ACE XML Gateway Training Course

Hello,
Does anyone know of a company that offers a training course for the ACE XML Gateway? I have found many companies that claim to offer training, but no one acutally has any course dates. We have been working through our Global Knowledge rep for a couple months asking them to schedule a class but it sounds like there just isn't enough intrest to fill a class up. The only course dates that I have managed to find are in Europe.
Has anyone attended training on the AXG, or know of someone who has?
Thanks,
Mike

I'm not aware of any courses available in the US.  I've been keeping my eye open as well for the past 3-4 months.  I'm not able to attend any of the international classes unless they were offered online.

Similar Messages

  • ACE XML gateway version 5.1

    Hi, i am configuring a XML gateway 5.1. i have not WSDL file then i create a simple service proxy but does't work. we i try to browse the consumer interface error 500 and log say me “request matched no valid handler or route”. I think i am missing some part of the configuration.
    Friends, can you help me ??
    thanks so much

    I think it won't support. It will support WSDL 1.1 on ACE XML Gateway.
    http://www.cisco.com/en/US/prod/collateral/contnetw/ps5719/ps7314/product_data_sheet0900aecd8060acd2.pdf

  • ACE XML Gateway 6.0

    Does anyone know if the latest version 6.0 supports the latest WSDL standard WSDL 2.0? The 5.1 version only supports WSDL 1.1 standard.

    I think it won't support. It will support WSDL 1.1 on ACE XML Gateway.
    http://www.cisco.com/en/US/prod/collateral/contnetw/ps5719/ps7314/product_data_sheet0900aecd8060acd2.pdf

  • Installing ACE XML Gateway with F5 BigIP

    We currently have an F5 BigIP (2 redundant F5s actually) load balancing for our web sites. I am trying to install a Cisco XML Gateway.
    What is the best way to set this up?
    Thanks.
    Jason

    AXG runs as reverse proxy mode, similar to generic server, there is no more concern about deployment, just treat it as reverse proxy server, it will be fine.

  • ACE WAF XML Gateway 6.1.1 - arbitrarily monitoring and filtering

    Can someone explain why the ACE XML Gateway is monitoring some events and filtering others, when they are the same events?
    I have all mParamAll System Command injection signtatures in monitor mode on the firewall profile that is applied to both of the web applications in the two incidents below, but the firewall sometimes monitors one and sometimes blocks the other. They are both the same and should both be monitored only.
    Please help.
    May 10 2011 08:09:25.603 PM W Matched signature SysCommandInj_m.rm via rule CommandInject.mParamAll in request from ##.###.53.80 for application 'XXX XXX'. Match was in REQUEST_POSTPARAM['__EVENTVALIDATION'], which had value /wEWlwEC6<stripped for size>1sQICoMD1. Request path was: /Kview/CustomCodeBehind/base/courseware/classroom/. Create Exemption (monitor mode) FD0A320100001868DB87435D3D7F9AB0 FBIVAWAP reactor /waf/incident
    May 10 2011 02:13:27.037 PM W Matched signature SysCommandInj_m.tclsh via rule CommandInject.mParamAll in request from ##.###.53.80 for application 'YYYYY YYY'. Match was in REQUEST_POSTPARAM['__VIEWSTATE'], which had value mQjXnQ<stripped for size>laPxd3C8+. Request path was: /XXXX/ApprovalConsole.aspx. Create Exemption FD0A320100001866DA415B3C3D7F9964 FBIVAWAP reactor /waf/incident

    Anyone?
    It looks like multiple ip addresses can be configured through the console, is this all that is required? Do I need to setup listening ports for these new ip addresses or how do I get the WAF to proxy for multiple "virtual ip addresses"?
    Thank you,
    Jim

