ACE modules not syncing up

Hi,
I was adding logging and snmp to my ACE modules this weekend. I first made the changes to the primary ACE module and did a wr mem; I then went to my secondary module and noticed that the modules did not sync.
After some troubleshooting; I decided to reboot the secondary module, when the module came back, it was in sync.
As anyone run into this issue before? What is the command that will show me who is my primary module and the state of the modules?
I am running ACE code: A2.1.2
Regards,
John...

Thank you for your reply; I think that this was my problem:
14:1007 => Feb 01 07:57:27: ha_process_message:1818 Running sync info: mode 0, s
tatus 0, reason Detected license mismatch with peer, disabling running-config au
to sync
14:1008 => Feb 01 07:57:27: ha_process_message:1822 Startup sync info: mode 0, s
tatus 0, reason Detected license mismatch with peer, disabling running-config au
to sync
I first upgraded the license on my primary and made my changes, then tried to sync. The only problem I see here is that when I did the wr mem the module starting to sync and said that the sync process was complete.
John...

Similar Messages

  • ACE Module not supporting

    Hi,
    We have migrated CSM to ACE Module recentlym all the applications are working fine. But one of our real server , Hosting team did NIC Teaming (Active-Active) which was working fine but not with ACE Module (Briding Mode).
    My assumtion is because of ACE in Bridge mode all the non-loadbalancing traffic has to go through ACE Module, So we couldnt access the server directly. If ACE is in One-armed mode i think it should be fine.
    But with bridge mode do we have any option to make it working.

    there is a restriction regarding NIC teaming in active/active mode.
    The ACE uses an hardcoded mac-to-IP mapping with ARP. As with active active nic teaming you'll have 2 different mac addresses, the one which is not present in the ARP cache of the ACE is considered as a security violation.

  • ACE module not load balancing across two servers

    We are seeing an issue in a context on one of our load balancers where an application doesn't appear to be load balancing correctly across the two real servers.  At various times the application team is seeing active connections on only one real server.  They see no connection attempts on the other server.  The ACE sees both servers as up and active within the serverfarm.  However, a show serverfarm confirms that the load balancer sees current connections only going to one of the servers.  The issue is fixed by restarting the application on the server that is not receiving any connections.  However, it reappears again.  And which server experiences the issue moves back and forth between the two real servers, so it is not limited to just one of the servers.
    The application vendor wants to know why the load balancer is periodically not sending traffic to one of the servers.  I'm kind of curious myself.  Does anyone have some tips on where we can look next to isolate the cause?
    We're running A2(3.3).  The ACE module was upgraded to that version of code on a Friday, and this issue started the following Monday.  The ACE has 28 contexts configured, and this one context is the only one reporting any issues since the upgrade.
    Here are the show serverfarm statistics as of today:
    ACE# show serverfarm farma-8000
    serverfarm     : farma-8000, type: HOST
    total rservers : 2
                                                    ----------connections-----------
           real                  weight state        current    total      failures
       ---+---------------------+------+------------+----------+----------+---------
       rserver: server#1
           x.x.x.20:8000      8      OPERATIONAL  0          186617     3839
       rserver: server#2
           x.x.x.21:8000      8      OPERATIONAL  67         83513      1754

    Are you enabling sticky feature? What kind of predictor are you using?
    If sticky feature is enabled and one rserver goes down, traffic will leans to one side.
    Even after the rserver retuns to up, traffic may continue to lean due to sticky feature.
    The behavior seems to depend on the configuration.
    So, please let me know a part of configuration?
    Regards,
    Yuji

  • C6513 Ace Module Pair not syncing

    Hi,
    I have a failover pair of Ace Modules that have stopped syncing - Active not syncing with Standby. I have checked the config and it seems that recent additions of contexts in the Admin Context to resource groups and fault tolerant additions of ft groups have not synced across to the standby unit. All other config checks out as okay.
    Can anyone point me in a good direction to restart the sync?
    Thanks
    Adrian

    Adrian-
      To see the error - login to the context that isn't syncing and issue "show ft config-error"
      Scripts and SSL keys/certs are not synced over, they will cause an FT sync error.  If that was what happened, then upload the files to the context, then toggle "ft auto-sync running-config" on the active context and it will re-try the sync.
      If the issue was not key/cert or script related, get a TAC case open, it is extremely likely there is a bug involved.
    Regards,
    Chris

  • ACE MODULE IN BRIDGE MODE NOT LOADBALANCING

    Hi,
    I setup an ace module in bridge mode as follows:
    mfsc(vla80) > (vla80)outside fwsm, fwsm inside(vla40) > (vla40)ace-clientside, aceserverside(vla41)
    and the servers have the fwsm svi(vla40) as their gateway. But, the ace is not loadbalancing.
    The config script is attached. Is their anything I am missing?
    Attach

    Check my troubleshooting guide on this forum.
    There are few things to do to narrow down the issue.
    Gilles.

  • Can not import ACE module to ANM

    Hello,
    Good day.
    I recently facing an interesting problem.
    We are running ANM 5.1.0 to manage our LB contexts, those contexts are configured on ACE20-MOD-K9 module which installed in Catalyst6500 switch. Our installation is like this, two ACE20-MOD-K9 modules installed into same Catalyst6513 different slots. And  those two ACE modules serves different Data Halls, contexts configured on those modules are completely seperated, different VLAN, different subnet no relation at all.
    I'm able to import the catalyst chassis into ANM and under Config>Guided Setup>Import Device>Modules, I'm able to see both ACE modules but only one module able to be imported, another one I can not even choose it. There are slightly difference those two modules show themselves in that page. The one I'm able to import shows exactly it's module type and version number but another one is showing someting strange.
    Slot#      Model                     Type            Serial #      State                 Version                Description                                      #VC
    3            ACE20-MOD-K9      ACE v2.3      XXXXXX      up                     A2(3.5)                Application Control Engine Module      28
    9            ACE20-MOD-K9      Module         XXXXXX      Not Imported      ace2t_main_d      Application Control Engine Module      N/A  <---problem module
    Does any was facing samiliar problem?
    Thanks

    I think I found something related to my issue.
    In ANM operating Guidance,section"Importing ACE Modules after the Host Chassis has been Imported" mentioned some restriction. The module in slot 9 actually has samiliar situation, show module commands shows that Catalyst chassis doesn't really recognize the software version that might caused ANM not able to figure out if that module is supported or not so it makes a simple decision deny import. I will try to reboot that module see if we can fix this issue.
    "Guidelines and Restrictions
    ANM 3.0 and greater releases do not support the importing of an ACE module that contains an A1(6.x) software release or an ACE appliance that contains an A1(7.x) or A1(8.x) software release. If you attempt to import an ACE that supports one of these releases, ANM displays a message to instruct you that it failed to import the unrecognized ACE configuration and that device discovery failed.
    However, if you perform an ANM upgrade (for example, from ANM 2.2 to ANM 3.0), and the earlier ANM release contained an inventory with an ACE module that supported the A1(6x) software release or an ACE appliance that supported the A1(7.x) or A1(8.x) software release, ANM 3.0 (and greater) allows the A1(x) software release to reside in the ANM database and will support operations for the release. ANM prevents a new import of an ACE module or ACE appliance that contains the unsupported software version.
    We strongly recommend that you upgrade your ACE module or ACE appliance to a supported ACE software release, and that you instruct ANM to recognize the updated release. See the "Instructing ANM to Recognize an ACE Module Software Upgrade" section.
    See the Supported Device Tables for the Cisco Application Networking Manager for a complete list of supported ACE module and ACE appliance software releases."
    http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/application_networking_manager/5.2/user/guide/UG_manage_devices.html

  • Sticky resource not available - ACE Module

    hi,
    I am getting the below error on defining stickiness. Please assist.
    switch/Admin(config)# sticky ip-netmask 255.255.255.255 address both ACE-CKH-STICKY
    Error: sticky resource not available
    Thanks.

    Note The syslog message statistics do not include the syslogs generated from the dataplane when you enable the logging of connection setup and teardown syslog messages through the logging fastpath command.
    •regexp-Limits the amount of regular expression memory.
    •sticky-Limits the number of entries in the sticky table. You must configure a minimum value for sticky to allocate resources for sticky entries, because the sticky software receives no resources under the unlimited setting.
    •xlates-Limits the number of network and port address translations entries.
    •minimum number-Specifies the lowest acceptable value. Enter an integer from 0.00 to 100.00 percent (two-decimal places of granularity). The number argument specifies a percentage value for all contexts that are members of the class. When used with the rate keyword, the number argument specifies a value per second.
    •maximum {equal-to-min | unlimited}-Specifies the maximum resource value: either the same as the minimum value or no limit.
    Note The limit that you set for individual resources when you use the limit-resource command overrides the limit that you set for all resources when you use the limit-resource all command.
    If you lower the limits for one context (context A) in order to increase the limits of another context (context B), you may experience a delay in the configuration change because the ACE will not lower the limits of context A until the resources are no longer being used by the context.
    For example, to allocate 20 percent of all resources (minimum and maximum) to all member contexts of the resource class, enter:
    (config-resource)# limit-resource all minimum 20% maximum equal-to-min
    System Resource Maximum Values
    Resource Maximum Value
    Application Acceleration Connections
    10000 connections
    ACL Memory
    34123184 bytes
    Buffer Memory (Syslog)
    1048576 bytes
    Concurrent Connections
    1,000,000 connections (Layer 4),
    100,000 connections (SSL)
    HTTP Compression
    100 megabits per second (Mbps). You can upgrade the ACE maximum HTTP compression rate to 1 Gbps by purchasing a separate license from Cisco Systems. For more information, see the Cisco 4700 Series Application Control Engine Appliance Administration Guide.
    Management Connections
    5000 connections
    Proxy Connections (Layer 7)
    256,000 connections
    Rate
    Bandwidth
    1 gigabits per second (Gbps). You can upgrade the ACE maximum bandwidth to 2 Gbps by purchasing a separate license from Cisco Systems. For more information, see the Cisco 4700 Series Application Control Engine Appliance Administration Guide.
    Connections (any kind)
    120,000 connections per second (Layer 4), 40, 000 connections per second (Layer 7)
    MAC miss
    2000 packets per second
    Management traffic
    125,000,000 bits per second
    SSL connections
    1000 transactions per second (TPS). You can upgrade the SSL bandwidth to a maximum of 7500 TPS with a separate license. For more information, see the Cisco 4700 Series Application Control Engine Appliance Administration Guide.
    syslog
    For traffic going to the ACE (control plane), 3000 messages per second
    For traffic going through the ACE (data plane), 120,000 messages per second
    Regular Expression Memory
    1,048,576 bytes
    Sticky Entries
    800,000 table entries
    Xlates (network and port address translation entries)
    64,000 Xlates (network entries),
    1,000,000 Xlates (port address translation entries)
    Kind Regards,
    Sachin Garg
    Senior Specialist Security
    HCL Comnet Ltd.
    http://www.hclcomnet.co.in
    A-10, Sector 3, Noida- 201301
    INDIA
    Mob: +91-9911757733
    Email: [email protected]

  • ACE Redirect not working

    We have a ACE redirect configured on 3 physically seperate ACE modules with the following config. It works on one ACE Module and not on the other 2.
    Capture on the ACE and sniffer gives this error.R [bad tcp cksum 2d41!] ACE sends resets to the client. Anyone run into this issue?
    The software version is   system:    Version A2(1.0a) [build 3.0(0)A2(1.0a)
    rserver redirect Test
      webhost-redirection http://www.test.com
      inservice
    serverfarm redirect Test
      rserver Test
        inservice
    class-map match-any Test
      2 match virtual-address 192.168.10.10 tcp eq www
    policy-map type loadbalance first-match Test
      class class-default
        serverfarm Test
    class Test
        loadbalance vip inservice
        loadbalance policy Test
        loadbalance vip icmp-reply active

    Sorry maybe I didn't explain what I was getting at good enough...
    I guess I'm basically asking if there's potential for asymmetry at the site that's not working.
    For example.
    Say I have a load balanced server. It has two interfaces a "front end" and a "back end".  I manage the server on the backend from my laptop, for which the server has a route.  Now if I try to hit the public VIP of the LB, traffic is routed to the VIP, then to the server, but because the server already has a route to my laptop via the backend, it bypasses the load balancer on the return and replies directly to me, thus putting the flow out of sync and never completing the connection...
    Not saying that's it, but I've had so many asymmetry issues that are tough to figure out that It's usually one of the first things I rule out...
    It's possible if the site that's not working is local to you and the others aren't, this may be a potential issue??

  • ACE30 not syncing with primary

                       We did a faulty ACE30 module swap in a HA pair. Both the ACEs have stopped syncing since then. Below is the error message I see:
    FT Group ID: 1  My State:FSM_FT_STATE_ACTIVE    Peer State:FSM_FT_STATE_STANDBY_CONFIG
                    Context Name: Admin     Context Id: 0
                    Running Cfg Sync Status:Failed to convert/transform configuration to peer version
    Both ACE modules are running 5.2 with the same license.
    sh ft peer status from both active and standby show the same results.
    Peer Id                      : 1
    State                        : FSM_PEER_STATE_COMPATIBLE
    Maintenance mode             : MAINT_MODE_OFF
    SRG Compatibility            : COMPATIBLE
    License Compatibility        : COMPATIBLE
    FT Groups                    : 15
    Am I missing something here?

