Acer - 19" Widescreen Flat-Panel LCD HD Monitor

I have a question about the Acer - 19" Widescreen Flat-Panel LCD HD Monitor.
The link to the product:
Acer- 19" Widescreen
Under "Whats Included" it only says:
Acer 19" Widescreen Flat-Panel LCD HD Monitor
Owner's manual
Does that mean a power cord, and the cord to connect it to your computer isn't included, since its not listed under Whats Included? Or is it just a given that those two things are included, thus they dont waste time writting it out.
Hopefully I can get an answer before this deal goes away!
Thanks

Of course they do
There are no manufacturers that would sell monitors without the required things to run them!
The only exception is printers or television where they always make you buy the cables ...
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Similar Messages

  • Question about Dell-18.5" Widescreen Flat-Panel LCD Monitor-IN1910N

    I just bought this monitor, and now realize it doesn't have speakers in it.  I don't see where I would add them.  Can anyone help?  Could you please tell me know kind of speakers would work, and how I would attach them?  Kind of defeats the purpose if I can't listen to music or watch movies.  Thank you!

    zouly123 wrote:
    Thank you - do you know if I need a power adapter for it?
    It comes with whatever you need which includes a power adapter and audio cable.

  • Flat Panel LCD Computer Monitor Advice

    I'm building an FCP workstation and have been thinking about what type of computer monitor to purchase. My current monitor is a bulky CRT, so if anyone has any advice as far as what to look for in an LCD or good brands that have worked well for you it would be greatly appreciated.
    Thanks,
    Zap
    Dual 2 GHz Power Mac G5 / 2 GB Ram   Mac OS X (10.3.9)  

    hi ya, zappie!
    i've been going through this same thing in my head in preparation for a mac pro in the spring. plus, one of my vga monitors is nigh on ten years old and needs to be retired.
    i've looked into the dell monitors and the sony's and the apple 23 inch models. can't say that i'm overly impressed with any of these and especially the apple displays when reading posts about past and present color cast problems and other imaging issues.
    one model i need to demo before i purchase anything is this particular display, http://www.eizo.com/products/graphics/ce240w/index.asp
    read some nice reviews on this display and the five year warranty is nice as well.
    cheers!
    zeb

  • HP w2207h Widescreen Flat-Panel Monitor with BrightView

    I have an HP w2207h Widescreen Flat-Panel Monitor with BrightView Panel. Can't find the software download link for the BrightView part of it. Can anyone help me to locate that link again? Thank you

    Hello hermette,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are looking for the software for your HP w2207h 22 inch LCD Monitor. I am providing you with the HP w2207h 22 inch LCD Monitor Drivers page for your monitor. Simply click on the drop-down box and select the operating system you wish to download the software for and click on the NEXT button. Scroll down the page and you will see your drivers and/or software.
    ***NOTE: If you do not see your operating system in the drop-down then HP has no software or drivers that are supported and you will have to use the default Windows drivers. This could prevent you from being able to utilize some of the higher functions available to this monitor.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • UltraSharp 2407FPW 24.0-inch Wide Flat Panel LCD Monitor Supports HDCP,

    The Dell UltraSharp 2407FPW 24.0-inch Wide Flat Panel LCD Monitor Supports HDCP. I am going to order a Mac Pro and it has an Ati Radeon X1900 XT which is HDCP ready. But I really want an Apple Cinema 30 inch Display. Does anyone know how long it is going to take Apple to release the new displays with HDCP? And does anyone recommend the Dell Monitor> Is it better than the Apple Cinema Displays? Thank You.

    looking at both up close I think the 3007WFP looks nicer than the apple 30 inch, it also supports HDCP.

  • Urgent - iMac G4 Flat Panel - Is Adding Monitor or Flat Screen TV Possible?