  • XML Gateway Software - OpenSSH

    Hello.
    I’m trying to remediate a vulnerability scan that was run against our ACE XML Gateway running version 6.1. The scan came back with three possible vulnerabilities all referring to various versions of OpenSSH. How do I confirm what OpenSSH version my XML Gateway is using?
    ACE XML Gateway 6.1-2009-10-20T15
    6.1-1138
    kernel: 2.4.21-47.ELsmp
    Cavium: 1.0-1
    Scan showed:
    OpenSSH Multiple Memory Management Vulnerabilities fixed in OpenSSH v3.7.1
    OpenSSH GSSAPI Credential Disclosure Vulnerability fixed in OpenSSH v4.2
    OpenSSH Signal Handling Vulnerability fixed in OpenSSH v4.4

    Hi Brad,
    The developement team has been adding security patches to the 3.6 OpenSSH for some time now.  They have told us that the AXG is not vulnerable to any of the security issues that 3.6 had.  Unfortunately, the only documentation we have is what you see on CCO.  If you require further information, then you'll need to open up a case with Cisco TAC so they can engage the necessary folks in engineering that can address your specific questions.
    I wish I could be of more help on this in this forum.
    Thanks,
    Sean

  • Purchase Order to Purchase Order using BPEL and/or XML Gateway

    Hi,
    Is there a way to do create a duplicate Purchase Order in another instance using BPEL and/or XML Gateway? We're looking to do A2A transactions, namely duplicating data from one instance to another (of course the functional setups would have to be the same). Thanks!!

    this is the perfect usace for the upcoming ESB (shuffling data with transforming from A to B) - but this can be done with BPEL too .. there are some solutions to this
    1) on a database level (db to db)
    2) having events setup'ed in the master instance, that fire a process that get's the data
    3) and then using the functions from iRep
    hth clemens

  • Training course recommendations in UK?

    Hi,
    Firstly, I'm aware this probably isn't the best place to be posting about training course, but didn't rally think it fitted anywhere else.
    My company have asked if I would like to go on a Web Development course. Obviously I said YES!
    But now I am tasked with working out what would be the most useful things to learn and where?
    I would class myself as a great graphic designer / beginner to better than average web designer. The type of things they would like my to be able to implement is online surveys, gather customer information, customer databases and so forth. Basically I would be implementing the marketing departments, well, marketing!
    So I thought I should be looking at PHP & SQL? Maybe some XML? What would others say? Also I'm looking for a reliable company, any suggestions?
    Ideally in the Bristol, Gloucestershire or Birmingham area, however London would be fine.

    I'm the instructor for the Dreamweaver CS4 - Getting Started three-day course offered by Highlander (http://highlander.co.uk), an Adobe authorized training centre. I normally teach at Highlander's training centre in London, but also do training off base (in February, I taught a course in Leeds). The course I teach is described as "designed for those with no previous experience of webpage / application development". As a result, it starts from the basics, but gets into quite advanced territory by the end of the three days, particularly if participants already have a reasonable knowledge of web development (as many of them do).
    Highlander also offers a PHP/MySQL course. Although I specialize in PHP/MySQL, the course is not taught by me. However, Highlander has discussed the possibility of me doing a more advanced Dreamweaver course that includes PHP/MySQL. Offering such a course would depend on sufficient people signing up for it. You might want to ask your company to inquire about arranging such a course, even though it's not currently listed on the training schedule (the person to contact is the Managing Director, Andy Gardiner).
    In case you don't know who I am, I'm an Adobe Certified Instructor for Dreamweaver and the author of a series of books on Dreamweaver, PHP, and MySQL (http://foundationphp.com).
    Of course, there are other training companies in the UK that others might be able to recommend.

  • EBS R12 XML Gateway Integration - Supplier information sync with MAXIMO

    Hello Guys.
    Recently I'm working on a EBS R12 implementation project, as customer already has MAXIMO application, they would like keep it ask "supplier" information syncronization between Oracle EBS R12 and MAXIMO through Oracle SOA Suite 10.1.3
    For EBS R12 supplier creation/update screens done, currently I found I can get supplier information out by configuring Oracle APPS adapter within Oracle ESB(Enterprise Service Bus) scenario to catch business events but may not perfect this way.
    Then we would like try XML Gateway but seems there're no "supplier" related XML Gateway fit in Oracle Apdater module browser :-(
    Appreciate if any one can guide/help........
    Finally being in Dec at the moment, Merry Christmas to everyone first !
    Dong