    Hey Mini,
    It sounds good it works now.
    For future reference you may see the #show crypto files to compare the SSL files which you got in the boxes.
    Additionally, please be aware that sometimes if there´s any crash in one device and generates a core dump file, they might detect that as a difference.
    Then in general you may follow these instructions:
    1) Check with #show crypto files
    2) Compare both configurations.
    3) Check #show version to see if there was a crash which you did not notice.
    Hope this helps!
    Jorge

  • Configuring ACE Module for Redundancy

    Hi Sir,
    I'm configuring fault tolerance between two ACE modules installed on two different Catalyst 6513 switches. I have one Admin context and 3 user contexts.
    Do I need to configure 4 "ft group", i.e. one context per group? E.g. config:
    ft group 1
    peer 1
    priority 110
    peer priority 105
    associate-context Admin
    inservice
    ft group 2
    peer 1
    priority 110
    peer priority 105
    associate-context ace-context1
    inservice
    ft group 3
    peer 1
    priority 105
    peer priority 110
    associate-context ace-context2
    inservice
    ft group 4
    peer 1
    priority 105
    peer priority 110
    associate-context ace-context3
    inservice
    Can you also explain the purpose of configuring an alias IP address on the client-facing VLAN interface? I understand we need an alias IP address on the server-facing VLAN interface to provide a virtual gateway address to the servers. But what's the use of an alias IP on the client-side?
    Thank you.
    B.Rgds,
    Lim TS

    Hi Gilles,
    I have configured FT for all user contexts as well as for the admin context. It works. My FT config is identical to the one I posted in this thread. Of course, one has to define the "ft interface vlan" and "ft peer" before configuring FT groups.
    I noticed a few things:
    (1) After the initial FT config, subsequent FT groups just need to be configured on the active Admin context and it will be replicated to the standby ACE, with the priority correctly reversed.
    (2) You will get the message "NOTE: Configuration mode has been disabled on all sessions" when you log in to a standby context.
    (3) The hostname of the active Admin context is not synced to the standby ACE. Do you know why?
    One issue I encountered in one of the user contexts is as follows:
    ace1/ace-context-1# sh run int
    Generating configuration....
    interface vlan 950
    description *** Client-Facing VLAN ***
    ip address 10.1.35.5 255.255.255.0
    alias 10.1.35.4 255.255.255.0
    peer ip address 10.1.35.6 255.255.255.0
    access-group input ACL_VL950_IN
    service-policy input REMOTE_MGMT
    service-policy input MY_LB
    no shutdown
    interface vlan 951
    description *** Connection to Real Servers ***
    ip address 10.1.36.2 255.255.255.0
    alias 10.1.36.1 255.255.255.0
    peer ip address 10.1.36.3 255.255.255.0
    access-group input ACL_VL951_IN
    service-policy input NAT_REAL
    no shutdown
    This is the active context. It can ping to 10.1.35.4 (alias) and 10.1.35.6 (peer) over VLAN 950 (client-side). It can ping alias 10.1.36.1 over VLAN 951 (server-side) but can't ping to peer 10.1.36.3. The ACL_VL951_IN permits ip any any. Do you know why?
    Secondly, I can remotely ping to alias 10.1.35.4 but can't telnet to it (I'm expecting it to telnet to the active context). I have to telnet to 10.1.35.5. Is this normal behavior?
    Please advise.
    Thank you.
    B.Rgds,
    Lim TS

