ACE timeout for different Serverfarms

I have a Business unit that publishes an application that is externally available. We Reverse Proxy the VIP to allow the connection externally. They would like to impose different application timeouts for internal users (1 hour) and external users (30 Minutes) . The application can not differentiate between an external or internal source so our option is either seperate serverfarms with seperate real servers with different configuration files.
My question is, is there any other way to do this within the ACE so that we don't have to spin up seperate Servers with different configuration files.
I would also like to maintain one VIP address if possible.

You can maintain 1 VIP but you'll have to use header rewrite and work with dev. team of your application.
It's related to the session state tracked by a cookie the application sends (either as a Set-Cookie or a token embedded in URLs)
Make two different serverfarms (with the same set of real servers).
Make a class-map matching the IP addresses of internal users (RFC 1918 ?)
For this class-map, add a field in each HTTP request coming in
"X-Internal:YES"
apply this on each request with the option
header-rewrite per-request
The application team just has to parse each header for the pattern you've just added and then changing the timeout value to the one they want.
For the class-default (external users) you can add "X-Internal:NO", it's cleaner but not strictly necessary.

Similar Messages

Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

<i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

Different timeout for two protected applications with same AM 7.1

I have a AM 7.1 configuration planned.
We need to protect two different application url's; And provide different session & idle timeout for each of these url's.
Can we configure different timeout for two protected URL's / applications configured with same AM 7.1 ?
/Kasi

Hi,
I have not actually configured this, but you can create a policy for that application with an "Active Session Time" condition.
You also have an option there to destroy or not the session.
But if the user is allowed to do SSO between the 2 applications then you should consider if you can destroy the session or not.
Hope this helps.
Andrei

Sticky group for multiple serverfarms

For ACE, would the inclusion of more than one serverfarm on a sticky group create a conflict for the connections to servers?
On CSM, usig the same sticky group on two different vservers will create a conflict for corresponding serverfarms.
Is this an issue on ACE - should a separate sticky group created foe each ServerFarm?
sticky ip-netmask 255.255.255.0 address source Group1
timeout 60
replicate sticky
serverfarm SF1
serverfarm SF2
serverfarm SF3

Its same as CSM. You can have just one serverfarm per sticky group.
you should never use the same sticky group for different farms, otherwise that will break the VIP logic i.e. connections meant to serverfarm1 could end up being sent to serverfarm2.
Syed Iftekhar Ahmed

Error: Timeout for content (ias1.0.2.2 on W2000)

I have recently installed iAS 1.0.2.2 (standard edition)
Database is 8.1.7.1.1
OS is Windows 2000
Machine is Compaq Armada M700 with 512Mb memory
The install seemed to go fine, but some of the Portal administrative portlets are displaying the message "Error: Timeout for content" (e.g. instead of the "Services" portlet). Different portlets timeout each time I refresh the page. The machine appears to be healthy. iAS and the database are the only Oracle software installed. The 81711 patch was applied after the original iAS installation in the hope of fixing the problem. Portal proxy configuration has not been changed.
I've tried a couple of changes in the zone.properties file without success e.g.
servlet.page.initArgs=stall=30
servlet.page.initArgs=requesttime=1000
Jserv.log has errors like this:
[01/06/2001 14:24:54:993 BST] page/JNI: Exception when trying to connect in 1.
[01/06/2001 14:24:54:993 BST] page/Timeout occurred, label=27 url=http://MYHOST.MYDOMAIN:7778/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[01/06/2001 14:24:54:993 BST] page/ContentFetcher Unexpected Exception, name=content-fetcher20
java.net.SocketException: connect (code=10061)
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:313)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:269)
at java.net.Socket.<init>(Socket.java:125)
at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java, Compiled Code)
Has anyone encountered similar, or can anyone suggest a solution?
Regards, Mark
null

Futher to previous thread, I've just tried reinstalling on a clean database 8.1.7.1.1 EE (no invalid objects) as per release notes, and I'm still suffering the same "Timeout for content" in random portlets. Could it be a Windows 2000 issue (I'm running SP 1 as per release notes)? Or maybe something to do with the fact that the hostname has uppercase letters in it?
Jason suggested a proxy issue, but I haven't made any changes there - not even gone into that portlet.
Any advice would be greatly appreciated.
As an alternative, when will Linux 1.0.2.2 be available?
Regards, Mark
null

Can we define different session time-outs for different user types in the DD?

Hello,
Do you know a way to specify different session time-outs in deployment
descriptor for different users/roles?
For example:
Role-A should be invalidated after 10 minutes
Role-B should be invalidated after 100 minutes
Shortly, I would be grateful if you can help,
Fehmi.

"Fehmi" <[email protected]> wrote in message
news:3f50fb75$[email protected]..
>
Hello,
Do you know a way to specify different session time-outs in deployment
descriptor for different users/roles?
For example:
Role-A should be invalidated after 10 minutes
Role-B should be invalidated after 100 minutes
I don't believe you can timeout a session based on a user or a role. I think
you can just specify when
all sessions timeout (via the session descriptor). But, you may want to ask
in the weblogic.developer.interest.servlet newsgroup.