    DOCUMENT_ID is numeric, yet the value passed is not:
    x_value==>192124:0:102

  • Reg: XML Gateway Error while posting invoice (PROCESS_INVOICE_002 )

    I'm trying to post the PROCESS_INVOICE_002 to Oracle 11i XML gateway which is supposed to route to the mentioned trading partner.
    When I observed the status through Workflow Admin web App - > Transaction Monitor the message has reached the INBOUND Queue but it is not able to route it/ process it ... and goes to error state with
    The Standard:OAG, Transaction Type:INVOICE , Transaction SubType:PROCESS and Location Code Bigmart is not enabled in the XML Gateway Server. Pls check your Setup.
    Then I had corrected the setup with the proper TP configuration.
    Now I'm getting a different error.
    Kindly give me some inputs regarding this.
    Now it is giving the below mentioned error. Here is the Process Summary:
    Document ID blrgislin15:26ae9b47:11a9c4ae5b9:46b1
    Internal Control Number 1656
    External Transaction Type INVOICE
    External Transaction Subtype PROCESS
    Party ID
    Party Type
    Trading Partner Name N/A
    Site Name N/A
    Processing Date 19-Jun-2008 16:41:15
    Processing Status Error
    Processing Message ORA-06502: PL/SQL: numeric or value error: character string buffer too small - ECX_INBOUND_TRIG.WRAP_VALIDATE_MESSAGE
    Processing Logfile
    The XML Invoice I'm posting is :
    <PROCESS_INVOICE_002>
         <CNTROLAREA>
              <BSR>
                   <VERB value="PROCESS">PROCESS</VERB>
                   <NOUN value="INVOICE">INVOICE</NOUN>
                   <REVISION value="002">002</REVISION>
              </BSR>
              <SENDER>
                   <LOGICALID>BigMart</LOGICALID>
                   <COMPONENT>INVOICE</COMPONENT>
                   <TASK>PROCESS</TASK>
                   <REFERENCEID></REFERENCEID>
                   <CONFIRMATION>0</CONFIRMATION>
                   <LANGUAGE>ENG</LANGUAGE>
                   <CODEPAGE>UTF8</CODEPAGE>
                   <AUTHID>APPS</AUTHID>
              </SENDER>
              <DATETIME qualifier="CREATION">
                   <YEAR>2003</YEAR>
                   <MONTH>09</MONTH>
                   <DAY>22</DAY>
                   <HOUR>07</HOUR>
                   <MINUTE>30</MINUTE>
                   <SECOND>18</SECOND>
                   <SUBSECOND>0000</SUBSECOND>
                   <TIMEZONE>-0500</TIMEZONE>
              </DATETIME>
         </CNTROLAREA>
         <DATAAREA>
              <PROCESS_INVOICE>
                   <INVHEADER>
                        <AMOUNT qualifier="DOCUMENT" type="T">
                             <VALUE>6300</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <CURRENCY>USD</CURRENCY>
                             <DRCR>D</DRCR>
                        </AMOUNT>
                        <DATETIME qualifier="DOCUMENT">
                             <YEAR>2003</YEAR>
                             <MONTH>09</MONTH>
                             <DAY>23</DAY>
                             <HOUR>01</HOUR>
                             <MINUTE>00</MINUTE>
                             <SECOND>00</SECOND>
                             <SUBSECOND>0000</SUBSECOND>
                             <TIMEZONE>-0500</TIMEZONE>
                        </DATETIME>
                        <DOCUMENTID>10000</DOCUMENTID>
                        <DESCRIPTN>INVOICES FROM STAPLES</DESCRIPTN>
                        <REASONCODE>INVOICE</REASONCODE>
                        <PARTNER>
                             <NAME index="1">STAPLES-LA</NAME>
                             <PARTNRID>STAPLES-LA</PARTNRID>
                             <PARTNRTYPE>SUPPLIER</PARTNRTYPE>
                             <ADDRESS>
                                  <ADDRLINE index="1">22355 WEST ELEVEN MILE ROAD</ADDRLINE>
                                  <CITY>LOS ANGELES</CITY>
                                  <COUNTRY>US</COUNTRY>
                                  <POSTALCODE>48034</POSTALCODE>
                                  <STATEPROVN>CA</STATEPROVN>
                             </ADDRESS>
                             <CONTACT>
                                  <NAME index="1">JOHN STAPLES</NAME>
                                  <CONTCTTYPE>ACCOUNTING</CONTCTTYPE>
                                  <EMAIL>[email protected]</EMAIL>
                             </CONTACT>
                        </PARTNER>
                   </INVHEADER>
                   <INVLINE>
                        <AMOUNT qualifier="EXTENDED" type="T">
                             <VALUE>6300</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <CURRENCY>USD</CURRENCY>
                             <DRCR>D</DRCR>
                        </AMOUNT>
                        <AMOUNT qualifier="TOTAL" type="T">
                             <VALUE>6300</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <CURRENCY>USD</CURRENCY>
                             <DRCR>D</DRCR>
                        </AMOUNT>
                        <OPERAMT qualifier="UNIT" type="T">
                             <VALUE>6300</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <CURRENCY>USD</CURRENCY>
                             <UOMVALUE>1</UOMVALUE>
                             <UOMNUMDEC>0</UOMNUMDEC>
                             <UOM>EA</UOM>
                        </OPERAMT>
                        <QUANTITY qualifier="ITEM">
                             <VALUE>100</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <UOM>EA</UOM>
                        </QUANTITY>
                        <LINENUM>1</LINENUM>
                        <DESCRIPTN>1st Invoie Line</DESCRIPTN>
                   </INVLINE>
              </PROCESS_INVOICE>
         </DATAAREA>
    </PROCESS_INVOICE_002>