  • "Kernel panic - not syncing: Attempted to kill init!" on shutdown

    For several years now, I've been happily using Arch. I'm quite a seasoned user. I've solved countless errors and problems with my systems on 3 different machines, but I don't know how to fix this one. I've searched the forum and asked google -- got no answer.
    Since systemd upgrade on my Asus laptop, shutdown and reboot broke down. The other machine with Arch works fine (systemd installed), but that's a stationary computer.
    I don't know what may be wrong... The system is upgraded to the full. The error displayed by kernel is as follows:
    Kernel panic - not syncing: Attempted to kill init!
    And photo of it happening: http://i.imgur.com/kewfbYv.jpg
    This happens every time I try to shut down or reboot the laptop. (I'm using the poweroff and reboot commands). I have to press the power button for a while to force poweroff. It's really annoying.
    Everything works just fine except this kernel panic. I'm using catalyst drivers. Other than that - nothing "unusual".
    Boot journal:
    -- Logs begin at Mon 2012-12-31 05:00:25 CET, end at Sat 2013-01-26 12:27:00 CET. --
    Jan 26 12:20:45 further systemd-journal[145]: Allowing runtime journal files to grow to 171.5M.
    Jan 26 12:20:45 further kernel: Initializing cgroup subsys cpuset
    Jan 26 12:20:45 further kernel: Initializing cgroup subsys cpu
    Jan 26 12:20:45 further kernel: Linux version 3.7.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 21 23:05:29 CET 2013
    Jan 26 12:20:45 further kernel: Command line: root=/dev/sda6 ro nomodeset init=/sbin/init rootfstype=ext4
    Jan 26 12:20:45 further kernel: e820: BIOS-provided physical RAM map:
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x0000000000100000-0x000000008f6bffff] usable
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f6c0000-0x000000008f702fff] ACPI NVS
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f703000-0x000000008f711fff] ACPI data
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f712000-0x000000008f828fff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f829000-0x000000008f838fff] ACPI NVS
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f839000-0x000000008f867fff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f868000-0x000000008f868fff] usable
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f869000-0x000000008f871fff] ACPI NVS
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f872000-0x000000008f883fff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f884000-0x000000008f891fff] ACPI NVS
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f892000-0x000000008f893fff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f894000-0x000000008f89afff] ACPI NVS
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f89b000-0x000000008f89dfff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f89e000-0x000000008f8a6fff] ACPI NVS
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f8a7000-0x000000008f8cdfff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008f8ce000-0x000000008fad0fff] ACPI NVS
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008fad1000-0x000000008fd45fff] usable
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008fd46000-0x000000008fef6fff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x000000008fef7000-0x000000008fefffff] usable
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    Jan 26 12:20:45 further kernel: BIOS-e820: [mem 0x0000000100001000-0x000000014effffff] usable
    Jan 26 12:20:45 further kernel: NX (Execute Disable) protection: active
    Jan 26 12:20:45 further kernel: DMI 2.7 present.
    Jan 26 12:20:45 further kernel: DMI: ASUSTeK Computer Inc. K43TA/K43TA, BIOS 214 04/06/2012
    Jan 26 12:20:45 further kernel: e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    Jan 26 12:20:45 further kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Jan 26 12:20:45 further kernel: No AGP bridge found
    Jan 26 12:20:45 further kernel: e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
    Jan 26 12:20:45 further kernel: MTRR default type: uncachable
    Jan 26 12:20:45 further kernel: MTRR fixed ranges enabled:
    Jan 26 12:20:45 further kernel: 00000-9FFFF write-back
    Jan 26 12:20:45 further kernel: A0000-BFFFF write-through
    Jan 26 12:20:45 further kernel: C0000-CEFFF write-protect
    Jan 26 12:20:45 further kernel: CF000-E7FFF uncachable
    Jan 26 12:20:45 further kernel: E8000-FFFFF write-protect
    Jan 26 12:20:45 further kernel: MTRR variable ranges enabled:
    Jan 26 12:20:45 further kernel: 0 base 0000000000 mask FF80000000 write-back
    Jan 26 12:20:45 further kernel: 1 base 0080000000 mask FFF0000000 write-back
    Jan 26 12:20:45 further kernel: 2 base 008FF00000 mask FFFFF00000 uncachable
    Jan 26 12:20:45 further kernel: 3 disabled
    Jan 26 12:20:45 further kernel: 4 disabled
    Jan 26 12:20:45 further kernel: 5 disabled
    Jan 26 12:20:45 further kernel: 6 disabled
    Jan 26 12:20:45 further kernel: 7 disabled
    Jan 26 12:20:45 further kernel: TOM2: 000000014f000000 aka 5360M
    Jan 26 12:20:45 further kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jan 26 12:20:45 further kernel: e820: update [mem 0x8ff00000-0xffffffff] usable ==> reserved
    Jan 26 12:20:45 further kernel: e820: last_pfn = 0x8ff00 max_arch_pfn = 0x400000000
    Jan 26 12:20:45 further kernel: found SMP MP-table at [mem 0x000fce90-0x000fce9f] mapped at [ffff8800000fce90]
    Jan 26 12:20:45 further kernel: initial memory mapped: [mem 0x00000000-0x1fffffff]
    Jan 26 12:20:45 further kernel: Base memory trampoline at [ffff880000097000] 97000 size 24576
    Jan 26 12:20:45 further kernel: Using GB pages for direct mapping
    Jan 26 12:20:45 further kernel: init_memory_mapping: [mem 0x00000000-0x8fefffff]
    Jan 26 12:20:45 further kernel: [mem 0x00000000-0x7fffffff] page 1G
    Jan 26 12:20:45 further kernel: [mem 0x80000000-0x8fdfffff] page 2M
    Jan 26 12:20:45 further kernel: [mem 0x8fe00000-0x8fefffff] page 4k
    Jan 26 12:20:45 further kernel: kernel direct mapping tables up to 0x8fefffff @ [mem 0x1fffd000-0x1fffffff]
    Jan 26 12:20:45 further kernel: init_memory_mapping: [mem 0x100001000-0x14effffff]
    Jan 26 12:20:45 further kernel: [mem 0x100001000-0x1001fffff] page 4k
    Jan 26 12:20:45 further kernel: [mem 0x100200000-0x14effffff] page 2M
    Jan 26 12:20:45 further kernel: kernel direct mapping tables up to 0x14effffff @ [mem 0x8fefc000-0x8fefffff]
    Jan 26 12:20:45 further kernel: RAMDISK: [mem 0x37d07000-0x37feffff]
    Jan 26 12:20:45 further kernel: ACPI: RSDP 00000000000f0450 00024 (v02 _ASUS_)
    Jan 26 12:20:45 further kernel: ACPI: XSDT 000000008f703068 00054 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    Jan 26 12:20:45 further kernel: ACPI: FACP 000000008f70f1a0 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
    Jan 26 12:20:45 further kernel: ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120913/tbfadt-598)
    Jan 26 12:20:45 further kernel: ACPI: DSDT 000000008f703150 0C050 (v02 _ASUS_ Notebook 00000000 INTL 20091112)
    Jan 26 12:20:45 further kernel: ACPI: FACS 000000008f89af80 00040
    Jan 26 12:20:45 further kernel: ACPI: APIC 000000008f70f298 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    Jan 26 12:20:45 further kernel: ACPI: MCFG 000000008f70f310 0003C (v01 _ASUS_ GMCH945. 01072009 MSFT 00000097)
    Jan 26 12:20:45 further kernel: ACPI: HPET 000000008f70f350 00038 (v01 _ASUS_ Notebook 01072009 AMI 00000004)
    Jan 26 12:20:45 further kernel: ACPI: SSDT 000000008f70f388 00726 (v01 _ASUS_ POWERNOW 00000001 AMD 00000001)
    Jan 26 12:20:45 further kernel: ACPI: SSDT 000000008f70fab0 0190A (v02 _ASUS_ ALIB 00000001 MSFT 04000000)
    Jan 26 12:20:45 further kernel: ACPI: Local APIC address 0xfee00000
    Jan 26 12:20:45 further kernel: No NUMA configuration found
    Jan 26 12:20:45 further kernel: Faking a node at [mem 0x0000000000000000-0x000000014effffff]
    Jan 26 12:20:45 further kernel: Initmem setup node 0 [mem 0x00000000-0x14effffff]
    Jan 26 12:20:45 further kernel: NODE_DATA [mem 0x14effc000-0x14effffff]
    Jan 26 12:20:45 further kernel: [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014e5fffff] on node 0
    Jan 26 12:20:45 further kernel: Zone ranges:
    Jan 26 12:20:45 further kernel: DMA [mem 0x00010000-0x00ffffff]
    Jan 26 12:20:45 further kernel: DMA32 [mem 0x01000000-0xffffffff]
    Jan 26 12:20:45 further kernel: Normal [mem 0x100000000-0x14effffff]
    Jan 26 12:20:45 further kernel: Movable zone start for each node
    Jan 26 12:20:45 further kernel: Early memory node ranges
    Jan 26 12:20:45 further kernel: node 0: [mem 0x00010000-0x0009cfff]
    Jan 26 12:20:45 further kernel: node 0: [mem 0x00100000-0x8f6bffff]
    Jan 26 12:20:45 further kernel: node 0: [mem 0x8f868000-0x8f868fff]
    Jan 26 12:20:45 further kernel: node 0: [mem 0x8fad1000-0x8fd45fff]
    Jan 26 12:20:45 further kernel: node 0: [mem 0x8fef7000-0x8fefffff]
    Jan 26 12:20:45 further kernel: node 0: [mem 0x100001000-0x14effffff]
    Jan 26 12:20:45 further kernel: On node 0 totalpages: 911563
    Jan 26 12:20:45 further kernel: DMA zone: 64 pages used for memmap
    Jan 26 12:20:45 further kernel: DMA zone: 6 pages reserved
    Jan 26 12:20:45 further kernel: DMA zone: 3911 pages, LIFO batch:0
    Jan 26 12:20:45 further kernel: DMA32 zone: 16320 pages used for memmap
    Jan 26 12:20:45 further kernel: DMA32 zone: 567679 pages, LIFO batch:31
    Jan 26 12:20:45 further kernel: Normal zone: 5056 pages used for memmap
    Jan 26 12:20:45 further kernel: Normal zone: 318527 pages, LIFO batch:31
    Jan 26 12:20:45 further kernel: ACPI: PM-Timer IO Port: 0x808
    Jan 26 12:20:45 further kernel: ACPI: Local APIC address 0xfee00000
    Jan 26 12:20:45 further kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Jan 26 12:20:45 further kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Jan 26 12:20:45 further kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    Jan 26 12:20:45 further kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
    Jan 26 12:20:45 further kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    Jan 26 12:20:45 further kernel: ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    Jan 26 12:20:45 further kernel: IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
    Jan 26 12:20:45 further kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 26 12:20:45 further kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Jan 26 12:20:45 further kernel: ACPI: IRQ0 used by override.
    Jan 26 12:20:45 further kernel: ACPI: IRQ2 used by override.
    Jan 26 12:20:45 further kernel: ACPI: IRQ9 used by override.
    Jan 26 12:20:45 further kernel: Using ACPI (MADT) for SMP configuration information
    Jan 26 12:20:45 further kernel: ACPI: HPET id: 0xffffffff base: 0xfed00000
    Jan 26 12:20:45 further kernel: smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    Jan 26 12:20:45 further kernel: nr_irqs_gsi: 40
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f6c0000 - 000000008f703000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f703000 - 000000008f712000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f712000 - 000000008f829000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f829000 - 000000008f839000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f839000 - 000000008f868000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f869000 - 000000008f872000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f872000 - 000000008f884000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f884000 - 000000008f892000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f892000 - 000000008f894000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f894000 - 000000008f89b000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f89b000 - 000000008f89e000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f89e000 - 000000008f8a7000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f8a7000 - 000000008f8ce000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008f8ce000 - 000000008fad1000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008fd46000 - 000000008fef7000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 000000008ff00000 - 00000000e0000000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    Jan 26 12:20:45 further kernel: PM: Registered nosave memory: 0000000100000000 - 0000000100001000
    Jan 26 12:20:45 further kernel: e820: [mem 0x8ff00000-0xdfffffff] available for PCI devices
    Jan 26 12:20:45 further kernel: Booting paravirtualized kernel on bare hardware
    Jan 26 12:20:45 further kernel: setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    Jan 26 12:20:45 further kernel: PERCPU: Embedded 28 pages/cpu @ffff88014ec00000 s84544 r8192 d21952 u524288
    Jan 26 12:20:45 further kernel: pcpu-alloc: s84544 r8192 d21952 u524288 alloc=1*2097152
    Jan 26 12:20:45 further kernel: pcpu-alloc: [0] 0 1 2 3
    Jan 26 12:20:45 further kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 890117
    Jan 26 12:20:45 further kernel: Policy zone: Normal
    Jan 26 12:20:45 further kernel: Kernel command line: root=/dev/sda6 ro nomodeset init=/sbin/init rootfstype=ext4
    Jan 26 12:20:45 further kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 26 12:20:45 further kernel: __ex_table already sorted, skipping sort
    Jan 26 12:20:45 further kernel: Checking aperture...
    Jan 26 12:20:45 further kernel: No AGP bridge found
    Jan 26 12:20:45 further kernel: Calgary: detecting Calgary via BIOS EBDA area
    Jan 26 12:20:45 further kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Jan 26 12:20:45 further kernel: Memory: 3508092k/5488640k available (4832k kernel code, 1842388k absent, 138160k reserved, 4077k data, 808k init)
    Jan 26 12:20:45 further kernel: SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Jan 26 12:20:45 further kernel: Preemptible hierarchical RCU implementation.
    Jan 26 12:20:45 further kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jan 26 12:20:45 further kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jan 26 12:20:45 further kernel: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    Jan 26 12:20:45 further kernel: NR_IRQS:4352 nr_irqs:712 16
    Jan 26 12:20:45 further kernel: Extended CMOS year: 2000
    Jan 26 12:20:45 further kernel: Console: colour VGA+ 80x25
    Jan 26 12:20:45 further kernel: console [tty0] enabled
    Jan 26 12:20:45 further kernel: allocated 14680064 bytes of page_cgroup
    Jan 26 12:20:45 further kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jan 26 12:20:45 further kernel: hpet clockevent registered
    Jan 26 12:20:45 further kernel: tsc: Fast TSC calibration using PIT
    Jan 26 12:20:45 further kernel: tsc: Detected 1896.600 MHz processor
    Jan 26 12:20:45 further kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.25 BogoMIPS (lpj=6322000)
    Jan 26 12:20:45 further kernel: pid_max: default: 32768 minimum: 301
    Jan 26 12:20:45 further kernel: Security Framework initialized
    Jan 26 12:20:45 further kernel: AppArmor: AppArmor disabled by boot time parameter
    Jan 26 12:20:45 further kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jan 26 12:20:45 further kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Jan 26 12:20:45 further kernel: Mount-cache hash table entries: 256
    Jan 26 12:20:45 further kernel: Initializing cgroup subsys cpuacct
    Jan 26 12:20:45 further kernel: Initializing cgroup subsys memory
    Jan 26 12:20:45 further kernel: Initializing cgroup subsys devices
    Jan 26 12:20:45 further kernel: Initializing cgroup subsys freezer
    Jan 26 12:20:45 further kernel: Initializing cgroup subsys net_cls
    Jan 26 12:20:45 further kernel: Initializing cgroup subsys blkio
    Jan 26 12:20:45 further kernel: tseg: 008ff00000
    Jan 26 12:20:45 further kernel: CPU: Physical Processor ID: 0
    Jan 26 12:20:45 further kernel: CPU: Processor Core ID: 0
    Jan 26 12:20:45 further kernel: mce: CPU supports 6 MCE banks
    Jan 26 12:20:45 further kernel: [120B blob data]
    Jan 26 12:20:45 further kernel: Freeing SMP alternatives: 16k freed
    Jan 26 12:20:45 further kernel: ACPI: Core revision 20120913
    Jan 26 12:20:45 further kernel: ftrace: allocating 18585 entries in 73 pages
    Jan 26 12:20:45 further kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jan 26 12:20:45 further kernel: smpboot: CPU0: AMD A4-3300M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
    Jan 26 12:20:45 further kernel: Performance Events: AMD PMU driver.
    Jan 26 12:20:45 further kernel: ... version: 0
    Jan 26 12:20:45 further kernel: ... bit width: 48
    Jan 26 12:20:45 further kernel: ... generic registers: 4
    Jan 26 12:20:45 further kernel: ... value mask: 0000ffffffffffff
    Jan 26 12:20:45 further kernel: ... max period: 00007fffffffffff
    Jan 26 12:20:45 further kernel: ... fixed-purpose events: 0
    Jan 26 12:20:45 further kernel: ... event mask: 000000000000000f
    Jan 26 12:20:45 further kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Jan 26 12:20:45 further kernel: smpboot: Booting Node 0, Processors #1
    Jan 26 12:20:45 further kernel: Brought up 2 CPUs
    Jan 26 12:20:45 further kernel: smpboot: Total of 2 processors activated (7589.50 BogoMIPS)
    Jan 26 12:20:45 further kernel: devtmpfs: initialized
    Jan 26 12:20:45 further kernel: PM: Registering ACPI NVS region [mem 0x8f6c0000-0x8f702fff] (274432 bytes)
    Jan 26 12:20:45 further kernel: PM: Registering ACPI NVS region [mem 0x8f829000-0x8f838fff] (65536 bytes)
    Jan 26 12:20:45 further kernel: PM: Registering ACPI NVS region [mem 0x8f869000-0x8f871fff] (36864 bytes)
    Jan 26 12:20:45 further kernel: PM: Registering ACPI NVS region [mem 0x8f884000-0x8f891fff] (57344 bytes)
    Jan 26 12:20:45 further kernel: PM: Registering ACPI NVS region [mem 0x8f894000-0x8f89afff] (28672 bytes)
    Jan 26 12:20:45 further kernel: PM: Registering ACPI NVS region [mem 0x8f89e000-0x8f8a6fff] (36864 bytes)
    Jan 26 12:20:45 further kernel: PM: Registering ACPI NVS region [mem 0x8f8ce000-0x8fad0fff] (2109440 bytes)
    Jan 26 12:20:45 further kernel: NET: Registered protocol family 16
    Jan 26 12:20:45 further kernel: ACPI: bus type pci registered
    Jan 26 12:20:45 further kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jan 26 12:20:45 further kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    Jan 26 12:20:45 further kernel: PCI: Using configuration type 1 for base access
    Jan 26 12:20:45 further kernel: bio: create slab <bio-0> at 0
    Jan 26 12:20:45 further kernel: ACPI: Added _OSI(Module Device)
    Jan 26 12:20:45 further kernel: ACPI: Added _OSI(Processor Device)
    Jan 26 12:20:45 further kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jan 26 12:20:45 further kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jan 26 12:20:45 further kernel: ACPI: EC: Look up EC in DSDT
