ACE20 Rserver and VIP with the same IP

I have an ACE that I'm trying to get configured. I need a rserver to have the same ip address and a class map vip address. ex below.
rserver host RED
description REDS
ip address 172.95.94.250
inservice
serverfarm host REDS
transparent
rserver RED 9000
lass-map match-all stb-RED
2 match virtual-address 172.95.94.250 255.255.255.0 any
Shouldn't the transparent command under serverfarm allow this configuration? When I issue the class map command I get this error message.
Error: Entered VIP address is not the first address in the VIP range
software version
Software
loader: Version 12.2[121]
system: Version A2(3.6a) [build 3.0(0)A2(3.6a)]
system image file: [LCP] disk0:c6ace-t1k9-mz.A2_3_6a.bin
installed license: no feature license is installed

Hi,
This is correct; you cannot have the VIP and real using the same IP in the config. This will be seen as a Dup IP from the ACE perspective since it owns the VIP IP. How you do this is to configure the server with a unique IP from the subnet configured on the ACE server vlan. This is what you use to define the real in the config. The server IP needs to be L2 adjacent to the ACE for this to work. The transparent keyword tells the ACE to just L2 forward the traffic to the Mac address the real resolves to, but keeps the vip IP as the destination. This is why the server needs to be L2 adjacent to the ACE so that it can see the REALs actual mac address. Without the transparent keyword we NAT the VIP address to the REAL that gets the connections.
You will also need to create a loopback IP using the same address as the vip on the server.
The reason you need to use a loopback IP is so that the server does not arp for this address. You do not want the server to advertise that it owns this address since it is already assigned to the ACE VIP.
The link below is for IOS server load balancing but the loopback samples are still relevant.
http://www.cisco.com/c/en/us/support/docs/routers/7200-series-routers/10567-37.html#topic1
I hope this information is helpful
Best regards
Jim

Similar Messages

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

I have two iPhones and synchronize with the same macbook. How I do segregate both applications and data?

I have two iPhones and synchronize with the same macbook. How do I segregate both applications and all the data?

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

HT3204 Having purchased a Bluray of Les Mis with a digital download, I am unable to download the film through iTunes with each time I try it stops at 1.43GBytes. I have attempted both Win8 PC and iPad with the same result. Any ideas?

Having purchased a Bluray of Les Mis with a digital download, I am unable to download the film through iTunes with each time I try it stops at 1.43GBytes. I have attempted both Win8 PC and iPad with the same result. Any ideas?

Hello there, TindyBobbin.
Just to make sure, here is a Knowledge Base article that reviews the process for downloading a digital copy:
Transferring or downloading an iTunes Digital Copy
http://support.apple.com/kb/ht1539
If all of the steps still do not help with the download, you may want to follow what is mentioned at the bottom of all instructions:
If you are experiencing issues downloading your iTunes Digital Copy, please contact iTunes Store Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I want to sync my iphone, ipad, and macbook with the same username and password, is this possible

i want to sync my ipad, iphone, and macbook with the same username and password. is this possible and if so, how do i do it?

You mean with the same iCloud account?
If so, yes this is possible by accessing the iCloud account with the Mail.app on your Mac and with the iPad and iPhone Mail app. This allows for keeping server stored email account mailboxes synced between all three, syncing contacts, calendar events, notes, and Reminders synced between all three, and the same with the iCloud Photo Stream. In addition, you can have music, books, and apps purchased/downloaded from the iTunes store with one device automatically downloaded on the other devices.

TS1646 Can I have an ITunes account at more than one store (ie US and UK) with the same Apple ID or do I need a second one? Thanks

I spend time in both the US and the UK and sometimes not all apps are available in the US store which is my primary account. Can I set up a second account at the UK store with the same Apple ID?

You'll need to set up a second account with a different Apple ID. You cannot use a single Apple ID in two different iTunes Stores at the same time.
Regards.

Creative Cloud on pc and mac with the same license ?

Can I install Creative Cloud on 2 computers, one pc and one mac with the same license ?

Yes, a Creative Cloud subscription can be applied to two machines and they can be mixed platforms as well.