    Hi, Due to some other problem with my setup, I had to reinstall E-Biz, and again did all the configuration freshly and tried posting the same xml but for the current customer configuration. It went successfully. Here is the xml I'have posted. You can try configuring your transactions and Trading Partner as given in the XML gateway User Guide, which is available as part of the documentation.
    <?xml version="1.0"?>
    <!DOCTYPE PROCESS_INVOICE_002 SYSTEM "171_process_invoice_002.dtd">
    <PROCESS_INVOICE_002>
         <CNTROLAREA>
              <BSR>
                   <VERB value="PROCESS">PROCESS</VERB>
                   <NOUN value="INVOICE">INVOICE</NOUN>
                   <REVISION value="002">002</REVISION>
              </BSR>
              <SENDER>
                   <LOGICALID>Bigmart</LOGICALID>
                   <COMPONENT>INVOICE</COMPONENT>
                   <TASK>PROCESS</TASK>
                   <REFERENCEID></REFERENCEID>
                   <CONFIRMATION>0</CONFIRMATION>
                   <LANGUAGE>ENG</LANGUAGE>
                   <CODEPAGE>UTF8</CODEPAGE>
                   <AUTHID>APPS</AUTHID>
              </SENDER>
              <DATETIME qualifier="CREATION">
                   <YEAR>2008</YEAR>
                   <MONTH>07</MONTH>
                   <DAY>08</DAY>
                   <HOUR>07</HOUR>
                   <MINUTE>30</MINUTE>
                   <SECOND>18</SECOND>
                   <SUBSECOND>0000</SUBSECOND>
                   <TIMEZONE>-0500</TIMEZONE>
              </DATETIME>
         </CNTROLAREA>
         <DATAAREA>
              <PROCESS_INVOICE>
                   <INVHEADER>
                        <AMOUNT qualifier="DOCUMENT" type="T">
                             <VALUE>6300</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <CURRENCY>USD</CURRENCY>
                             <DRCR>D</DRCR>
                        </AMOUNT>
                        <DATETIME qualifier="DOCUMENT">
                             <YEAR>2008</YEAR>
                             <MONTH>07</MONTH>
                             <DAY>08</DAY>
                             <HOUR>01</HOUR>
                             <MINUTE>00</MINUTE>
                             <SECOND>00</SECOND>
                             <SUBSECOND>0000</SUBSECOND>
                             <TIMEZONE>-0500</TIMEZONE>
                        </DATETIME>
                        <DOCUMENTID>10001</DOCUMENTID>
                        <DESCRIPTN>INVOICES FROM STAPLES</DESCRIPTN>
                        <REASONCODE>INVOICE</REASONCODE>
                        <PARTNER>
                             <NAME index="1">BigMart</NAME>
                             <PARTNRID>BigMart</PARTNRID>
                             <PARTNRTYPE>Customer</PARTNRTYPE>
                             <ADDRESS>
                                  <ADDRLINE index="1">100 Main Street Bentonville</ADDRLINE>
                                  <CITY>Arizona</CITY>
                                  <COUNTRY>US</COUNTRY>
                                  <POSTALCODE>38019</POSTALCODE>
                                  <STATEPROVN>AR</STATEPROVN>
                             </ADDRESS>
                             <CONTACT>
                                  <NAME index="1">JOHN STAPLES</NAME>
                                  <CONTCTTYPE>ACCOUNTING</CONTCTTYPE>
                                  <EMAIL>[email protected]</EMAIL>
                             </CONTACT>
                        </PARTNER>
                   </INVHEADER>
                   <INVLINE>
                        <AMOUNT qualifier="EXTENDED" type="T">
                             <VALUE>6300</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <CURRENCY>USD</CURRENCY>
                             <DRCR>D</DRCR>
                        </AMOUNT>
                        <AMOUNT qualifier="TOTAL" type="T">
                             <VALUE>6300</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <CURRENCY>USD</CURRENCY>
                             <DRCR>D</DRCR>
                        </AMOUNT>
                        <OPERAMT qualifier="UNIT" type="T">
                             <VALUE>6300</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <CURRENCY>USD</CURRENCY>
                             <UOMVALUE>1</UOMVALUE>
                             <UOMNUMDEC>0</UOMNUMDEC>
                             <UOM>EA</UOM>
                        </OPERAMT>
                        <QUANTITY qualifier="ITEM">
                             <VALUE>100</VALUE>
                             <NUMOFDEC>2</NUMOFDEC>
                             <SIGN>+</SIGN>
                             <UOM>EA</UOM>
                        </QUANTITY>
                        <LINENUM>1</LINENUM>
                        <DESCRIPTN>1st Invoie Line</DESCRIPTN>
                   </INVLINE>
              </PROCESS_INVOICE>
         </DATAAREA>
    </PROCESS_INVOICE_002>