    Jan 26 12:20:45 further kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Jan 26 12:20:45 further kernel: ACPI: Interpreter enabled
    Jan 26 12:20:45 further kernel: ACPI: (supports S0 S3 S4 S5)
    Jan 26 12:20:45 further kernel: ACPI: Using IOAPIC for interrupt routing
    Jan 26 12:20:45 further kernel: [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    Jan 26 12:20:45 further kernel: [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    Jan 26 12:20:45 further kernel: ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    Jan 26 12:20:45 further kernel: ACPI: No dock devices found.
    Jan 26 12:20:45 further kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Jan 26 12:20:45 further kernel: \_SB_.PCI0:_OSC request failed
    Jan 26 12:20:45 further kernel: _OSC request data:1 8 1f
    Jan 26 12:20:45 further kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jan 26 12:20:45 further kernel: PCI host bridge to bus 0000:00
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: root bus resource [io 0x1778-0xffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
    Jan 26 12:20:45 further kernel: pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
    Jan 26 12:20:45 further kernel: pci 0000:00:01.0: [1002:9648] type 00 class 0x030000
    Jan 26 12:20:45 further kernel: pci 0000:00:01.0: reg 10: [mem 0xb0000000-0xbfffffff pref]
    Jan 26 12:20:45 further kernel: pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
    Jan 26 12:20:45 further kernel: pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
    Jan 26 12:20:45 further kernel: pci 0000:00:01.0: supports D1 D2
    Jan 26 12:20:45 further kernel: pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
    Jan 26 12:20:45 further kernel: pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
    Jan 26 12:20:45 further kernel: pci 0000:00:01.1: supports D1 D2
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    Jan 26 12:20:45 further kernel: pci 0000:00:04.0: [1022:1709] type 01 class 0x060400
    Jan 26 12:20:45 further kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    Jan 26 12:20:45 further kernel: pci 0000:00:05.0: [1022:170a] type 01 class 0x060400
    Jan 26 12:20:45 further kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    Jan 26 12:20:45 further kernel: pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
    Jan 26 12:20:45 further kernel: pci 0000:00:10.0: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
    Jan 26 12:20:45 further kernel: pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    Jan 26 12:20:45 further kernel: pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    Jan 26 12:20:45 further kernel: pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
    Jan 26 12:20:45 further kernel: pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
    Jan 26 12:20:45 further kernel: pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
    Jan 26 12:20:45 further kernel: pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
    Jan 26 12:20:45 further kernel: pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
    Jan 26 12:20:45 further kernel: pci 0000:00:11.0: reg 24: [mem 0xfeb4d000-0xfeb4d7ff]
    Jan 26 12:20:45 further kernel: pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    Jan 26 12:20:45 further kernel: pci 0000:00:12.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
    Jan 26 12:20:45 further kernel: pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    Jan 26 12:20:45 further kernel: pci 0000:00:12.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
    Jan 26 12:20:45 further kernel: pci 0000:00:12.2: supports D1 D2
    Jan 26 12:20:45 further kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Jan 26 12:20:45 further kernel: pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    Jan 26 12:20:45 further kernel: pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    Jan 26 12:20:45 further kernel: pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
    Jan 26 12:20:45 further kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    Jan 26 12:20:45 further kernel: pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    Jan 26 12:20:45 further kernel: pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
    Jan 26 12:20:45 further kernel: pci 0000:00:14.7: reg 10: [mem 0xfeb4a000-0xfeb4a0ff 64bit]
    Jan 26 12:20:45 further kernel: pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
    Jan 26 12:20:45 further kernel: pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
    Jan 26 12:20:45 further kernel: pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
    Jan 26 12:20:45 further kernel: pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
    Jan 26 12:20:45 further kernel: pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
    Jan 26 12:20:45 further kernel: pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
    Jan 26 12:20:45 further kernel: pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
    Jan 26 12:20:45 further kernel: pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
    Jan 26 12:20:45 further kernel: pci 0000:01:00.0: [1002:6741] type 00 class 0x030000
    Jan 26 12:20:45 further kernel: pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 26 12:20:45 further kernel: pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea3ffff 64bit]
    Jan 26 12:20:45 further kernel: pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
    Jan 26 12:20:45 further kernel: pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
    Jan 26 12:20:45 further kernel: pci 0000:01:00.0: supports D1 D2
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 26 12:20:45 further kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    Jan 26 12:20:45 further kernel: pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
    Jan 26 12:20:45 further kernel: pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
    Jan 26 12:20:45 further kernel: pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
    Jan 26 12:20:45 further kernel: pci 0000:02:00.0: supports D1 D2
    Jan 26 12:20:45 further kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 26 12:20:45 further kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    Jan 26 12:20:45 further kernel: pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    Jan 26 12:20:45 further kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    Jan 26 12:20:45 further kernel: pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
    Jan 26 12:20:45 further kernel: pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe90ffff 64bit]
    Jan 26 12:20:45 further kernel: pci 0000:03:00.0: supports D1
    Jan 26 12:20:45 further kernel: pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
    Jan 26 12:20:45 further kernel: pci 0000:00:05.0: PCI bridge to [bus 03]
    Jan 26 12:20:45 further kernel: pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: bridge window [io 0x1778-0xffff] (subtractive decode)
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
    Jan 26 12:20:45 further kernel: \_SB_.PCI0:_OSC request failed
    Jan 26 12:20:45 further kernel: _OSC request data:1 1f 1f
    Jan 26 12:20:45 further kernel: pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    Jan 26 12:20:45 further kernel: pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN24] (IRQs *24)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN25] (IRQs *25)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN26] (IRQs *26)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN27] (IRQs *27)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN28] (IRQs *28)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN29] (IRQs *29)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN30] (IRQs *30)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN31] (IRQs *31)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN32] (IRQs *32)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN33] (IRQs *33)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN34] (IRQs *34)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN35] (IRQs *35)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN36] (IRQs *36)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN37] (IRQs *37)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN38] (IRQs *38)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN39] (IRQs *39)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN40] (IRQs *40)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN41] (IRQs *41)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN42] (IRQs *42)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN43] (IRQs *43)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN44] (IRQs *44)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN45] (IRQs *45)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN46] (IRQs *46)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN47] (IRQs *47)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN48] (IRQs *48)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN49] (IRQs *49)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN50] (IRQs *50)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN51] (IRQs *51)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN52] (IRQs *52)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN53] (IRQs *53)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN54] (IRQs *54)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LN55] (IRQs *55)
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
    Jan 26 12:20:45 further kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
    Jan 26 12:20:45 further kernel: vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    Jan 26 12:20:45 further kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    Jan 26 12:20:45 further kernel: vgaarb: loaded
    Jan 26 12:20:45 further kernel: vgaarb: bridge control possible 0000:01:00.0
    Jan 26 12:20:45 further kernel: vgaarb: no bridge control possible 0000:00:01.0
    Jan 26 12:20:45 further kernel: PCI: Using ACPI for IRQ routing
    Jan 26 12:20:45 further kernel: PCI: pci_cache_line_size set to 64 bytes
    Jan 26 12:20:45 further kernel: e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    Jan 26 12:20:45 further kernel: e820: reserve RAM buffer [mem 0x8f6c0000-0x8fffffff]
    Jan 26 12:20:45 further kernel: e820: reserve RAM buffer [mem 0x8f869000-0x8fffffff]
    Jan 26 12:20:45 further kernel: e820: reserve RAM buffer [mem 0x8fd46000-0x8fffffff]
    Jan 26 12:20:45 further kernel: e820: reserve RAM buffer [mem 0x8ff00000-0x8fffffff]
    Jan 26 12:20:45 further kernel: e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
    Jan 26 12:20:45 further kernel: NetLabel: Initializing
    Jan 26 12:20:45 further kernel: NetLabel: domain hash size = 128
    Jan 26 12:20:45 further kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jan 26 12:20:45 further kernel: NetLabel: unlabeled traffic allowed by default
    Jan 26 12:20:45 further kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Jan 26 12:20:45 further kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    Jan 26 12:20:45 further kernel: Switching to clocksource hpet
    Jan 26 12:20:45 further kernel: pnp: PnP ACPI init
    Jan 26 12:20:45 further kernel: ACPI: bus type pnp registered
    Jan 26 12:20:45 further kernel: pnp 00:00: [bus 00-ff]
    Jan 26 12:20:45 further kernel: pnp 00:00: [io 0x0cf8-0x0cff]
    Jan 26 12:20:45 further kernel: pnp 00:00: [io 0x0000-0x03af window]
    Jan 26 12:20:45 further kernel: pnp 00:00: [io 0x03e0-0x0cf7 window]
    Jan 26 12:20:45 further kernel: pnp 00:00: [io 0x03b0-0x03df window]
    Jan 26 12:20:45 further kernel: pnp 00:00: [io 0x1778-0xffff window]
    Jan 26 12:20:45 further kernel: pnp 00:00: [mem 0x000a0000-0x000bffff window]
    Jan 26 12:20:45 further kernel: pnp 00:00: [mem 0x000c0000-0x000dffff window]
    Jan 26 12:20:45 further kernel: pnp 00:00: [mem 0xb0000000-0xffffffff window]
    Jan 26 12:20:45 further kernel: pnp 00:00: [mem 0x00000000 window]
    Jan 26 12:20:45 further kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    Jan 26 12:20:45 further kernel: pnp 00:01: [mem 0xe0000000-0xefffffff]
    Jan 26 12:20:45 further kernel: system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    Jan 26 12:20:45 further kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0010-0x001f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0022-0x003f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0063]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0065]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0067-0x006f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0072-0x007f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0080]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0084-0x0086]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0088]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x008c-0x008e]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0090-0x009f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x00a2-0x00bf]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x00b1]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x00e0-0x00ef]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x04d0-0x04d1]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x040b]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x04d6]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0c00-0x0c01]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0c14]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0c50-0x0c51]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0c52]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0c6c]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0c6f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0cd0-0x0cd1]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0cd2-0x0cd3]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0cd4-0x0cd5]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0cd6-0x0cd7]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0cd8-0x0cdf]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0800-0x089f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0000-0x000f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0b20-0x0b3f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0900-0x090f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0910-0x091f]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0xfe00-0xfefe]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0060-0x005f disabled]
    Jan 26 12:20:45 further kernel: pnp 00:02: [io 0x0064-0x0063 disabled]
    Jan 26 12:20:45 further kernel: pnp 00:02: [mem 0xfec00000-0xfec00fff]
    Jan 26 12:20:45 further kernel: pnp 00:02: [mem 0xfee00000-0xfee00fff]
    Jan 26 12:20:45 further kernel: pnp 00:02: [mem 0xfed80000-0xfed8ffff]
    Jan 26 12:20:45 further kernel: pnp 00:02: [mem 0xfed61000-0xfed70fff]
    Jan 26 12:20:45 further kernel: pnp 00:02: [mem 0xfec10000-0xfec10fff]
    Jan 26 12:20:45 further kernel: pnp 00:02: [mem 0xfed00000-0xfed00fff]
    Jan 26 12:20:45 further kernel: pnp 00:02: [mem 0xff000000-0xffffffff]
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x04d0-0x04d1] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x040b] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x04d6] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0c00-0x0c01] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0c14] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0c50-0x0c51] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0c52] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0c6c] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0c6f] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0cd4-0x0cd5] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0cd6-0x0cd7] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0cd8-0x0cdf] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0800-0x089f] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0b20-0x0b3f] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0900-0x090f] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0x0910-0x091f] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [io 0xfe00-0xfefe] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
    Jan 26 12:20:45 further kernel: system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: [mem 0xff000000-0xffffffff] has been reserved
    Jan 26 12:20:45 further kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 26 12:20:45 further kernel: pnp 00:03: [dma 4]
    Jan 26 12:20:45 further kernel: pnp 00:03: [io 0x0000-0x000f]
    Jan 26 12:20:45 further kernel: pnp 00:03: [io 0x0081-0x0083]
    Jan 26 12:20:45 further kernel: pnp 00:03: [io 0x0087]
    Jan 26 12:20:45 further kernel: pnp 00:03: [io 0x0089-0x008b]
    Jan 26 12:20:45 further kernel: pnp 00:03: [io 0x008f]
    Jan 26 12:20:45 further kernel: pnp 00:03: [io 0x00c0-0x00df]
    Jan 26 12:20:45 further kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    Jan 26 12:20:45 further kernel: pnp 00:04: [io 0x0070-0x0071]
    Jan 26 12:20:45 further kernel: pnp 00:04: [irq 8]
    Jan 26 12:20:45 further kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jan 26 12:20:45 further kernel: pnp 00:05: [io 0x0061]
    Jan 26 12:20:45 further kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x0010-0x001f]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x0022-0x003f]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x0044-0x005f]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x0072-0x007f]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x0080]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x0084-0x0086]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x0088]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x008c-0x008e]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x0090-0x009f]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x00a2-0x00bf]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x00e0-0x00ef]
    Jan 26 12:20:45 further kernel: pnp 00:06: [io 0x04d0-0x04d1]
    Jan 26 12:20:45 further kernel: system 00:06: [io 0x04d0-0x04d1] has been reserved
    Jan 26 12:20:45 further kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 26 12:20:45 further kernel: pnp 00:07: [io 0x00f0-0x00ff]
    Jan 26 12:20:45 further kernel: pnp 00:07: [irq 13]
    Jan 26 12:20:45 further kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    Jan 26 12:20:45 further kernel: pnp 00:08: [io 0x1770-0x1777]
    Jan 26 12:20:45 further kernel: system 00:08: [io 0x1770-0x1777] has been reserved
    Jan 26 12:20:45 further kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 26 12:20:45 further kernel: pnp 00:09: [irq 12]
    Jan 26 12:20:45 further kernel: pnp 00:09: Plug and Play ACPI device, IDs ETD0102 PNP0f13 (active)
    Jan 26 12:20:45 further kernel: pnp 00:0a: [io 0x0060]
    Jan 26 12:20:45 further kernel: pnp 00:0a: [io 0x0064]
    Jan 26 12:20:45 further kernel: pnp 00:0a: [irq 1]
    Jan 26 12:20:45 further kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    Jan 26 12:20:45 further kernel: pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
