does not support VPN,s it just provides a mechanism for tunneling IPv6 packets from ingress PE to egress PE routers)
(6VPE - refers to a PE router capable of supporting IPv6 VPNs. A 6VPE solution can be used to provide IPv6 based layer 3 VPN services in a similar way to IPv4 based Layer 3 VPN services.)
My understanding is that 6PE and 6VPE solution are unable to support IPv6 multicast traffic.
Any further information on configuration, design or development work in the pipeline would be gratefully received,
kind regards JohnHi John,
From our question I understand you are sking about the MVPN support for IPv6 multicast. It is actually supported on the XR platform as of now. Please refer:
http://www.cisco.com/en/US/docs/routers/xr12000/software/xr12k_r4.0/multicast/configuration/guide/mc40mcst.html#wp2890031
I hope this helps.
Regards,
Ruchir -
HOWTO: Poll Server farm stats on ACE module
Hi All,
We are currently working on providing network monitoring information of our server farms programmed on our ACE modules, what is the best OID's to use?Hi Rob,
Unless there's something already out with the release of code 4.X and ACE 30 then I'd say the MIB that can help you here would be the .CISCO-ENHANCED-SLB-MIB
Here is the info from the SNMP object navigator
http://xrl.us/bk2vmo
Here is the list of supported MIBs by the ACE module just for reference and download
ftp://ftp.cisco.com/pub/mibs/supportlists/ace/ace-supportlist.html
HTH
Pablo
Maybe you are looking for
-
My adobe reader XI don't convert PDF to DOC.
I'm subscribe the service of convertion. Why should i do?
-
Abap MDM API - get table fields and types
Hi gurus, dealing with a simple task for my development... I need to retrieve, for a given MDM table name, a list of field's names with their data types in Value_pair format. Basically, this is what RETRIEVE method does; but: - I don't need any value
-
How to call operating system commands?
Can we call OS commands from JAVA? I am trying to call lpr/lp commands from JAVA. Can anybody guide me where to search for this information. Thanks in advance Srini
-
How to count peaks??
Hello everyone, I'm a new user of LabVIEW and I'm gonna ask you about a problem that surely many of you will find quite boring. I'm developing a software for a test machine gestione that uses an alternate bending, by a revolution counter that generat
-
I'm getting an issue where my broadband keeps disconnecting and reconnecting. It is effecting wireless devices, a laptop connected via ethernet, AND the "other channels" on my BT TV Box. 1. Product name: BT Home Hub 2. Serial number: +068227+NQ303245