  • XML Gateway: Error while posting to a OTA URL

    Hi
    I am using the code in XML Gateway user guide for OTA Post over HTTPS. Am getting an IOException that i am unable to tunnel through the proxy.
    The user guide code can be seen here : http://docs.oracle.com/cd/E18727_01/doc.121/e12954/T319774T319783.htm
    But, when i use Chrome's REST Client and set the proxy to be same proxy as i use in the code above, I am getting a successful response.
    Am unable to understand the difference between both.
    The exception that i get is as below:
    Exception = java.io.IOException: Unable to tunnel through proxy. Proxy returns "HTTP/1.1 504 Gateway Timeout"
    Kindly help.
    thanks
    Kamal

    Hi
    I am using the code in XML Gateway user guide for OTA Post over HTTPS. Am getting an IOException that i am unable to tunnel through the proxy.
    The user guide code can be seen here : http://docs.oracle.com/cd/E18727_01/doc.121/e12954/T319774T319783.htm
    But, when i use Chrome's REST Client and set the proxy to be same proxy as i use in the code above, I am getting a successful response.
    Am unable to understand the difference between both.
    The exception that i get is as below:
    Exception = java.io.IOException: Unable to tunnel through proxy. Proxy returns "HTTP/1.1 504 Gateway Timeout"
    Kindly help.
    thanks
    Kamal