Resizable page for different screen sizes but with static image content. Shall I use media query?

I’m making a page that has of mostly image content. It’s a large circle in the middle so I want it to be centered vertically and horizontally. I also want it to stay centered and resized proportionally for different screen sizes. I’ve read about media query but it seems to me that the elements just become fluid. Can I make the elements stay in place using the media query?
I’m working in Dreamweaver CS5.5

Here's the code I'm working with now, I've taken away the things that I don't really understand.
It's working but I guess it won't hold when I start with the media queries.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
<head><style type="text/css">
body {}
div {
   font: 12px Arial;
span.bold { font-weight: bold; }
#the-circle {
height: 960px;
width:960px;
margin-left:650px;
margin: 0px 10px 0px 10px;
margin-left:650px;
.link-row {
position:absolute;
width: 960px;
height: 74px;
top: 130px;
left:660px;
.link-row-2 {
   position: absolute;
   width: 960px;
   height: 74px;
   top: 300px;
   left:660px;
.link-row-left {
float: left;
.link-row-right {
float: right;
.link-row-right {
float: right;
.link-row-right {
float: right;
</style></head>
<body>
<br /><br />
<div id="the-circle">
<img src="ACE Test/Logo-DW.png" width="960" height="960" />
</div>
<div class="link-row">
<div class="link-row-left"><img src="ACE Fotografier EP och Video/Logo/Wix ACE Logo.png" width="111" height="74" /></div>
</div>
<div class="link-row-2">
<div class="link-row-right"><img src="ACE Fotografier EP och Video/Logo/Wix ACE Logo.png" width="111" height="74" /></div>
</div>
</body></html>

Set Command Timeout For SQL Server

Hello,
How do you set the command timeout for the 'open' statement? I am running a Database via SQL Server and I tried the dialog box timeout statement (the check box on the advanced tab) and simply get an error. The manual shows a 'step.commandtimeout' but how is it implemented?
Thanks,
Kevin

Kevin -
I looked at the internal implementation of the CVI SQL Toolkit. The toolkit function that the step type uses is DBNewSQLStatement. Internally to the toolkit the function opens a recordset instead of a command object. The command timeout attribute is only available on a command object and not on a recordset object, so as implemented inside the toolkit the error is appropriate. I think the toolkit could have used a command object to create the recordset object and this would allow the toolkit to let you set the timeout attribute. Unfortuneately this is not the way it was done.
For the future I may investigate to see if there is a way to bypass this limitation by using different toolkit functions, but I am not sure if there a
re any side effects.
Scott Richardson (NI)
Scott Richardson
National Instruments

ST22 timeout for all LC related transactions LIVE cache start stop working from LC10

Hi Team
we are a getting a ST22 timeout for all LC related transactions LIVE cache start stop working from LC10
LC version 7.9
OS AIX
SAP SCM 7
SDBVERIFY giving the following error
Checking package Redist Python
Checking package Loader
Checking package ODBC
Checking package Messages
Checking package JDBC
Checking package DB Analyzer
ERR: Failed
ERR: Checking installation "Legacy" failed
ERR: Group of directory /sapdb/data/config/install changed [0 =>
sdbregview -l is showing good.
any idea what might went wrong.
trying to use sdbverify -repair_permissions , but not sure about the exact syntax to use.
and it is not related to timeout parameter, we tested with different timeout values, but still the same error.
thanks
Kishore Ch

Hello Kishore,
you could check the sizing of the liveCache data.
* Report /SAPAPO/TS_LCM_REORG_SNP has checks of the SNP planning areas for superfluous objects.
* Delete old/temporary APO data.
* /SAPAPO/TS_LCM_REORG report checked TS superfluous objects.
If you didn't create the planning versions, copy of planning versions & data load to liveCache, then create the SAP message to check your system on the question of the dataarea usage.
If you have the long running APO transactions => performance of the SCM system has to be checked.
If you have the bottleneck in liveCache & could not solve the case by yourself => create the SAP message to BC-DB-LVC and get SAP support.
Best regards, Natalia Khlopina

Using multiple apple id's for different purposes

We are a family of 4 with numerous devices. Here's the setup we've been using to manage different aspects of our apple life!
Each of us has an individual apple id, which we use on our individual devices for storage/backup, photo stream, facetime, calendar etc
We have one apple id, used on all devices for all app store/itunes purchases
We entered this id on each device with everything turned off except "find my iphone". This way we could be logged into the find my iphone app with one id and be able to see all our devices.
This has worked really well for us as a family. Well, yesterday my kids updated their phones (one 5 and one 4s) to ios 7. I have not done it yet. It does not seem to allow for the above setup, specifically where "find my iphone" is concerned. When I enter in that specific apple id as an additional icloud account, it doesn't offer the option of find my iphone. My ios 6 device says "only your main account can use photo stream, documents & data, and backup". Their device adds "find my iphone" to this list.
Does anyone know if this is a specific change apple made, or something that went wrong when initially setting up their updated phones.
TIA!