    Jan 26 12:20:45 further kernel: pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
    Jan 26 12:20:45 further kernel: system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 26 12:20:45 further kernel: pnp 00:0c: [mem 0xfed00000-0xfed003ff]
    Jan 26 12:20:45 further kernel: pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
    Jan 26 12:20:45 further kernel: pnp: PnP ACPI: found 13 devices
    Jan 26 12:20:45 further kernel: ACPI: ACPI bus type pnp unregistered
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
    Jan 26 12:20:45 further kernel: pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 26 12:20:45 further kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    Jan 26 12:20:45 further kernel: pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    Jan 26 12:20:45 further kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    Jan 26 12:20:45 further kernel: pci 0000:00:05.0: PCI bridge to [bus 03]
    Jan 26 12:20:45 further kernel: pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
    Jan 26 12:20:45 further kernel: pci 0000:00:14.4: PCI bridge to [bus 04]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: resource 7 [io 0x1778-0xffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 26 12:20:45 further kernel: pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    Jan 26 12:20:45 further kernel: pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
    Jan 26 12:20:45 further kernel: pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
    Jan 26 12:20:45 further kernel: pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
    Jan 26 12:20:45 further kernel: pci_bus 0000:04: resource 7 [io 0x1778-0xffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
    Jan 26 12:20:45 further kernel: pci_bus 0000:04: resource 10 [mem 0xb0000000-0xffffffff]
    Jan 26 12:20:45 further kernel: NET: Registered protocol family 2
    Jan 26 12:20:45 further kernel: TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    Jan 26 12:20:45 further kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Jan 26 12:20:45 further kernel: TCP: Hash tables configured (established 524288 bind 65536)
    Jan 26 12:20:45 further kernel: TCP: reno registered
    Jan 26 12:20:45 further kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 26 12:20:45 further kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 26 12:20:45 further kernel: NET: Registered protocol family 1
    Jan 26 12:20:45 further kernel: pci 0000:00:01.0: Boot video device
    Jan 26 12:20:45 further kernel: PCI: CLS 64 bytes, default 64
    Jan 26 12:20:45 further kernel: Unpacking initramfs...
    Jan 26 12:20:45 further kernel: Freeing initrd memory: 2980k freed
    Jan 26 12:20:45 further kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Jan 26 12:20:45 further kernel: software IO TLB [mem 0x8b6c0000-0x8f6bffff] (64MB) mapped at [ffff88008b6c0000-ffff88008f6bffff]
    Jan 26 12:20:45 further kernel: LVT offset 0 assigned for vector 0x400
    Jan 26 12:20:45 further kernel: perf: AMD IBS detected (0x000000ff)
    Jan 26 12:20:45 further kernel: audit: initializing netlink socket (disabled)
    Jan 26 12:20:45 further kernel: type=2000 audit(1359202838.726:1): initialized
    Jan 26 12:20:45 further kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Jan 26 12:20:45 further kernel: VFS: Disk quotas dquot_6.5.2
    Jan 26 12:20:45 further kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jan 26 12:20:45 further kernel: msgmni has been set to 6857
    Jan 26 12:20:45 further kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jan 26 12:20:45 further kernel: io scheduler noop registered
    Jan 26 12:20:45 further kernel: io scheduler deadline registered
    Jan 26 12:20:45 further kernel: io scheduler cfq registered (default)
    Jan 26 12:20:45 further kernel: GHES: HEST is not enabled!
    Jan 26 12:20:45 further kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 26 12:20:45 further kernel: Linux agpgart interface v0.103
    Jan 26 12:20:45 further kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Jan 26 12:20:45 further kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jan 26 12:20:45 further kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Jan 26 12:20:45 further kernel: mousedev: PS/2 mouse device common for all mice
    Jan 26 12:20:45 further kernel: rtc_cmos 00:04: RTC can wake from S4
    Jan 26 12:20:45 further kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    Jan 26 12:20:45 further kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    Jan 26 12:20:45 further kernel: cpuidle: using governor ladder
    Jan 26 12:20:45 further kernel: cpuidle: using governor menu
    Jan 26 12:20:45 further kernel: drop_monitor: Initializing network drop monitor service
    Jan 26 12:20:45 further kernel: TCP: cubic registered
    Jan 26 12:20:45 further kernel: NET: Registered protocol family 10
    Jan 26 12:20:45 further kernel: NET: Registered protocol family 17
    Jan 26 12:20:45 further kernel: Key type dns_resolver registered
    Jan 26 12:20:45 further kernel: PM: Hibernation image not present or could not be loaded.
    Jan 26 12:20:45 further kernel: registered taskstats version 1
    Jan 26 12:20:45 further kernel: rtc_cmos 00:04: setting system clock to 2013-01-26 12:20:39 UTC (1359202839)
    Jan 26 12:20:45 further kernel: Freeing unused kernel memory: 808k freed
    Jan 26 12:20:45 further kernel: Write protecting the kernel read-only data: 8192k
    Jan 26 12:20:45 further kernel: Freeing unused kernel memory: 1300k freed
    Jan 26 12:20:45 further kernel: Freeing unused kernel memory: 492k freed
    Jan 26 12:20:45 further kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jan 26 12:20:45 further systemd-udevd[46]: starting version 197
    Jan 26 12:20:45 further kernel: ACPI: bus type usb registered
    Jan 26 12:20:45 further kernel: usbcore: registered new interface driver usbfs
    Jan 26 12:20:45 further kernel: usbcore: registered new interface driver hub
    Jan 26 12:20:45 further kernel: SCSI subsystem initialized
    Jan 26 12:20:45 further kernel: usbcore: registered new device driver usb
    Jan 26 12:20:45 further kernel: sdhci: Secure Digital Host Controller Interface driver
    Jan 26 12:20:45 further kernel: sdhci: Copyright(c) Pierre Ossman
    Jan 26 12:20:45 further kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 26 12:20:45 further kernel: ehci_hcd 0000:00:12.2: EHCI Host Controller
    Jan 26 12:20:45 further kernel: ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    Jan 26 12:20:45 further kernel: QUIRK: Enable AMD PLL fix
    Jan 26 12:20:45 further kernel: ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 26 12:20:45 further kernel: ehci_hcd 0000:00:12.2: debug port 1
    Jan 26 12:20:45 further kernel: ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4b000
    Jan 26 12:20:45 further kernel: ACPI: bus type scsi registered
    Jan 26 12:20:45 further kernel: libata version 3.00 loaded.
    Jan 26 12:20:45 further kernel: ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    Jan 26 12:20:45 further kernel: hub 1-0:1.0: USB hub found
    Jan 26 12:20:45 further kernel: hub 1-0:1.0: 5 ports detected
    Jan 26 12:20:45 further kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan 26 12:20:45 further kernel: ohci_hcd 0000:00:12.0: OHCI Host Controller
    Jan 26 12:20:45 further kernel: ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
    Jan 26 12:20:45 further kernel: ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4c000
    Jan 26 12:20:45 further kernel: hub 2-0:1.0: USB hub found
    Jan 26 12:20:45 further kernel: hub 2-0:1.0: 5 ports detected
    Jan 26 12:20:45 further kernel: xhci_hcd 0000:00:10.0: xHCI Host Controller
    Jan 26 12:20:45 further kernel: xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
    Jan 26 12:20:45 further kernel: xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb48000
    Jan 26 12:20:45 further kernel: xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
    Jan 26 12:20:45 further kernel: xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
    Jan 26 12:20:45 further kernel: xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
    Jan 26 12:20:45 further kernel: xHCI xhci_add_endpoint called for root hub
    Jan 26 12:20:45 further kernel: xHCI xhci_check_bandwidth called for root hub
    Jan 26 12:20:45 further kernel: hub 3-0:1.0: USB hub found
    Jan 26 12:20:45 further kernel: hub 3-0:1.0: 2 ports detected
    Jan 26 12:20:45 further kernel: xhci_hcd 0000:00:10.0: xHCI Host Controller
    Jan 26 12:20:45 further kernel: xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
    Jan 26 12:20:45 further kernel: xHCI xhci_add_endpoint called for root hub
    Jan 26 12:20:45 further kernel: xHCI xhci_check_bandwidth called for root hub
    Jan 26 12:20:45 further kernel: hub 4-0:1.0: USB hub found
    Jan 26 12:20:45 further kernel: hub 4-0:1.0: 2 ports detected
    Jan 26 12:20:45 further kernel: sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
    Jan 26 12:20:45 further kernel: Registered led device: mmc0::
    Jan 26 12:20:45 further kernel: mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
    Jan 26 12:20:45 further kernel: ahci 0000:00:11.0: version 3.0
    Jan 26 12:20:45 further kernel: ahci 0000:00:11.0: irq 43 for MSI/MSI-X
    Jan 26 12:20:45 further kernel: ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    Jan 26 12:20:45 further kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    Jan 26 12:20:45 further kernel: scsi0 : ahci
    Jan 26 12:20:45 further kernel: scsi1 : ahci
    Jan 26 12:20:45 further kernel: scsi2 : ahci
    Jan 26 12:20:45 further kernel: ata1: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d100 irq 43
    Jan 26 12:20:45 further kernel: ata2: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d180 irq 43
    Jan 26 12:20:45 further kernel: ata3: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d200 irq 43
    Jan 26 12:20:45 further kernel: usb 1-3: new high-speed USB device number 2 using ehci_hcd
    Jan 26 12:20:45 further kernel: ata3: SATA link down (SStatus 0 SControl 300)
    Jan 26 12:20:45 further kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jan 26 12:20:45 further kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan 26 12:20:45 further kernel: ata2.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
    Jan 26 12:20:45 further kernel: ata1.00: ATA-8: WDC WD5000BPVT-80HXZT3, 01.01A01, max UDMA/133
    Jan 26 12:20:45 further kernel: ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    Jan 26 12:20:45 further kernel: ata1.00: failed to get Identify Device Data, Emask 0x1
    Jan 26 12:20:45 further kernel: ata2.00: configured for UDMA/100
    Jan 26 12:20:45 further kernel: ata1.00: failed to get Identify Device Data, Emask 0x1
    Jan 26 12:20:45 further kernel: ata1.00: configured for UDMA/133
    Jan 26 12:20:45 further kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-8 01.0 PQ: 0 ANSI: 5
    Jan 26 12:20:45 further kernel: scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B0 1.00 PQ: 0 ANSI: 5
    Jan 26 12:20:45 further kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    Jan 26 12:20:45 further kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
    Jan 26 12:20:45 further kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan 26 12:20:45 further kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 26 12:20:45 further kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 26 12:20:45 further kernel: sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
    Jan 26 12:20:45 further kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 26 12:20:45 further kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Jan 26 12:20:45 further kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jan 26 12:20:45 further kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jan 26 12:20:45 further kernel: usb 1-5: new high-speed USB device number 4 using ehci_hcd
    Jan 26 12:20:45 further kernel: tsc: Refined TSC clocksource calibration: 1896.550 MHz
    Jan 26 12:20:45 further kernel: Switching to clocksource tsc
    Jan 26 12:20:45 further kernel: Initializing USB Mass Storage driver...
    Jan 26 12:20:45 further kernel: usbcore: registered new interface driver usb-storage
    Jan 26 12:20:45 further kernel: USB Mass Storage support registered.
    Jan 26 12:20:45 further kernel: usb 2-4: new full-speed USB device number 2 using ohci_hcd
    Jan 26 12:20:45 further kernel: EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    Jan 26 12:20:45 further systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
    Jan 26 12:20:45 further systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    Jan 26 12:20:45 further systemd[1]: Set hostname to <further>.
    Jan 26 12:20:45 further systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    Jan 26 12:20:45 further systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    Jan 26 12:20:45 further systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    Jan 26 12:20:45 further systemd[1]: Starting Remote File Systems.
    Jan 26 12:20:45 further systemd[1]: Reached target Remote File Systems.
    Jan 26 12:20:45 further systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    Jan 26 12:20:45 further systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    Jan 26 12:20:45 further systemd[1]: Starting Delayed Shutdown Socket.
    Jan 26 12:20:45 further systemd[1]: Listening on Delayed Shutdown Socket.
    Jan 26 12:20:45 further systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Jan 26 12:20:45 further systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Jan 26 12:20:45 further systemd[1]: Starting udev Kernel Socket.
    Jan 26 12:20:45 further systemd[1]: Listening on udev Kernel Socket.
    Jan 26 12:20:45 further systemd[1]: Starting udev Control Socket.
    Jan 26 12:20:45 further systemd[1]: Listening on udev Control Socket.
    Jan 26 12:20:45 further systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Jan 26 12:20:45 further systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Jan 26 12:20:45 further systemd[1]: Starting Encrypted Volumes.
    Jan 26 12:20:45 further systemd[1]: Reached target Encrypted Volumes.
    Jan 26 12:20:45 further systemd[1]: Expecting device dev-disk-by\x2duuid-f71c0eee\x2da4ec\x2d43a0\x2d89c7\x2d51f13a79169a.device...
    Jan 26 12:20:45 further systemd[1]: Expecting device dev-disk-by\x2duuid-26f87130\x2d99b7\x2d4a00\x2d997c\x2de177c335f448.device...
    Jan 26 12:20:45 further systemd[1]: Expecting device dev-disk-by\x2duuid-6c6af8e9\x2dbd25\x2d463b\x2dae87\x2dc894d7b092b5.device...
    Jan 26 12:20:45 further systemd[1]: Starting Journal Socket.
    Jan 26 12:20:45 further systemd[1]: Listening on Journal Socket.
    Jan 26 12:20:45 further systemd[1]: Started File System Check on Root Device.
    Jan 26 12:20:45 further systemd[1]: Starting Remount Root and Kernel File Systems...
    Jan 26 12:20:45 further systemd[1]: Starting Load Kernel Modules...
    Jan 26 12:20:45 further systemd[1]: Mounting Huge Pages File System...
    Jan 26 12:20:45 further systemd[1]: Starting udev Coldplug all Devices...
    Jan 26 12:20:45 further systemd[1]: Started Set Up Additional Binary Formats.
    Jan 26 12:20:45 further systemd[1]: Starting Setup Virtual Console...
    Jan 26 12:20:45 further systemd[1]: Mounting POSIX Message Queue File System...
    Jan 26 12:20:45 further systemd[1]: Starting udev Kernel Device Manager...
    Jan 26 12:20:45 further systemd[1]: Starting Apply Kernel Variables...
    Jan 26 12:20:45 further systemd[1]: Mounting Debug File System...
    Jan 26 12:20:45 further systemd[1]: Starting Journal Service...
    Jan 26 12:20:45 further systemd[1]: Started Journal Service.
    Jan 26 12:20:45 further systemd-udevd[142]: starting version 197
    Jan 26 12:20:45 further systemd-journal[145]: Journal started
    Jan 26 12:20:45 further systemd[1]: Started Apply Kernel Variables.
    Jan 26 12:20:45 further systemd[1]: Mounted Debug File System.
    Jan 26 12:20:45 further systemd[1]: Mounted Huge Pages File System.
    Jan 26 12:20:45 further systemd[1]: Started udev Coldplug all Devices.
    Jan 26 12:20:45 further systemd[1]: Mounted POSIX Message Queue File System.
    Jan 26 12:20:45 further systemd[1]: Started udev Kernel Device Manager.
    Jan 26 12:20:45 further kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
    Jan 26 12:20:45 further kernel: ACPI: Power Button [PWRB]
    Jan 26 12:20:45 further kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
    Jan 26 12:20:45 further kernel: ACPI: Sleep Button [SLPB]
    Jan 26 12:20:45 further kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    Jan 26 12:20:45 further kernel: ACPI: Lid Switch [LID]
    Jan 26 12:20:45 further kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    Jan 26 12:20:45 further kernel: ACPI: Power Button [PWRF]
    Jan 26 12:20:45 further kernel: AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    Jan 26 12:20:45 further kernel: AMD IOMMUv2 functionality not available on this system
    Jan 26 12:20:45 further kernel: EXT4-fs (sda6): re-mounted. Opts: barrier=0
    Jan 26 12:20:45 further systemd[1]: Started Remount Root and Kernel File Systems.
    Jan 26 12:20:45 further systemd[1]: Starting Local File Systems (Pre).
    Jan 26 12:20:45 further systemd[1]: Reached target Local File Systems (Pre).
    Jan 26 12:20:45 further systemd[1]: Mounting /tmp...
    Jan 26 12:20:45 further systemd[1]: Starting Load Random Seed...
    Jan 26 12:20:45 further systemd[1]: Mounted /tmp.
    Jan 26 12:20:45 further kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    Jan 26 12:20:45 further kernel: Disabling lock debugging due to kernel taint
    Jan 26 12:20:45 further systemd-modules-load[136]: Inserted module 'fglrx'
    Jan 26 12:20:45 further kernel: <6>[fglrx] Maximum main memory to use for locked dma buffers: 3278 MBytes.
    Jan 26 12:20:45 further kernel: <6>[fglrx] vendor: 1002 device: 9648 count: 1
    Jan 26 12:20:45 further kernel: <6>[fglrx] vendor: 1002 device: 6741 count: 2
    Jan 26 12:20:45 further kernel: <6>[fglrx] ioport: bar 1, base 0xf000, size: 0x100
    Jan 26 12:20:45 further kernel: <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
    Jan 26 12:20:45 further kernel: pci 0000:01:00.0: enabling device (0000 -> 0003)
    Jan 26 12:20:45 further kernel: <6>[fglrx] Kernel PAT support is enabled
    Jan 26 12:20:45 further kernel: <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 2 minors
    Jan 26 12:20:45 further systemd[1]: Started Load Kernel Modules.
    Jan 26 12:20:45 further systemd[1]: Mounted FUSE Control File System.
    Jan 26 12:20:45 further systemd[1]: Mounted Configuration File System.
    Jan 26 12:20:45 further systemd[1]: Started Load Random Seed.
    Jan 26 12:20:45 further