  • Got error: Location Code is not enabled in the XML Gateway Server

    Hi,
    When I perform Compliance rule screening on GTM - Globel Trade Management,that I defined GTM as an Trading Partner on EBS R12.1.3,
    GTM can send response to EBS,but I see the following error message via Transaction Monitor on EBS workflow:
    [The Standard:OAG, Transaction Type:ITM , Transaction SubType:EXPORT_COMPLIANCE and Location Code GTM6.2 is not enabled in the XML Gateway Server. Pls check your Setup.]
    On EBS,I defined an ITM Partner for GTM,named 'GTM6.2',according to the document created by you: ITM Setup.doc
    and I also finished the following steps:
    1. ITM Application Users
    2.ITM Partner Service Types
    3.ITM Parameter Setup
    4.Order Type Creation: ITM Only
    5.Customer Creation: create a customer named 'GTM6.2', also enter 'GTM6.2' as EDI Location
    6.Define Transactions on XML Gateway as following:
    <Header>:
    Party Type: Customer
    Transaction Type: ITM
    Transaction Sub Type: EXPORT_COMPLIANCE
    <External Transactions (Lines)>:
    Standard Code: OAG
    External Transaction Type: ITM
    External Transaction Sub Type: EXPORT_COMPLAINCE
    Queue: APPLSYS.ECX_IN_OAG_Q
    7.Define Trading Partners on XML Gateway as following:
    <Header>:
    Trading Partner Type: Customer
    Trading Partner Name: GTM6.2
    <Trading Partner Details>:
    Transaction Type: ITM
    External Transaction Type: ITM
    External Transaction Sub Type: EXPORT_COMPLAINCE
    Map: WSHITEIN
    Source Trading Partner Location Code: GTM6.2 (same as the value what defined in EDI Location for customer)
    I think the combination of External Transaction Type, External Transaction Subtype, Standard Code,Source Trading Partner Location Code
    should be existing once done above steps, I have no idea why the error prompted.
    Does someone can tell how to trace the error?
    Thanks,
    Rambler

    user12254038 wrote:
    Can you send any supporting documents on ITM Setup? My client is implementing ITM for the first time and I wanted to know more details on how it works in R12.1.3 version of EBS?Oracle International Trade Management (ITM) Partner Integration: Specifications [ID 572524.1]
    International Trade Management Integration [ID 259691.1]
    How Can I Tell if International Trade Management is Installed or Not? [ID 742539.1]
    What are the Required Setups for International Trade Management (ITM) Flows in Shipping Execution? [ID 782861.1]
    What Patches Provide the Latest Fixes and Enhancements for ITM Adapter? [ID 465122.1]
    How to Generate Debug Information From ITM Adapter for XML Processing [ID 738925.1]
    How to Generate Debug File for International Trade Management (ITM) [ID 1294853.1]
    Thanks,
    Hussein

  • Steps to configure XML Gateway in Oracle

    Steps to configure XML Gateway in Oracle

    Hello,
    This is not relevant to Integration - B2B as you might want to post this query in Ebusiness suite forum.
    Rgds,Ramesh