Thanks for your reply. But what I don't understand is, can I no longer have multiple icloud accounts, to be used for different purposes? Like I said, we have been using one apple id/icloud for storage etc and one for find my iphone.

[SOLVED] how to use diffrent iptables rules for different ppp account?

x86 plantform run arch linux system , have two network interface etn1 eth0 .eth1 connect to internet. eth0 connect to other terminals through switch. want use different iptables rules for different pppoe account .also want to know how to forbidden more than one terminals established pppoe link use same account at the same time .
Last edited by linuxsir (2013-09-26 06:48:01)

(You establish PPPoE sessions over the local network to the Arch machine? Which then routes the traffic?)
first question ,yes that is exactly what i am done. second question i also have a small scripts on windows pc to solve routes traffic problem
route -p delete 0.0.0.0
route -p add 192.168.9.0 mask 255.255.255.0 192.168.9.1
route -p add 0.0.0.0 mask 0.0.0.0 192.168.22.0
but after a while i found scripts is not necessary because windows always attempt to use PPPoE sessions as default internet connection local connection is also ok
and use -i pppX in my iptables rules dose not solve my problem , because same account start PPPoE session could be marked as ppp0 or ppp1. it is hard to identified which account start session.

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time?

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time? Or even add a "video slide" into the screensaver?
My business has 3 TVs displayed in our lobby, each with its own apple TV and they are all linked to the same photo stream. Currently the Atv screensaver displays the photostream pictures of our products for the default 3 seconds. We just added pics/slides that now display messages and useful info for our customers but I want that info to be displayed for a longer period of time than the pictures to give people a chance to read it.
I tried using flickr and powerpoint as a work around but no luck. I created a slide in powerpoint with play length of 15 secs and saved it as a wmv file. I added that file to a "screensaver" set in flickr and pointed the Atv screensaver to that flickr set. It still displays everything, pics and the wmv file at the default 3 sec.
I know I can increase the duration of all pics in the screensaver to display for longer but the goal is to have the pics display at 3 secs and the info slides to display at 15 secs.

Welcome to the Apple Community.
No that's not possible.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

Setting timeout for all the web test scripts in the solution

Hello,
I have around 16 web test scripts (using VSTS 2010 ultimate version) in my project (in a solution). By default the timeout set for each request is 60 sec. I need to increase the timeout to 180 sec. Currently, I am clicking on each request and modifying
the timeout parameter from the Properties window.
Is there any common setting for timeout available which would be acting across all the scripts?
Thanks.

Hello,
We only can set Timeouts for a separate request in Visual Studio Web Test. There is no way to set Timeout for all requests in VS IDE. But you can write you own logic code using
Timeout Property in a web test plugin to set Timeout for all requests in a web test.
About how to write a web test plugin, please see:
How to: Create a Web Performance Test Plug-In
Best regards,
Amanda Zhu <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

Creation of forms in Custom list for different departments in share point online .

Hello ,
We are using office 365 E3 plan in our organization.Recently we got a requirement from the management to create forms for different departments.I will explain a bit more on requirement.
We have three departments A, B & C .We want to create a form in such a way ,fields varies based on their respective department .If a form has 30 fields to fill , dept A fills
only first 10 fields which they need and will forward the form to next dept to fill remaining fields.Here when Dept A forwards the form the first 10 fields has to be hide for other depts .when Dept B and C logged into their accounts to fill the form only their
fields need to be available in the form and remaining options has to hide .After filling all fields from different dept . After filling the forms Dept A can see all the fields to check the data .
Any one can please help me out how to initiate the process to meet this requirement.

The simlest approch for you is to create 3 different list with 3 different forms. But you can update their connection string to store the data(xml) in same list or different list
Or try below:
http://www.sharepointsharon.com/2011/11/infopath-2010-one-form-multiple-views/
If this helped you resolve your issue, please mark it Answered

HR Authorisation Management for different companies in the same client

Hi,
Could anyone please help in this....
My client has two companies. They want to restrict the authorisation to both the companies so that no one can see each other companies data and at the same time access tha data.
For Eg, there are two payroll officers, each in both the companies, If i give authorisation to run Payroll driver(PC00_M40_CALC), anyone of them can run payroll for any of the companies. (though,their Payroll area is different). There are many restrictions to be maintained like Maintance of Master data, Maintanance of OM structure as assignement of position, running Payroll, viewing the payslip etc...
How can this all be restricted so that, the respective companies can view and access their own data without interfering in to the other company.
I could only find object P_PYEVRUN which helps me restrict to view the created documents of posting for other company code.
Can anyone put light on how i should proceed further... I heard we can restrict HR master data, but what all i know is we can restrict at infotype level. My problem is, two persons should access PA30(each from different companies), but should not be able to edit other companies data.
Thanks
--Pranitha

Hi ,
If you are creating the another company undar the same client . then you can not use different no. range.
or if you are going different client for different compnay code then you can use different number range for material master.
SAM

ACE timeout for different Serverfarms

Similar Messages

Maybe you are looking for