    Hello,
    As a present to my husband (mac guru) I would like to know if with his iMac Flat Panel G4, is it better to buy a 28 inch samsung computer monitor (flat panel) that he can also hook up his mac to or a kind of flat screen/panel LCD TV. The guys at futureshop and bestbuy seem to be "confused" when talking about macs and not pcs. With the computer monitor, there seems to be questions on if we'll be able to hook up our satellite tv... and with the tvs, there seems to be confusion on if we can hook up the computer. One of the reasons I want to hook the computer directly is my husband has had problems converting (burning to DVD) some videos with music background from iPhoto without doing a software update which requires us to change the timing with the audio and video in our already created slideshows. Please help quickly as some sales finish tomorrow. I need to know what to tell the store... i.e. what kind of jack or cables or capability I am looking for. Do I ask for USB port, coaxil input or what? Thanks in advance,
    Karen

    Yes you can connect a display or monitor but exactly which ones depends on which iMac G4 you have. 
    All iMac G4s have a Mini VGA port this will allow you to connect any standard PC Monitor (with a VGA connector) and mirror the iMac's internal display only. The later iMac G4's also allow the connection of S-Video and Composite Video devices (most TV's have this type of input) which allows you to mirror the display on to the TV.
    The MiniVGA to VGA and Mini VGA to S-Video/Composite adaptors are for sale online in the Apple Store ($19US/£15) or here.
    If you wanted to extend the screen size again it is possible on some iMacs but requires a firmware hack that will invalidate your warranty.
    I can't understand how having an external display will solve the burning to DVD issues though.....
    Post back with your Screen size and processor speed for exact info - or read this recent post
    regards
    mrtotes

  • Can I use my iMac (Flat Panel) as a monitor for my laptops?

    Hi. I've got a MacBook, MacBook Pro, and a iMac Flat Panel. I'd like to use the Flat Panel as monitor for the two laptops (not simultaneously, of course.) Is this possible? If so, what's the best way to set it up?

    Download and set up ScreenRecycler.
    (31352)

  • HP w2558hc 25.5-inch Vivid Color Full HD Widescreen Flat Panel Monitor Remote Does Not Do Anything

    I just got the monitor and trying the new stuff out.  Hit a couple issues like ... I have tried the remote came attached to the monitor ... the little one in the slot ... but it does not change the volume or anything else . Is there something else I am to do to get to work. Allen

    I got the plastic cover off the battery and the battery came out with it, now I cannot put it back in, I suppose it has to slide under the lip but there is a little 'sort of' clip sticking out in the battery hole, below the model and serial number that stops the battery from sittiing properly in the slot.  Anyone experience this??  

  • Using a functioning iMac G4 flat panel as a monitor

    My precious computer is almost 5 years old.
    I seem to be fortunate, in that she still works beautifully (monitor and all).
    I am graduating soon, and am trying to find out if I can just try to raise the funds for a Mac mini, and use the display on my current machine as a monitor (thus saving me money).
    I've seen a few other postings about this sort of issue, but they all fall into one of three categories: 1) the motherboard on the G4 is dead and the poster would like to use the machine as a monitor, 2) someone wants to add a second monitor to the G4 and use both, or 3) the monitor on the G4 is dead and the poster wants to use another monitor with the working computer.
    My issue does not fall into any of these categories, as both my motherboard and monitor work, and I don't wish to have a second monitor. Is anyone familiar with this issue, or is this just a variation on type 1 above?

    SanfordR, Welcome to the discussion area!
    You might want to take a look at ScreenRecycler.

  • Powermac 8500 Flat Panel Monitor Options

    I have a PowerMac 8500 and my Apple Multiple Scan 15 monitor is making noises, the green power button flashes, the image distorts bowing inward on the left side, or the screen doesn't light up at all.
    What Apple branded flat panel monitors can be driven by my computer? The Mac 8500 has a DB 15 connector, I believe.
    Would I need an adapter to connect the flat panel display, and which adapter?
    I have 2 Apple Flat panel 17"? monitors that came with my G4's I could test, if I had an adapter. Is this a good idea?
    Thanking you in advance.