  • B2b unable to pick the file from xml gateway

    Hi All,
    I am taking a scenario where B2B picks the files from xml gateway and drop the files in FTP folder. I modified the XML gateway inbound and outbound, i has given my user credentials(unmae, host ,pwd ,sid, port). In agreement in the place of internal delivery channel i has given XML gateway outbound.
    Still its unable to pick the files from xml gateway.
    Clarify my understanding please
    While b2b picks the files from xml gateway, It will pick from ECX_Inbound or ECX_Outbound?
    Here i am attaching the logs:
    2010.01.15 at 07:32:51:101: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
    2010.01.15 at 07:32:56:366: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
    2010.01.15 at 07:32:56:369: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
    2010.01.15 at 07:32:56:392: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
    2010.01.15 at 07:32:56:395: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
    2010.01.15 at 07:32:56:547: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
    2010.01.15 at 07:32:56:821: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
    2010.01.15 at 07:32:56:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
    2010.01.15 at 07:32:56:826: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
    2010.01.15 at 07:32:56:829: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
    2010.01.15 at 07:32:56:832: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
    2010.01.15 at 07:32:56:835: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
    2010.01.15 at 07:32:56:837: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
    2010.01.15 at 07:32:56:840: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
    2010.01.15 at 07:32:56:842: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
    2010.01.15 at 07:32:56:845: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
    2010.01.15 at 07:32:56:848: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over Internet
    2010.01.15 at 07:32:56:851: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
    2010.01.15 at 07:32:56:853: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
    2010.01.15 at 07:32:56:856: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
    2010.01.15 at 07:32:57:649: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
    2010.01.15 at 07:32:57:785: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
    2010.01.15 at 07:32:58:077: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
    2010.01.15 at 07:32:58:824: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
    2010.01.15 at 07:32:58:827: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
    2010.01.15 at 07:32:58:831: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
    2010.01.15 at 07:32:58:891: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
    2010.01.15 at 07:32:59:010: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
    2010.01.15 at 07:32:59:013: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
    2010.01.15 at 07:32:59:038: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
    2010.01.15 at 07:32:59:041: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
    2010.01.15 at 07:32:59:043: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
    2010.01.15 at 07:32:59:046: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
    2010.01.15 at 07:32:59:059: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
    2010.01.15 at 07:32:59:294: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
    2010.01.15 at 07:32:59:297: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: No Archive dir
    2010.01.15 at 07:32:59:300: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: marker :false
    2010.01.15 at 07:32:59:314: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO
    2010.01.15 at 07:32:59:322: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO file.receiver.wallet_location = /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
    file.receiver.wallet_password = *****
    file.receiver.polling_interval = 5
    file.receiver.path = /ftpdata/elshad1/ice/infile/850/PO
    file.receiver.marker = false
    marker = false
    ccc = false
    file.receiver.channel_mask = None
    file.receiver.minimum_age = 0
    filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
    file.receiver.van = false
    file.sender.channel_mask = None
    file.receiver.user = eiced1
    PROTOCOL_ENDPOINT = null
    file.receiver.password = *****
    file.receiver.preserve_filename = false
    transport_callout_waittime = 30
    preserve_filename = false
    file.receiver.ccc = false
    van = false
    polling_interval = 5
    2010.01.15 at 07:32:59:491: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Robin_FTP_TransportServer < ftp > < Emerson >]
    2010.01.15 at 07:32:59:858: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
    2010.01.15 at 07:32:59:864: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
    2010.01.15 at 07:32:59:949: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Outbound - initialize
    2010.01.15 at 07:32:59:953: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Obtaining outbound connection...
    2010.01.15 at 07:32:59:956: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
    2010.01.15 at 07:32:59:960: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound username: apps
    2010.01.15 at 07:33:04:319: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:33:04 GMT+00:00 2010 Outbound - initialize exit
    2010.01.15 at 07:33:04:322: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
    2010.01.15 at 07:33:04:326: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
    2010.01.15 at 07:33:04:329: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
    2010.01.15 at 07:33:04:332: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
    2010.01.15 at 07:33:04:335: B2BStarter thread: B2B8:15:32:157: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:32 GMT+00:00 2010 inbound username: apps
    2010.01.15 at 08:15:33:757: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 inbound initialize exit
    2010.01.15 at 08:15:33:761: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Outbound - initialize
    2010.01.15 at 08:15:33:764: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Obtaining outbound connection...
    2010.01.15 at 08:15:33:767: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
    2010.01.15 at 08:15:33:770: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound username: apps
    2010.01.15 at 08:15:34:473: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:34 GMT+00:00 2010 Outbound - initialize exit
    2010.01.15 at 08:15:34:476: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
    2010.01.15 at 08:15:34:479: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
    2010.01.15 at 08:15:34:481: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
    2010.01.15 at 08:15:34:484: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
    2010.01.15 at 08:15:34:487: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
    2010.01.15 at 08:15:35:928: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
    2010.01.15 at 08:15:36:132: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
    2010.01.15 at 08:15:36:139: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
    regards
    cnu

    Anuj,
    The log which i placed on top, thats the complete log and DC log is given below
    2010.01.18 at 12:58:06:117: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:11:130: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:16:143: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:21:153: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:26:169: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:31:164: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:36:173: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:41:182: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:46:194: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:51:210: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:56:217: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:01:244: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:06:254: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:11:256: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:16:283: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:21:276: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:26:285: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:31:297: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:36:314: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:41:324: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:46:327: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:51:341: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:56:352: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 13:00:01:359: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered

  • How to consume XML Gateway WS from a remote Oracle DB (10g)?