    During boot there is a problem with your fglrx driver. It tries to use MSI interrupts instead of old pin-based method, but it is allready enabled and it warns you http://lxr.linux.no/linux+v3.7.4/drivers/pci/msi.c#L811 in line 828
    And during shutdown there is a problem with pci_msi_shutdown. Maybe this problems related with each other?
    try to disable globaly msi by adding nomsi to kernel options. If this help try to disable msi just for catalyst after boot by echo 0 in /sys/bus/pci/devices/[faulty device]/msi_bus
    try to raise debug level to see message dev_dbg(dev, "shutdown\n"); here http://lxr.linux.no/linux+v3.7.4/drivers/base/core.c#L , open an entry in bugzilla
    try do upgrade or downgrade catalyst if possible
    switch to open source driver

  • Kernel Panic - not syncing: Attempted to kill init!

    OK, a new issue that I can't resolve...
    Having made my new kernel without any hiccups, I then installed it by using pacman -A kernel2.6.12.pkg.tar.gz. However, on boot-up it only gets so far, then gives me an error:
    <0>Kernel Panic - not syncing: Attempted to kill init!
    I've looked around on the 'net, and it seems this usually occurs when there's some problem with the hardware. However, I've used the config file from the 2.6.10 kernel I'm currently in as I type, so there shouldn't be any problems support-wise :?
    What could be wrong?
    My fstab and config for the 2.6.12 kernel are below (I've included the fstab so you can see I've got support for my filesystems compiled into the kernel):
    FSTAB:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /dev/pts devpts defaults 0 0
    none /dev/shm tmpfs defaults 0 0
    tmpfs /tmp tmpfs defaults 0 0
    usbfs /proc/bus/usb usbfs defaults 0 0
    /dev/cdroms/cdrom0 /mnt/cd iso9660 ro,user,noauto,unhide 0 0
    /dev/cdroms/cdrom0 /mnt/dvd udf ro,user,noauto,unhide 0 0
    /dev/floppy/0 /mnt/fl vfat user,noauto 0 0
    /dev/discs/disc0/part2 swap swap defaults 0 0
    /dev/discs/disc0/part3 / reiserfs defaults 0 0
    /dev/discs/disc0/part1 /boot reiserfs defaults 0 0
    /dev/discs/disc0/part4 /home reiserfs defaults 0 0
    /dev/sda3 /mnt/warehouse vfat defaults 0 0
    CONFIG:
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.10
    # Sun Sep 4 11:39:06 2005
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    # Code maturity level options
    CONFIG_EXPERIMENTAL=y
    CONFIG_CLEAN_COMPILE=y
    CONFIG_BROKEN_ON_SMP=y
    CONFIG_LOCK_KERNEL=y
    # General setup
    CONFIG_LOCALVERSION="-ARCH"
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_POSIX_MQUEUE=y
    # CONFIG_BSD_PROCESS_ACCT is not set
    CONFIG_SYSCTL=y
    # CONFIG_AUDIT is not set
    CONFIG_LOG_BUF_SHIFT=14
    CONFIG_HOTPLUG=y
    CONFIG_KOBJECT_UEVENT=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SHMEM=y
    CONFIG_CC_ALIGN_FUNCTIONS=0
    CONFIG_CC_ALIGN_LABELS=0
    CONFIG_CC_ALIGN_LOOPS=0
    CONFIG_CC_ALIGN_JUMPS=0
    # CONFIG_TINY_SHMEM is not set
    # Loadable module support
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    # CONFIG_MODULE_FORCE_UNLOAD is not set
    CONFIG_OBSOLETE_MODPARM=y
    # CONFIG_MODVERSIONS is not set
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_KMOD=y
    # Processor type and features
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    # CONFIG_MPENTIUM4 is not set
    # CONFIG_MK6 is not set
    CONFIG_MK7=y
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_USE_3DNOW=y
    CONFIG_HPET_TIMER=y
    # CONFIG_SMP is not set
    CONFIG_PREEMPT=y
    # CONFIG_X86_UP_APIC is not set
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    # CONFIG_X86_MCE_NONFATAL is not set
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    # CONFIG_MICROCODE is not set
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set
    # Firmware Drivers
    # CONFIG_EDD is not set
    # CONFIG_NOHIGHMEM is not set
    CONFIG_HIGHMEM4G=y
    # CONFIG_HIGHMEM64G is not set
    CONFIG_HIGHMEM=y
    # CONFIG_HIGHPTE is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_HAVE_DEC_LOCK=y
    # CONFIG_REGPARM is not set
    # Power management options (ACPI, APM)
    CONFIG_PM=y
    # CONFIG_PM_DEBUG is not set
    # CONFIG_SOFTWARE_SUSPEND is not set
    # ACPI (Advanced Configuration and Power Interface) Support
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    # CONFIG_ACPI_SLEEP is not set
    # CONFIG_ACPI_AC is not set
    # CONFIG_ACPI_BATTERY is not set
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_VIDEO=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_IBM is not set
    # CONFIG_ACPI_TOSHIBA is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    # CONFIG_X86_PM_TIMER is not set
    # APM (Advanced Power Management) BIOS Support
    # CONFIG_APM is not set
    # CPU Frequency scaling
    # CONFIG_CPU_FREQ is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    # CONFIG_PCI_LEGACY_PROC is not set
    CONFIG_PCI_NAMES=y
    # CONFIG_ISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set
    # PCCARD (PCMCIA/CardBus) support
    # CONFIG_PCCARD is not set
    # PC-card bridges
    # PCI Hotplug Support
    # CONFIG_HOTPLUG_PCI is not set
    # Executable file formats
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_MISC=y
    # Device Drivers
    # Generic Driver Options
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    # Memory Technology Devices (MTD)
    # CONFIG_MTD is not set
    # Parallel port support
    # CONFIG_PARPORT is not set
    # Plug and Play support
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set
    # Protocols
    CONFIG_PNPACPI=y
    # Block devices
    CONFIG_BLK_DEV_FD=y
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_LOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    # CONFIG_BLK_DEV_RAM is not set
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_INITRAMFS_SOURCE=""
    # CONFIG_LBD is not set
    # CONFIG_CDROM_PKTCDVD is not set
    # IO Schedulers
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    # CONFIG_IOSCHED_DEADLINE is not set
    # CONFIG_IOSCHED_CFQ is not set
    # ATA/ATAPI/MFM/RLL support
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y
    # Please see Documentation/ide.txt for help/info on IDE drives
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    CONFIG_BLK_DEV_IDEFLOPPY=y
    # CONFIG_BLK_DEV_IDESCSI is not set
    # CONFIG_IDE_TASK_IOCTL is not set
    # IDE chipset support/bugfixes
    CONFIG_IDE_GENERIC=y
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=y
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    CONFIG_BLK_DEV_AMD74XX=y
    # CONFIG_BLK_DEV_ATIIXP is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    # CONFIG_BLK_DEV_PIIX is not set
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_IDE_ARM is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_BLK_DEV_HD is not set
    # SCSI device support
    CONFIG_SCSI=y
    CONFIG_SCSI_PROC_FS=y
    # SCSI support type (disk, tape, CD-ROM)
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    # CONFIG_BLK_DEV_SR is not set
    # CONFIG_CHR_DEV_SG is not set
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set
    # SCSI Transport Attributes
    # CONFIG_SCSI_SPI_ATTRS is not set
    # CONFIG_SCSI_FC_ATTRS is not set
    # SCSI low-level drivers
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_DPT_I2O is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    CONFIG_SCSI_SATA=y
    # CONFIG_SCSI_SATA_AHCI is not set
    # CONFIG_SCSI_SATA_SVW is not set
    # CONFIG_SCSI_ATA_PIIX is not set
    CONFIG_SCSI_SATA_NV=y
    # CONFIG_SCSI_SATA_PROMISE is not set
    # CONFIG_SCSI_SATA_SX4 is not set
    CONFIG_SCSI_SATA_SIL=y
    # CONFIG_SCSI_SATA_SIS is not set
    # CONFIG_SCSI_SATA_ULI is not set
    # CONFIG_SCSI_SATA_VIA is not set
    # CONFIG_SCSI_SATA_VITESSE is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    CONFIG_SCSI_QLA2XXX=y
    # CONFIG_SCSI_QLA21XX is not set
    # CONFIG_SCSI_QLA22XX is not set
    # CONFIG_SCSI_QLA2300 is not set
    # CONFIG_SCSI_QLA2322 is not set
    # CONFIG_SCSI_QLA6312 is not set
    # CONFIG_SCSI_QLA6322 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set
    # Multi-device support (RAID and LVM)
    # CONFIG_MD is not set
    # Fusion MPT device support
    # CONFIG_FUSION is not set
    # IEEE 1394 (FireWire) support
    # CONFIG_IEEE1394 is not set
    # I2O device support
    # CONFIG_I2O is not set
    # Networking support
    CONFIG_NET=y
    # Networking options
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    # CONFIG_NETLINK_DEV is not set
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_IP_MROUTE is not set
    # CONFIG_ARPD is not set
    CONFIG_SYN_COOKIES=y
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    # CONFIG_INET_TUNNEL is not set
    CONFIG_IP_TCPDIAG=y
    # CONFIG_IP_TCPDIAG_IPV6 is not set
    # IP: Virtual Server Configuration
    CONFIG_IP_VS=m
    # CONFIG_IP_VS_DEBUG is not set
    CONFIG_IP_VS_TAB_BITS=12
    # IPVS transport protocol load balancing support
    CONFIG_IP_VS_PROTO_TCP=y
    CONFIG_IP_VS_PROTO_UDP=y
    CONFIG_IP_VS_PROTO_ESP=y
    CONFIG_IP_VS_PROTO_AH=y
    # IPVS scheduler
    CONFIG_IP_VS_RR=m
    CONFIG_IP_VS_WRR=m
    CONFIG_IP_VS_LC=m
    CONFIG_IP_VS_WLC=m
    CONFIG_IP_VS_LBLC=m
    CONFIG_IP_VS_LBLCR=m
    CONFIG_IP_VS_DH=m
    CONFIG_IP_VS_SH=m
    CONFIG_IP_VS_SED=m
    CONFIG_IP_VS_NQ=m
    # IPVS application helper
    CONFIG_IP_VS_FTP=m
    # CONFIG_IPV6 is not set
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set
    # IP: Netfilter Configuration
    CONFIG_IP_NF_CONNTRACK=m
    # CONFIG_IP_NF_CT_ACCT is not set
    # CONFIG_IP_NF_CONNTRACK_MARK is not set
    # CONFIG_IP_NF_CT_PROTO_SCTP is not set
    CONFIG_IP_NF_FTP=m
    CONFIG_IP_NF_IRC=m
    CONFIG_IP_NF_TFTP=m
    CONFIG_IP_NF_AMANDA=m
    CONFIG_IP_NF_QUEUE=m
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_LIMIT=m
    CONFIG_IP_NF_MATCH_IPRANGE=m
    CONFIG_IP_NF_MATCH_MAC=m
    CONFIG_IP_NF_MATCH_PKTTYPE=m
    CONFIG_IP_NF_MATCH_MARK=m
    CONFIG_IP_NF_MATCH_MULTIPORT=m
    CONFIG_IP_NF_MATCH_TOS=m
    CONFIG_IP_NF_MATCH_RECENT=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_DSCP=m
    CONFIG_IP_NF_MATCH_AH_ESP=m
    CONFIG_IP_NF_MATCH_LENGTH=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_MATCH_TCPMSS=m
    CONFIG_IP_NF_MATCH_HELPER=m
    CONFIG_IP_NF_MATCH_STATE=m
    CONFIG_IP_NF_MATCH_CONNTRACK=m
    CONFIG_IP_NF_MATCH_OWNER=m
    CONFIG_IP_NF_MATCH_ADDRTYPE=m
    CONFIG_IP_NF_MATCH_REALM=m
    CONFIG_IP_NF_MATCH_SCTP=m
    CONFIG_IP_NF_MATCH_COMMENT=m
    # CONFIG_IP_NF_MATCH_HASHLIMIT is not set
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_TARGET_LOG=m
    CONFIG_IP_NF_TARGET_ULOG=m
    CONFIG_IP_NF_TARGET_TCPMSS=m
    CONFIG_IP_NF_NAT=m
    CONFIG_IP_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    CONFIG_IP_NF_TARGET_NETMAP=m
    CONFIG_IP_NF_TARGET_SAME=m
    CONFIG_IP_NF_NAT_LOCAL=y
    CONFIG_IP_NF_NAT_SNMP_BASIC=m
    CONFIG_IP_NF_NAT_IRC=m
    CONFIG_IP_NF_NAT_FTP=m
    CONFIG_IP_NF_NAT_TFTP=m
    CONFIG_IP_NF_NAT_AMANDA=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_TOS=m
    CONFIG_IP_NF_TARGET_ECN=m
    CONFIG_IP_NF_TARGET_DSCP=m
    CONFIG_IP_NF_TARGET_MARK=m
    CONFIG_IP_NF_TARGET_CLASSIFY=m
    CONFIG_IP_NF_RAW=m
    CONFIG_IP_NF_TARGET_NOTRACK=m
    CONFIG_IP_NF_ARPTABLES=m
    CONFIG_IP_NF_ARPFILTER=m
    CONFIG_IP_NF_ARP_MANGLE=m
    # CONFIG_IP_NF_COMPAT_IPCHAINS is not set
    # CONFIG_IP_NF_COMPAT_IPFWADM is not set
    # SCTP Configuration (EXPERIMENTAL)
    CONFIG_IP_SCTP=m
    # CONFIG_SCTP_DBG_MSG is not set
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_HMAC_NONE is not set
    CONFIG_SCTP_HMAC_SHA1=y
    # CONFIG_SCTP_HMAC_MD5 is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # QoS and/or fair queueing
    # CONFIG_NET_SCHED is not set
    # CONFIG_NET_SCH_CLK_JIFFIES is not set
    # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
    # CONFIG_NET_SCH_CLK_CPU is not set
    CONFIG_NET_CLS_ROUTE=y
    # Network testing
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    CONFIG_NETDEVICES=y
    # CONFIG_DUMMY is not set
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_NET_SB1000 is not set
    # ARCnet devices
    # CONFIG_ARCNET is not set
    # Ethernet (10 or 100Mbit)
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=m
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    CONFIG_NET_VENDOR_3COM=y
    CONFIG_VORTEX=y
    # CONFIG_TYPHOON is not set
    # Tulip family network device support
    # CONFIG_NET_TULIP is not set
    # CONFIG_HP100 is not set
    # CONFIG_NET_PCI is not set
    # Ethernet (1000 Mbit)
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_TIGON3 is not set
    # Ethernet (10000 Mbit)
    # CONFIG_IXGB is not set
    # CONFIG_S2IO is not set
    # Token Ring devices
    # CONFIG_TR is not set
    # Wireless LAN (non-hamradio)
    # CONFIG_NET_RADIO is not set
    # Wan interfaces
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set
    # ISDN subsystem
