ACE: probe with serverfarm not working
Hello
When i use one probe configured for port 8080 with serverfarm which users realservers port 8080 everything works fine. But i wanted to create one generic probe and use for all of my serverfarms. I hoped that this generic (tcp probe) probe will use ports of each serverfarm, but it uses default port 80. Is it possible to use one generic probe for all serverfarms which have different ports ? How ?
It worked in CSM, but it does not work in ASA :(
Thanx
if you do not define a port in the probe config, it should take the one defined in the serverfarm.
Just like the CSM.
Gilles.
Similar Messages
-
Axis bank net secure with webpin not working on ipad2
Hi,
Axis bank net secure with webpin not working on ipad2
Lt me know how to proceedTry using their App:
https://itunes.apple.com/in/app/axis-bank-mobile-application/id517266358?mt=8 -
Since installing Yosemite, Airplay with Freebox not working
Since installing Yosemite, Airplay with Freebox not working
With Maverick Airplay working wellIf you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Try deleting the printer and scanner and add them back.
Also try Applications/Image Capture to see if it can find the printer and scanner. -
Wifi connection with 4s not working after installing new software ios6
wifi connection with 4s not working after installing ios 6.
Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts. -
For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.
Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Applications associated with workstations not working
Hello,
I have onld zen 7.x, on netware.
Applications associated with workstations not working or appearing in one container. Not sure if it every worked. Apps work fine with users.
I am in a bind, since I need to get the app out in the workstation space.
It maybe rights or simple install error with the ZEN from the begining.
thanks for any help or ideas.. Yes I know I need to get to Zen 11.
PhilPhilJannusch,
> Applications associated with workstations not working or appearing in
> one container. Not sure if it every worked. Apps work fine with users.
>
> I am in a bind, since I need to get the app out in the workstation
> space.
Please tell us more as "not working" can mean a lot of things. So:
Are they user or workstation associated?
Are those for whick they do not work (users or workstations) all in the
same container?
In what way do they not work?
Any errors?
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms -
I am getting frustrated with Apple not working with Flash Player on some of my favorite web sites! Is there another alternative to watching these site options on my I-pad?
Flash is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices - something which they have never managed to do and which they have now given up on trying to do.
Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app). -
My original computer that I set up my iPhone 4 with
Does not work.....can I use a new computer to sync
The phone....how do I do this and is there a risk of
Of losing any apps, music etcTry this:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
ACE - SSL Termination is not working
HTTPS is not working from official IE browser but it is working from test Firefox browser. However HTTP is working with both IE and Firefox browsers. This is true for multiple implementations on the ACE service module with SSL termination.
ACE software 3.0(0)A1(4a)
IE v6 SP3 Cipher 128
Firefox v3.6.3
Sample configuration:
access-list FT ethertype permit bpdu
access-list ALL-ACCESS extended permit icmp any any
access-list ALL-ACCESS extended permit ip any any
crypto chaingroup ROOT-CERT
cert abc.PEM
cert xyz.PEM
parameter-map type ssl SSL-PARAMETER-1
cipher RSA_WITH_RC4_128_MD5
cipher RSA_WITH_RC4_128_SHA
cipher RSA_WITH_AES_128_CBC_SHA priority 2
cipher RSA_WITH_AES_256_CBC_SHA
cipher RSA_EXPORT1024_WITH_DES_CBC_SHA
parameter-map type ssl SSL-PARAMETER-2
cipher RSA_WITH_AES_128_CBC_SHA priority 2
ssl-proxy service SSL-1
key KEY-1.PEM
cert CERT-1.PEM
chaingroup ROOT-CERT
ssl advanced-options SSL-PARAMETER-1
ssl-proxy service SSL-2
key KEY-1.PEM
cert CERT-1.PEM
chaingroup ROOT-CERT