    Hi,
    I'm currently looking into consuming EBS web services, particularly the XML Gateway service from a remote database. For ease of use, I'm also using an Oracle 10g database.
    It seems there are several ways to skin a cat though. Hope you can help.
    1) Is it possible to use UTL_HTTP for this? If yes, can you please explain in detail as I have been trying to do this the past few days without success. Note, I was able to consume other web service examples, though. What url & SOAP action should I use?
    2) I built a proxy client stub using JDeveloper and deployed it to the DB. However my plsql procedure doesn't execute the java class. Any thoughts?
    Thanks,
    Charina

    Hi Charina,
    Regarding option 1), the url for the service endpoint and the value for the SOAPaction HTTP heaader are advertized in the WSDL for your service.
    The value of the utl is provided by the 'location' attribute for the soap:address element within a port.
    The value for the SOAPaction header is provided by the 'soapAction' attribute for the soap:operation element within a wsdl:binding/wsdl:operation element.
    You can have multiple ports and bindings advertized in a single WSDL. If this is the case for you, you need to make sure that the operation you are tryin to invoke is from the SOAP binding; the one with the transport attribute set to "http://schemas.xmlsoap.org/soap/http".
    Here is a WSDL snippet for illustration purposes:
      <binding name="CalculatePricePort" type="tns:CalculatePricePort">
        <soap:binding transport="http://schemas.xmlsoap.org/soap/http"
                      style="document"></soap:binding>
        <operation name="CalculatePrice">
          <soap:operation soapAction="document/http://siebel.com/OrderManagement/Quote/PSP:CalculatePrice"></soap:operation>
          <input>
            <soap:body use="literal"></soap:body>
          </input>
          <output>
            <soap:body use="literal"></soap:body>
          </output>
        </operation>
      </binding>
      <service name="CalculatePriceWS">
        <port binding="tns:CalculatePricePort" name="CalculatePricePort">
          <soap:address location="http://130.35.90.150/eai_enu/start.swe?SWEExtSource=SecureWebService&amp;SWEExtCmd=Execute&amp;UserName=XXXX&amp;Password=XXXX"></soap:address>
        </port>
      </service>Note that I took an example where both attributes are not using common format.
    To try to get this working faster, you may want to try to use an existing JAVA (or .Net) client and compare the working payload with what is generated by the UTL_HTTP package. It's usually faster to work of a working sample that to double guess why it's not working.
    Hope it helps,
    -Eric

Maybe you are looking for

  • Iweb not publishing to correct domain

    I am totally new to iweb and have just finished designing my website. I own both web hosting and a domain name with justhost.com I have set up ftp and when i try to publish my site, it does it to the wrong domain name. e.g. my domain is myweb.com the

  • Creating Activities Programmatically in CRM

    Hi, I am trying to use BAPI_ACTIVITYCRM_CREATEMULTI. This is called within a BAdI when a contact responds to a survey. I am evaluating the survey results and them trying to set the appropriate status. I am successfully screating the activity document

  • Issue in change pointers

    Hi , i am working on change pointers on ALE & IDOCs , i have created message type zitemxxxx,using bd52 ,i have activated using BD61 tcode, i am using one BADI using some condition in that badi if mara related fields only we have to update ,remaining

  • Building Address in T777A

    Hi, I am unable to maintain IT1028 for the Org unit. I am getting an error message: Location is not linked to Org structure. However, i have maintained Location to the ORg unit. I have maintained, the buidling address in table  T777A. I am unable to

  • I keep getting an error message "disallowed key characters"

    Over the last few weeks, safari displays the message "disallowed key characters" when I visit some sites. You can not browse cabkwards once this message comes up. I cleared cookies and restarted the iPad. The problem does not occur on an iPhone 4 or