    # CONFIG_ISDN is not set
    # Telephony Support
    # CONFIG_PHONE is not set
    # Input device support
    CONFIG_INPUT=y
    # Userland interfaces
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set
    # Input I/O drivers
    # CONFIG_GAMEPORT is not set
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PCIPS2 is not set
    # CONFIG_SERIO_RAW is not set
    # Input Device Drivers
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set
    # Character devices
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set
    # Serial drivers
    CONFIG_SERIAL_8250=y
    # CONFIG_SERIAL_8250_CONSOLE is not set
    # CONFIG_SERIAL_8250_ACPI is not set
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set
    # Non-8250 serial port support
    CONFIG_SERIAL_CORE=y
    CONFIG_UNIX98_PTYS=y
    # CONFIG_LEGACY_PTYS is not set
    # IPMI
    # CONFIG_IPMI_HANDLER is not set
    # Watchdog Cards
    # CONFIG_WATCHDOG is not set
    # CONFIG_HW_RANDOM is not set
    # CONFIG_NVRAM is not set
    # CONFIG_RTC is not set
    # CONFIG_GEN_RTC is not set
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set
    # Ftape, the floppy tape device driver
    # CONFIG_FTAPE is not set
    CONFIG_AGP=y
    # CONFIG_AGP_ALI is not set
    # CONFIG_AGP_ATI is not set
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    # CONFIG_AGP_INTEL is not set
    # CONFIG_AGP_INTEL_MCH is not set
    CONFIG_AGP_NVIDIA=y
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_EFFICEON is not set
    CONFIG_DRM=y
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_R128 is not set
    CONFIG_DRM_RADEON=y
    # CONFIG_DRM_I830 is not set
    # CONFIG_DRM_I915 is not set
    # CONFIG_DRM_MGA is not set
    # CONFIG_DRM_SIS is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HPET is not set
    # CONFIG_HANGCHECK_TIMER is not set
    # I2C support
    CONFIG_I2C=y
    # CONFIG_I2C_CHARDEV is not set
    # I2C Algorithms
    CONFIG_I2C_ALGOBIT=y
    # CONFIG_I2C_ALGOPCF is not set
    # CONFIG_I2C_ALGOPCA is not set
    # I2C Hardware Bus support
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI1563 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    # CONFIG_I2C_AMD8111 is not set
    # CONFIG_I2C_I801 is not set
    # CONFIG_I2C_I810 is not set
    CONFIG_I2C_ISA=y
    CONFIG_I2C_NFORCE2=y
    # CONFIG_I2C_PARPORT_LIGHT is not set
    # CONFIG_I2C_PIIX4 is not set
    # CONFIG_I2C_PROSAVAGE is not set
    # CONFIG_I2C_SAVAGE4 is not set
    # CONFIG_SCx200_ACB is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    # CONFIG_I2C_STUB is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set
    # CONFIG_I2C_VOODOO3 is not set
    # CONFIG_I2C_PCA_ISA is not set
    # Hardware Sensors Chip support
    # CONFIG_I2C_SENSOR is not set
    # CONFIG_SENSORS_ADM1021 is not set
    # CONFIG_SENSORS_ADM1025 is not set
    # CONFIG_SENSORS_ADM1026 is not set
    # CONFIG_SENSORS_ADM1031 is not set
    # CONFIG_SENSORS_ASB100 is not set
    # CONFIG_SENSORS_DS1621 is not set
    # CONFIG_SENSORS_FSCHER is not set
    # CONFIG_SENSORS_GL518SM is not set
    # CONFIG_SENSORS_IT87 is not set
    # CONFIG_SENSORS_LM63 is not set
    # CONFIG_SENSORS_LM75 is not set
    # CONFIG_SENSORS_LM77 is not set
    # CONFIG_SENSORS_LM78 is not set
    # CONFIG_SENSORS_LM80 is not set
    # CONFIG_SENSORS_LM83 is not set
    # CONFIG_SENSORS_LM85 is not set
    # CONFIG_SENSORS_LM87 is not set
    # CONFIG_SENSORS_LM90 is not set
    # CONFIG_SENSORS_MAX1619 is not set
    # CONFIG_SENSORS_PC87360 is not set
    # CONFIG_SENSORS_SMSC47M1 is not set
    # CONFIG_SENSORS_VIA686A is not set
    # CONFIG_SENSORS_W83781D is not set
    # CONFIG_SENSORS_W83L785TS is not set
    # CONFIG_SENSORS_W83627HF is not set
    # Other I2C Chip support
    # CONFIG_SENSORS_EEPROM is not set
    # CONFIG_SENSORS_PCF8574 is not set
    # CONFIG_SENSORS_PCF8591 is not set
    # CONFIG_SENSORS_RTC8564 is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set
    # Dallas's 1-wire bus
    # CONFIG_W1 is not set
    # Misc devices
    # CONFIG_IBM_ASM is not set
    # Multimedia devices
    CONFIG_VIDEO_DEV=m
    # Video For Linux
    # Video Adapters
    # CONFIG_VIDEO_BT848 is not set
    # CONFIG_VIDEO_CPIA is not set
    # CONFIG_VIDEO_SAA5246A is not set
    # CONFIG_VIDEO_SAA5249 is not set
    # CONFIG_TUNER_3036 is not set
    # CONFIG_VIDEO_STRADIS is not set
    # CONFIG_VIDEO_ZORAN is not set
    # CONFIG_VIDEO_SAA7134 is not set
    # CONFIG_VIDEO_MXB is not set
    # CONFIG_VIDEO_DPC is not set
    # CONFIG_VIDEO_HEXIUM_ORION is not set
    # CONFIG_VIDEO_HEXIUM_GEMINI is not set
    # CONFIG_VIDEO_CX88 is not set
    # CONFIG_VIDEO_OVCAMCHIP is not set
    # Radio Adapters
    # CONFIG_RADIO_GEMTEK_PCI is not set
    # CONFIG_RADIO_MAXIRADIO is not set
    # CONFIG_RADIO_MAESTRO is not set
    # Digital Video Broadcasting Devices
    # CONFIG_DVB is not set
    # Graphics support
    # CONFIG_FB is not set
    # CONFIG_VIDEO_SELECT is not set
    # Console display driver support
    CONFIG_VGA_CONSOLE=y
    CONFIG_DUMMY_CONSOLE=y
    # Sound
    CONFIG_SOUND=y
    # Advanced Linux Sound Architecture
    CONFIG_SND=y
    CONFIG_SND_TIMER=y
    CONFIG_SND_PCM=y
    CONFIG_SND_HWDEP=y
    CONFIG_SND_RAWMIDI=y
    CONFIG_SND_SEQUENCER=y
    # CONFIG_SND_SEQ_DUMMY is not set
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=y
    CONFIG_SND_PCM_OSS=y
    CONFIG_SND_SEQUENCER_OSS=y
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set
    # Generic devices
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_VIRMIDI is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set
    # PCI devices
    CONFIG_SND_AC97_CODEC=y
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS4281 is not set
    CONFIG_SND_EMU10K1=y
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    CONFIG_SND_INTEL8X0=y
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VX222 is not set
    # USB devices
    # CONFIG_SND_USB_AUDIO is not set
    # CONFIG_SND_USB_USX2Y is not set
    # Open Sound System
    # CONFIG_SOUND_PRIME is not set
    # USB support
    CONFIG_USB=y
    # CONFIG_USB_DEBUG is not set
    # Miscellaneous USB options
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_BANDWIDTH is not set
    # CONFIG_USB_DYNAMIC_MINORS is not set
    # CONFIG_USB_SUSPEND is not set
    # CONFIG_USB_OTG is not set
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    # USB Host Controller Drivers
    CONFIG_USB_EHCI_HCD=y
    # CONFIG_USB_EHCI_SPLIT_ISO is not set
    # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
    CONFIG_USB_OHCI_HCD=y
    # CONFIG_USB_UHCI_HCD is not set
    # CONFIG_USB_SL811_HCD is not set
    # USB Device Class drivers
    # CONFIG_USB_AUDIO is not set
    # CONFIG_USB_BLUETOOTH_TTY is not set
    # CONFIG_USB_MIDI is not set
    # CONFIG_USB_ACM is not set
    CONFIG_USB_PRINTER=y
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
    CONFIG_USB_STORAGE=y
    # CONFIG_USB_STORAGE_DEBUG is not set
    CONFIG_USB_STORAGE_RW_DETECT=y
    # CONFIG_USB_STORAGE_DATAFAB is not set
    # CONFIG_USB_STORAGE_FREECOM is not set
    # CONFIG_USB_STORAGE_ISD200 is not set
    # CONFIG_USB_STORAGE_DPCM is not set
    # CONFIG_USB_STORAGE_HP8200e is not set
    # CONFIG_USB_STORAGE_SDDR09 is not set
    # CONFIG_USB_STORAGE_SDDR55 is not set
    # CONFIG_USB_STORAGE_JUMPSHOT is not set
    # USB Input Devices
    CONFIG_USB_HID=y
    CONFIG_USB_HIDINPUT=y
    # CONFIG_HID_FF is not set
    CONFIG_USB_HIDDEV=y
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_MTOUCH is not set
    # CONFIG_USB_EGALAX is not set
    # CONFIG_USB_XPAD is not set
    # CONFIG_USB_ATI_REMOTE is not set
    # USB Imaging devices
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set
    # CONFIG_USB_HPUSBSCSI is not set
    # USB Multimedia devices
    # CONFIG_USB_DABUSB is not set
    # CONFIG_USB_VICAM is not set
    # CONFIG_USB_DSBR is not set
    # CONFIG_USB_IBMCAM is not set
    # CONFIG_USB_KONICAWC is not set
    # CONFIG_USB_OV511 is not set
    # CONFIG_USB_SE401 is not set
    # CONFIG_USB_SN9C102 is not set
    # CONFIG_USB_STV680 is not set
    # USB Network Adapters
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET is not set
    # USB port drivers
    # USB Serial Converter support
    # CONFIG_USB_SERIAL is not set
    # USB Miscellaneous drivers
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_TIGL is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGETKIT is not set
    # CONFIG_USB_PHIDGETSERVO is not set
    # CONFIG_USB_TEST is not set
    # USB ATM/DSL drivers
    # USB Gadget Support
    # CONFIG_USB_GADGET is not set
    # CONFIG_USB_GADGET_NET2280 is not set
    # CONFIG_USB_GADGET_PXA2XX is not set
    # CONFIG_USB_GADGET_GOKU is not set
    # CONFIG_USB_GADGET_SA1100 is not set
    # CONFIG_USB_GADGET_LH7A40X is not set
    # CONFIG_USB_GADGET_DUMMY_HCD is not set
    # CONFIG_USB_GADGET_OMAP is not set
    # CONFIG_USB_ZERO is not set
    # CONFIG_USB_ETH is not set
    # CONFIG_USB_GADGETFS is not set
    # CONFIG_USB_FILE_STORAGE is not set
    # CONFIG_USB_G_SERIAL is not set
    # MMC/SD Card support
    # CONFIG_MMC is not set
    # File systems
    CONFIG_EXT2_FS=y
    # CONFIG_EXT2_FS_XATTR is not set
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    # CONFIG_EXT3_FS_POSIX_ACL is not set
    # CONFIG_EXT3_FS_SECURITY is not set
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    CONFIG_REISERFS_FS=y
    # CONFIG_REISERFS_CHECK is not set
    # CONFIG_REISERFS_PROC_INFO is not set
    # CONFIG_REISERFS_FS_XATTR is not set
    # CONFIG_JFS_FS is not set
    # CONFIG_XFS_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    # CONFIG_AUTOFS_FS is not set
    CONFIG_AUTOFS4_FS=y
    # CD-ROM/DVD Filesystems
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    # CONFIG_ZISOFS is not set
    CONFIG_UDF_FS=y
    CONFIG_UDF_NLS=y
    # DOS/FAT/NT Filesystems
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=y
    # CONFIG_NTFS_DEBUG is not set
    # CONFIG_NTFS_RW is not set
    # Pseudo filesystems
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_SYSFS=y
    CONFIG_DEVFS_FS=y
    CONFIG_DEVFS_MOUNT=y
    # CONFIG_DEVFS_DEBUG is not set
    # CONFIG_DEVPTS_FS_XATTR is not set
    CONFIG_TMPFS=y
    # CONFIG_TMPFS_XATTR is not set
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y
    # Miscellaneous filesystems
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    CONFIG_HFS_FS=y
    CONFIG_HFSPLUS_FS=y
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set
    # Network File Systems
    # CONFIG_NFS_FS is not set
    # CONFIG_NFSD is not set
    # CONFIG_EXPORTFS is not set
    CONFIG_SMB_FS=y
    # CONFIG_SMB_NLS_DEFAULT is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set
    # Partition Types
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y
    # Native Language Support
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    # CONFIG_NLS_ASCII is not set
    CONFIG_NLS_ISO8859_1=y
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    # CONFIG_NLS_UTF8 is not set
    # Profiling support
    # CONFIG_PROFILING is not set
    # Kernel hacking
    # CONFIG_DEBUG_KERNEL is not set
    # CONFIG_FRAME_POINTER is not set
    CONFIG_EARLY_PRINTK=y
    CONFIG_4KSTACKS=y
    # Security options
    # CONFIG_KEYS is not set
    # CONFIG_SECURITY is not set
    # Cryptographic options
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_HMAC=y
    # CONFIG_CRYPTO_NULL is not set
    # CONFIG_CRYPTO_MD4 is not set
    # CONFIG_CRYPTO_MD5 is not set
    CONFIG_CRYPTO_SHA1=y
    # CONFIG_CRYPTO_SHA256 is not set
    # CONFIG_CRYPTO_SHA512 is not set
    # CONFIG_CRYPTO_WP512 is not set
    # CONFIG_CRYPTO_DES is not set
    # CONFIG_CRYPTO_BLOWFISH is not set
    # CONFIG_CRYPTO_TWOFISH is not set
    # CONFIG_CRYPTO_SERPENT is not set
    # CONFIG_CRYPTO_AES_586 is not set
    # CONFIG_CRYPTO_CAST5 is not set
    # CONFIG_CRYPTO_CAST6 is not set
    # CONFIG_CRYPTO_TEA is not set
    # CONFIG_CRYPTO_ARC4 is not set
    # CONFIG_CRYPTO_KHAZAD is not set
    # CONFIG_CRYPTO_ANUBIS is not set
    # CONFIG_CRYPTO_DEFLATE is not set
    # CONFIG_CRYPTO_MICHAEL_MIC is not set
    # CONFIG_CRYPTO_CRC32C is not set
    # CONFIG_CRYPTO_TEST is not set
    # Library routines
    CONFIG_CRC_CCITT=m
    CONFIG_CRC32=y
    CONFIG_LIBCRC32C=m
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_PC=y
    Arch is running on an Athlon-XP 3000+, with an Audigy 2 Value sound card, ASUS NF7 mobo (nforce2), 2 IDE hdds, 1 SATA hdd, a floppy drive, 3com Boomerang ethernet PCI card, and an ATI Radeon 9800SE.
    I thought that I might have enabled both APM and APCI in the kernel by accident, but that's not the case :cry:
    I know, as I've mentioned earlier in the thread, that there's an issue with the emu10k1 drivers used by my audigy in this kernel, but I've compiled that as a module under ALSA, and I assume it wouldn't have an extreme effect like this even if it were statically compiled.
    Any ideas???