ssl advanced-options SSL-PARAMETER-2
ssl-proxy service SSL-3
key KEY-1.PEM
cert CERT-1.PEM
chaingroup ROOT-CERT
rserver host server1
ip address 10.100.15.89
inservice
rserver host server2
ip address 10.100.15.121
inservice
probe http PROBE-1
interval 30
faildetect 2
request method get url /keepalive.htm
expect status 200 200
serverfarm host SERVERFARM-1
probe PROBE-1
rserver server1 80
inservice
rserver server2 80
inservice
sticky ip-netmask 255.255.255.255 address both STICKY-1
timeout 30
replicate sticky
serverfarm SERVERFARM-1
class-map type management match-any REMOTE-ACCESS
match protocol icmp any
match protocol snmp any
match protocol ssh any
match protocol https any
class-map match-all VIP-1
match virtual-address 10.100.15.140 tcp eq https
class-map match-all VIP-2
match virtual-address 10.100.15.140 tcp eq www
policy-map type management first-match REMOTE-ACCESS
class REMOTE-ACCESS
permit
policy-map type loadbalance first-match POLICY-1
class class-default
sticky-serverfarm STICKY-1
policy-map multi-match LB-1
class VIP-1
loadbalance vip inservice
loadbalance vip icmp-reply active
loadbalance policy POLICY-1
ssl-proxy server SSL-1
(i have tried with ssl-proxy server SSL-2 and ssl-proxy server SSL-3 but did not helP)
policy-map multi-match LB-2
class VIP-2
loadbalance vip inservice
loadbalance vip icmp-reply active
loadbalance policy POLICY-1
interface vlan 15
description client vlan
bridge-group 15
mac-sticky enable
access-group input FT
access-group input ALL-ACCESS
access-group output ALL-ACCESS
service-policy input REMOTE-ACCESS
service-policy input LB-1
service-policy input LB-2
no shutdown
interface vlan 2015
description server vlan
bridge-group 15
mac-sticky enable
access-group input FT
access-group input ALL-ACCESS
access-group output ALL-ACCESS
service-policy input REMOTE-ACCESS
no shutdown
interface bvi 15
description bridge group
ip address 10.100.15.5 255.255.255.0
peer ip address 10.100.15.6 255.255.255.0
alias 10.100.15.4 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 10.100.15.1
note: Subnet, Server Name, Certificate Name and Key Name are modified for security reason.Hello,
We will not be able to determine why your SSL terminated connections fail with only your config. You may want to take a look at a similar thread where someone else was having problems with IE and SSL termination, but Firefox worked fine. It also includes a solid action plan you can use to gather data needed to diagnose root cause. That thread can be viewed at the following link:
https://supportforums.cisco.com/thread/2025417?tstart=0
Also, the ACE software you are running is extremely old now and very buggy. I would strongly urge you to upgrade to A2(2.4) as soon as possible. It will help you avoid some headaches as you move forward.
Hope this helps,
Sean -
Read Only Display of Radio group and Text area with counter not working
Hello,
I am using Apex 3.2, with 10g for the database
I have this form, with fields that will set to read only when status = 'closed'
All of the fields display as read only except for 2. I cannot figure out why this is not working correctly.
1st field is Issues that is a text area with character counter, with a sql query behind it, that is set to null unless the query is pulling in the data.
2nd field is Status which is a radio group that will not display as read only when status = 'closed'
I have other fields on the form with the same format and they change to read only when the status = 'closed', I have even copied the pl/sql expression from one field to these fields and it still doesn't work correctly. I have also tried javascript for an on load event, which works, but once I click on the save button, it disables all of the page items, which works correctly, but I purposely forget to enter information, to make sure the validations are firing correctly, which it does, but the script disables everything, not allowing me to correct the errors. The javascript is firing on the on page load event.
Any help on this is greatly appreciated.
MaryDung,
That API seems to have a bug, it returns true/false/null, so you could use 'return not nvl(htmldb_util.current_user_in_group(p_group_name => 'APP Admin'),false)' to get a false value.