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

[ACE] Real servers and VIP in the same VLAN

Hello.
I´m facing an issue because the real servers and the VIP address are in the same VLAN, when a request comes from an external client to the VIP (crossing an ASA firewall) , the ACK gets back using the IP of one of the real servers instead of the VIP so this traffic is blocked by our WAN firewall probably due the inspection rules.
My question is if there is some way make the VIP the address who ACK´s that requests? Creating a new VLAN would be complicated because there are other services already running on those real servers.
Thanks a lot,
Miquel

Hi Miquel,
Please do source nat on ACE so that return traffic gets sent to ACE and not FW. Pasting an example for you.
     ==========================================================================
     One-Armed Load Balancing with VIP, Servers, & NAT Pool on the Same Subnet
     ==========================================================================
login timeout 0
access-list ANYONE line 10 extended permit ip any any
rserver host SERVER_01
ip address 192.168.1.11
inservice
rserver host SERVER_02
ip address 192.168.1.12
inservice
rserver host SERVER_03
ip address 192.168.1.13
inservice
serverfarm host REAL_SERVERS
rserver SERVER_01
    inservice
rserver SERVER_02
    inservice
rserver SERVER_03
    inservice
class-map match-all VIP-30
2 match virtual-address 192.168.1.30 tcp eq www
class-map type management match-any REMOTE_ACCESS
description remote-access-traffic-match
2 match protocol telnet any
3 match protocol ssh any
4 match protocol icmp any
policy-map type management first-match REMOTE_MGT
class REMOTE_ACCESS
    permit
policy-map type loadbalance first-match SLB_LOGIC
class class-default
    serverfarm REAL_SERVERS
policy-map multi-match CLIENT_VIPS
class VIP-30
    loadbalance vip inservice
    loadbalance policy SLB_LOGIC
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 451
interface vlan 451
description Servers vlan
ip address 192.168.1.2 255.255.255.0
access-group input ANYONE
service-policy input CLIENT_VIPS
nat-pool 1 192.168.1.10 192.168.1.10 netmask 255.255.255.0 pat
no shutdown
ip route 0.0.0.0 0.0.0.0 192.168.1.1
Let me know if you have any question.
Regards,
Kanwal

Is it possible to use Facetime between Mac and iPad with the same Apple ID?

Hello,
I have a MacBook Pro and an iPad. May MacBook is used by my wife and me at home. I take the Pad with me when I travel. On the MacBook I have and Apple ID registered. It is the same I use with the iPad. Do I need a differnt ID for my wife if we want to use Facetime? Or do I need to create a seperate user-profile for my wife on the MacBook?
Thanks for your feedback in advance.

Hi
I use the same apple id for the same thing when i travel between myself and people at home over my iphone and the ipad i leave at home always seems to work of for me
I normally just give it a little test before i leave each time by signing in of both devices and trying ringing myself
Hope this helps

Acting as router and partner with the same message type

Hi All
Let A and B be two companies communicating with each other
via a company called R. Some MSCONS messages will just be
routed, some MSCONS messages will be kept by R, processed
and then routed on. The only way to know if it should be
processed or not is to read some of its fields and compare
them with current state in the database owned by company
R. If company A sends a MSCONS to B via R, the sending and
receiving identification id in the message will belong to
A and B, not R.
To make it more complicated, there are about 200 companies
communicating via R in the same way as A and B. Further
more, MSCONS is only one out of about 15 types of message
routed under these conditions.
Any suggestions on how to apply B2B to this use case is
most appreciated.
Best regards
Pär

Hi
I have a hard time to get following use case to work.
If company A sends an MSCONS to company B and C via R, is there a
way to configure B2B in R so that only one agreement is needed even though
company B and C have different interchange id's?After sending a MSCONS from A to R (host) and I look in reports, I find
that the sender, receiver, exchange protocol, document protocol, and business
action has been identified, but state is set to error. When looking into the log
I find following.
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverQual, val = [ZZ]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [ZZ]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderID, val = [27700]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [Emix]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Value and doc parameter don't match
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverID, val = [10001]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [null]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Value doesn't match, doc parameter is null
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = Standard, val = [EDIFACT]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [EDIFACT]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeControlVersion, val = [2]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [2]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Interchange]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderQual, val = [ZZ]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [ZZ]
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = false
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = false
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = Actor
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit getLookUpError Key = key = [InterchangeSenderID] value = [27700] param = [Emix] Value = null
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit getLookUpError Key = key = [InterchangeReceiverID] value = [10001] param = [null] Value = null
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {7DDD0E19-7D9E-40AC-8DAC-A10BDB9AFB9E} position = 0
2007.09.25 at 17:32:47:516: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
2007.09.25 at 17:32:47:526: Thread-20: B2B - (DEBUG) iAudit report :
I do not want to add interchange sender id's 10001 and 27700 to
Document Protocol Parameters because then I make the document
protocol partner sensitive.
Any help is most welcome.
Best regards
Pär