    Problem was resolved by self; I recompiled the kernel, again using ABS... I think I may have not incorporated an I/O Scheduler into the kernel, lol. Cheers anyway.

  • Ever since I updated iTunes my iPods will not sync with my cars

    Ever since I updated iTunes my iPods will not sync with my cars.I have a 30g and 60g 5th gen iPods that I use in my two car. In my cars I have a dealer installed integration module so that I can navigate my I pods play list artist and song titles using the radio itself. Ever since that last iTunes update 7.3.1. I no longer am able to use this feature. I used my sister’s 30g iPod that she did has not updated and the system works fine. Can someone help me with this problem.

    I have had an Alpine head unit in my car with the ipod connection for about a year and it has worked fine until recently. Now I get an error message on the ipod that reads, "The currently attached accessory is not supported by this ipod." I have tried connecting a buddy's ipod to my car stereo, and his still works fine with it. I've done the 5 R's, tried going back to an older version of itunes as Alpine suggested. My next step will be going to the Apple store with an appointment, seeing what they say.

  • Bookmarks not syncing between 2 PCs

    Hi
    I just installed Firefox on a new PC and wish to use it to keep my 2 PCs synchronized.
    Both PCs use the new version of Sync and latest version of Firefox.
    However bookmarks don't sync.
    I had XMarks and desactivated it but it still does not work.
    I activated the log as indicated in a previous similar conversation and got the following log, which indicates some kind of fail which I can't understand what it is exactly. (I had to cut the log to keep my msg within the limi0
    1417351809684 Sync.BrowserIDManager DEBUG _ensureValidToken already has one
    1417351809684 Sync.Collection DEBUG POST Length: 705
    1417351810027 Sync.Status DEBUG Status for engine bookmarks: error.engine.reason.unknown_fail
    1417351810027 Sync.Status DEBUG Status.service: success.status_ok => error.sync.failed_partial
    1417351810027 Sync.ErrorHandler DEBUG bookmarks failed: Error: App. Quitting (resource://services-sync/resource.js:394:18) JS Stack trace: [email protected]:428:12 < SyncEngine.prototype._uploadOutgoing/doUpload<@engines.js:1384:20 < [email protected]:518:42 < [email protected]:1432:9 < [email protected]:1483:7 < [email protected]:214:11 < [email protected]:211:1 < [email protected]:141:21 < [email protected]:655:5 < [email protected]:199:7 < [email protected]:149:15 < [email protected]:1271:7 < [email protected]:141:21 < [email protected]:96:16 < [email protected]:1261:12 < sync/<@service.js:1253:14 < [email protected]:70:16 < [email protected]:1241:5
    1417351810027 Sync.Engine.Forms INFO 0 outgoing items pre-reconciliation
    1417351810028 Sync.Engine.Forms INFO Records: 0 applied, 0 successfully, 0 failed to apply, 0 newly failed to apply, 0 reconciled.
    1417351810029 Sync.Engine.History INFO 1 outgoing items pre-reconciliation
    1417351810030 Sync.Engine.History INFO Records: 0 applied, 0 successfully, 0 failed to apply, 0 newly failed to apply, 0 reconciled.
    1417351810031 Sync.Engine.History WARN Error creating record: [Exception... "App. Quitting" nsresult: "0x80004004 (NS_ERROR_ABORT)" location: "JS frame :: resource://services-common/async.js :: checkAppReady/onQuitApplication/Async.checkAppReady :: line 126" data: no] Stack trace: checkAppReady/onQuitApplication/Async.checkAppReady()@resource://services-common/async.js:126 < waitForSyncCallback()@resource://services-common/async.js:101 < querySpinningly()@resource://services-common/async.js:201 < HistStore__findURLByGUID()@resource://gre/modules/services-sync/engines/history.js:163 < createRecord()@resource://gre/modules/services-sync/engines/history.js:331 < SyncEngine.prototype._createRecord()@resource://services-sync/engines.js:819 < SyncEngine.prototype._uploadOutgoing()@resource://services-sync/engines.js:1412 < SyncEngine.prototype._sync()@resource://services-sync/engines.js:1483 < WrappedNotify()@resource://services-sync/util.js:141 < Engine.prototype.sync()@resource://services-sync/engines.js:655 < _syncEngine()@resource://services-sync/stages/enginesync.js:199 < sync()@resource://services-sync/stages/enginesync.js:149 < onNotify()@resource://gre/modules/services-sync/service.js:1271 < WrappedNotify()@resource://services-sync/util.js:141 < WrappedLock()@resource://services-sync/util.js:96 < _lockedSync()@resource://gre/modules/services-sync/service.js:1261 < sync/<()@resource://gre/modules/services-sync/service.js:1253 < WrappedCatch()@resource://services-sync/util.js:70 < sync()@resource://gre/modules/services-sync/service.js:1241 < <file:unknown>
    1417351810031 Sync.Status DEBUG Status for engine history: error.engine.reason.unknown_fail
    1417351810031 Sync.Status DEBUG Status.service: error.sync.failed_partial => error.sync.failed_partial
    1417351810032 Sync.ErrorHandler DEBUG history failed: [Exception... "App. Quitting" nsresult: "0x80004004 (NS_ERROR_ABORT)" location: "JS frame :: resource://services-common/async.js :: checkAppReady/onQuitApplication/Async.checkAppReady :: line 126" data: no] Stack trace: checkAppReady/onQuitApplication/Async.checkAppReady()@resource://services-common/async.js:126 < waitForSyncCallback()@resource://services-common/async.js:101 < _sleep()@resource://services-sync/engines.js:275 < SyncEngine.prototype._uploadOutgoing()@resource://services-sync/engines.js:1427 < SyncEngine.prototype._sync()@resource://services-sync/engines.js:1483 < WrappedNotify()@resource://services-sync/util.js:141 < Engine.prototype.sync()@resource://services-sync/engines.js:655 < _syncEngine()@resource://services-sync/stages/enginesync.js:199 < sync()@resource://services-sync/stages/enginesync.js:149 < onNotify()@resource://gre/modules/services-sync/service.js:1271 < WrappedNotify()@resource://services-sync/util.js:141 < WrappedLock()@resource://services-sync/util.js:96 < _lockedSync()@resource://gre/modules/services-sync/service.js:1261 < sync/<()@resource://gre/modules/services-sync/service.js:1253 < WrappedCatch()@resource://services-sync/util.js:70 < sync()@resource://gre/modules/services-sync/service.js:1241 < <file:unknown>
    1417351810032 Sync.Engine.Passwords INFO 0 outgoing items pre-reconciliation
    1417351810033 Sync.Engine.Passwords INFO Records: 0 applied, 0 successfully, 0 failed to apply, 0 newly failed to apply, 0 reconciled.
    1417351810033 Sync.Engine.Prefs INFO 0 outgoing items pre-reconciliation
    1417351810034 Sync.Engine.Prefs INFO Records: 0 applied, 0 successfully, 0 failed to apply, 0 newly failed to apply, 0 reconciled.
    1417351810034 Sync.Engine.Tabs INFO 1 outgoing items pre-reconciliation
    1417351810035 Sync.Engine.Tabs INFO Records: 0 applied, 0 successfully, 0 failed to apply, 0 newly failed to apply, 0 reconciled.
    1417351810036 Sync.Status DEBUG Status for engine tabs: error.engine.reason.unknown_fail
    1417351810036 Sync.Status DEBUG Status.service: error.sync.failed_partial => error.sync.failed_partial
    1417351810036 Sync.ErrorHandler DEBUG tabs failed: [Exception... "App. Quitting" nsresult: "0x80004004 (NS_ERROR_ABORT)" location: "JS frame :: resource://services-common/async.js :: checkAppReady/onQuitApplication/Async.checkAppReady :: line 126" data: no] Stack trace: checkAppReady/onQuitApplication/Async.checkAppReady()@resource://services-common/async.js:126 < waitForSyncCallback()@resource://services-common/async.js:101 < _sleep()@resource://services-sync/engines.js:275 < SyncEngine.prototype._uploadOutgoing()@resource://services-sync/engines.js:1427 < SyncEngine.prototype._sync()@resource://services-sync/engines.js:1483 < WrappedNotify()@resource://services-sync/util.js:141 < Engine.prototype.sync()@resource://services-sync/engines.js:655 < _syncEngine()@resource://services-sync/stages/enginesync.js:199 < sync()@resource://services-sync/stages/enginesync.js:149 < onNotify()@resource://gre/modules/services-sync/service.js:1271 < WrappedNotify()@resource://services-sync/util.js:141 < WrappedLock()@resource://services-sync/util.js:96 < _lockedSync()@resource://gre/modules/services-sync/service.js:1261 < sync/<()@resource://gre/modules/services-sync/service.js:1253 < WrappedCatch()@resource://services-sync/util.js:70 < sync()@resource://gre/modules/services-sync/service.js:1241 < <file:unknown>
    1417351810037 Sync.Engine.Addons DEBUG Refreshing reconciler state
    1417351810037 Sync.AddonsReconciler INFO Refreshing global state from AddonManager.
    1417351810037 Sync.Status DEBUG Status for engine addons: error.engine.reason.unknown_fail
    1417351810037 Sync.Status DEBUG Status.service: error.sync.failed_partial => error.sync.failed_partial
    1417351810037 Sync.ErrorHandler DEBUG addons failed: [Exception... "App. Quitting" nsresult: "0x80004004 (NS_ERROR_ABORT)" location: "JS frame :: resource://services-common/async.js :: checkAppReady/onQuitApplication/Async.checkAppReady :: line 126" data: no] Stack trace: checkAppReady/onQuitApplication/Async.checkAppReady()@resource://services-common/async.js:126 < waitForSyncCallback()@resource://services-common/async.js:101 < makeSpinningCallback/callback.wait()@resource://services-common/async.js:145 < _refreshReconcilerState()@resource://gre/modules/services-sync/engines/addons.js:231 < _syncStartup()@resource://gre/modules/services-sync/engines/addons.js:201 < SyncEngine.prototype._sync()@resource://services-sync/engines.js:1479 < WrappedNotify()@resource://services-sync/util.js:141 < Engine.prototype.sync()@resource://services-sync/engines.js:655 < _syncEngine()@resource://services-sync/stages/enginesync.js:199 < sync()@resource://services-sync/stages/enginesync.js:149 < onNotify()@resource://gre/modules/services-sync/service.js:1271 < WrappedNotify()@resource://services-sync/util.js:141 < WrappedLock()@resource://services-sync/util.js:96 < _lockedSync()@resource://gre/modules/services-sync/service.js:1261 < sync/<()@resource://gre/modules/services-sync/service.js:1253 < WrappedCatch()@resource://services-sync/util.js:70 < sync()@resource://gre/modules/services-sync/service.js:1241 < <file:unknown>
    1417351810038 Sync.Synchronizer INFO Sync completed at 2014-11-30 13:50:10 after 3.96 secs.
    1417351810038 Sync.SyncScheduler DEBUG Next sync in 600000 ms.

    Yes it is checked on both devices and my mini Mac. I have also tried unchecking then rechecking and rebooting etc but still no joy.

  • AD Server does not Sync with another AD

    My problem is as title, previously my server encounter DNS issues, but after delete all the event log and restart the event log is tested good. But some how now the AD do not sync.
    Here is the DCDIAG
    C:\Users\sysop>dcdiag
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    Home Server = Server-DC01
    * Identified AD Forest.
    Done gathering initial info.
    Doing initial required tests
    Testing server: Default-First-Site-Name\Server-DC01
    Starting test: Connectivity
    ......................... Server-DC01 passed test Connectivity
    Doing primary tests
    Testing server: Default-First-Site-Name\Server-DC01
    Starting test: Advertising
    ......................... Server-DC01 passed test Advertising
    Starting test: FrsEvent
    There are warning or error events within the last 24 hours after the
    SYSVOL has been shared. Failing SYSVOL replication problems may cause
    Group Policy problems.
    ......................... Server-DC01 passed test FrsEvent
    Starting test: DFSREvent
    ......................... Server-DC01 passed test DFSREvent
    Starting test: SysVolCheck
    ......................... Server-DC01 passed test SysVolCheck
    Starting test: KccEvent
    ......................... Server-DC01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    ......................... Server-DC01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    ......................... Server-DC01 passed test MachineAccount
    Starting test: NCSecDesc
    ......................... Server-DC01 passed test NCSecDesc
    Starting test: NetLogons
    [Server-DC01] User credentials does not have permission to perform this
    operation.
    The account used for this test must have network logon privileges
    for this machine's domain.
    ......................... Server-DC01 failed test NetLogons
    Starting test: ObjectsReplicated
    ......................... Server-DC01 passed test ObjectsReplicated
    Starting test: Replications
    [Replications Check,Replications Check] Inbound replication is
    disabled.
    To correct, run "repadmin /options Server-DC01 -DISABLE_INBOUND_REPL"
    [Replications Check,Server-DC01] Outbound replication is disabled.
    To correct, run "repadmin /options Server-DC01 -DISABLE_OUTBOUND_REPL"
    ......................... Server-DC01 failed test Replications
    Starting test: RidManager
    ......................... Server-DC01 passed test RidManager
    Starting test: Services
    Could not open NTDS Service on Server-DC01, error 0x5 "Win32 Error 5"
    ......................... Server-DC01 failed test Services
    Starting test: SystemLog
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 13:28:32
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:40
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:41
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:41
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:42
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:44
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:45
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:47
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:48
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:49
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:50
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:51
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:51
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:52
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:53
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:54
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:55
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:56
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:28:57
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 13:29:33
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 13:31:00
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 13:31:11
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:31:19
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:31:20
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:31:21
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:31:22
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:31:23
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:31:26
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x00000457
    Time Generated: 09/05/2014 13:31:27
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 13:46:02
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 13:48:14
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 13:53:15
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x40000004
    Time Generated: 09/05/2014 13:53:15
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 13:53:17
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 13:53:26
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 14:01:03
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 14:11:51
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 14:12:52
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 14:13:25
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 14:14:10
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 14:15:10
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 14:16:05
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    An Error Event occurred. EventID: 0x80000003
    Time Generated: 09/05/2014 14:17:57
    EvtFormatMessage failed, error 15100 Win32 Error 15100.
    (Event String (event log = System) could not be retrieved, error
    0x3afc)
    ......................... Server-DC01 failed test SystemLog
    Starting test: VerifyReferences
    ......................... Server-DC01 passed test VerifyReferences
    Running partition tests on : ForestDnsZones
    Starting test: CheckSDRefDom
    ......................... ForestDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... ForestDnsZones passed test
    CrossRefValidation
    Running partition tests on : DomainDnsZones
    Starting test: CheckSDRefDom
    ......................... DomainDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... DomainDnsZones passed test
    CrossRefValidation
    Running partition tests on : Schema
    Starting test: CheckSDRefDom
    ......................... Schema passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... Schema passed test CrossRefValidation
    Running partition tests on : Configuration
    Starting test: CheckSDRefDom
    ......................... Configuration passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... Configuration passed test CrossRefValidation
    Running partition tests on : dunhambush
    Starting test: CheckSDRefDom
    ......................... dunhambush passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... dunhambush passed test CrossRefValidation
    Running enterprise tests on : dunhambush.dunham-bush.com
    Starting test: LocatorCheck
    ......................... dunhambush.dunham-bush.com passed test
    LocatorCheck
    Starting test: Intersite
    ......................... dunhambush.dunham-bush.com passed test
    Intersite
    Here is the IPCONFIG
    C:\Users\sysop>ipconfig
    Windows IP Configuration
    Ethernet adapter Local Area Connection 7:
    Connection-specific DNS Suffix . :
    IPv4 Address. . . . . . . . . . . : 172.16.252.1
    Subnet Mask . . . . . . . . . . . : 255.255.252.0
    Default Gateway . . . . . . . . . : 172.16.252.254
    Ethernet adapter Local Area Connection 1:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Tunnel adapter Local Area Connection* 8:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Tunnel adapter Local Area Connection* 9:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Tunnel adapter Local Area Connection* 13:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :

    Hi All,
    Yes, this issues server is recover by using image.  "DSA not writable" value in regedit is 4.  It is only way to resolve this issues by using USN
    rollback?
    After doing the demote of the DC will the policy will erase too? 
    Another question, after demote the DC, what i need to do is create a new global catalog. Will the policy will copy from another server?
    Thank.
    Recovered by using an image? Unfortunately, that's not supported with anyting other than a Hypervisor (HyperV, VMware, Infoblox, etc), and an operating system (Windows 2012 or newer), that supports the VM-GenerationID attribute. Otherwise, for versions that
    don't support it, once a DC is in a rollback state, forget it.
    As I've suggested, and as Meinolf also suggested, just run dcpromo /forceremoval and clean up the database, rebuild the DC from scratch (you can use a SYSPREPPED image if you like), and re-promote it. It's quicker, less of a hassle and no headaches.
    As for DHCP on it, you can export the database if you like, and re-import it after you re-promote it.
    Move a DHCP Database to Another Server
    http://technet.microsoft.com/en-us/library/dd183705(WS.10).aspx
    For future reference, please use supported AD backup methods.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Maybe you are looking for