Unfortunately there's another problem: using the read-only attributes for checkbox or radiogroup item makes them hidden. My suggestion would be to create another item that has disabled="disabled" in the HTML Form Element attribute in the item definition and display that item or the non-disabled item alternately, using conditions based on the current_user_in_group logic.
Scott -
MacBook Pro to TV with RCA - Not working
Hi guys, I'm trying to connect my Macbook pro 08 to my new Samsung HD TV. I'm using a DVI-D to HDMI for the video which works great, but I'm using RCA to the headphone jack for Audio and it's not working. I've tried playing with the settings in my TV but cannot change the Audio input to analog. I'm guessing my TV thinks it's getting the audio from the HDMI, but the DVI-D does not carry audio.
Does anyone know how to get the audio to work with RCA cables? Or is there an adapter that can combine my audio into the HDMI input?
Any help would be appreciated.
(My TV has 2 HDMI ports, component, and RCA ports as well as a USB)Yes, it is the ones on the left, but you're not going to hear any audio because your input selection must be on Component on the TV in order to get the audio out of that input. HDMI and Component are two different inputs on your Input menu selection. Do this, play some audio on your Mac and then flip to Component on the TV with your stuff hooked up. I bet you hear the sounds, but no video and when you're on HDMI, you see the video but no sounds. That's because it's two different inputs.
Also, your 2008 MBP doesn't support Audio passthrough the MiniDisplayPort, so you're kind hosed unless you do external speakers like Grant suggested. -
Crystal Report formula with datediff not working as expected
We need a Crystal Report formula to display the number of seconds the oldest arriving call has been waiting. Across multiple resources that can each have an "oldest call". The database stores a datetime value for the time the oldest call arrived. If there are no waiting calls, then this field is NULL. (MSSQL database). It seemed reasonable to implement this in a formula that 1) discovers the minimum of "oldest call" timestamps in the selected records, and 2) to use "datediff" to produce the difference (in seconds) between the "oldest call" timestamp and current time.
The first attempt at this relied on "implied" iteration that could be done within a formula. Something like:
data: OLDESTARRIVALTIME
null
'2014-06-14 08:08:08.000'
null
'2014-06-14 08:07:55.000'
null
whilereadingrecords;
datetimevar minArrival;
if isNull({SVCCLASSMEASURES_VW.OLDESTARRIVALTIME}) = False
and minArrival < {SVCCLASSMEASURES_VW.OLDESTARRIVALTIME} then
minArrival := {SVCCLASSMEASURES_VW.OLDESTARRIVALTIME};
DateDiff("s", minArrival, {SVCCLASSMEASURES_VW.UTCDATE})
We tried storing the values of OLDESTARRIVALTIME in an array. We could see it iterating, but the values in the array only contained
the column value from the first record.
This was to solve the problem of screening null values and producing the minimum of the set.
Since that didn't work (and the web articles seemed to imply this would iterate over all the records, we tried another approach. This
time we set NULL timestamps in the table to a timestamp far in the future, so that we could directly apply "minimum" to produce
the correct "begin" for datediff.
data: OLDESTARRIVALTIME
'2030-01-01 00:00:00.000'
'2014-06-14 08:08:08.000'
'2030-01-01 00:00:00.000'
'2014-06-14 08:07:55.000'
'2030-01-01 00:00:00.000'
datetimevar minArrival = minimum({SVCCLASSMEASURES_VW.OLDESTARRIVALTIME});
datetimevar minUTC = minimum({SVCCLASSMEASURES_VW.UTCDATE});
if minArrival < minUTC then
DateDiff("s", minArrival, minUTC)
else
0
(minUTC would be current time in UTC)
So, to start things off, the last formula produces negative numbers! They hover in negative seconds within a negative minute (-33, -45, etc.).
That's inconceivable, considering the test for minArrival < minUTC. Both of the fields are "datetime".
As it turns out, in the near term, it's most important to get the second formula working. And, of course, insights into getting the first
formula to work are welcome as well!