How to measure and fill with the same transparency?

for example creating a fill using Edit > Fill with a random Color and Opacity in the Fill dialog, then later without the original information about the Color and Opacity but just the file, how can I make exact same fill and opacity again?

White represents 100% opacity, so, yes, 100 minus the black (K) percentage of gray in the mask is the equivalent of opacity. The Info panel can tell you colour and opacity of the displayed composite of visible layers under the pointer/cursor at any time.

Combobox and UseLOV with the same field

Hi,
i want use a Combobox which Select a Field name and after make a UseLov with this field name.
I can make the combobox with field name Column and i can separatly make a USELov with a field name, but i can't make it together.
Have tried two things create a new Bean with one method which call theses two methods and i have tried call the two methods directly in the JSP on the same field.
In each case the first method's call is ignored.
Thanks
Philippe
null

Philippe,
To do this you'd have to implement your own control.
Thanks
Blaise

Managing DB and AS with the same management tools ???

Hi,
I have Oracle 9i DB now running on Red Hat ES 3.
I plan to install on the same machine 10g AS R2.
My question is simple :
Does 10g AS include all the management tools to control both DB and AS ?
Or do i need to install 9i DB Management and Integration + AS Management tools ?
Thank you :)
G.Jachimiak

Well, it seems that a 10g Database and Oracle Enterprise Manager 10g Database Control are installed with OracleAS Metadata Repository.
So i don't need to install any 9i management tool, am i right ?
See : http://download-uk.oracle.com/docs/cd/B14099_11/core.1012/b13995/tools.htm#i1019484
2.1.1.3 Using Database Control to Manage an OracleAS Metadata Repository Database
Oracle Enterprise Manager 10g Database Control is installed and configured when you install the OracleAS Metadata Repository. As a result, you can use Database Control Console to manage the OracleAS Metadata Repository database.
The Database Control Console is similar to the Application Server Control Console, but it is designed to help you manage your Oracle database. It provides a Web-based user interface for performing database management tasks. For example, you can monitor the performance of the database, schedule backups, and manage the tablespaces of the database.
See Also:
Section 2.5, "Managing the OracleAS Metadata Repository Database with Database Control"
If you use OracleAS Metadata Repository Creation Assistant to install the OracleAS Metadata Repository in an existing database, Database Control will also be available if the existing database is an Oracle Database 10g database and if the Database Control was configured when the database was created.
Note that if you use Grid Control to manage your OracleAS Metadata Repository database, there is no need to use Database Control. All the features of Database Control are available from the database management pages within the Grid Control Console.
See Also:
Section 2.6, "About Oracle Enterprise Manager 10g Grid Control"

How to find out PR and PO with the same requestor and approver

object class = 'banf'
object value = PR or PO Number.
CDPOS - Fname ='FRGZU'
CDHDR - Object class = CDPOS - Object class and
CDHDR- Object id = CDPOS - Object id and
CDHDR - Changenr = CDPOS - Changenr and
CDPOS - Fname = Frgzu.
This is the logic can any one help me in getting the code

HI Param
I am somewhat confused with your requirement, is it to find the same reqested/ approver or to check the release status of PR/PO as you are using field FRGZU which indicates the release status of PR/PO.
Anyhow as per below conditions:
OBJECTCLAS is 'EBAN' for PR and 'EINKBELEG' for PO. Note that itz case-sensitive, hence use upper case.
OBJECTID is the document number
Please try to use FM: CHANGEDOCUMENT_READ for the same. This might be more convinient for you. Also try to restrict with date criteria.
Kind Regards
Eswar

ACE20 Rserver and VIP with the same IP

Similar Messages

Maybe you are looking for