    You don't need to buy an Apple display. Any brand LCD display can be used with a Mac, provided that the computer had adequate graphics support for it, with a suitable hardware interface. If you buy a used display, be sure that it can be returned if there are any problems (like dead pixels). When you consider the initial cost of shipping and possible cost to return a bad display, I'd be reluctant to buy a used one at eBay. Many sold there are high-mileage units pulled from corporate use. If there are any retailers in your area selling used computers, I'd check with them first. At least you'd get to try it out before buying and avoid shipping expenses. Otherwise, the prices of new displays have dropped so much that buying one for your 8500 isn't money wasted, since the display can be used with any newer computer that you might purchase.
    Have you ever added VRAM to your 8500? It shipped with (2) factory-installed 1 MB VRAM cards, and is maxed out at 4 MBs with an additional pair of 1 MB VRAM cards. You might want to consider installing a Mac-compatible PCI graphics card having onboard SGRAM or DDR-memory, to provide better performance for a newer display. If you go with an older graphics card, you'd be better off buying a display with the standard 4:3 aspect ratio - like your old Apple display. The optimal resolution setting for a widescreen display (16:9 aspect ratio) may not be supported by older graphics cards. Two old (but still good) graphics cards are the ATI Rage Pro (8 MBs of SGRAM) or the ATI Rage128 (16 MBs of SGRAM). Both of these cards have a VGA port, eliminating the need for an adapter. You could find these for very little at eBay - but they must be Mac-compatible versions. Cards pulled from PCs aren't compatible, unless they can be re-programmed with a Mac ROM. A newer graphics card, like the Radeon 9200, would be capable of supporting any modern display, but costs more than your 8500 is worth. That's when you should consider investing the $$ in a slightly newer, used Mac (like a G4 tower) with AGP graphics.

  • Could I connect my PS3 to my Dell Flat-panel LED Monitor (s2309w)?

    So I own a dell 23 widescreen flat-panel led monitor (s2309w), is there some type of chord that I could buy to connect it to my PS3? This is what I have:
    http://accessories.dell.com/sna/products/displays/productdetail.aspx?c=ca&l=en&s=corp&sku=320-7339

    Simple answer is, you're not gonna be able to get audio with only your PS3, and that monitor without a receiver of some sort, or a TV with audio input.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • Supported flat panel displays for an ATI Rage 128 Pro/G4 500

    I originally was using an Apple 21" CRT display with my G4/500 until the display's picture tube failed. I am now looking to purchase a flat panel w/DVI, using my G4's DVI video port and the Rage 128 Pro card. I have found conflicting information on resolutions supported by the ATI card. I am looking at a Dell UltraSharp 2005FPW 20.1-inch Wide Aspect Flat Panel LCD, and the requirements indicate that my system must be able to support WSXGA+ resolution (1680 x 1050). A 24" version of the Dell monitor requires the support of WUXGA resolution (1920x1200). WIll either of these flat panel monitors work with my G4? If not, what specs do I need to look at to determine compatibility? Thanks.
    Apple G4 500   Mac OS X (10.3.1)   ATI Rage 128 Pro Graphics Card

    Hi JBernstein,
    Karl,
    I greatly appreciate your efforts to resolve my
    question.
    No worries, Mate!
    To address a question you posed earlier, no, my G4
    did not come with a ADC port. I have both VGA and
    DVI-D ports on my G4/500 (Graphite) with the Rage 128
    Pro ADP card, which is 16 mb and 2x.
    From that, I would infer that you computer is not ADC enabled.
    It was the Genius at
    the Apple Store who mentioned the Radeon 9000 card as
    a replacement. but he also suggested that the current
    20" Apple display would work with my G4 ... we tried
    that today, and the OS would not launch and power the
    display. SO, we must replace the card, or live with
    small displays.
    Yes, the ATY 128 Pro generally does not have enough grunt to power the larger displays.
    I did find a number of Radeon 9600 Pro Mac Edition
    video cards on eBay, but most had a published spec of
    4X, and the response to whether it was backwards
    compatible with the 2x capability in my G4/500 is
    that it will not work. Is that true?
    All the information I have (via the ATI website) does not specifically state that the 9600 card will support AGP 2X. Other ATI cards that do support 2X have this specifically stated in the information. Therefore, there is no garauntee that the 9600 card will support 2X. Until I receive information that someone has used this card in an AGP 2X computer with success, I cannot advise trying to use it.
    I have not
    confirmed the Radeon 8500 as yet, but as you might
    imagine, it is frustrating to get conflicting
    responses.
    The ATI Radeon 8500 will work in your computer (as, partially, will the 9000 - refer to my earlier posting).
    Perhaps you might address a different question ... is
    there any place within Apple that I can go, even with
    paying a fee for services, that would definitively
    provide an absolute solution to an upgrade type
    question, complete with exact part number AND
    guarantee that the information is quite accurate? Why
    wouldn't Apple provide some type of infomration on
    replacement/upgrade path for older products (geez ---
    the G4/500 Graphite isn't even on the legacy products
    list yet) so that the customer can invest and upgrade
    without going through a challenging process to get
    the right information? The information I've turned up
    is vague and not geared towards solutions like this.
    Apple, for all sorts of reasons (legal and commercial), is loath to provide "official" advice on the use of any third party upgrade hardware on their products. Moreover, discussions on the morality of this is probably against the terms and conditions of this discussion forum.
    I'm all ears as to how to move forward with this G4
    with a replacement card, if that is possible.
    The way I see it, you need either an ATI 8500/9000 if your only desired upgrade is the capacity to run larger displays, or an ATI 9800 is you wish to do gaming, graphics and be able to make full use of all the new Tiger graphics facilities.
    Cheers!
    Karl