Have we run into some weird behavior of the "DateDiff" function?
Thanks!If DateDiff is always returning a negative number you could try swapping the dates around in the call to DateDiff - it should look like this:
DateDiff("s", minUTC, minArrival)
Or you could use the Absolute Value of the calculation:
Abs(DateDiff("s", minUTC, minArrival) )
As for your first formula, you need to initialize the variable to a value prior to using it in the comparison. If you don't, its value is null and comparing it against a value won't work. (See What is Null and Why is it Important for Crystal Reports | SAP BI BLOG for a blog that I wrote about working with nulls in Crystal.)
You should change your existing formula to something like this:
whilereadingrecords;
datetimevar minArrival;
if OnFirstRecord then minArrival := DateTime(2013, 1, 1, 0, 0, 0);
if not isNull({SVCCLASSMEASURES_VW.OLDESTARRIVALTIME})
and minArrival > {SVCCLASSMEASURES_VW.OLDESTARRIVALTIME} then
minArrival := {SVCCLASSMEASURES_VW.OLDESTARRIVALTIME};
Note how I changed the If statement. Also, you want to replace minArrival with the field value if the field is less than the current value of minArrival - so you need to use ">" instead of "<" in the comparison. Place this formula in the details section. It will now show anything because of the semi-colon on the end. This will ensure that it gets evaluated for every record.
Now, create a second formula that looks like this:
whileReadingRecords;
datetimevar minArrival;
DateDiff("s", minArrival, {SVCCLASSMEASURES_VW.UTCDATE})
Place this formula in a footer section - it will not work in a header section. If you need it in a header section you might be able to take the "whilereadingrecords" off of both formulas and use the "Maximum()" summary function to get the correct value.
-Dell -
Binding gateway service with List not working properly with expand
Hi all,
We have an orderlist with details, we use the splitapp for it, it's working nicely with a gatewayservice. We have now added with expand 2 orderpartners. I see the 2 partners, only is it completly the same data. I checked the oData structure and I see indeed that the 2 partners are the same. This is weird, because when I execute the service, via my browser, I see 2 different partners.
If I execute the service directly via the read function, I see in the oData that I also have 2 different partners. So my conclusion is that the direct read of the service is working and executing the service via the sap.m.List is not working with the expand.
Now my question is, does somebody know what's going wrong here, or is it a bug in the sap.m.List? Below you find code snippets how I call the service.
This call is working:
oModel.read("/OrderListSet", null, ["$orderby=BegTstmp asc&$filter=Userid eq 'user' and DateFrom eq datetime'2014-04-20T00:00:00' and DateTo eq datetime'2014-04-27T00:00:00'&$expand=OrderPartners"], null, function(oData, oResponse){
}, null );
The binding via the sap.m.list is:
var oList = new sap.m.List("orderList", {
mode: "{device>/listMode}",
items: {
path: "/OrderListSet",
parameters: {expand: "OrderPartners"},
template : new sap.m.StandardListItem({
title: {
parts: [
{path: "BegTstmp", type: new sap.ui.model.type.DateTime({pattern: "H:mm"})},
{path: "DataCol2"}
formatter : function(strDate, strDescription) { return strDate + " - " + strDescription; }
description: {
parts: [
"DataCol3",
"DataCol4",
"DataCol5",
"DataCol6"
type: sap.m.ListType.Navigation,
icon: "{icon}",
customData: [
new sap.ui.core.CustomData({
key: "orderId",
value: "{Orderid}"
new sap.ui.core.CustomData({
key: "type",
value: "{Type}"
// Sort the list on date and group the list on day
sorter: new sap.ui.model.Sorter("BegTstmp", false, oGrouper),
// Filter the list, this directly refrenced to the gatewayservice
filters: [
util.Filter.getUserId(),
util.Filter.getCurrentWeekFromFilter(),
util.Filter.getCurrentWeekToFilter(),Fine. If you're trying to bind any attributes of OrderPartners, bind it as OrderPartners/attribute-name. Say if "BegTstmp" an attribute of OrderPartners bind it as OrderPartners/BegTstmp.