  • Hooking up 17" LCD Flat Panel Apple Monitor to an older G4

    I have an older G4 and bought a 17" LCD Flat Panel Apple Monitor Studio Display to use with it. However, the plug from the monitor doesn't fit into any of the G4 connections. Am I crazy? I thought these monitors were created for the G4s. I tried the USB port, but nothing happened. Am I gonna have to get an adapter?
    Sorry to be so ignorant. Can anyone help?
    Thank you in advance.

    The Apple Studio Display 17 (LCD) \[Clear lucite with white] has an ADC connector. Displays with ADC connector require a computer that supplies the required 25 Volt power through the cable, or if you use a DVI to ADC converter (with its own AC power cord) you can use a display card with DVI connector.
    Which older G4 or what speed in MHz?
    The PCI graphics and AGP Graphics cannot supply the 25 Volts to power this display. Gigabit Ethernet and later have the Power supply and the fingers in the AGP slot to pass that power to an ADC-equipped card.

  • OT - flat panel video monitors?

    Anyone know anything about the Sony-lmd1420 monitor? Are there any issues with going with a flat panel vs. a CRT video monitor?
    Thanks.

    For color correction in FCP or Photoshop, you can hardly go wrong with a good pro CRT with SMPTE C phosphurs. But since a lot of folks these days are viewing on LCD TVs, it might not hurt to have both to judge by.
    -DH

  • I just bought a recertified Mac Mini, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.

    I just bought a recertified Mac Mini core duo - it's not the newer model-, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it  and using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.
    The company I bought it from is not Apple, and I may regret that. It was in my price range, though.
    This is the first time I've used this community, and I've been a Mac owner since 2000. Thanks in advance!

    when you say "Mac flat screen LCD", do you mean this:
    http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
    if it is, you might wanna try this:
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

Maybe you are looking for

  • Why do we create indexes for DSOs and Cubes.What is the use of it?

    Hi All, Can you please tell me why are indexes created for DSOs and Cubes. What is the use with the creation of indexes. Thanks, Sravani

  • JDBC adapter - polling application - is this efficient ?

    Hi, I have a scenario that is requesting data via the JDBC adapter from an SQL server system and sending the resultset into BW. This is polling every 10 minutes with the following statement : select * from itecs_dummy.dbo.action where current_timesta

  • Problem in downloading file using servlet

    Hello, I wnat to send a file throung servlet to my desktop program. when i call this servlet through internet explore it is working fine but when i call this in my desktop program then desktop program get nothing. my desktop program does not get anyt

  • Printing web pages on Tiger to HP LaserJets results in 79.01FE error

    I'm cross-posting this question on both Apple's and HP's support forums. I've seen a lot of talk about this problem on various forums but no answers... and the answer has to be somewhere in Apple or HP, 'cause it's not a user-based error. I've spent

  • WEBAUTH SSID ISSUE

    /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tableau Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-