Regards
Sakthivel -
Inline with text not working in pages 5
I just upgraded to Pages 5.0. A lot of functionality has been removed, but also at least one feature that is there is not working for me. Inserting an image onto a document and setting up the image to "move with text" and "inline with text" is not working, as the image is staying fixed, and there is text wrapping around it. The interesting thing is that old images inserted and setup the same way using Pages 4.3 are moving with the text correctly, and there is no wrapping. Help!
You will have to use File > Revert to or File > Export to > Pages '09.
-
WEBUTIL_HOST.NONBLOCKING with quotes not works more !
Hi,
Forms 10.1.2.3
Java 1.6_27, 1.6_34, 1.7_21
windows 7
Office 2010
the interesting thing is we have changed nothing in the code for last 3 years
We have not performed a Windows or Java update.
Overnight, the call does just work like in example 2. But then I can not use more space in the Filename !!
1)
the last 3 years was used this call:
WEBUTIL_HOST.NONBLOCKING('cmd /c "C:\Program Files (x86)\Microsoft Office\Office14\winword.exe" "C:\tmp\Docs 2013.doc"');
2)
This call works now
Space was removed. Docs2013.doc instead Docs 2013.doc and without quotation marks
WEBUTIL_HOST.NONBLOCKING('cmd /c "C:\Program Files (x86)\Microsoft Office\Office14\winword.exe" C:\tmp\Docs2013.doc');
3)
This not works
space was removed. Docs2013.doc instead Docs 2013.doc and again in quotes
WEBUTIL_HOST.NONBLOCKING('cmd /c "C:\Program Files (x86)\Microsoft Office\Office14\winword.exe" "C:\tmp\Docs2013.doc"');
I do not understand why this behavior occurs suddenly
someone has an idea ?
thx
AlfredThere have been some significant changes in Java 7U21 which will impact the way CLIENT_HOST and WEBUTIL_HOST will now work. We are aware of these changes and are trying to determine how much of the old behavior we can restore. If your issue only reproduces in Java 7U21, feel free to contact Support and mention bug 16686443
That said, I would recommend using this code in place of yours:
Declare
my_cmd varchar2(255);
Begin
my_cmd := 'rundll32 shell32,ShellExec_RunDLL '|| :t1;
CLIENT_HOST(my_cmd);
End;In the above code, :t1 might be a text field where the user would enter the path and name of the file to open. For example: C:\tmp\Docs 2013.doc
Alternatively, if you feel the need to hard code the value, it might look like this:
Declare
my_cmd varchar2(255);
Begin
my_cmd := 'rundll32 shell32,ShellExec_RunDLL C:\tmp\My Directory\test.xls';
CLIENT_HOST(my_cmd);
End;This code has been tested on Forms 11.1.2.1 using Java 7U21. The same code should work on Forms 10.1.2.3, but keep in mind that Java 7U21 is not supported for use with Forms 10.
Maybe you are looking for
-
Smartforms - difference in auto-generated FM name in different systems
Hi, The situation is: I have created a smartform in our Dev application server and tested it to achieve the view I needed. The Dev system generates FM with automatic name /1BCDWB/SF00000005. I have successfuly transported it to our test system and ch
-
I have a program on my computer called Pivot Stickfigure Animator which I use to make graphics. Is there a way to read a Pivot file into an Image Array?
-
J2ee server stopped netweaver linux
Hi, i've installed the netweaver linux java and abap vmware trial installation was succesfull i could start the all processes but not the server process, this one stopps automatically with the following answer: JHVM_BuildArgumentList: main method arg
-
I use Firefox 6.0.2. When I shut the browser and try to reopen it I get a message saying that Firefox is still running and that I should reboot. This happens constantly. Why does this happen and is there a way around it?
-
How to launch code file.exe java
As I directly serve to launch a lines executable situated in a directory as the code java